Tunneling magnetoresistance in Ag/Co nanoparticle composites

Nanocomposite materials, consisting of ensembles of Ag and Co nanoparticles, have been successfully fabricated, with various compositions and packing densities. The transport and magnetic characteristics of the compounds were studied. In particular, a crossover from a positive magnetoresistance (MR) at low applied magnetic fields to a negative magnetoresistance at high applied magnetic fields was observed. The behaviors could be understood by the spin-dependent tunneling mechanism, known as tunneling magnetoresistance.     

Current-driven magnetization reversal and spin-wave excitations in Co /Cu /Co pillars

Using thin film pillars approximately 100 nm in diameter, containing two Co layers of different thicknesses separated by a Cu spacer, we examine the process by which the scattering from the ferromagnetic layers of spin-polarized currents flowing perpendicular to the layers causes controlled reversal of the moment direction in the thin Co layer. The well-defined geometry permits a quantitative analysis of this spin-transfer effect, allowing tests of competing theories for the mechanism and also new insight concerning magnetic damping. When large magnetic fields are applied, the spin-polarized current no longer fully reverses the magnetic moment, but instead stimulates spin-wave excitations.     

Current-induced excitations in single cobalt ferromagnetic layer nanopillars

Current-induced excitations in Cu/Co/Cu single ferromagnetic layer nanopillars ( approximately 50 nm in diameter) have been studied experimentally as a function of Co layer thickness at low temperatures for large applied fields perpendicular to the layers. For asymmetric junctions current-induced excitations are observed at high current densities for only one polarity of the current and are absent at the same current densities in symmetric junctions. These observations confirm recent predictions of spin-transfer torque induced spin-wave excitations in single layer junctions with a strong asymmetry in the spin accumulation in the leads.     

Anomalous anisotropic magnetoresistance in single-crystalline Co/SrTiO3(001) heterostructures

The anisotropic magnetoresistances (AMRs) in single crystalline Co(6 nm)/SrTiO₃(001) heterostructures from 5 K to 300 K with the current direction setting along either Co[100] or Co[110] are investigated in this work. The anomalous (normal) AMR is observed below (above) 100 K. With the current along Co[100] direction, the AMR shows negative longitudinal and positive transverse magnetoresistances at T< 100 K, while the AMR is inverse with the current along Co[110]. Meanwhile, the amplitude ratio between Co[110] and Co[100] is observed to be as large as 29 at 100 K. A crystal symmetry-adapted model of AMR demonstrates that interplay between the non-crystalline component and crossed AMR component results in the anomalous AMR. Our results may reveal more intriguing magneto-transport behaviors of film on SrTiO₃ or other perovskite oxides.     

Signatures of spin-glass freezing in Co/CoO nanospheres and nanodiscs

We present a study of the magnetic properties of Co nanoparticles having a combination of both spherical and disk shapes. The hcp Co nanospheres with an average diameter of 11 nm and nanodiscs of dimensions ∼2.5×15 nm² were prepared by thermal decomposition of di-cobalt octacarbonyl in the presence of an amine surfactant. The as-synthesized nanoparticles were oxidized to grow an antiferromagnetic layer. High resolution transmission electron microscopy showed the presence of a ferromagnet/antiferromagnet (Co/CoO) interface with a 2.2-nm thick CoO shell on the spherical nanoparticles and 0.5 nm thick on nanodiscs. We report the temperature and field dependent DC magnetization, frequency, field, and temperature dependent AC susceptibility, and the radio frequency transverse susceptibility. A low temperature paramagnetic behavior was observed in the DC magnetization at high fields and is assigned to defects in the CoO shell that are not coupled to the antiferromagnetic lattice. Our results support the existence of a low temperature frozen, disordered magnetic state, characterized by a strong exchange coupling between the structurally disordered, spin-glass CoO shell and Co core.     

Magnetization reversal and domains structures in (Co/Ni/Co/Pt) multilayers

Multilayers of [Co/Ni(t_Ni)/Co/Pt]_×4 are investigated for different Ni insertion layer thicknesses. The resulting magnetic properties and magnetic domain structures are compared with [Co/Ni]_×8 multilayers. As determined by magneto-optical Kerr effect microscopy and a vibrating sample magnetometer measurements, all multilayers exhibited a perpendicular magnetic anisotropy. It is found that the nucleation field and magnetic coercivity of [Co/Ni(t)/Co/Pt]_×4 multilayers are lower than (Co/Ni)_×8 and decreased with Ni thickness. Magnetization decay measurements reveal that these multilayers did not show an exponential decay behavior as was observed in rare earth transition metal alloys. Very narrow wires will remain stables for several hours even with an applied magnetic field closer to the coercivity. Insertion of very thin Ni in (Co/Pt) multilayers offers a good way to optimize the magnetic properties of the material and adjust the domain size for nanowire-based devices.     

