Ligand exchange chiral separations by cyclodextrin derivatives in capillary electrophoresis

A beta-cyclodextrin substituted by an imidazole-bound histamine (CDmh) was successfully used to separate underivatised tryptophan racemate in capillary electrophoresis in the presence of copper(II) ion by the ligand exchange mechanism. To the best of our knowledge, this is the first example of a cyclodextrin derivative behaving as the first coordination sphere ligand in the complex added to the background electrolyte (BGE).     

Prediction of selectivity for enantiomeric separations of uncharged compounds by capillary electrophoresis involving dual cyclodextrin systems

The single-isomer polyanionic cyclodextrin (CD) derivative heptakis-6-sulfato-beta-cyclodextrin (HSbetaCD) has been tested as chiral additive for the enantioseparation of non-steroidal anti-inflammatory drugs, such as fenoprofen, flurbiprofen, ibuprofen and ketoprofen, in capillary electrophoresis, using a pH 2.5 phosphoric acid-triethanolamine buffer in the reversed polarity mode. In most cases, the enantiomers of these acidic compounds, present in uncharged form at that pH, were only poorly resolved with HSbetaCD alone. However, the use of HSbetaCD in combination with the neutral CD derivative, heptakis-(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMbetaCD), which has a particularly high enantioselectivity towards these compounds, has led to complete enantioresolution in reasonably low migration times in most cases. Affinity constants for the enantiomers with the two cyclodextrins were determined, using linear regression in a two-step approach. Affinity constants with the charged HSbetaCD were first calculated in single systems while those with the neutral TMbetaCD were determined in dual systems. Selectivity for the enantiomeric separation of these compounds in dual CD systems could be predicted using recently developed mathematical models.     

Comparing cyclodextrin derivatives as chiral selectors for enantiomeric separation in capillary electrophoresis

A total of 26 different cyclodextrin (CD) derivatives with different functional groups and degrees of substitution were tested against 35 basic pharmaceutical compounds in an effort to investigate their effectiveness as chiral selectors for enantiomeric separation in capillary electrophoresis (CE). Testing was performed under the same conditions using a low pH buffer (25 mM phosphate buffer at pH approximately 2.5). Five CD derivatives, namely, highly sulfated-beta-CD, highly sulfated-beta-CD, hydroxypropyl-beta-CD (degree of substitution approximately 1), heptakis-(2,6-O-dimethyl)-beta-CD, and heptakis(2,3,6-O-trimethyl)-beta-CD were identified to be most effective for enantiomeric separations and have a wide range of enantiomeric selectivity towards the model compounds. Over 90% of the model compounds were enantiomerically resolved with the five identified CD derivatives, at a minimum resolution of 0.5. An additional 20 compounds were also tested to demonstrate the validity of the identified CD derivatives. The five CD derivatives were recommended as the starting chiral selectors in developing enantiomeric separation methods by CE.     

Degradingdehydroabietylisothiocyanate as a chiral derivatizing reagent for enantiomeric separations by capillary electrophoresis

Abietic acid is a naturally occurring enantiomeric diterpenic acid. Its absolute optical purity and very stable stereochemistry structure makes it an excellent starting material for preparing chiral derivatizing reagents for chromatographic or electrophoretic applications. This paper describes the synthesis and evaluation of a novel chiral derivatization reagent, i.e., degradingdehydroabietylisothiocyanate (DDHAIC) derived from dehydroabietic acid. Its applicability for the enantioseparation of racemic amino acids by CE was demonstrated. DDHAIC reacted readily with amino acids at an elevated temperature (70 degrees C). The resulting derivatives were highly stable and separable by MEKC. Separation of amino acid-DDHAIC diastereomers was achieved with a running buffer consisting of 50 mM Na(2)HPO(4) (pH 9.0), 18 mM SDS, and 25% v/v ACN. Under the conditions selected, diastereomers formed from ten pairs of tested amino acid enantiomers including D/L-Asn, D/L-Met, D/L-Leu, D/L-Phe, D/L-Trp, D/L-Ser, D/L-Val, D/L-Ala, D/L-Thr, and R/S-vigabatrin were well resolved. The resolution values were in the range of 0.95-8.9.     

