Bonding of gold nanoclusters to oxygen vacancies on rutile TiO2(110)

Through an interplay between scanning tunneling microscopy (STM) and density functional theory (DFT) calculations, we show that bridging oxygen vacancies are the active nucleation sites for Au clusters on the rutile TiO2(110) surface. We find that a direct correlation exists between a decrease in density of vacancies and the amount of Au deposited. From the DFT calculations we find that the oxygen vacancy is indeed the strongest Au binding site. We show both experimentally and theoretically that a single oxygen vacancy can bind 3 Au atoms on average. In view of the presented results, a new growth model for the TiO2(110) system involving vacancy-cluster complex diffusion is presented.     

Molecular chemisorption as the theoretically preferred pathway for water adsorption on ideal rutile TiO2(110)

By taking careful account of slab thickness and adsorbate orientation effects we present, for the first time, periodic density functional calculations predicting the preference of water to adsorb in a molecular state on the ideal rutile TiO2(110) surface at all coverages < or =1 monolayer (ML). Moreover, while this has been predicted previously for 1/4 ML coverage [Phys. Rev. Lett. 87, 266104 (2001)]], we show that the assertion made in that work, that dissociation is energetically unfeasible on the ideal surface, is incorrect. Our results thus resolve a long-standing discrepancy between theory and experiment and significantly improve the understanding of water chemistry on TiO2 surfaces.     

Adsorption of L-cysteine on rutile TiO2(110)

We have used X-ray photoelectron spectroscopy to study the adsorption of L-cysteine on a rutile TiO₂(110) surface at room temperature and ? 65 °C. For the molecules in direct contact with the surface our results suggest that the molecules bind dissociatively to the fivefold-coordinated Ti atoms of the surface through their deprotonated carboxylic groups. A second, dissociative interaction occurs between the molecular thiol groups and the surface. It is attributed to a dissociative bond to the bridging oxygen vacancies. Most likely, the thiol groups are deprotonated and a bond is formed between the thiolates and defects. In an alternative scenario, the C–S bond is cleaved and atomic sulfur binds to the defects. With regard to the molecular amino groups, they remain neutral at the lowest investigated coverages (0.3–0.5 ML), but already starting from around 0.7 ML nominal coverage protons are being transferred to them. The fraction of protonated amino groups increases with coverage and becomes dominating in multilayers prepared at room temperature and ? 65 °C. In these multilayers the carboxylic groups are deprotonated.     

Tetraoxygen on reduced TiO2(110): oxygen adsorption and reactions with bridging oxygen vacancies

Oxygen adsorption on reduced TiO2(110) is investigated using temperature programmed desorption and electron-stimulated desorption. At low temperatures, 2 O(2) molecules can be chemisorbed in each oxygen vacancy. These molecules do not desorb upon annealing to 700 K. Instead, for 200 K相似文献   

Interplay between external strain and oxygen vacancies on a rutile TiO2(110) Surface

Comprehensive first-principle calculations on strained rutile TiO2(110) indicate that the formation energy of different types of oxygen vacancies depends on the external strain. For the unstrained state, the energetically favorable oxygen vacancy (EFOV) appears on the bridging site of the first layer; when 3% tensile strain along [11[over ]0] is applied, EFOV moves to the in-plane site, while 2% compressive strain along either [001] or [11[over ]0] shifts EFOV to the subbridging site. We therefore suggest that the distribution of oxygen vacancies can be engineered by external strain, which may help to improve the applications of a TiO2 surface where oxygen vacancy plays an important role.     

