Catalytic role of gold in gold-based catalysts: a density functional theory study on the CO oxidation on gold

Gold-based catalysts have been of intense interests in recent years, being regarded as a new generation of catalysts due to their unusually high catalytic performance. For example, CO oxidation on Au/TiO(2) has been found to occur at a temperature as low as 200 K. Despite extensive studies in the field, the microscopic mechanism of CO oxidation on Au-based catalysts remains controversial. Aiming to provide insight into the catalytic roles of Au, we have performed extensive density functional theory calculations for the elementary steps in CO oxidation on Au surfaces. O atom adsorption, CO adsorption, O(2) dissociation, and CO oxidation on a series of Au surfaces, including flat surfaces, defects and small clusters, have been investigated in detail. Many transition states involved are located, and the lowest energy pathways are determined. We find the following: (i) the most stable site for O atom on Au is the bridge site of step edge, not a kink site; (ii) O(2) dissociation on Au (O(2)-->2O(ad)) is hindered by high barriers with the lowest barrier being 0.93 eV on a step edge; (iii) CO can react with atomic O with a substantially lower barrier, 0.25 eV, on Au steps where CO can adsorb; (iv) CO can react with molecular O(2) on Au steps with a low barrier of 0.46 eV, which features an unsymmetrical four-center intermediate state (O-O-CO); and (v) O(2) can adsorb on the interface of Au/TiO(2) with a reasonable chemisorption energy. On the basis of our calculations, we suggest that (i) O(2) dissociation on Au surfaces including particles cannot occur at low temperatures; (ii) CO oxidation on Au/inactive-materials occurs on Au steps via a two-step mechanism: CO+O(2)-->CO(2)+O, and CO+O-->CO(2); and (iii) CO oxidation on Au/active-materials also follows the two-step mechanism with reactions occurring at the interface.     

Rhodium catalyzed hydroformylation of olefins

DFT and CCSD(T) methods were used to examine 61 different rhodium catalysts for the hydroformylation of ethylene. The carbon monoxide (CO) stretching frequency was a key electronic parameter to understand the π-accepting nature of the ligand. Normally, π-accepting ligands lead to increased CO stretching frequencies and a reduction in CO dissociation energy. There was no relationship between CO dissociation energy and CO stretching frequency. However, a clear relationship exists between the ethylene insertion barrier (from the rhodium dicarbonyl hydride resting state) and the CO stretching frequency as stronger π-accepting ligands systematically led to a reduction in the barrier. Due to the multistep nature of the rate-limiting step, the overall barrier can be divided into the CO/ethylene equilibrium and an intrinsic ethylene insertion barrier and both are systematically reduced as the π-accepting nature of the ligand is increased. A comparison of the carbonylation transition state (TS) to the ethylene insertion TS allowed us to understand reversibility of olefin insertion. While the ethylene insertion TS systematically decreases with increasing CO stretching frequency, the carbonylation TS is relatively flat. The lines cross at 2156 cm⁻¹ implying a change in the rate-limiting step in this region given a standard set of process conditions. © 2018 Wiley Periodicals, Inc.     

Fe(100)表面Cu单层膜上CO的吸附,解离以及C-C偶合反应

采用密度泛函方法研究了Fe(100)表面Cu单层膜上CO的吸附,直接解离,氢助解离以及C-C偶合反应.相比洁净的Fe(100)表面,在Fe(100)的单层Cu膜上,CO的吸附和活化都减弱了.特别是,相比Fe(100)上CO的解离能垒1.08 eV,铜单层膜上CO解离能垒高达2.4 eV.在H原子共吸附的情况下,Fe(1...     

