Magnetic surface plasmon-induced tunable photonic bandgaps in two-dimensional magnetic photonic crystals

We experimentally studied magnetically controllable photonic band gaps (PBGs) in two-dimensional magnetic photonic crystals consisting of ferrite rods. Besides the conventional PBG that relates to Bragg scattering, two other types of PBG, resulting from magnetic surface plasmon (MSP) resonance and spin-wave resonance, respectively, are observed. The PBG due to MSP resonance is particularly interesting because of its analogy to surface plasmon in metal; furthermore, it is shown to be completely tunable by an external static magnetic field from both an experimental and a theoretical point of view.     

外磁场与温度对低温超导光子晶体低频禁带特性的影响

文中用传输矩阵法(TMM)分析了TM波垂直入时,超导光子晶体的低频禁带特性,并讨论了外磁场与温度对禁带的影响.分析结果表明:超导光子晶体存在频率从0开始的低频禁带;当没有外磁场作用时,由于超导中正常态电子的影响,低频禁带的截止频率与温度无关;有外磁场作用时,温度才对截止频率具有可调性.外加恒定磁场时,低频禁带的截止频率随温度升高而减小;而在正常态电子的作用下,温度对处在超导态超导光子晶体禁带截止频率的调节范围相对忽略正常态电子情况下减小.恒温下,通过调节外磁场来控制带隙时,正常态电子的贡献很小可忽略不计;外磁场强度增大禁带截止频率减小.当超导体完全处于正常态时,低频禁带消失.     

Microwave photonic crystal multiplexer and its applications

The application of photonic band gap (PBG) structures to a microwave switch is studied. For this purpose, a frequency selective multiplexer is implemented combining one-dimensional PBG structures. The tunability of microwave photonic crystals (PCs) with ferrites and/or ferroelectric materials is then considered. A theoretical calculation performed on a two-dimensional hexagonal lattice of air rods embedded in a rectangular ferrite slab shows that the PBG is well tunable with external magnetic field parallel to the air rod. We have also discussed the implementation of microwave switch combining the tunability of PBG structures of ferrite and/or ferroelectric materials and the frequency selective nature of PBG multiplexer.     

低损宽频高双折射太赫兹光子带隙光纤

设计了一种低损耗、宽频段、高双折射太赫兹光子带隙光纤,呈三角晶格排列的亚波长空气孔包层实现了带隙的局域作用.利用全矢量有限元法对光纤的双折射及损耗特性进行了理论分析.结果表明,在大约0.3 THz的宽频范围内,类矩形纤芯太赫兹光子带隙光纤的损耗小于0.009 cm^-1,相双折射在10^-3数量级,群双折射可达10^-2数量级. 关键词： 太赫兹 太赫兹波导 光子晶体光纤 双折射     

Design of air-guiding honeycomb photonic bandgap fiber

We introduce a design procedure for hollow-core photonic bandgap (PBG) fiber with a cladding made of air-silica honeycomb photonic crystal (PC). It is found that air-guiding can be realized in both fundamental and secondary PBG regions of the cladding PC. Dispersion and radiation loss of the fundamental mode for two types of fiber structure are theoretically calculated. The fibers show promising waveguiding ability.     

空气环型二维光子晶体完全带隙特性研究

采用平面波展开法, 系统研究了空气环型二维光子晶体的完全光子带隙随结构参数变化而改变的规律, 并将其与普通的空气孔型和介质柱型二维光子晶体的完全带隙进行了比较. 研究表明: 空气环型二维光子晶体不仅可以获得更宽的完全带隙, 而且, 当介质折射率较低时, 其可以获得普通空气孔型和介质柱型二维光子晶体在低折射率条件下所无法获得的完全带隙. 关键词： 空气环型二维光子晶体 完全带隙 平面波展开法     

Complete photonic band gaps in one-dimensional ternary photonic crystals containing single negative materials

Complete photonic band gaps (PBGs) are found in one-dimensional ternary photonic crystals (1D TPCs) composed of an ordinary dielectric and single negative metamaterials. The proposed TPC gives omni directional PBG completely independent of polarizations dependent weekly on angle of incidence. Here the choice of different parameters of TPC is done in such a way so that it eliminates the Brewster's-angle transmission resonance, thus allowing a complete 3D PBG. It exhibits a photonic band or gap near frequencies where either the magnetic permeability or the electric permittivity of the metamaterial changes sign, whose width increases with the increasing angle of incidence. These result from the dispersive properties of the metamaterials and disappear for the particular case of propagation along the stratification direction. The results are discussed in terms of incident angle, layer thickness, dielectric constant of the dielectric material for TE and TM polarizations.     