Methylene bromide chemistry and photochemistry on rutile TiO2(110)

The chemistry and photochemistry of methylene bromide (CD₂Br₂) on the rutile TiO₂(110) surface was probed using temperature programmed desorption (TPD). CD₂Br₂ desorbed in three desorption states at 145, 160 and 250 K tentatively assigned to desorption from the multilayer, from an η¹-CD₂Br₂ species and a bridging η²-CD₂Br₂ species, respectively. The latter two TPD states presumably involve binding of CD₂Br₂ molecules to the surface through Br coordination at five-coordinate Ti⁴⁺ surface sites. The 160 and 250 K TPD states saturated at coverages of 1.0 and 0.33 ML, respectively, where 1 ML is equivalent to the surface Ti⁴⁺ site density (5.2 × 10¹⁴ cm^? 2). No thermal decomposition of CD₂Br₂ was observed on either the clean surface or with preadsorbed O₂. UV irradiation of CD₂Br₂ on TiO₂(110) resulted in predominately photodesorption, with trace amounts of photodecomposition evidenced in TPD. The rate of CD₂Br₂ photodesorption from TiO₂(110) occurred with a low cross section (~ 2 × 10^? 21 cm²) similar to that expected from direct optical excitation of CD₂Br₂. This observation suggests that charge carriers generated in TiO₂(110) were no more effective in activating adsorbed CD₂Br₂ molecules than would be expected through direct molecular excitation. These findings suggest that photocatalytic destruction of halocarbons such as CD₂Br₂ on TiO₂ may preferentially occur though indirect processes (such as OH radical attack) as opposed to direct electron transfer processes involving charge carriers generated in TiO₂ by bandgap excitation.     

Direct evidence for ethanol dissociation on rutile TiO2(110)

We have studied the interaction of ethanol with reduced TiO(2)(110)-(1 × 1) by high-resolution scanning tunneling microscopy (STM) measurements and density functional theory calculations. The STM data revealed direct evidence for the coexistence of molecularly and dissociatively adsorbed ethanol species on surface Ti sites. In addition, we found evidence for dissociation of ethanol at bridge-bonded O vacancies. The density functional theory calculations support these findings and rationalize the distinct diffusion behaviors of molecularly and dissociatively adsorbed ethanol species, as revealed in time-lapsed STM images.     

Stability of gold nanostructures on rutile TiO2(110) surface

The adsorption of gold atoms and formation of nanostructures on the rutile TiO₂(110) surface with different degree of oxygen reduction was studied from first principles. The Au atoms adsorb strongest at oxygen vacancy sites. Starting from a very low coverage limit the potential energy profiles or diffusion paths of the adsorbed Au monomers and dimers were calculated. Stable structures of two to nine Au atoms arranged in finite and infinite rows and in the shape of finite-size clusters were determined. All these structures are found to bind to the reduced surface stronger than 2 eV/atom. The elongated Au row-like structures bind by about 0.1 eV stronger than 3D clusters, suggesting a preference for the 1D-like Au growth mode on the missing-row reconstructed TiO₂(110).     

Vacancy-assisted diffusion of alkoxy species on rutile TiO2(110)

Using scanning tunneling microscopy (STM) and density functional theory simulations, we have studied the diffusion of alkoxy species formed by the dissociation of alcohols on bridge-bonded oxygen (BBO) vacancies (BBO(V)'s) on TiO2(110). At elevated temperatures (>or=400 K) the sequential isothermal STM images show that mobile BBO(V)'s mediate the diffusion of alkoxy species by providing space for alkyl-group-bearing BBO atom to diffuse into. The experimental findings are further supported by simulations that find that BBO(V) diffusion is the rate limiting step in the overall diffusion mechanism.     

TiO2纳米层(110)表面对DNA强吸附的第一性原理研究

纳米二氧化钛(TiO₂)由于具有卓越的生物相容性和优异的物理性能,因此有望在生物医学领域中发挥重要的作用,且应用前景广阔.利用第一性原理计算,深入地研究了金红石型TiO₂纳米层(110)表面与脱氧核糖核酸(DNA)不同碱基在界面之间的吸附性能及相互作用的原子机制.通过分析结合能和功函数的计算结果发现,TiO₂纳米层(110)表面对DNA碱基的吸附强度显著增强,比典型二维纳米材料的吸附强度大两倍以上.进而,通过研究电子能带结构和态密度计算结果,阐明了二者在界面之间的吸附机制,其起源于吸附体系显著降低的能级和C、N和/或O的2p轨道与费米能级附近Ti原子的3d轨道的强烈杂化.纳米TiO₂为DNA传感器和测序仪的设计提供了一种极具潜力的候选材料.     