193-nm photodissociation of acryloyl chloride to probe the unimolecular dissociation of CH2CHCO radicals and CH2CCO

The work presented here uses photofragment translational spectroscopy to investigate the primary and secondary dissociation channels of acryloyl chloride (CH2==CHCOCl) excited at 193 nm. Three primary channels were observed. Two C-Cl fission channels occur, one producing fragments with high kinetic recoil energies and the other producing fragments with low translational energies. These channels produced nascent CH2CHCO radicals with internal energies ranging from 23 to 66 kcal/mol for the high-translational-energy channel and from 50 to 68 kcal/mol for the low-translational-energy channel. We found that all nascent CH2CHCO radicals were unstable to CH2CH + CO formation, in agreement with the G3//B3LYP barrier height of 22.4 kcal/mol to within experimental and computational uncertainties. The third primary channel is HCl elimination. All of the nascent CH2CCO coproducts were found to have enough internal energy to dissociate, producing CH2C: + CO, in qualitative agreement with the G3//B3LYP barrier of 39.5 kcal/mol. We derive from the experimental results an upper limit of 23 +/- 3 kcal/mol for the zero-point-corrected barrier to the unimolecular dissociation of the CH2CHCO radical to form CH2CH + CO.     

An insight into alkali promotion: a density functional theory study of CO dissociation on K/Rh(111).

The important role of alkali additives in heterogeneous catalysis is, to a large extent, related to the high promotion effect they have on many fundamental reactions. The wide application of alkali additives in industry does not, however, reflect a thorough understanding of the mechanism of their promotional abilities. To investigate the physical origin of the alkali promotion effect, we have studied CO dissociation on clean Rh(111) and K-covered Rh(111) surfaces using density functional theory. By varying the position of potassium atoms relative to a dissociating CO, we have mapped out the importance of different K effects on the CO dissociation reactions. The K-induced changes in the reaction pathways and reaction barriers have been determined; in particular, a large reduction of the CO dissociation barrier has been identified. A thorough analysis of this promotion effect allows us to rationalize both the electronic and the geometrical factors that govern alkali promotion effect: (i) The extent of barrier reductions depends strongly on how close K is to the dissociating CO. (ii) Direct K-O bonding that is in a very short range plays a crucial role in reducing the barrier. (iii) K can have a rather long-range effect on the TS structure, which could reduce slightly the barriers.     

Adsorption and activation of CO over flat and stepped Co surfaces: a first principles analysis

The adsorption and activation of CO over flat Co{0001}, corrugated Co{1120}, and stepped Co{1012} and Co{1124} surfaces have been analyzed using periodic density functional theory calculations. CO strongly chemisorbs on all these surfaces but does not show a strong dependence on the surface structure. The calculated structure of adsorbed CO on Co{0001} at 1/3 monolayer (ML) of coverage was found to be in good agreement with the experiment. The barrier for CO dissociation over Co{0001} was found to decrease with decreasing CO coverage, taking on a value of 232 kJ/mol at 1/4 ML and 218 kJ/mol at 1/9 ML. The presence of the "zigzag" channel on Co{1120} enhances the reactivity slightly by reducing the barrier for CO dissociation to 195 kJ/mol. In contrast, the stepped Co{1012} and Co{1124} surfaces are much more active than the flat and corrugated surfaces. Both stepped surfaces provide direct channels for CO dissociation that do not have barriers with respect to gas-phase CO. In general the activation barriers lower as the reaction energies become more exothermic. Reconstruction of the step edges that occur in the product state, however, prevents a linear correlation between the reaction energy and the activation energy.     

Ab‐Initio calculations of the CO adsorption and dissociation on substitutional Fe–Cu surface alloys relevant to Fischer–Tropsch Synthesis: bcc‐(Cu)Fe(100) and fcc‐(Fe)Cu(100)

Direct CO dissociation is seen the main path of the first step in the Fischer–Tropsch Synthesis (FTS) on the reactive iron surfaces. Cu/Fe alloy film is addressed with various applications over face‐centered‐cubic (fcc)‐Cu and body‐centered‐cubic (bcc)‐Fe in the FTS, i.e. preventing iron carbide formation (through direct CO dissociation) by moderating the surface reactivity and facilitating the reduction of iron surfaces, respectively. In this study by density functional theory, the stable configurations of CO molecule on various Cu/Fe alloys over fcc‐Cu(100) and bcc‐Fe(100) surfaces with different CO coverage (25% and 50%) have been evaluated. Our results showed that the ensemble effect plays a fundamental role to CO adsorption energy on the surface alloys over bcc‐Fe(100); on the other hand, the ligand effect determines the CO stability on the fcc‐Cu(100) surface alloys. CO dissociation barrier was also calculated on the surface alloys that showed although the CO dissociation process is thermodynamically possible on the more reactive surface alloys, but according to their high barrier, CO dissociation does not occur directly on these surfaces. Copyright © 2013 John Wiley & Sons, Ltd.     

