First principles study of oxygen adsorption on the anatase TiO2 (101) surface

The main objective of this study is to understand the sensing origin of anatase TiO₂ and provide an insight into why gas sensitivity of anatase TiO₂ is not so excellent.

1. Download : Download full-size image

     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

Acetaldehyde photochemistry on TiO2(1 1 0)

The ultraviolet (UV) photon induced decomposition of acetaldehyde adsorbed on the oxidized rutile TiO₂(1 1 0) surface was studied with photon stimulated desorption (PSD) and thermal programmed desorption (TPD). Acetaldehyde desorbs molecularly from TiO₂(1 1 0) with minor decomposition channels yielding butene on the reduced TiO₂ surface and acetate on the oxidized TiO₂ surface. Acetaldehyde adsorbed on oxidized TiO₂(1 1 0) undergoes a facile thermal reaction to form a photoactive acetaldehyde–oxygen complex. UV irradiation of the acetaldehyde–oxygen complex initiated photofragmentation of the complex resulting in the ejection of methyl radical into gas phase and conversion of the surface bound fragment to formate.     

Adsorption of Xe atoms on the TiO2(1 1 0) surface: A density functional study

The interaction of xenon atoms with the TiO₂(1 1 0) surface of rutile has been studied by density functional theory methods. Five different possible adsorption sites on the relaxed and clean TiO₂(1 1 0) surface and on two different type of oxygen vacancies possible on this oxide substrate have been considered. In the case of the defect-free substrate, and when compared with a previous study concerning the adsorption of Ar atoms also on TiO₂(1 1 0), the xenon atom, as a larger and easier polarizable species, is shown to have a deeper physisorption well, as expected. Likewise, Xe atoms prefer to be bounded to positions nearby the outermost titanium atoms as found previously for Ar. This is in agreement with most studies concerning rare gases adsorbed on transition metal surfaces. In the case of the reduced surfaces, it is found that the interaction is more favourable in the protruding rows. The interaction is dominated by dispersion forces and DFT + dispersion energies are 3.5–5 times larger than the non-corrected DFT values and Xe-surface distances are smaller. Finally, an interesting correlation is obtained for the calculated interaction energies and the Xe–Ti distance.     

Density functional study of the adsorption of aspirin on the hydroxylated (0 0 1) -quartz surface

In this study the adsorption geometry of aspirin molecule on a hydroxylated (0 0 1) α-quartz surface has been investigated using DFT calculations. The optimized adsorption geometry indicates that both, adsorbed molecule and substrate are strongly deformed. Strong hydrogen bonding between aspirin and surface hydroxyls, leads to the breaking of the original hydroxyl–hydroxyl hydrogen bonds (Hydrogenbridges) on the surface. In this case new hydrogen bonds on the hydroxylated (0 0 1) α-quartz surface appear which significantly differ from those at the clean surface. The 1.11 eV adsorption energy reveals that the interaction of aspirin with α-quartz is an exothermic chemical interaction.     

Coverage effects on the adsorption of sulfur on Co(0 0 0 1): A DFT study

The adsorption of sulfur on Co(0 0 0 1) was studied using density functional theory calculations at coverage from 0.11 ML to 1.0 ML. Calculated results indicate that atomic S favors in hollow sites with bond S–Co dominated at lower coverage and at higher coverage the strong adsorbate S–S interaction leads to the formation of S₂ species. It was shown that the adsorption energy generally increases (gets weaker) with the coverage in a near linear fashion for the most stable configurations. In addition, modification of the surface electronic properties has been discussed and some discrepancy are found between our calculations and the findings of O adsorption on Au(1 1 1) and Pt(1 1 1) surfaces.     

Surface states and accumulation nanolayer induced by Ba and Cs adsorption on the n-GaN(0 0 0 1) surface

The Ba and Cs adsorption on the n-GaN(0 0 0 1) surface has been studied in situ by the threshold photoemission spectroscopy using s- and p-polarized light excitation. Two surface bands induced by Ba (Cs) adsorption are revealed in surface photoemission spectra below the Fermi level. The surface-Fermi level position is found to be changed from significantly below the conduction band minimum (CBM) at clean n-GaN surface to high above the CBM at Ba, Cs/n-GaN interfaces, with the transition from depletion to electron accumulation occurring at low coverages. Photoemission from the accumulation nanolayer is found to excite by visible light in the transparency region of GaN. Appearance of an oscillation structure in threshold photoemission spectra of the Ba, Cs/n-GaN interfaces with existing the accumulation layer is found to originate from Fabry–Perot interference in the transparency region of GaN.     

