木质素酚类单体化合物制备烷烃燃料

通过引入中间小分子化合物,采用傅克烷基化反应,实现了从木质素酚类单体化合物制备长链烷烃燃料.考察了催化剂、醛酮类小分子化合物、反应时间、反应温度、物料比、底物等条件对从木质素酚类单体制备二聚体反应结果的影响,并对得到的木质素酚类二聚体产物进一步加氢还原,得到C_13~19烷烃燃料.结果表明,当物料比n(木质素酚类单体)/n(醛酮类中间小分子)为15:3,以Amberlyst-15为酸性催化剂,在100 ℃的条件下,反应24 h,可以得到68%产率的二聚体化合物(当底物是愈创木酚和丙醛时).将得到的二聚体化合物在270 ℃,4 MPa H₂的不锈钢反应釜中进行加氢反应,3 h后,二聚体化合物完全转化为液体烷烃.提出从木质素单体出发通过引入中间小分子,实现C-C链增长来制备烷烃燃料的合成路线,为木质素的开发和应用提出了新思路与实验基础.     

LaFeO3催化剂在木质素湿法氧化合成芳香醛反应中的活性与稳定性

利用溶胶-凝胶法制备了钙钛矿型复合氧化物LaFeO3, 利用X射线衍射、扫描电子显微镜、 X射线光电子能谱和N2吸附等表征手段考察了所制备样品的结构、形貌、表面物种和比表面积,并将其作为催化剂用于木质素湿法氧化合成芳香醛的反应中. 结果表明,该催化剂具有较高的活性和稳定性. 在适当的反应条件下, LaFeO3催化剂能显著提高木质素的转化率以及各芳香醛的产率,紫丁香醛的产率提高幅度大于香草醛和对羟基苯甲醛,紫丁香醛的最大产率是无催化剂反应时的1.85倍. 催化剂连续使用5次后仍能保持较高的活性,且体相结构没有发生明显的变化.     

电催化氧化木质素解聚:温和高效的生物质增值策略（英文）

木质素是一种天然可再生芳香族聚合物,通过催化反应过程可实现其解聚制备芳香族化学品,其高附加值转化对实现生物燃料、精细化学品和大宗化学品的绿色生产具有重要意义.其中,电催化氧化解聚为木质素的高值化利用提供了一种高效节能途径.凭借电催化过程中电位或电流易于调节的特性,可实现产物的选择性和反应物转化率的有效调控.但实现木质素的可控降解,首先需对其解聚机理充分了解掌握.其中,由催化剂、电解质和催化反应池等组成的电催化系统均需合理设计.本文以木质素解聚过程中C—C键和C—O键的断裂机理为基础,综合评述了近年来木质素及其模型化合物在电催化氧化制备芳香族单体过程中不同的断键机制,总结了自由基中间体在C—O和C—C键的高选择性断裂中发挥的决定作用.最后,展望了电催化木质素解聚的发展前景以及面临的挑战.     

木质素氧化降解研究进展

木质素是当今世界上含量第二丰富的可再生高聚物.氧化降解是木质素价值增值过程中一种非常有前景的方法,它能提供高度官能化的单体和低聚物产品作为其他价值增值过程的起始原料,为代替化石燃料在化工和制药行业中的应用提供了一种可能.主要对木质素及其模型化合物的氧化改性方法进行了综述,包括生物催化、仿生催化、有机金属催化、电化学催化氧化及其他几种催化氧化法,并简单讨论了氧化降解过程的反应机理,为今后木质素的氧化价值增值研究提供一定的参考.     

离子液体-水介质中离子液体负载TEMPO催化选择氧化合成脂肪醇羟基芳香醛和酮

由于脂肪醇羟基和苄醇羟基具有相同的氧化反应活性,所以当分子内同时含有脂肪醇羟基和苄醇羟基时,很难选择氧化苄醇羟基合成含脂肪醇羟基的芳香醛或酮。本文报道了在离子液体-水介质中,NCS/NaBr/IL-TEMPO（离子液体负载TEMPO）催化氧化合成含有脂肪醇羟基的芳香醛、酮的方法,反应条件温和,选择性好,收率高,且离子液体和催化剂可以循环使用。     

Pd催化木质素醚类二聚体分子内氢转移断裂C—O键研究

结合氢转移方法,研究了木质素模型物2-(2'-甲氧基苯氧基)-1-苯乙醇(1a)分子在无外加氢源的条件下利用金属钯催化剂催化发生C—O键断裂反应.合成并表征了一系列Pd负载型催化剂,通过优化发现反应体系在环己烷溶剂和弱碱添加剂Na2HPO4条件下显示出较好的催化效率.结合反应特点将催化剂进行改进,使用MgO作为载体的催化剂Pd/MgO高效完成了木质素模型物的分子自供氢降解.反应过程可能分为两步进行:首先,模型物在钯表面先进行脱氢过程,含羟基的木质素模型物二聚体1a脱去氢后生成酮式中间体2-(2'-甲氧基苯氧基)-1-苯乙酮(1b),被脱去的氢原子吸附于钯表面.随后,脱氢中间体1b在Pd催化下与其表面吸附的H作用,发生催化C—O键断键过程.     

