应用海藻酸钠脱除重金属研究进展

重金属污染已成为全球性的环境问题,脱除重金属是治理重金属污染的主要途径。海藻酸钠(SA)本身无毒、性质稳定、价格低廉,具有较强的胶凝性、成膜性和络合能力,既可作为脱除重金属的吸附材料,又可作为脱除重金属的固定化载体,在重金属脱除中具有广泛的应用。本文重点综述了SA凝胶球、SA复合膜、SA纳米复合材料、SA分子印迹聚合物脱除重金属,以及SA作为单一固定化载体和复合固定化载体脱除重金属的研究进展。展望了SA脱除重金属的应用前景。     

碳纳米管固定化酶

在固定化酶技术中,载体材料的选择至关重要,碳纳米管作为一种新型高效的酶固定化载体,具有较大的比表面积、有序的纳米孔道结构、良好的力学/电学/热学性能、突出的化学稳定性、生物相容性和可控的表面官能化修饰等优良特性,应用日益广泛。本文重点介绍了水解酶、氧化还原酶等具有重要工业应用价值的酶在碳纳米管上的固定化研究现状,探讨了载体的表面修饰和固定化方式对固定化酶的酶学性质的影响,并对碳纳米管固定化酶的发展前景进行了展望。     

石墨烯固定化酶研究进展

固定化酶具有高效催化、可重复利用及易分离等优点,在食品、医药等工业生产领域及微观生化检测领域具有广泛应用。固定化酶的性能与载体材料关系密切。石墨烯作为一种广受关注的纳米材料,其独特而优良的物化性能是固定酶的理想载体。本文主要介绍了近年来以石墨烯及其衍生物为载体的固定化酶技术的发展状况。重点对以物理吸附法、化学键合法和包埋法为主的各种石墨烯固定化酶的制作方法,以及其在酶微反应器和生物传感等领域的最新应用进行详细的评述,并对其今后的发展前景进行了展望。     

GOx@GA@MIL-101金属有机骨架用于葡萄糖的快速比色识别

金属有机骨架(MOFs)材料具有均匀的孔隙率和大的比表面积,可作为固定化酶的载体。然而,固定化酶由于较长响应时间或酶易泄漏的缺点阻碍了其应用。本研究选取类过氧化物酶MIL-101为载体,戊二醛(GA)为交联剂,通过交联法将葡萄糖氧化酶(GOx)固定在载体上,建立了模拟多酶体系GOx@GA@MIL-101。制备的复合物可进一步高效催化级联反应检测葡萄糖。GOx@GA@MIL-101具有更快的催化变色效果(30 s)。     

GOx@GA@MIL-101金属有机骨架用于葡萄糖的快速比色识别

金属有机骨架(MOFs)材料具有均匀的孔隙率和大的比表面积,可作为固定化酶的载体。然而,固定化酶由于较长响应时间或酶易泄漏的缺点阻碍了其应用。本研究选取类过氧化物酶 MIL-101为载体,戊二醛(GA)为交联剂,通过交联法将葡萄糖氧化酶(GOx)固定在载体上,建立了模拟多酶体系GOx@GA@MIL-101。制备的复合物可进一步高效催化级联反应检测葡萄糖。GOx@GA@MIL-101具有更快的催化变色效果(30 s)。     

共价有机框架材料固定化酶的研究进展

共价有机框架（Covalent Organic Frameworks, COFs）是一种新型的多孔材料,具有结构规整、骨架稳定、孔径结构可调等特点,被视为固定化酶的理想载体。我们主要总结了近10年来COFs材料作为载体,通过物理吸附、共价连接、包埋的固定化策略制备固定化酶的研究进展与应用,并讨论了COFs材料在酶固定化领域所面临的机遇和挑战。     

氨化大孔球状聚氯乙烯固定化木瓜蛋白酶的研究

以氨化大孔球状聚氯乙烯为载体,采用戊二醛载体交联的方法,将木瓜蛋白酶进行了固定化。以酪蛋白为底物,测定了固定化酶的活力回收。研究了固定化条件对固定化酶活力回收的影响。同时,对所得固定化酶的性质,如温度-活力关系、pH-活力关系、热稳定性以及重复使用性进行了考察。结果表明,所得固定化木瓜蛋白酶具有较好的稳定性和重复使用性。     