Entropy-driven adsorption of carbon nanotubes on (0 0 1) and (1 1 1) surfaces of CeO2 islands grown on sapphire substrate

According to the aim to compose combinatorial material by adsorption of carbon nanotubes onto the structured CeO₂ surface the interaction of the armchair (5,5) and zigzag (8,0) nanotubes with the (0 0 1) and (1 1 1) surfaces of CeO₂ islands have been investigated by theoretical methods. The thermodynamics of the adsorption were studied at the low surface coverage region. The interaction energy between the nanotube and the different CeO₂ surfaces shows significant increase when the size of the interface reaches 7–8 unit cells of CeO₂ and it remains unchanged in the larger interface region. However, the entropy term of the adsorption is significantly high when the distances of CeO₂ islands are equal to 27 nm (adsorption of armchair (5,5) nanotube) or 32 nm (adsorption of zigzag (8,0) nanotube). This property supports adsorption of nanotubes onto CeO₂ surfaces which possesses a very specific surface morphology. A long-wave vibration of nanotubes was identified as background of this unexpected phenomenon. This observation could be applicable in the development of such procedures where the nanotube adsorption parallel to the surface is aimed to perform.     

Computational study of cycloaddition reactions on the SiC(1 0 0)-c(2 × 2) surface

Cycloaddition reactions between 1,3-butadiene and the C-terminated SiC(1 0 0)-c(2 × 2) surface have been addressed using quantum-chemical methods. The c(2 × 2) structure consists of ---CC--- bridges between underlayer Si atoms which themselves form Si---Si bonds. Of various possible reaction products, the one formed by a [2 + 4] reaction with the ---CC--- bridge (giving a species resembling 1,4-cyclohexadiene) is the lowest in energy. Density functional calculations for the bare c(2 × 2) surface, using a cluster model with mechanical embedding, gave good agreement with structural parameters obtained in previous fully ab initio studies. Similar calculations for the cycloaddition product and for the transition state gave a reaction energy of −50.3 kcal/mol and an activation energy of +6.1 kcal/mol to form a planar ring structure lying normal to the surface. Detailed results for the frequency and infrared polarization behavior of adsorbate vibrational modes have also been obtained.     

Optical characterization of methanol adsorption on the bare and oxygen precovered Cu(1 1 0) surface

We have studied the adsorption and reaction of methanol on the bare and oxygen precovered Cu(1 1 0) surface at 200 K using reflectance difference spectroscopy (RDS). On the bare and fully oxygen covered surface, the sticking coefficient is close to zero. In contrast, on the partially oxygen covered surface, a sticking coefficient close to unity is obtained. This observation suggests a high mobility of methanol on both bare and oxygen covered Cu(1 1 0) and of methoxy on Cu(1 1 0). Two reaction regimes, an oxygen supply limited and an adsorption site limited regime are identified. The transition between these two regimes occurs for an oxygen coverage of about 0.2.     

Atomic and electronic properties of furan on the Si(0 0 1)-(2 × 2) surface

The atomic and electronic properties of the adsorption of furan (C₄H₄O) molecule on the Si(1 0 0)-(2 × 2) surface have been studied using ab initio calculations based on pseudopotential and density functional theory. We have considered two possible chemisorption mechanisms: (i) [4 + 2] and (ii) [2 + 2] cycloaddition reactions. We have found that the [4 + 2] interaction mechanism was energetically more favorable than the [2 + 2] mechanism, by about 0.2 eV/molecule. The average angle between the CC double bond and Si(1 0 0) surface normal was found to be 22°, which is somewhat smaller than the experimental value of 28°, but somewhat bigger than other theoretical value of 19°. The electronic band structure, chemical bonds, and theoretical scanning tunneling microscopy images have also been calculated. We have determined a total of six surface states (one unoccupied and five occupied) in the fundamental band gap. Our results are seen to be in good agreement with the recent near edge X-ray absorption fine structure and high resolution photoemission spectroscopy data.     