Electrodeposition and characterization of Cu/Co multilayers: Effect of individual Co and Cu layers on GMR magnitude and behavior

The present work discusses the successful electrodeposition of Cu/Co multilayers, exhibiting appreciable GMR of 12-14% at room temperature. The effect of individual Cu and Co layers on the magnitude and behavior of GMR has been studied. By varying the thickness of individual layers the field at which saturation in GMR is observed can be controlled. It was observed that for lower thicknesses of Co layer, the saturation fields are reduced below 1 kOe. The Cu layer thickness seems to control the nature of magnetic coupling and the saturation field, with the two showing a correlation.     

Magnetic-field-induced enhancements of nuclear spin-lattice relaxation rates in the heavy-fermion superconductor CeCoIn5 using 59Co nuclear magnetic resonance

(59)Co nuclear spin-lattice relaxation has been measured for the heavy-fermion superconductor CeCoIn(5) in a range of applied fields directed parallel to the c axis. An enhanced normal-state relaxation rate, observed at low temperatures and fields just above H(c2)(0), is taken as a direct measure of the dynamical susceptibility and provides microscopic evidence for an antiferromagnetic instability. The results are well described using the self-consistent renormalized theory for two-dimensional antiferromagnetic spin fluctuations, and parameters obtained in the analysis are applied to previously reported specific heat and thermal expansion data with good agreement.     

Nuclear orientation of60Co in concentrated CoAu alloys

We report β-particle and γ-ray angular distribution measurements from⁶⁰Co oriented in CoAu at low temperatures in applied fields up to 72 kOe and Co concentrations of 0.95 to 11 at.%. The results are explained by assuming a random molecular field interaction between groups of Co impurities. The hyperfine field on Co nuclei in groups of three or more nearest neighbors is negative and has a value near ?180 kOe. The induced field on Co-pair nuclei is small and probably also negative. Complete polarization of the Co moments in the more concentrated alloys requires a very large applied field.     

Enhancement of magnetoresistance sensitivity in Co/Cu/NiFe trilayers by softening the Co hard layer

Co/Cu/NiFe trilayers were prepared by sputtering without magnetic field applied. We have found that the Co(2 nm)Cu(1 nm)NiFe(2 nm) trilayer using Ta as buffer layer exhibits an enhanced magnetoresistance (MR) sensitivity by a factor of more than 6 and a low saturation field of 9.3 Oe. Experimental results have demonstrated that the low saturation field is attributed to the softening of the Co layer by depositing the Co(2 nm)Cu(1 nm)NiFe(2 nm) sandwich on Ta layer. The decrease of the coercivity of the Co layer also plays an important role in the enhancement of MR sensitivity by reducing the effective coercivity of the NiFe layer, which is discussed in terms of the change in interlayer coupling.     

Magnetic behavior of Co nanostructures deposited in porous Al2O3 templates

The magnetic behavior as a function of magnetic field and temperature of nanostructures of Co deposited on insulator templates of Al₂O₃ is presented. The results show that the granular Co was formed inside the pores and the characteristics of granular ferromagnetics, such as high saturation of the magnetization and paramagnetic behavior at high magnetic fields, were observed.     

Magnetization reversal in exchange biased Co/CoO patterns

The influence of patterning on exchange bias has been investigated using arrays of micron-sized Co/CoO dots with different lateral confinement and length-to-width ratio. The patterned samples show higher coercive and exchange bias fields than a continuous Co/CoO bilayer. As in unpatterned film, magnetization reversal mechanisms on opposite sides of the hysteresis loops of the microstructured samples are different. However, with the increase of lateral confinement and shape anisotropy of the dots, the asymmetry in the magnetization reversal starts to differ from that observed in continuous Co/CoO films.     

A study of the induced magnetism in the Au spacer layer of Co/Au/CoO exchange-bias trilayers and related systems

We report the first observation of the effects of exchange bias on the nuclear spin polarization and induced magnetic moments at a magnetic/non-magnetic interface, applying low temperature nuclear orientation (LTNO) to Co/Au(x)/CoO trilayer systems. This technique allows us to determine simultaneously the average alignment of the nuclear moments for the two radioactive probe isotopes 198Au and 60Co with respect to an external magnetic field axis. The total average Au γ-ray anisotropy measured was found (i) to decrease with increasing Au thickness, indicating that large hyperfine fields are restricted to the interfacial Au layers and (ii) to be canted away from the applied field axis even when the Co layers are magnetically saturated. This canting was found to originate at the CoO/Au interface as could be shown from comparative measurements on CoO/Au/CoO trilayers containing two AFM CoO/Au interfaces and on a Co/Au/Co trilayer with two FM Co/Au interfaces. In the case of CoO/Au/CoO, the observed canting was found to be dependent on the Au layer thickness.     