纳米载体固定化酶的最新研究进展

催化剂是化学工业的重要基础,其中酶是重要的高效天然催化剂。近年来,酶被越来越多地应用于工业领域,如精细化工、食品工业、制药工业、纺织业和制浆造纸。然而,由于游离酶存在价格昂贵及操作稳定性(特别是回收与重复使用性能)低等缺点,其在工业上的进一步应用受到一定限制。对酶进行固定化是解决上述问题的有效途径。一个理想的酶固定化技术需要载体具有良好的生物相容性和高比表面积,能够负载适量的酶并且具有很好的重复使用性能,固定化酶的过程简单温和,所得到的固定化酶制剂具有良好的催化性能、稳定性以及工业应用价值。尽管固定化酶技术经过了多年的发展,但仍需进一步研究。近几年,人们研究了基于纤维素纳米晶类、聚多巴胺类纳米载体以及生物相容性合成有机物纳米胶等新型载体对酶的固定化,取得了较好的成果。本文综述了这些新型纳米载体的制备以及酶的固定化过程,阐述了纳米载体固定化酶的结构和催化性能,并展望了发展前景。纤维素是全球产量最高、来源最广的生物聚合物。纤维素经过一定的酸(常用硫酸和盐酸)水解处理后,剩下的是具有高结晶度的纤维素纳米晶。它具有高比表面积、高机械强度和高长径比等优异性能。因此,研究者利用纤维素纳米晶作为载体进行酶固定化,获得了高负载量、高催化性能的固定化酶制剂。基于仿生矿化法制备的聚多巴胺类材料近年来获得研究者越来越多的关注。多巴胺具有良好的自聚合能力,可以对无机、有机等各种材料进行表面修饰。同时,聚多巴胺中含有的活性官能团可以与酶发生交联,从而达到固定化酶的效果。基于合成性聚合物纳米胶载体的固定化酶技术同样是一个新兴的、有意义的研究领域。相关的固定化过程可分为两大类：(1)在酶分子表面通过原位聚合生成纳米胶(growing-from过程);(2)将酶与预先合成的纳米胶进行交联(grafting-to过程)。其中, growing-from过程是先将酶分子丙烯酰化,再进行原位聚合。而原位聚合又可分为自由基聚合、原子转移自由基聚合(ATRP)和可逆加成-断裂链转移聚合(RAFT)。其中, ATRP和 RAFT主要用于制备环境响应型的酶-聚合物纳米凝胶。     

以HPD-750大孔树脂为载体材料固定化果胶酶

HPD-750树脂是中极性大孔吸附树脂,生物相容性好,机械性能稳定,具有较大的比表面积,可用于固定化酶载体材料。本文以HPD-750大孔树脂为载体固定化果胶酶,研究各因素对固定化酶的影响,并采用正交试验对固定化条件进行优化。结果表明,当pH为4.0、固定化温度为45℃、固定化时间为4h、加酶量为0.16g/mL时,固定化酶活力可达5146U/mg。以HPD-750大孔树脂为载体材料制备的固定化酶相较于游离酶具有更好的酸碱稳定性和热稳定性。在循环使用10次后,酶活力依然保留80%以上;4℃储藏25d之后,其酶活力仍保留60%以上。与D311大孔树脂、聚丙烯酰胺和海藻酸钠微球制备的固定化酶相比,HPD-750大孔树脂固定化酶的活性、操作稳定性、机械稳定性和储存稳定性都较好。该结果说明,HPD-750大孔树脂可作为固定化酶较好的载体材料。     

新型疏水性酶载体的合成及其性能研究

研究了聚丙烯酸酯类疏水性固定化酶载体(包括环氧基和胺基)的合成,旨在提高载体固载酶的性能。结果表明,所得载体的孔结构适合固定化青霉素酰化酶、D-氨基酸氧化酶、DL-7-ACA酰化酶、头孢菌素C酰化酶等。固定化D-氨基酸氧化酶的酶活与载体的含水量(与其孔结构相关)有密切的关系;载体的突出优点是固载酶时,酶的固定化效率可高达50%。     

Dynamic Adsorption and Desorption Behaviors of Cu(II), Ag(I), and Au(III) on Silica Gel Microspheres Encapsulated by Salicylic Acid–Functionalized Polystyrene

Composite material silica gel microspheres encapsulated by salicylic acid functionalized polystyrene(SG–PS–azo–SA) have been synthesized, and the dynamic adsorption and desorption properties of this silica gel matrix inorganic–organic composite material for Cu(II), Ag(I), and Au(III) have been investigated. The results displayed that SG–PS–azo–SA had excellent adsorption for Cu(II), and the film diffusion dominated the adsorption process of SG–PS–azo–SA for Cu(II), Ag(I), and Au(III). These metal ions could be desorbed with the eluent solution of 2.5 mol/L HCl, 3% thiourea in 0.5 mol/L HCl, and 0.5% thiourea in 1 mol/L HCl, respectively. When the elution was carried out for 30 min, 30 min, and 132 min, the desorption ratio ω could reach 91.1%, 99.4%, and 60.84%, respectively. Thus, silica gel encapsulated by polystyrene coupled with salicylic acid (SG–PS–azo–SA) is favorable and useful for the removal of metal ions Cu(II), Ag(I), and Au(III), and the high adsorption capacity make it a promising candidate material for the metal ions removal.     

