A DFT study of the transition metal promotion effect on ethylene chemisorption on Co(0 0 0 1)

Transition metals are often introduced to a catalyst as promoters to improve catalytic performance. In this work, we study the promotion effect of transition metals on Co, the preferred catalytic metal for Fischer–Tropsch synthesis because of its good compromise of activity, selectivity and stability, for ethylene chemisorption using density functional theory (DFT) calculations, aiming to provide some insight into improving the α-olefin selectivity. In order to obtain the general trend of influence on ethylene chemisorption, twelve transition metals (Zr, Mn, Re, Ru, Rh, Ir, Ni, Pd, Pt, Cu, Ag and Au) are calculated. We find that the late transition metals (e.g. Pd and Cu) can decrease ethylene chemisorption energy. These results suggest that the addition of the late transition metals may improve α-olefin selectivity. Electronic structure analyses (both charge density distributions and density of states) are also performed and the understanding of calculated results is presented.     

DFT calculations of adenine adsorption on coin metal (1 1 0) surfaces

Density functional theory is used to analyze in detail the adsorption of the adenine molecule on the (1 1 0) surfaces of Cu, Ag, and Au. While the adsorption configurations are similar in all three cases – the molecule bonds via two nitrogen atoms to the substrate – the details like charge transfer or local strain a rather different. The molecule–substrate interaction in case of Cu is stronger than for the more noble metals Ag and Au. Longe-range dispersion forces stabilize the adsorption configuration in dependence on the specific adsorption geometry. In case of Ag and Au, relativistic effects are found to be important.     

Sulphur adsorption on Au{1 1 0}: DFT and LEED study

The adsorption of sulphur on clean reconstructed Au{1 1 0}-(1 × 2) surface was studied using density functional theory (DFT) and quantitative low energy electron diffraction (LEED) calculations. The results show that the sulphur atoms form a (4 × 2) ordered structure which preserves the missing row reconstruction of the clean surface. The sulphur atom is found to adsorb on threefold hollow sites, on the {1 1 1} microfacets that border the trenches of the missing rows.     

Sulfur adsorption on Fe(1 1 0): a DFT study

The adsorption of atomic S on the Fe(1 1 0) surface is examined using density functional theory (DFT). Three different adsorption sites are considered, including the atop, hollow and bridge sites and the S is adsorbed at a quarter monolayer coverage in a p(2 × 2) arrangement. The hollow site is found to be the most stable, followed by the bridge and atop sites. At all three sites, S adsorption results in relatively minor surface reconstruction, with the most significant being that for the hollow site, with lateral displacements of 0.09 Å. Comparisons between S-adsorbed and pure Fe surfaces revealed reductions in the magnetic moments of surface-layer Fe atoms in the vicinity of the S. At the hollow site, the presence of S causes an increase in the surface Fe d-orbital density of states between 4 and 5 eV. However, S adsorption has no significant effect on the structure and magnetic properties of the lower substrate layers.     

Adsorption of methanol and methoxy on NiAl(1 1 0) and Ni3Al(1 1 1): A DFT study

The adsorption of methanol and methoxy on NiAl(1 1 0) and Ni₃Al(1 1 1) has been investigated using density functional theory (DFT). Optimised adsorption geometries and core level shifts are presented. On both surfaces we find that methanol binds to the Al on-top site via its oxygen atom and with the C–O axis tilted away from the surface normal. Methoxy also shows a preference for Al-dominated sites. On NiAl(1 1 0), we predict that methoxy adsorbs with its oxygen atom in the Al–Al bridge site, while it is determined to be adsorbed with its oxygen atom in a 2Ni + Al hollow site on Ni₃Al(1 1 1), closer to Al than Ni. Surface and adsorbate induced binding energy shifts in the Al 2p states are calculated and found to be in good agreement with experimental high resolution photoelectron spectroscopy results.     

Nonlinear magnetoelastic effects in ultrathin epitaxial FCC Co(0 0 1) films:: an ab initio study

Those linear and nonlinear magnetoelastic coupling coefficients which determine the magnetostrictive stress and the strain-induced out-of-plane magnetic anisotropy in epitaxially grown FCC Co(0 0 1) films are calculated by the ab initio density functional electron theory. The nonlinear couplings have a strong effect on the change Δσ₁^m of the in-plane magnetostrictive stress resulting from a change of the magnetization direction from [0 1 0] to [1 0 0], but a negligibly small effect on the out-of-plane anisotropy e_MCA. The calculations confirm the experimental result that the measured out-of-plane anisotropy cannot be totally attributed to volume magnetoelastic effects. Estimates are given for the nonlinear magnetoelastic coupling coefficients m₁^γ,2 and m₂^γ,2.     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