Pyrocatechol as a surface capping molecule on rutile TiO2 (110)

A ‘cap and dip’ method of adsorbing ruthenium di-2,2′-bipyridyl-4,4′-dicarboxylic acid diisocyanate (N3 dye) on a rutile TiO₂ (110) surface was investigated using pyrocatechol as a capping molecule. This method involves cleaning the rutile surface in ultra-high vacuum (UHV), depositing pyrocatechol onto the surface to ‘cap’ the adsorption sites, removing from vacuum, ‘dipping’ in an N3 dye solution and returning to vacuum. Photoemission measurements following the return of the crystal to vacuum suggest that the pyrocatechol keeps the surface free from contamination on exposure to atmosphere. Photoemission spectra also indicate that the pyrocatechol capping molecules are replaced by the N3 dye in solution and that the N3 dye is adsorbed intact on the rutile TiO₂ (110) surface. This technique may allow other large molecules, which are thermally unstable to evaporation in UHV, to be easily deposited onto TiO₂ surfaces.     

金红石型TiO2(110)表面性质及STM形貌模拟

采用密度泛函理论从头计算了金红石型TiO2(110)表面的相关性质,切片模型含有9层原子,采用化学整比表面结构,晶胞真空层厚度为1.5nm,原子价电子采用超软赝势表达.差分电子密度分布图发现原子附近区域电子密度分布以球对称为主,电子定域形成离子键的趋势较强,但在Ti和O原子之间存在较弱的共价键.模拟了金红石型TiO2(110)表面结构的扫描隧道显微镜(scanning tunneling microscope,简称STM)图像,利用Tersoff-Hamann的成像理论,在 2 V的正向偏压下,采用一系列变化的数值作为STM探针离表面桥式氧的距离,分析了相关态密度的变化,发现(110)表面的STM形貌凸起部分来自于5-Ti原子,而不是2-O原子(桥式氧),在TiO2(110)表面结构成像中,电子效应起主导作用,证实了STM实验观察到的亮行是Ti原子的结果.     

Oxygen chemisorption on Cr(110): II. Evidence for molecular O2(ads)

Oxygen chemisorption and dissociation on Cr(110) at 120 K have been studied using high resolution electron energy loss spectroscopy (HREELS), electron stimulated desorption ion angular distribution (ESDIAD), low energy electron diffraction (LEED) and Auger electron spectroscopy (AES). Dissociative adsorption dominates although vibrational and stimulated desorption data provide evidence for a coexisting minority molecular binding state. An O₂(ads) vibrational frequency of 1020 cm⁻¹ and a six beam ESDIAD pattern are suggestive of super-oxo O₂(ads) bonding at six local sites each with the O-O molecular axis tilted away from the surface normal. These results are compared with data for chemisorbed oxygen on other transition metal surfaces.     

First-principles molecular dynamics simulations of uranyl ion interaction at the water/rutile TiO2(110) interface

The effects of temperature and solvation on uranyl ion adsorption at the water/rutile TiO₂(110) interface are investigated by Density Functional Theory (DFT) in both static and Born–Oppenheimer molecular dynamics approaches. According to experimental observations, uranyl ion can form two surface complexes in a pH range from 1.5 to 4.5. Based on these observations, the structures of the complexes at 293 K are first calculated in agreement with vacuum static calculations. Then, an increase in temperature (293 to 425 K) induces the reinforcement of uranyl ion adsorption due to the release of water molecules from the solvation shell of uranyl ion. Finally, temperature can modify the nature of the surface species.