Remove of Heavy Metals(Cu2+, Pb2+, Zn2+ and Cd2+) in Water Through Modified Diatomite

At present, heavy metal pollution has become a major environmental problem, influencing the survival of human and other creatures. Developing heavy metal ion adsorbents, which are environment friendly, of low cost and good performance is one of the effective means to solve heavy metal pollution. Rich low-grade diatomite mineral, as raw material, was modified with calcium carbonate to improve the adsorption properties of diatomite for heavy metal ions. The effects of dosage(m), pH, adsorbing time(t), temperature(T) and concentration of adsorbent(c) on the removal rate of heavy metal ions(Cu²⁺, Pb²⁺, Zn²⁺ and Cd²⁺) were studied. The results show that under the suitable conditions, T=15 ℃, c=1.5 mmol/L, m=10 g/L, t=60 min, in a weak acid environment, the removal effect of the four kinds of metal ions by modified diatomite is the best.     

A stannum-bismuth composite film electrode for simultaneous determination of zinc(II) and cadmium(II) using differential pulse anodic stripping voltammetry

The development and use of 'green' electrode materials is extremely attractive for the routine use of disposable metal sensors. Bismuth is an environmentally-friendly element and a bismuth film electrode was proposed as an alternative to mercury film electrodes. Compared with bismuth, stannum is a more 'environmentally friendly' material. The stannum-bismuth composite film electrode prepared by the in situ electrodeposition of stannum and bismuth on the glassy carbon substrate is reported for the first time. Compared with bismuth film and stannum film electrodes, the stannum-bismuth composite film electrode revealed better electroanalytical performance, and can be used as a possible alternative electrode for electrochemical stripping analysis of trace heavy metals.     

Dye-ligand immobilized IPNs membrane for removal heavy metal ions

We have developed a novel approach to obtain high metal sorption capacity utilizing a membrane containing chitosan and an immobilized reactive dye (i.e. Reactive Yellow-2). The composite membrane was characterized by SEM, FT-IR, swelling test, and elemental analysis. The membrane has uniform small pores distribution and the pore dimensions are between 5 and 10 μm, and the HEMA:chitosan ratio was 50:1. The reactive dye immobilized composite membrane was used in the removal of heavy metal ions [i.e., Pb(II), Hg(II) and Cd(II)] from aqueous medium containing different amounts of these ions (5-600 mg l⁻¹) and at different pH values (2.0-7.0). The maximum adsorption capacities of heavy metal ions onto the composite membrane under non-competitive conditions were 64.3 mmol m⁻² for Pb(II), 52.7 mmol m⁻² for Hg(II), 39.6 mmol m⁻² for Cd(II) and the affinity order was Pb(II) > Hg(II)>Cd(II).     

金属有机框架材料对Cr(Ⅵ)离子的吸附去除研究进展

重金属离子污染问题一直备受关注.开发利用多孔材料吸附去除水中重金属离子一直是材料、环境等相关学科领域的研究热点之一.金属有机框架材料(metal-organic frameworks,MOFs)是一类新型的多孔材料,具有结构多样、比表面积大、孔径可调、孔表面特征易设计调控等特点,在气体分离、催化、传感等领域表现出极大的...     

Graphene Oxides Prepared by Hummers’, Hofmann’s,and Staudenmaier’s Methods: Dramatic Influences on Heavy‐Metal‐Ion Adsorption

Graphene oxide (GO), an up‐and‐coming material rich in oxygenated groups, shows much promise in pollution management. GO is synthesised using several synthetic routes, and the adsorption behaviour of GO is investigated to establish its ability to remove the heavy‐metal pollutants of lead and cadmium ions. The GO is synthesised by Hummers’ (HU), Hofmann’s (HO) and Staudenmaier’s (ST) methodologies. Characterisation of GO is performed before and after adsorption experiments to investigate the structure–function relationship by using Fourier‐transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Scanning electron microscopy coupled with elemental detection spectroscopy is used to investigate morphological changes and heavy‐metal content in the adsorbed GO. The filtrate, collected after adsorption, is analysed by inductively coupled plasma mass spectrometry, through which the efficiency and adsorption capacity of each GO for heavy‐metal‐ion removal is obtained. Spectroscopic analysis and characterisation reveal that the three types of GO have different compositions of oxygenated carbon functionalities. The trend in the affinity towards both Pb^II and Cd^II is HU GO>HO GO>ST GO. A direct correlation between the number of carboxyl groups present and the amount of heavy‐metal ions adsorbed is established. The highest efficiency and highest adsorption capacity of heavy‐metal ions is achieved with HU, in which the relative abundance of carboxyl groups is highest. The embedded systematic study reveals that carboxyl groups are the principal functionality responsible for heavy‐metal‐ion removal in GO. The choice of synthesis methodology for GO has a profound influence on heavy‐metal‐ion adsorption. A further enrichment of the carboxyl groups in GO will serve to enhance the role of GO as an adsorbent for environmental clean‐up.     