木质素模型化合物的裂解工艺及机理的研究进展

化石资源的有限性、不可再生性及其利用所造成的环境污染,使木质生物质资源生产高附加值化学品和燃料受到广泛关注。因木质素是结构复杂的高分子聚合物,其综合有效利用受到极大限制,通常被作为燃料直接燃烧,同时给木质素解聚研究带来了巨大的困难。因此,围绕木质素模型化合物裂解工艺及机理的研究发展迅速。为梳理木质素模型化合物的裂解研究的现状和预测未来发展方向,本文综述了其裂解工艺和机理的研究进展。着重介绍木质素单体、二聚体和多聚体不同裂解工艺的特点、优势、应用前景以及相关的机理,最后预测了木质素模型化合物裂解研究未来的发展方向。     

新型氮芥和卤代烷基哌嗪芳香醛的合成

通过对Vilsmeier反应、烷基化反应和氯化反应的改进提出了以简单易得的苯胺和苯基哌嗪为原料制备氮芥和哌嗪芳香醛的方法. 采用该改进的方法合成了8个氮芥和哌嗪芳香醛, 其中7个为新化合物. 它们的结构均经质谱、红外光谱、核磁共振谱和元素分析确证.     

电催化木质素升级转化成高附加值化学品和燃料的研究进展

为节能减排和能源结构调整以快速实现"碳中和",发展可再生、清洁与绿色的能源以替代传统化石能源已成为当今世界高质量发展的重要共识.生物质能作为一种典型的可再生能源,具有储量丰富、分布广泛、可有效转化成各种化工原料和燃料等特点逐步受到广泛关注并成为科研热点.木质素是生物质的重要组成部分,其含氧量低、热值高,可转化成高热值燃料;同时,木质素富含芳香结构单元,可以转化成各类高附加值化工原料及医药中间体.木质素解聚及其对应单体升级转化是木质素高效转化利用的关键技术.当前,传统热催化是其主要应用技术手段.然而,该类方法常在高温高压下进行,需消耗大量能源及众多繁琐操作步骤,不易规模化生产.相对而言,电催化技术能实现常温常压的木质素解聚及对应单体的升级转化,采用由可再生能源(例如风能、太阳能等)获得的清洁电力,则能实现完全绿色可持续生产,对未来经济社会的发展及"碳中和"的目标具有重大意义.本文综述了近年来电催化技术在木质素升级转化成高附加值燃料和化学品方面的应用,尤其是在木质素解聚及其对应单体于水溶液相关电解质中升级转化方面的应用.(1)针对总体研究背景进行了概述,总结了木质素研究的重要意义并概括了当前木质素研究的主要思路,并简单介绍了木质素结构单元及连接键等基本性质;(2)针对电催化技术在木质素应用方面进行了总结,包括反应类型和反应路径等;(3)总结了木质素常用的几种典型表征技术手段,如GC-MS、NMR、IR等;(4)总结了电催化木质素解聚及其单体升级转化研究现状,对电催化木质素解聚应用中木质素前体类型、电解质种类和电还原/氧化催化剂进行了详细介绍及客观评价,并对几种代表性单体的电催化加氢反应及氧化反应做了详细评述.在此基础上展望了电催化技术在木质素升级转化中的应用前景,指出了当前电催化技术在木质素升级转化应用中存在的实际问题,提出了电催化技术在木质素升级转化中的发展方向.     

植物焦炭氧化中的平行反应及其动力学解析

通过建立多组分平行反应模型和开展非线性动力学解析, 理论上探索植物焦炭氧化中的平行反应以及其对焦炭氧化反应活性影响的机制. 运用高温管式炉并通入高纯氮气制备植物焦炭, 热处理温度分别设定为450、520和800 ℃. 运用同步热分析仪开展空气气氛中植物焦炭线性升温氧化实验, 并通过对热重和质量损失速率实验数据进行拟合以获取焦炭氧化动力学参数值. 解析结果证实, 对于低中热处理温度(450和520 ℃)制得的焦炭, 其质量损失速率及对应的热流率曲线的变化特征主要是由残留木质素、无定形碳及粗脂肪和粗蛋白等其它反应物质的平行氧化反应叠加而成; 当热处理温度达到800 ℃时, 焦炭中活性物质基本为无定形碳, 氧化则可简化为无定形碳的单步反应. 残留木质素氧化反应的活化能最低, 范围为86～147 kJ·mol^-1, 相应的温度作用区间为300～480 ℃; 无定形碳的活化能为174～208 kJ·mol^-1, 反应温度在370～520 ℃之间; 其它物质的反应活化能为214～225 kJ·mol^-1, 温度作用区间在420～510 ℃之间. 焦炭的氧化活性主要由残留木质素含量决定. 随着热处理温度升高, 残留木质素含量降低, 同时另两个反应组分的氧化活化能均有所增大, 导致焦炭的氧化反应活性下降.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.