Three-Ni-atom cluster formed by sulfur adsorption on Ni(1 1 1)

Sulfur adsorption on Ni(1 1 1) at room temperature has been studied by scanning tunneling microscopy. Irregularly-shaped islands, which are aggregates of small particles, appear with troughs on (1 1 1) terraces. Estimating the number of small particles in the irregular islands and that of Ni atoms ejected through the formation of troughs, we find that each small particle contains three Ni atoms. A three-Ni-atom cluster is proposed, where three S atoms are adsorbed on 4-fold hollow sites formed on the sides of the cluster. The Ni₃S₃ cluster can assume two orientations on the (1 1 1) surface. We show that the apparently-irregular distribution of small particles is well understood by assuming the alternate orientation of neighboring Ni₃S₃ clusters and the slight energy difference between the two orientations of a single Ni₃S₃ cluster. Real-time observation of a Ni(1 1 1) surface under H₂S ambience reveals that small islands composed of three or four Ni₃S₃ clusters change their positions rapidly, preventing the simple growth of islands at the initially-nucleated positions.     

Density-functional study of the CO adsorption on ferromagnetic Co(0 0 0 1) and Co(1 1 1) surfaces

The regular CO overlayers at coverage θ = 1/3 adsorbed on the (0 0 0 1) surface of hcp Co and (1 1 1) surface of fcc Co are studied by first-principles density-functional theory with the exchange-correlation component in the PBE form. Adsorption in atop, bridge, and three-fold hcp or fcc position are considered. The adsorption energies, CO stretching frequencies, geometry, work function, and local magnetic moments are studied, and, when possible, compared with experimental or theoretical data. Particularly, we show that the recently proposed correction to adsorption energy of CO prefers correctly the atop adsorption site, whereas the remaining sites are almost degenerate in energy. The CO molecule lowers magnetization on neighbouring Co atoms, and the effect decreases with the adsorption site coordination. We show, however, that this trend is not the result of the different C-Co separation at different adsorption sites. A very small magnetic moment appears on CO that couples antiferromagnetically to Co. Most results are very similar for the Co(0 0 0 1) and Co(1 1 1) surfaces.     

Density functional study of the adsorption of aspirin on the hydroxylated (0 0 1) -quartz surface

In this study the adsorption geometry of aspirin molecule on a hydroxylated (0 0 1) α-quartz surface has been investigated using DFT calculations. The optimized adsorption geometry indicates that both, adsorbed molecule and substrate are strongly deformed. Strong hydrogen bonding between aspirin and surface hydroxyls, leads to the breaking of the original hydroxyl–hydroxyl hydrogen bonds (Hydrogenbridges) on the surface. In this case new hydrogen bonds on the hydroxylated (0 0 1) α-quartz surface appear which significantly differ from those at the clean surface. The 1.11 eV adsorption energy reveals that the interaction of aspirin with α-quartz is an exothermic chemical interaction.     

Structure and magnetism of the V/Ta(0 0 1) surface: A DFT calculation

Calculations using the density functional theory, norm-conserving pseudopotentials and the generalized gradient approximation are performed for vanadium (V) and tantalum (Ta) clean surfaces, and the V/Ta(0 0 1) system. Vanadium and Ta(0 0 1) clean surfaces are found to be nonmagnetic with large inward relaxations of 9.81% and 11.19%, respectively, in good agreement with experiment and other calculations. However, we obtained an appreciable magnetic moment of 2.24 μB for the V monolayer in the V/Ta(0 0 1) system. The inward relaxation is reduced to 6.01% for the V overlayer on Ta(0 0 1) as a result of its spin polarization. An induced magnetic moment of 0.41 μB is obtained on the Ta interfacial layer, which is found to be anti-ferromagnetically coupled with the V overlayer and the Ta layers below.     

Coverage effects on phenol adsorption on Si(1 0 0)2 × 1 as: A first principle calculation

We investigated the adsorption of a 6-dimers Si(1 0 0)2 × 1 surface as a function of coverage and adsorption type (molecular/dissociative) by first principle calculations. In particular, we performed calculations on models with 2, 3, 4 and 6 phenol molecules, corresponding to coverage Θ = 0.34, 0.5, 0.67 and 1. We found that total adsorption energy, when at least one phenol is in a molecular state is lower than the sum of the corresponding singly adsorbed molecules. The dissociative adsorption of multiple molecules, both in parallel and switched configuration is most favoured for a coverage Θ = 0.34 (2.6 eV per adsorbed molecule). This values decreases to 2.0 eV and remains constant till the coverage 1 is reached.The energy barrier for the molecular-to-dissociated transition of a phenol molecule, in presence of another dissociatively adsorbed molecule is ∼0.008 eV and it is similar to the value in case of single adsorption. Possible hydrogen displacements were also considered.     