基于横向磁光效应磁化等离子体光子晶体的光子带隙特性

通过外加与电磁波传播方向垂直的磁场来调控等离子体光子晶体的光子带隙结构。采用时域有限差分方法数值分析了由本征层为等离子体层和其他电介质材料层交替堆叠而成的磁化等离子体光子晶体的光子带隙结构和频谱特性。数值结果表明,光子晶体中等离子体的介电常数随着外磁场大小的变化而改变,从而使磁化等离子体光子晶体的带隙特性在一定的频率范围相应地得到调节。     

Bidirectional beam propagation method based on the method of lines for the analysis of photonic band gap structures

The bidirectional beam propagation method based on the method of lines is proposed as an innovative and efficient algorithm to investigate the optical properties of photonic band gap (PBG) structures. A few examples illustrate the application of this technique to the modeling of passive, lossy and active one-dimensional and index confined PBG structures. The algorithm results are validated by comparison with those obtained via the transfer matrix method, the mode-matching method and the finite difference time domain method. With respect to these methods, the present algorithm exhibits accurate results with reduced computer resources.     

The effect of etching interfacial layers on the absolute photonic band gap in two-dimensional photonic crystals

The photonic band structures of two-dimensional (2D) photonic crystals with etched interfacial layers between air rods and the background dielectric is studied theoretically. The effect of etching interfacial layers on absolute photonic band gap (PBG) is analyzed quantitatively. Numerical calculations are carried out based on Maxwell's equations and the plane-wave expansion method. It is shown that the physical property of interfacial layers influence the absolute PBG, and the existence of interfacial layers cannot enlarge the largest absolute PBG of an ideal case without interfacial layers.     

Impact of geometry on the TM photonic band gaps of photonic crystals and quasicrystals

Here we demonstrate a novel quantitative procedure to pursue statistical studies on the geometric properties of photonic crystals and photonic quasicrystals (PQCs) which consist of separate dielectric particles. The geometric properties are quantified and correlated to the size of the photonic band gap (PBG) for wide permittivity range using three characteristic parameters: shape anisotropy, size distribution, and feature-feature distribution. Our concept brings statistical analysis to the photonic crystal research and offers the possibility to predict the PBG from a morphological analysis.     

基于法拉第效应磁化等离子体光子晶体FDTD分析

通过增加外磁场来调控等离子体光子晶体的光子带隙结构,采用时域有限差分算法分析了由本征层为磁化等离子体层和其他电介质材料层交替堆叠而成的磁化等离子体光子晶体的光子带隙结构,数值模拟中采用完全匹配层吸收边界条件以防止边界的反射。由于外磁场的法拉第磁光效应,使等离子体的介电常数随着外磁场的变化而改变。数值结果表明,等离子体光子晶体的带隙特性在一定的频率范围相应地得到调节,实现了频率低于等离子体频率的电磁波也能在等离子体中传播。     

Photonic amorphous diamond structure with a 3D photonic band gap

We report that a full three-dimensional (3D) photonic band gap (PBG) is formed in a photonic amorphous structure in spite of complete lack of lattice periodicity. It is numerically shown that the structure "photonic amorphous diamond" possesses a sizable 3D PBG (18% of the center frequency for Si-air dielectric contrast) and that it can confine light at a defect as strongly as conventional photonic crystals can. These findings present important new insight into the origin of 3D PBG formation and open new possibilities in developing 3D PBG materials.     

Theoretical study on photonic devices based on a commensurate two-pattern photonic crystal

In two-dimensional optical chip applications, the optical wave is classified to two modes according to its polarization: TE and TM. It is desirable to integrate multiple optical wave control devices for different polarizations onto the same plane at the scale of the wavelength. Here we demonstrate a periodic two-pattern photonic crystal with a large, complete photonic bandgap (PBG). It comes from the superposition of two substructures: one contributes the TM PBG and the other contributes the TE PBG. By purposely introducing defects into the substructures, photonic devices for different polarizations can be integrated to bend, split, and resonate TM/TE waves simultaneously on the same plane.     