Interplay of Rashba effect and spin Hall effect in perpendicular Pt/Co/MgO magnetic multilayers

The interplay of the Rashba effect and the spin Hall effect originating from current induced spin–orbit coupling was investigated in the as-deposited and annealed Pt/Co/MgO stacks with perpendicular magnetic anisotropy. The above two effects were analyzed based on Hall measurements under external magnetic fields longitudinal and vertical to dc current,respectively. The coercive field as a function of dc current in vertical mode with only the Rashba effect involved decreases due to thermal annealing. Meanwhile, spin orbit torques calculated from Hall resistance with only the spin Hall effect involved in the longitudinal mode decrease in the annealed sample. The experimental results prove that the bottom Pt/Co interface rather than the Co/MgO top one plays a more critical role in both Rashba effect and spin Hall effect.     

Anisotropic interface magnetoresistance in Pt/Co/Pt sandwiches

We report on an effect of reduced dimensionality on the magnetotransport in cobalt layers sandwiched by platinum. In a current in-plane geometry it is found that the resistivity depends on the magnetization orientation within the plane perpendicular to the current direction. The resistivity shows a symmetry adapted cos(2) dependence on the angle to the surface normal, with the maximum along the surface normal. The Co thickness dependence of the effect in Pt/Co/Pt sandwiches clearly points out that the mechanism behind this effect originates at the Co/Pt interfaces and is disparate to the texture induced geometrical size effect.     

Current-induced two-level fluctuations in pseudo-spin-valve (Co/Cu/Co) nanostructures

Two-level fluctuations of the magnetization state of pseudo-spin-valve pillars Co(10 nm)/Cu(10 nm)/Co(30 nm) embedded in electrodeposited nanowires ( approximately 40 nm in diameter, 6000 nm in length) are triggered by spin-polarized currents of 10(7) A/cm(2) at room temperature. The statistical properties of the residence times in the parallel and antiparallel magnetization states reveal two effects with qualitatively different dependences on current intensity. The current appears to have the effect of a field determined as the bias field required to equalize these times. The bias field changes sign when the current polarity is reversed. At this field, the effect of a current density of 10(7) A/cm(2) is to lower the mean time for switching down to the microsecond range. This effect is independent of the sign of the current and is interpreted in terms of an effective temperature for the magnetization.     

Large magnetothermoelectric power in Co/Cu, Fe/Cu and Fe/Cr multilayers

We report and discuss experimental data on the thermoelectric power of magnetic multilayers. Measurements of the thermoelectric power of Fe/Cr, Co/Cu and Fe/Cu multilayers have been carried out in the temperature range 4K < T < 150 K magnetic fields perpendicular to the layers. All specimens were found to exhibit pronounced magnetothermoelectric power (MTEP) effects correlating with their giant negative magnetoresistance. The main difference between the MTEP and the magnetoresistance is in their temperature dependence. Whereas the magnetoresistance is a decreasing function of temperature, the MTEP, at least in Co/Cu and Fe/Cu multilayers, is very small at low temperature and increases rapidly above 30–40 K. We ascribe this high temperature part of the MTEP to spin-dependent electron-magnon scattering and we propose a theoretical model.     

metamagnetic behavior of linear chain pyridine compounds: Co(Pyridine)2Cl2, Fe(Pyridine)2Cl2, Fe(Pyridine)2(NCS)2 and Ni(Pyridine)2Cl2

Magnetic phase transitions in the pyridine (pyr) compounds Co(pyr)₂Cl₂, Fe(pyr)₂Cl₂, Fe(pyr)₂(NCS)₂ and Ni(pyr)₂Cl₂ have been observed at applied magnetic fields of ～0.7, 0.7, 1.1 and 2.7 kG respectively. These low field phase transitions are observed in the Fe and Ni compounds at T = 4.2 K, and in the Co compound at T < 3K, and are consistent with metamagnetic behavior. Magnetic saturation is not achieved in any of these compounds for fields of 60 kG, reflecting high anisotropy.     

Specific features of the Hall effect in Cr/Co bilayer films

The Hall effect and magnetoresistance in Cr(50 Å)/Co(200 Å) bilayer films prepared by ion sputtering on a silicon substrate are investigated at room temperature. The planar Hall effect revealed in the bilayer films differs from the planar Hall effect observed usually in that it is symmetric with respect to the sign of the change in the rotation angle of the magnetic moment in the film plane. Under conditions where the symmetric planar Hall effect is realized, the change in the Hall resistance is more than 10% and exceeds the anisotropic magnetoresistance by two orders of magnitude. The hysteresis loops are measured at different orientations of magnetic fields. The planar Hall effect is studied in a weak longitudinal magnetic field. The results obtained demonstrate that the symmetric planar Hall effect is associated with the multidomain structure of the cobalt film in Cr/Co bilayer composites.     

Magnetization reversal process in thin Co nanowires

The magnetoresistance of single Co nanowires of various widths is investigated at low temperatures applying magnetic fields μ₀H up to 4.5 T. The in-plane longitudinal magnetoresistance shows pronounced features at coercive fields H_c explained by the anisotropic magnetoresistance indicating the magnetization reversal process. Monte Carlo simulations present the magnetization distribution during the reversal process, revealing different mechanisms depending on the wire width.