Density functional calculations for Ni adsorption on Al(1 1 0)

The adsorption of 0.25, 0.5 and 1 monolayer (ML) of the transition metal Ni on the metal substrate Al(1 1 0) was studied using first-principles calculations at the level of density functional theory. The metal–metal system was analyzed with the generalized gradient approximation. Four stable atomic configurations were considered, and the optimized geometries and adsorption energies of different Ni adsorption sites on the Al(1 1 0) surface at selected levels of coverage were calculated and compared. The four-fold hollow site was determined to be the most stable adsorption site with adsorption energy of 5.101 eV at 0.25 ML, 3.874 eV at 0.5 ML and 3.665 eV at 1 ML. The adsorption energies of the four sites slightly decreased as the Ni coverage increased. Work function analysis showed that when Ni is adsorbed on the Al(1 1 0) surface, the work function decreased as the coverage increased due to depolarization. The Mulliken population and density of states were calculated to determine the charge distribution of the adsorption site, confirming that a chemisorption interaction exists between the adsorbed Ni atom and Al(1 1 0) surface atoms.     

Entropy-driven adsorption of carbon nanotubes on (0 0 1) and (1 1 1) surfaces of CeO2 islands grown on sapphire substrate

According to the aim to compose combinatorial material by adsorption of carbon nanotubes onto the structured CeO₂ surface the interaction of the armchair (5,5) and zigzag (8,0) nanotubes with the (0 0 1) and (1 1 1) surfaces of CeO₂ islands have been investigated by theoretical methods. The thermodynamics of the adsorption were studied at the low surface coverage region. The interaction energy between the nanotube and the different CeO₂ surfaces shows significant increase when the size of the interface reaches 7–8 unit cells of CeO₂ and it remains unchanged in the larger interface region. However, the entropy term of the adsorption is significantly high when the distances of CeO₂ islands are equal to 27 nm (adsorption of armchair (5,5) nanotube) or 32 nm (adsorption of zigzag (8,0) nanotube). This property supports adsorption of nanotubes onto CeO₂ surfaces which possesses a very specific surface morphology. A long-wave vibration of nanotubes was identified as background of this unexpected phenomenon. This observation could be applicable in the development of such procedures where the nanotube adsorption parallel to the surface is aimed to perform.     

Adsorption of NO on Au atoms and dimers supported on MgO(1 0 0): DFT studies

The adsorption of NO on single gold atoms and Au₂ dimers deposited on regular O²⁻ sites and neutral oxygen vacancies (F_s sites) of the MgO(1 0 0) surface have been studied by means of DFT calculations. For Au₁/MgO the adsorption of NO is stronger when the Au atom is supported on an anionic site than when it is on a F_s site, with adsorption binding energies of 1.1 and 0.5 eV, respectively. In the first case the spin density is mainly concentrated on the metal atom and protruding from the surface. In such a way, an active site against radicals such as NO is generated. On the F_s site, the presence of the vacancy delocalizes the spin into the substrate, weakening its coupling with NO. For Au₂/MgO, as this system has a closed-shell configuration, the NO molecules bonds weakly with Au₂. Regarding the N–O stretching frequencies, a very strong shift of 340–400 cm⁻¹ to lower frequencies is observed for Au₁/MgO in comparison with free NO.     

Carbon-doped high-mobility hole gases on (0 0 1) and (1 1 0) GaAs

Since Stormer and Tsang have introduced the first two-dimensional hole gas (2DHG) in the GaAs/AlGaAs heterosystem, the choice of suitable dopants was limited to beryllium and silicon over the last 20 years. Both acceptor atoms have significant disadvantages, i.e. either high-diffusion rates or a limitation to specific growth directions. Utilizing a carbon filament-doping source, we prepared high-quality 2DHGs in the (0 0 1) and the nonpolar (1 1 0) crystal plane with carrier mobilies beyond 10⁶ cm²/Vs in quantum well and single interface structures. Low-temperature magnetoresistance measurements recover a large number of fractional QHE states and show a pronounced beating pattern from which the Rashba induced spin-splitting has been determined. In addition, 2DHGs have been grown on cleaved edges of (1 1 0) and (0 0 1) wafers with transport features in qualitative agreement to our findings on (1 1 0) substrates.