���ڷ�����ЧӦ�Ż�����������Ӿ���FDTD����

通过增加外磁场来调控等离子体光子晶体的光子带隙结构,采用时域有限差分算法分析了由本征层为磁化等离子体层和其他电介质材料层交替堆叠而成的磁化等离子体光子晶体的光子带隙结构,数值模拟中采用完全匹配层吸收边界条件以防止边界的反射。由于外磁场的法拉第磁光效应,使等离子体的介电常数随着外磁场的变化而改变。数值结果表明,等离子体光子晶体的带隙特性在一定的频率范围相应地得到调节,实现了频率低于等离子体频率的电磁波也能在等离子体中传播。     

二维单斜点阵光子晶体的第一布里渊区及带隙计算

二维单斜点阵光子晶体在光学聚焦器件及光子晶体波导中有重要的应用价值，详细讨论了二维单斜点阵光子晶体的第一布里渊区及带隙计算，并与常规方法计算得出的二维正三角形晶格光子晶体的带隙结构进行了比较.最后讨论了临界条件下二维单斜点阵光子晶体的带隙结构，证明了本方法的有效性.     

二维正方格子磁性光子晶体的带隙结构

采用平面波展开的方法计算了正方格子二维磁性光子晶体(MPC)的光子带隙结构.散射子的形状分别为：长方形，正方形，六角形和圆形.通过调节磁导率，填充率和散射子的旋转角度，找到了MPC各种结构的最大的绝对带隙宽高比ω_R.研究发现：随着磁导率的增加，MPC绝对带隙中心频率ω_g单调减小，绝对带隙宽度Δω和其宽高比ω_R可能不同时达到最大值.而随着填充率或者散射子旋转角的增加，基本不改变ω_g的大小，各种结构的Δω和ω_R同时达到最大值. 关键词： 磁性光子晶体 光子带隙结构     

Band gap structure of disordered chiral photonic crystals

Based on the non-symmetric transmission-line method, the band gap structure of disordered chiral photonic crystals (CPC) has been investigated. The influence of the chiral parameters, the disorder, the periods and the refractive index on the band gap structure has been discussed. It is found that the photonic band gap (PBG) in CPC is more obvious than that in the conventional photonic crystals, and the PBG can be increased by increasing the periods or the contrast of the refractive index of the two media. It is also found that the existence of disorder will influence the band edge of the PBG, and such influence will increase with the increment of periods or the contrast of the refractive index of the two media.     

光子晶体压力传感器的基本原理

通过研究一维光子晶体受压力后其光带隙性能的变化，提出了光子晶体压力传感器的原理.计算表明，压力的大小与禁带起始波长、截止波长和禁带宽之间呈简单的线性对应关系.这就提供了通过测量光带隙性能而感知外载荷或者通过施加载荷而调制光带隙性能的可能.由于光子晶体的结构周期和光波波长为一个数量级，也就有可能制造出一系列精巧的压力、温度传感器或者其他精密仪器. 关键词： 压力传感器 光子晶体 光带隙性能     

Absolute photonic band gaps of two-dimensional square-lattice photonic crystals with Taiji-shaped dielectric rods

A novel structure of two-dimensional (2D) square-lattice photonic crystal (SLPC) composed of Taiji-shaped dielectric rods imbedded in air is constructed and the properties of absolute photonic band gap (PBG) are theoretically analyzed in both the number and width by Plane Wave Expansion Method (PWM). By comparing the absolute PBGs in 2D SLPCs consisting of four shapes of rods with different symmetries (circle, button, semicircle and Taiji) at the same filling ratio, we find that both the number and width of absolute PBG significantly increase with the breaking of scatterer's symmetry, and the Taiji-shaped rods with the poorest symmetry can attain both the most number and the largest width of absolute PBGs. Additionally, we also study the influence of dielectric constant ε and three geometric parameters of Taiji-shaped scatterer on the absolute PBG and discover that the SLPC with Taiji-shaped rods can generate at most nine absolute PBGs and the largest absolute PBG with the width 0.0485 (ωa/2πc).