Development of dinitrophenylated cyclodextrin derivatives for enhanced enantiomeric separations by high-performance liquid chromatography

The synthesis and evaluation of new dinitrophenyl (DNP) substituted beta-cyclodextrin (beta-CD) chiral stationary phases (CSPs) for the enantioseparation of various classes of chiral analytes by HPLC are presented. The dinitrophenyl substituted beta-CD derivatives are synthesized and covalently bonded to functionalized 5 microm spherical porous silica gel. These are the first reported derivatized cyclodextrin which contains pi-electron deficient substituents (i.e., pi-acidic moieties). The column performance in terms of their ability to separate enantiomers is evaluated. A variety of different dinitro-substituted aryl groups are investigated and compared. The pH of the mobile phase buffers, the buffer composition, the number and position of the dinitro groups on the phenyl ring substituent, the degree of substitution, and the bonding strategy all greatly affect the performance of the CSPs. A large variety of racemic compounds have been separated successfully on these CSPs. The bonded dinitrophenyl-derivatized cyclodextrins are stable in all three mobile phase modes, namely, the reversed-phase, polar organic, and normal phase modes. No degradation in column performance was observed in any mode of operation even after more than 1000 injections. The analytical applicability of these types of CSPs for enantiomeric separations is discussed in detail.     

Flow-through partial-filling affinity capillary electrophoresis using a crossreactive antibody for enantiomeric separations

It is demonstrated that the separation of diastereoisomers and enantiomers can be accomplished by the flow-through partial-filling affinity CE using a crossreactive mAb. This approach revealed differences in the binding strength of the (+/-)-cis- and (+/-)-trans-benzo[a]pyrene tetrols with the anti-polycyclic aromatic hydrocarbon mAb and demonstrated that (+)-enantiomers are more strongly immunocomplexed than their (-)-counterparts. It is proposed that crossreactive monoclonal antibodies (i.e. mAb raised against achiral molecule and possessing limited selectivity) could be effectively utilized for specific stereoisomeric differentiation and chiral separations.     

Hemispherodextrins, a new class of cyclodextrin derivatives, in capillary electrophoresis

A capped cyclodextrin derivative (THCMH), called hemispherodextrin, was observed to behave as a very efficient chiral selector for a variety of phenoxyacid enantiomeric pairs, both at pH 6 and pH 9. The very low concentration necessary to obtain separation was particularly impressive. The behaviour of THCMH was compared with that of other hemispherodextrins and cyclodextrin derivatives and the conclusions are reported. Some interesting conclusions are drawn by comparing the behaviour of THCMH with that of other hemispherodextrins reported elsewhere.     

Evaluation of chiral ionic liquids as additives to cyclodextrins for enantiomeric separations by capillary electrophoresis

A great interest has been drawn these last years towards ionic liquids in analytical chemistry, especially for separation methods. Recent synthesis of chiral ILs opened the way of the evaluation of new potential selectors for enantiomeric separations. This work focused on the evaluation of two chiral ILs (ethyl- and phenylcholine of bis(trifluoromethylsulfonyl)imide) by CE. Particular selectivities are awaited by exploiting unique ion-ion or ion-dipole interactions and by tailoring the nature of the cation and the anion. To evaluate such phenomena, a study was carried out with anti-inflammatory drugs 2-arylpropionic acids as model compounds. The results show that these chiral ILs did not present direct enantioselectivity with regard to these model analytes. The influence of chiral ILs in the electrolytes was then studied in the presence of classical chiral selectors (di- or trimethyl-beta-cyclodextrin). Although no general trend could be established, an increase in separation selectivity and resolution was observed in some cases, suggesting synergistic effects. The complementary determination of apparent inclusion constant values of these IL cations in the used cyclodextrins by affinity CE provided support to the understanding of the phenomena involved.     

Neutral cyclodextrins as chiral agents for enantiomeric separations of chromanes in capillary electrophoresis

Summary Six different cyclodextrins with varying cavity size and rim substitution were used as chiral agents for the enantiomeric separation of eight chromane compounds or analogues using capillary electrophoresis. It is shown that the cyclodextrin type and concentration have a large influence on the enantiomeric separation obtained for these compounds. A chiral resolution of 1.4 or better could be obtained for all the substances with either substituted heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin or unsubstituted γ-cyclodextrin as the chiral selector. The influence of the γ-cyclodextrin concentration, ionic strength and pH on the chiral separations was also investigated with a multivariate screening design. The detection limit and resolution of the present method allow determinations of the investigated compounds down to a chiral impurity of less than 0.1 % (area/area).     