Prediction of a highly activated state of CO adsorbed on an Al/Fe(100) bimetallic surface

Using periodic slab density functional theory, we investigate CO adsorption, diffusion, and dissociation energetics on a monolayer of Al covering Fe(100) [Al/Fe(100)]. We predict a weakly chemisorbed state of CO to exist on Al/Fe(100), with CO adsorbing on the 4-fold hollow site in a very tilted fashion. This state is predicted to have an extremely low CO stretching frequency of only 883 cm(-1), indicating a dramatically weakened CO bond relative to gaseous CO, even though the molecule is predicted to bind to Al/Fe(100) quite weakly. We predict that dissociation of CO starting from this weakly adsorbed state has a barrier of only approximately 0.35 eV, which is approximately 0.70 eV lower than that on Fe(100). To understand how the underlying substrate changes the electronic properties of the supported Al monolayer, we compare CO adsorption on Al/Fe(100) to its adsorption on analogous pure Al(100) surfaces. This highly activated yet weakly bound state of CO on Al/Fe(100) suggests that Al/Fe(100) could be an effective low-temperature bimetallic catalyst in reducing environments.     

CO2在金属表面活化的能学方法研究

应用UBI-QEP方法, 估算了CO2-在金属表面的吸附热, 并计算了CO2在Cu(111)、Pd(111)、Fe(111)、Ni(111)表面的各种反应途径的活化能垒. 结果表明, CO2-在4种过渡金属表面相对的稳定性和CO2解离吸附的活性顺序一致,均为Fe>Ni>Cu>Pd. 说明CO2-可能是CO2解离吸附的关键中间体. 在Cu、Pd、Ni表面上, CO2解离吸附的最终产物是CO,而在Fe表面其最终会解离成C和O. 在Cu、Fe、Ni表面, CO2加氢活化是一种有效模式, 而在Pd上则不容易进行. 在Cu和Pd表面,碳酸盐物种也可能是CO2活化的重要中间体.     

CO Blocking of D2 Dissociative Adsorption on Ru(0001)

The influence of pre‐adsorbed CO on the dissociative adsorption of D₂ on Ru(0001) is studied by molecular‐beam techniques. We determine the initial dissociation probability of D₂ as a function of its kinetic energy for various CO pre‐coverages between 0.00 and 0.67 monolayers (ML) at a surface temperature of 180 K. The results indicate that CO blocks D₂ dissociation and perturbs the local surface reactivity up to the nearest‐neighbour Ru atoms. Non‐activated sticking and dissociation become less important with increasing CO coverage, and vanish at θ_CO≈0.33 ML. In addition, at high D₂ kinetic energy (>35 kJ mol^?1) the site‐blocking capability of CO decreases rapidly. These observations are attributed to a CO‐induced activation barrier for D₂ dissociation in the vicinity of CO molecules.     

Dissociation of carbonic acid: gas phase energetics and mechanism from ab initio metadynamics simulations