Gd adsorption on the Mo(2 1 1) surface

The adsorption of Gd thin layers on the Mo(2 1 1) face was investigated by using Auger electron spectroscopy (AES), low electron energy diffraction (LEED), scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS) and measurements of the work function changes (Δφ). It was found that at 300 K Gd does not form any dilute chain structures and from the very beginning of the adsorption process Gd forms a densely packed layer. The dilute p(4 × 1) chain structure was observed by LEED after annealing thin layers (θ < 1 ML) to temperatures above 770 K. STM images confirm the existence of the p(4 × 1) structure islands. The intermixing of the substrate and adsorbate atoms takes place.     

Adsorption of Ag on Si(1 0 0) surface

The chemisorption of one monolayer Ag atoms on an ideal Si(1 0 0) surface is studied by using the self-consistent tight-binding linear muffin-tin orbital method. The adsorption energies (E_ad) of different sites are calculated. It is found that the adsorbed Ag atoms are more favorable on C site (fourfold site) than on any other sites on Si(1 0 0) surface, the polar covalent bond is formed between Ag atom and surface Si atom, a Ag and Si mixed layer does not exist and does form an abrupt interface at the Ag–Si(1 0 0) interface. This is in agreement with the experiment results. The layer-projected density of states is calculated and compared with that of the clean surface. The charge transfer is also investigated. Comparing with the Au/Si(1 0 0) system, the interaction is weaker between Ag and Si than between Au and Si.     

Atomic and electronic structure of group-IV adsorbates on the GaAs(0 0 1)-(1 × 2) surface

Ab initio calculations, based on pseudopotentials and density functional theory, have been performed to investigate the atomic and electronic structure of the group-IV adsorbates (C, Si, Ge, Sn, and Pb) on the GaAs(0 0 1)-(1 × 2) surface considered in two different models: (i) non-segregated Ga-IV-capped structure and (ii) segregated structure in which the group-IV atoms occupying the second layer while the As atom floats to the surface. The non-segregated structure is energetically more favorable than the segregated structure for Sn and Pb, whereas it is the other way around for C, Si, and Ge.     

First-principles study on anatase TiO2（101） surface adsorption of NO

In this paper, the stable structure and the electronic and optical properties of nitric oxide （NO） adsorption on the anatase TiO2 （101） surface are studied using the plane-wave ultrasoft pseudopotential method, which is based on the density functional theory. NO adsorption on the surface is weak when the outermost layer terminates on twofold coordinated oxygen atoms, but it is remarkably enhanced on the surface containing O vacancy defects. The higher the concentration of oxygen vacancy defects, the stronger the adsorption is. The adsorption energies are 3.4528 eV （N end adsorption）, 2.6770 eV （O end adsorption）, and 4.1437 eV （horizontal adsorption）. The adsorption process is exothermic, resulting in a more stable adsorption structure. Furthermore, O vacancy defects on the TiO2 （101） surface significantly contribute to the absorption of visible light in a relatively low-energy region. A new absorption peak in the low-energy region, corresponding to an energy of 0.9 eV, is observed. However, the TiO2 （101） surface structure exhibits weak absorption in the low-energy region of visible light after NO adsorption.     

Structural and dynamical properties of Ru(0 0 0 1) surface

I performed density functional theory (DFT) calculations combined with MD simulations to study the structural relaxation of Ru(0001) surface. The surface relaxation of the topmost layer is found to be about ?4% at absolute zero temperature. Using MD simulations in the temperatures range of 50 K and 900 K, the effect is found to be minor on the surface relaxation as compared to Pd (1 1 1) clean surface. The effect of surface vibration is also investigated using a LEED code and shows no effect of the vibrational level on the IV curves, which rules out any disagreement between proper theory and LEED results of well prepared surfaces.     

Electronic surface states of Cu(1 1 0) surface

Surface states are a unique and important class of quantum states that shave an important effect on the electronic properties of Cu(1 1 0) surface. The Cu(1 1 0) surface has been studied using ultraviolet photoemission spectroscopy (PES), inverse photoemission spectroscopy (IPES), and reflection anisotropy spectroscopy (RAS), and shows a resonance in the RAS spectra at 2.1 eV due to a transition between occupied and unoccupied surface states. The unoccupied surface state involved in the RAS transition at an energy of 1.7 eV at the point of the surface Brillouin zone has been investigated using IPES and the occupied surface state is seen in PES spectra at 0.45 eV below the Fermi level. The energy difference of the surface states, 2.15 eV, is a good match to the transition energy found in the RAS experiments.