Quantification of very low enantiomeric impurity of efaroxan using a dual cyclodextrin system by capillary electrophoresis

A rapid method for the enantiomeric purity determination of efaroxan has been developed by capillary electrophoresis (CE) using a dual cyclodextrin (CD) system. The influence of the nature and the concentration of CDs on separation parameters has been studied. High resolution (R_s = 7) and peak efficiency (104 000-121 000 theoretical plates) values were obtained for efaroxan enantiomers by adding two cyclodextrins, one neutral (7.5 mM DM-β-CD) and the other negatively charged (3 mM CM-β-CD) to the running buffer composed of 100 mM phosphoric acid-triethanolamine (pH 3). These resolution and peak efficiencies values allowed the quantitation of the (S)-enantiomer of efaroxan at very low enantiomeric excess even if the minor component migrates after the major one. This method was fully validated for the enantiomeric impurity determination of the (S)-form of efaroxan at the 0.05% level. Calibration curve, expressed by the peak areas ratio versus the enantiomeric purity was linear over the 0.05-1% enantiomeric impurity range (r² = 0.9996). Limits of detection (LOD) and quantification (LOQ), expressed in term of (S)-enantiomer impurity were 0.02% and 0.05%, respectively. The accuracy of the method at 0.12%, 0.50% and 0.80% enantiomeric impurity levels for the (S)-form were determined. Recoveries were in 94-102% range for each quality control sample and were determined with good precision (intra-day R.S.D. = 3.54%, inter-day R.S.D. = 5.33%).     

Chiral separations by host-guest complexation with cyclodextrin and crown ether in capillary zone electrophoresis

Summary Capillary zone electrophoresis using cyclodextrins and a chiral crown ether as buffer constituents was studied for the enantiomeric separation of drugs and amino acids. Based on results obtained from separation of racemic -amino acids both chiral selectors are compared with respect to resolution, efficiency and retention time. For (±)-Quinagolide effects of buffer composition and temperature are examined using -cyclodextrin as chiral agent. Optimum conditions were pH 2.5 at 30 mmol L^–1 -cyclodextrin. A linear dependence of retention on -cyclodextrin concentration allowed calculation of formation constants of the host-guest complexes. Buffer concentration and temperature also influence resolution. The application of a chiral crown ether to the separation of optical isomers in capillary zone electrophoresis is described for the first time. Chiral recognition of solutes depends on the formation of protonated alkyl amines and separation is attributed to the formation of diastereomeric host-guest complexes with different interactions for each enantiomer. The effects of crown ether concentration on resolution are presented.     

New cyclodextrin derivatives as chiral selectors in capillary electrophoresis

The separation of three pairs of enantiomeric herbicides has been successfully achieved by capillary electrophoresis at two different pH values in the presence of cyclodextrin derivatives previously synthesized in our laboratory. Two of these derivatives constitute a new class of receptor, the hemispherodextrins, in which a trehalose capping moiety is bonded to β-cyclodextrin. Because of their peculiar structure hemispherodextrins have very promising characteristics and the low receptor concentration required to achieve separation deserves particular interest.     

New cyclodextrin derivatives as chiral selectors in capillary electrophoresis

The separation of three pairs of enantiomeric herbicides has been successfully achieved by capillary electrophoresis at two different pH values in the presence of cyclodextrin derivatives previously synthesized in our laboratory. Two of these derivatives constitute a new class of receptor, the hemispherodextrins, in which a trehalose capping moiety is bonded to beta-cyclodextrin. Because of their peculiar structure hemispherodextrins have very promising characteristics and the low receptor concentration required to achieve separation deserves particular interest.     

Single-drop microextraction as a powerful pretreatment tool for capillary electrophoresis: A review

Single drop microextraction (SDME) is a convenient and powerful preconcentration and sample cleanup method for capillary electrophoresis (CE). In SDME, analytes are typically extracted from a sample donor solution into an acceptor drop hanging at the inlet tip of a capillary. The enriched drop is then introduced to the capillary for CE analysis. Since the volume of the acceptor drop can be as small as a few nanoliters, the consumption of solvents can be minimized and the preconcentration effect is enhanced. In addition, by covering the acceptor phase with an organic layer or by using an organic acceptor phase, inorganic ions such as salts in the sample solution can be blocked from entering the acceptor phase, providing desalting effects. Here, we describe the basic principles and instrumentation for SDME and its coupling with CE. We also review recent developments and applications of SDME-CE.     

Synergistic effects of ion-pairing in the enantiomeric separation of basic compounds with cyclodextrin derivatives in nonaqueous capillary electrophoresis

The enantiomeric separation of various kinds of basic pharmaceuticals has been investigated in nonaqueous capillary electrophoresis (NACE) systems using an ion-pairing reagent in combination with cyclodextrins (CDs). The simultaneous addition to the methanolic background electrolyte (BGE) of (+)-S-camphorsulfonate or alkanesulfonates and an anionic beta-cyclodextrin derivative, heptakis(2,3-dimethyl-6-sulfato)-beta-cyclodextrin (HDMS-beta-CD), led to partial or complete enantioresolution in most cases. In the absence of ion-pairing reagent, the enantiomeric resolution obtained with this CD derivative was most often completely lost or strongly reduced, indicating the important role of ion-pairing in the chiral recognition mechanism in these NACE systems. The influence of the nature and concentration of the counterion and the anionic CD derivative on the enantioseparation of basic compounds was studied. Synergistic effects between these two kinds of charged additives were clearly observed.     