A comprehensive metadynamics study of the energetics, stability, conformational changes, and mechanism of dissociation of gas phase carbonic acid, H2CO3, yields significant new insight into these reactions. The equilibrium geometries, vibrational frequencies, and conformer energies calculated using the density functional theory are in good agreement with the previous theoretical predictions. At 315 K, the cis-cis conformer has a very short life time and transforms easily to the cis-trans conformer through a change in the O=C-O-H dihedral angle. The energy difference between the trans-trans and cis-trans conformers is very small (approximately 1 kcal/mol), but the trans-trans conformer is resistant to dissociation to carbon dioxide and water. The cis-trans conformer has a relatively short path for one of its hydroxyl groups to accept the proton from the other end of the molecule, resulting in a lower activation barrier for dissociation. Comparison of the free and potential energies of dissociation shows that the entropic contribution to the dissociation energy is less than 10%. The potential energy barrier for dissociation of H2CO3 to CO2 and H2O from the metadynamics calculations is 5-6 kcal/mol lower than in previous 0 K studies, possibly due to a combination of a finite temperature and more efficient sampling of the energy landscape in the metadynamics calculations. Gas phase carbonic acid dissociation is triggered by the dehydroxylation of one of the hydroxyl groups, which reorients as it approaches the proton on the other end of the molecule, thus facilitating a favorable H-O-H angle for the formation of a product H2O molecule. The major atomic reorganization of the other part of the molecule is a gradual straightening of the O=C=O bond. The metadynamics results provide a basis for future simulation of the more challenging carbonic acid-water system.     

氧在C－Ni（100）表面反应动力学的研究──Ⅰ．势能面特征

采用改进的ＬＥＰＳ势，通过求解广义本征方程计算了Ｏ２＋Ｃ－Ｎｉ（１００）表面反应的势能面．在碳原子被吸附于Ｎｉ（１００）表面的情况下，氧分子以不同的方式接近表面，通过势能面的计算以了解表面吸附原子与气相分子的反应途径与机理．     

Cu_2O(111)催化水煤气变换反应机理的理论研究

采用密度泛函理论结合周期平板模型方法系统地研究了水煤气变换反应在Cu_2O(111)表面上的反应机理,包括氧化还原机理、羧基机理和甲酸根机理.结果表明,在Cu_2O(111)表面,羧基机理和甲酸根机理均可行,且甲酸根机理更为有利,其最佳反应途径为H_2O~*→H~*+OH~*;CO(g)+H~*+OH~*→trans-HCOOH~*(1)→cis-HCOOH~*→CO_2~*+H_2(g).其中trans-HCOOH~*(1)→cis-HCOOH~*为其决速步,该基元反应的能垒仅为59 kJ·mol~(-1).羧基机理的最优反应路径同样是以H_2O的解离反应开始,随后CO(g)+OH~*→cis-COOH~*→trans-COOH~*→CO_2(g)+H~*,最后产生的两个吸附的H原子先迁移再结合生成H_2,整个反应的控速步骤为H原子的迁移,迁移能垒为96 kJ·mol~(-1).氧化还原机理则由于OH解离需要越过一个很高的能垒(254 vs.187 kJ·mol~(-1))而不可行.     

Probing the barrier for CH2CHCO --> CH2CH + CO by the velocity map imaging method

This work determines the dissociation barrier height for CH2CHCO --> CH2CH + CO using two-dimensional product velocity map imaging. The CH2CHCO radical is prepared under collision-free conditions from C-Cl bond fission in the photodissociation of acryloyl chloride at 235 nm. The nascent CH2CHCO radicals that do not dissociate to CH2CH + CO, about 73% of all the radicals produced, are detected using 157-nm photoionization. The Cl(2P(3/2)) and Cl(2P(1/2)) atomic fragments, momentum matched to both the stable and unstable radicals, are detected state selectively by resonance-enhanced multiphoton ionization at 235 nm. By comparing the total translational energy release distribution P(E(T)) derived from the measured recoil velocities of the Cl atoms with that derived from the momentum-matched radical cophotofragments which do not dissociate, the energy threshold at which the CH2CHCO radicals begin to dissociate is determined. Based on this energy threshold and conservation of energy, and using calculated C-Cl bond energies for the precursor to produce CH2CHC*O or C*H2CHCO, respectively, we have determined the forward dissociation barriers for the radical to dissociate to vinyl + CO. The experimentally determined barrier for CH2CHC*O --> CH2CH + CO is 21+/-2 kcal mol(-1), and the computed energy difference between the CH2CHC*O and the C*H2CHCO forms of the radical gives the corresponding barrier for C*H2CHCO --> CH2CH + CO to be 23+/-2 kcal mol(-1). This experimental determination is compared with predictions from electronic structure methods, including coupled-cluster, density-functional, and composite Gaussian-3-based methods. The comparison shows that density-functional theory predicts too low an energy for the C*H2CHCO radical, and thus too high a barrier energy, whereas both the Gaussian-3 and the coupled-cluster methods yield predictions in good agreement with experiment. The experiment also shows that acryloyl chloride can be used as a photolytic precursor at 235 nm of thermodynamically stable CH2CHC*O radicals, most with an internal energy distribution ranging from approximately 3 to approximately 21 kcal mol(-1). We discuss the results with respect to the prior work on the O(3P) + propargyl reaction and the analogous O(3P) + allyl system.     