Removal of Multiple Contaminants from Water by Polyoxometalate Supported Ionic Liquid Phases (POM‐SILPs)

The simultaneous removal of organic, inorganic, and microbial contaminants from water by one material offers significant advantages when fast, facile, and robust water purification is required. Herein, we present a supported ionic liquid phase (SILP) composite where each component targets a specific type of water contaminant: a polyoxometalate‐ionic liquid (POM‐IL) is immobilized on porous silica, giving the heterogeneous SILP. The water‐insoluble POM‐IL is composed of antimicrobial alkylammonium cations and lacunary polyoxometalate anions with heavy‐metal binding sites. The lipophilicity of the POM‐IL enables adsorption of organic contaminants. The silica support can bind radionuclides. Using the POM‐SILP in filtration columns enables one‐step multi‐contaminant water purification. The results show how multi‐functional POM‐SILPs can be designed for advanced purification applications.     

Polysaccharide-Based Composite Hydrogels as Sustainable Materials for Removal of Pollutants from Wastewater

Nowadays, pollution has become the main bottleneck towards sustainable technological development due to its detrimental implications in human and ecosystem health. Removal of pollutants from the surrounding environment is a hot research area worldwide; diverse technologies and materials are being continuously developed. To this end, bio-based composite hydrogels as sorbents have received extensive attention in recent years because of advantages such as high adsorptive capacity, controllable mechanical properties, cost effectiveness, and potential for upscaling in continuous flow installations. In this review, we aim to provide an up-to-date analysis of the literature on recent accomplishments in the design of polysaccharide-based composite hydrogels for removal of heavy metal ions, dyes, and oxyanions from wastewater. The correlation between the constituent polysaccharides (chitosan, cellulose, alginate, starch, pectin, pullulan, xanthan, salecan, etc.), engineered composition (presence of other organic and/or inorganic components), and sorption conditions on the removal performance of addressed pollutants will be carefully scrutinized. Particular attention will be paid to the sustainability aspects in the selected studies, particularly to composite selectivity and reusability, as well as to their use in fixed-bed columns and real wastewater applications.     

高铁酸盐:一种绿色的多功能水处理剂

多种新型污染物和微生物污染等问题的出现,导致地表水水质复杂多变,传统的水处理药剂和处理方式已无法满足人们对饮用水处理的需求。 高铁酸盐作为一种新型水处理试剂,同时具备优良的氧化性和混凝性,而且不会引起二次污染,是一种可大力开发的绿色试剂。 本文综述了高铁酸盐净水剂的制备与表征分析方法,及其用于水处理对重金属、新型污染物和微生物等去除的作用机制。 目前,有关高铁酸盐用于有机污染物去除的混凝和氧化去除协同作用的研究尚不多见,高铁酸盐的氧化-混凝协同特性尚未被充分开发。 本文以此为重点进行了讨论,并对高铁酸盐净水剂的应用进行了展望。     

金属有机骨架材料MIL-101及其改性材料去除环境污染物的研究进展

目前我国水环境以及空气面临着严峻的污染形势,许多危害人身体健康的污染物亟待治理。 金属有机骨架作为目前新兴的多孔材料,具有高孔隙率、高比表面积、结构可调性以及不饱和金属位点等特点。 这使得金属有机骨架材料具有一定的环境污染物去除能力。 围绕对苯二甲酸铬金属有机骨架材料(MIL-101)及其功能化修饰的改性材料的结构信息展开,总结了材料的主要合成方法,对功能化修饰的方法和原理进行分析,重点分析了这种材料在环境污染物去除等方面的应用研究进展,包括它在重金属离子、农药、抗生素、有机染料、碘离子等污染物的吸附处理领域的应用, 以及在污染物的监测和环境风险预警方面的应用潜力。 指出了材料在制备成本、反复利用次数、污染物后续处理等方面仍然存在的问题。