Enantiomeric separations by nonaqueous capillary electrophoresis

This paper reviews the recent advances in enantioseparations by nonaqueous capillary electrophoresis (NACE) and the effect of organic solvents on mobility of enantiomers, separation selectivity and resolution. In general, the enantioseparation systems in NACE are similar to those of aqueous capillary electrophoresis (CE) except pure organic solvents are used. The influence of important parameters such as concentration and type of chiral selectors, apparent pH, ionic strength, temperature, and control of electroosmotic flow is discussed. In addition, the reported applications of NACE separations of racemates are presented.     

Chiral separation of deprenyl-N-oxide isomers by capillary electrophoresis using various cyclodextrin derivatives

Chiral separation of deprenyl-N-oxide isomers is presented using capillary electrophoresis in the presence of various cyclodextrin (CD) derivatives. This recently identified metabolite of R-(-)-deprenyl may possess desirable pharmacological activities. The effect of the cavity size and the substituents of the CD are examined on the enantiomer resolution of the compound having an asymmetric center on a heteroatom. The importance of hydrophilic or hydrogen bonding interaction, as well as the position of the interacting groups is demonstrated. Outstanding selectivity and resolution values are achieved using the chargeable carboxymethyl-beta-CD. 2-Hydroxypropyl-beta-CD is also suitable for the enantiomer separation of the analyte. Native beta-CD and carboxyethyl-beta-CD provide only poor enantioselectivity, whereas heptakis-(2,6-di-O-methyl)-beta-CD is capable of separating only the diastereomers. No chiral resolution can be observed in the presence of gamma-CD.     

Determination of enantiomeric excess by capillary electrophoresis

Capillary electrophoresis (CE) is becoming an established method for the determination of chiral trace impurities. This paper provides an overview of the state of the art of CE for such determinations. Detection limits of 0.1% impurity is widely accepted as a minimum requirement for chiral trace impurity determinations. This can be relatively easily achieved with CE. However, determination of lower concentrations requires careful optimization of the separation system. Four factors that are of particular significance for trace enantiomeric determinations: resolution, limit of detection, linear range and type of detection, are discussed. Further, the advantages and disadvantages of derivatization in this context are treated as well as the separation approach, ie., direct chiral separation or separation after the formation of diastereomers. It is concluded that the limit of impurity detection can be about 0.05% when UV detection is employed. Using laser-induced fluorescence detection, a quantitative determination at the 0.005% level is often possible.     

Non-covalent capillary coatings for protein separations in capillary electrophoresis

Adsorption of proteins, particularly basic proteins onto fused silica capillaries severely degrades capillary electrophoretic performance. This review provides a synopsis of the fundamentals underlying protein adsorption and its impact on CE performance. The efficacy of small molecule background electrolyte additives, surfactants, physically adsorbed polymers (dynamic and static), and successive multiple ionic-polymer layer coatings are evaluated using a number of performance metrics. Peak efficiency and migration time reproducibility are used as measures of reversible protein adsorption, while protein recovery, electroosmotic flow reproducibility and step changes in the baseline are used as indicators of irreversible protein adsorption.     

Method for enantiomeric purity of a quinuclidine candidate drug by capillary electrophoresis

A chiral procedure based on EKC was developed and validated for determination of the enantiomeric purity of PHA-543613, a drug candidate that was under development for treatment of the cognitive deficits of Alzheimer's disease and schizophrenia. Separation of enantiomers is accomplished via differential, enantiospecific complexation with a single-isomer, precisely sulfated beta-CD and heptakis-6-sulfato-beta-CD (HpS-beta-CD). Both neutral and sulfated CDs were screened before selecting HpS-beta-CD as the chiral selector. The separation is conducted in a 61 cm x 50 microm uncoated fused silica capillary with 25 mM HpS-beta-CD in pH 2.50, 25 mM lithium phosphate as the separation buffer with detection at 220 nm. Application of reverse polarity at -30 kV results in an elution time of about 12 min for PHA-543613 and 13 min for the undesired S-enantiomer. Quantification is versus an authentic reference S-enantiomer as an external standard in combination with an internal standard. The procedure was validated over the range 0.1-2.0% w/w. The detection limit is 0.01-0.02%. The amount of distomer intrinsic to the drug substance is about 0.1% or less. The developed method was used to generate stability data on multiple lots: in one case for up to 3 years.