CO在Pd平板与Pd38团簇表面上的催化氧化机理研究

采用密度泛函理论(DFT)计算模拟Pd平板和Pd_(38)团簇上的CO催化氧化过程,分析了CO在Pd催化剂表面上的氧化反应机理。结果表明,在Pd_(38)团簇模型上CO催化氧化的决速步骤是O_2的解离,反应能垒为0.65 eV,而在Pd平板模型上的决速步骤是CO的氧化,其反应能垒为0.87 eV。对比决速步骤的活化能发现,CO在Pd_(38)团簇上的氧化反应更易进行,说明CO氧化更易在小颗粒催化剂表面上进行,即Pd催化剂的活性与活性组分颗粒大小相关,活性组分颗粒越小,暴露的活性位点越多,其催化活性也越高。     

The rate-determining step in the rhodium-xantphos-catalysed hydroformylation of 1-octene

The rate-determining step in the hydroformylation of 1-octene, catalysed by the rhodium-Xantphos catalyst system, was determined by using a combination of experimentally determined (1)H/(2)H and (12)C/(13)C kinetic isotope effects and a theoretical approach. From the rates of hydroformylation and deuterioformylation, a small (1)H/(2)H isotope effect of 1.2 was determined for the hydride moiety of the rhodium catalyst. (12)C/(13)C isotope effects of 1.012(1) and 1.012(3) for the alpha-carbon and beta-carbon atoms of 1-octene were determined, respectively. Both quantum mechanics/molecular mechanics (QM/MM) and full quantum mechanics calculations were carried out on the key catalytic steps, for "real-world" ligand systems, to clarify whether alkene coordination or hydride migration is the rate-determining step. Our calculations (21.4 kcal mol(-1)) quantitatively reproduce the experimental energy barrier for CO dissociation (20.1 kcal mol(-1)) starting at the (bisphosphane)RhH(CO)(2) resting state. The barrier for hydride migration lies 3.8 kcal mol(-1) higher than the barrier for CO dissociation (experimentally determined trend approximately 3 kcal mol(-1)). The computed (1)H/(2)H and (12)C/(13)C kinetic isotope effects corroborate the results of the energy analysis.     

Dissociative adsorption of carbon monoxide on Mo(110): first-principles theory

The adsorption and dissociation of carbon monoxide on Mo (110) surface is studied with density functional theory. The results at different sites (atop, short bridge, long bridge, and hollow) are presented. The hollow site is found to be the most stable adsorption site for CO. The CO molecule is found to adsorb in end-on configurations (alpha states) at high coverage and inclined configurations (beta states) at low coverage. The dissociation activation energy from beta states is found to be approximately 1 eV lower than from alpha state. The adsorption of dissociation products, C and O, on Mo(110) has also been studied. The most stable adsorption site for C and O is long bridge and hollow site, respectively. The adsorption of C and O at low coverage is, in general, stronger than at high coverage, which is partly responsible for the high reactivity of CO dissociation at low coverage, since the binding energy of CO is not very sensitive to the coverage.     

Adsorption and protonation of CO2 on partially hydroxylated gamma-Al2O3 surfaces: a density functional theory study

Adsorption and protonation of CO2 on the (110) and (100) surfaces of gamma-Al2O3 have been studied using density functional theory slab calculations. On the dry (110) and (100) surfaces, the O-Al bridge sites were found to be energetically favorable for CO2 adsorption. The adsorbed CO2 was bound in a bidentate configuration across the O-Al bridge sites, forming a carbonate species. The strongest binding with an adsorption energy of 0.80 eV occurs at the O3c-Al5c bridge site of the (100) surface. Dissociation of water across the O-Al bridge sites resulted in partially hydroxylated surfaces, and the dissociation is energetically favorable on both surfaces. Water dissociation on the (110) surface has a barrier of 0.42 eV, but the same process on the (100) surface has no barrier with respect to the isolated water molecule. On the partially hydroxylated gamma-Al2O3 surfaces, a bicarbonate species was formed by protonating the carbonate species with the protons from neighboring hydroxyl groups. The energy difference between the bicarbonate species and the coadsorbed bidentate carbonate species and hydroxyls is only 0.04 eV on the (110) surface, but the difference reaches 0.97 eV on the (100) surface. The activation barrier for forming the bicarbonate species on the (100) surface, 0.42 eV, is also lower than that on the (110) surface (0.53 eV).     

A DFT study of the adsorption and dissociation of CO on Fe(100): influence of surface coverage on the nature of accessible adsorption states.

In the present article, we report adsorption energies, structures, and vibrational frequencies of CO on Fe(100) for several adsorption states and at three surface coverages. We have performed a full analysis of the vibrational frequencies of CO, thus determining what structures are stable adsorption states and characterizing the transition-state structure for CO dissociation. We have calculated the activation energy of dissociation of CO at 0.25 ML (ML = monolayers) as well as at 0.5 ML; we have studied the dissociation at 0.5 ML to quantify the destabilization effect on the CO(alpha3) molecules when a neighboring CO molecule dissociates. In addition, it is shown that the number and nature of likely adsorption states is coverage dependent. Evidence is presented that shows that the CO molecule adsorbs on Fe(100) at fourfold hollow sites with the molecular axis tilted away from the surface normal by 51.0 degrees. The asorprton energy of the CO molecule is -2.54 eV and the C-O stretching frequency is 1156 cm(-1). This adsorption state corresponds to the alpha3 molecular desorption state reported in temperature programmed desorption (TPD) experiments. However, the activation energy of dissociation of CO(alpha3) molecules at 0.25 ML is only 1.11 eV (approximately 25.60 kcal mol(-1)) and the gain in energy is -1.17 eV; thus, the dissociation of CO is largely favored at low coverages. The activation energy of dissociation of CO at 0.5 ML is 1.18 eV (approximately 27.21 kcal mol(-1)), very similar to that calculated at 0.25 ML. However, the dissociation reaction at 0.5 ML is slightly endothermic, with a total change in energy of 0.10 eV Consequently, molecular adsorption is stabilized with respect to CO dissociation when the CO coverage is increased from 0.25 to 0.5 ML.     

Metal-Oxo Electronic Tuning via In Situ CO Decoration for Promoting Methane Conversion to Oxygenates over Single-Atom Catalysts

Direct methane conversion (DMC) to oxygenates at low temperature is of great value but remains challenging due to the high energy barrier for C−H bond activation. Here, we report that in situ decoration of Pd₁-ZSM-5 single atom catalyst (SAC) by CO molecules significantly promoted the DMC reaction, giving the highest turnover frequency of 207 h⁻¹ ever reported at room temperature and ~100 % oxygenates selectivity with H₂O₂ as oxidant. Combined characterizations and DFT calculations illustrate that the C-atom of CO prefers to coordinate with Pd₁, which donates electrons to the Pd₁−O active center (L−Pd₁−O, L=CO) generated by H₂O₂ oxidation. The correspondingly improved electron density over Pd−O pair renders a favorable heterolytic dissociation of C−H bond with low energy barrier of 0.48 eV. Applying CO decoration strategy to M₁-ZSM-5 (M=Pd, Rh, Ru, Fe) enables improvement of oxygenates productivity by 3.2–11.3 times, highlighting the generalizability of this method in tuning metal-oxo electronic structure of SACs for efficient DMC process.