Organoiron compounds derived from the indium 'carbene analogues', [In(N(Ar)C(Me))2CH] (Ar = dipp = 2,6-iPr2C6H3; = Mes = 2,4,6-Me3C6H2)

Oxidative insertion of the In(I) 'carbene analogues', [In{N(Dipp)C(Me))2CH] (Ar = Dipp = 2,6-iPr2C6H3; Ar = Mes = 2,4,6-Me3C6H2) into the Fe-I bond of [CpFe(CO)2I] occurred cleanly and under mild conditions to yield the In(III) compounds [CH((CH3)2CN-2,6-iPr2C6H3)2In(I)FeCp(CO)2] and [CH( (CH3)2CN-2,4,6-Me3C6H3)2In(I)FeCp(CO)2], which have been fully characterised in solution and the solid state. Attempts to abstract the iodide anion from [CH( (CH3)2CN-2,6-iPr2C6H3)2In(I)FeCp(CO)2] to form cationic species containing a coordinated indium diyl were unsuccessful and resulted in a complex mixture of products from which two ionic species were isolated. Neither cation was found to contain indium by X-ray crystallographic analysis. These observations were indicative of ill-defined decomposition pathways as have been noted by previous workers. A further attempt to form a cationic iron species containing a coordinated [In(N(Dipp)C(Me) )2CH] fragment resulted in oxidation of the iron centre from Fe(II) to Fe(III), with deposition of indium metal, and the isolation of a cationic Fe(III) beta-diketiminate complex.     

Substituted N-picolylethylenediamines of the type (ArNHCH2CH2){(2-C5H4N)CH2}NR [R = Me, 4-CH2=CH(C6H4)CH2, (2-C5H4N)CH2] and their transition metal(II) halide complexes

Alkylation of (ArNHCH2CH2){(2-C5H4N)CH2}NH with RX [RX = MeI, 4-CH2=CH(C6H4)CH2Cl) and (2-C5H5N)CH2Cl] in the presence of base has allowed access to the sterically demanding multidentate nitrogen donor ligands, {(2,4,6-Me3C6H2)NHCH2CH2}{(2-C5H4N)CH2}NMe (L1), {(2,6-Me3C6H3)NHCH2CH2}{(2-C5H4N)CH2}NCH2(C6H4)-4-CH=CH2 (L2) and (ArNHCH2CH2){(2-C5H4N)CH2}2N (Ar = 2,4-Me2C6H3 L3a, 2,6-Me2C6H3 L3b) in moderate yield. L3 can also be prepared in higher yield by the reaction of (NH2CH2CH2){(2-C5H4N)CH2}2N with the corresponding aryl bromide in the presence of base and a palladium(0) catalyst. Treatment of L1 or L2 with MCl2 [MCl2 = CoCl2.6H2O or FeCl2(THF)1.5] in THF affords the high spin complexes [(L1)MCl2](M = Co 1a, Fe 1b) and [(L2)MCl2](M = Co 2a, Fe 2b) in good yield, respectively; the molecular structure of reveals a five-coordinate metal centre with bound in a facial fashion. The six-coordinate complexes, [(L3a)MCl2](M = Co 3a, Fe 3b, Mn 3c) are accessible on treatment of tripodal L3a with MCl2. In contrast, the reaction with the more sterically encumbered leads to the pseudo-five-coordinate species [(L3b)MCl2](M = Co 4a, Fe 4b) and, in the case of manganese, dimeric [(L3b)MnCl(mu-Cl)]2 (4c); in 4a and 4b the aryl-substituted amine arm forms a partial interaction with the metal centre while in 4c the arm is pendant. The single crystal X-ray structures of , 1a, 3b.MeCN, 3c.MeCN, 4b.MeCN and 4c are described as are the solution state properties of 3b and 4b.     

Probing lead(II) bonding environments in 4-substituted pyridine adducts of (2,6-Me2C6H3S)2Pb: an X-ray structural and solid-state 207Pb NMR study

The effect of subtle changes in the sigma-electron donor ability of 4-substituted pyridine ligands on the lead(II) coordination environment of (2,6-Me(2)C(6)H(3)S)(2)Pb (1) adducts has been examined. The reaction of 1 with a series of 4-substituted pyridines in toluene or dichloromethane results in the formation of 1:1 complexes [(2,6-Me(2)C(6)H(3)S)(2)Pb(pyCOH)](2) (3), [(2,6-Me(2)C(6)H(3)S)(2)Pb(pyOMe)](2) (4), and (2,6-Me(2)C(6)H(3)S)(2)Pb(pyNMe(2)) (5) (pyCOH = 4-pyridinecarboxaldehyde; pyOMe = 4-methoxypyridine; pyNMe2 = 4-dimethylaminopyridine), all of which have been structurally characterized by X-ray crystallography. The structures of 3 and 4 are dimeric and have psi-trigonal bipyramidal S(3)N bonding environments, with the 4-substituted pyridine nitrogen and bridging sulfur atoms in axial positions and two thiolate sulfur atoms in equatorial sites. Conversely, compound 5 is monomeric and exhibits a psi-trigonal pyramidal S(2)N bonding environment at lead(II). The observed structures may be rationalized in terms of a simple valence bond model and the sigma-electron donor ability of the 4-pyridine ligands as derived from the analysis of proton affinity values. Solid-state (207)Pb NMR experiments are applied in combination with density functional theory (DFT) calculations to provide further insight into the nature of bonding in 4, 5, and (2,6-Me(2)C(6)H(3)S)(2)Pb(py)(2) (2). The lead chemical shielding (CS) tensor parameters of 2, 4, and 5 reveal some of the largest chemical shielding anisotropies (CSA) observed in lead coordination complexes to date. DFT calculations using the Amsterdam Density Functional (ADF) program, which take into account relativistic effects using the zeroth-order regular approximation (ZORA), yield lead CS tensor components and orientations. Paramagnetic contributions to the lead CS tensor from individual pairs of occupied and virtual molecular orbitals (MOs) are examined to gain insight into the origin of the large CSA. The CS tensor is primarily influenced by mixing of the occupied MOs localized on the sulfur and lead atoms with virtual MOs largely comprised of lead 6p orbitals.     

Isomers of a dibismuthane, R2Bi-BiR2 [R = 2,6-(Me2NCH2)2C6H3], and unusual reactions with oxygen: formation of [R2Bi]2(O2) and R'R' 'Bi [R' = 2-(Me2NCH2)-6-{Me2N(O)CH2}C6H3; R' ' = 2-(Me2NCH2)-6-{O(O)C}C6H3

R2Bi-BiR2 [1; R = 2,6-(Me2NCH2)2C6H3], a dibismuthane that exists in different forms in the crystalline state, reacts in air with the formation of the peroxide [R(2)Bi]2(O2) (2) and partial oxidation of the pendant (dimethylamino)methyl groups, yielding the mononuclear bismuth complex R'R' 'Bi (3) [R' = 2-(Me2NCH2)-6-{Me2N(O)CH2}C6H3; R' ' = 2-(Me2NCH2)-6-{O(O)C}C6H3].     

Substituent effects on indium-phosphorus bonding in (4-RC6H4S)3In.PR'3 adducts (R = H, Me, F; R' = Et, Cy, Ph): a spectroscopic, structural, and thermal decomposition study

The tris(arylthiolate)indium(III) complexes (4-RC(6)H(4)S)(3)In [R = H (5), Me (6), F (7)] were prepared from the 2:3 reaction of elemental indium and the corresponding aryl disulfide in methanol. Reaction of 5-7 with 2 equiv of the appropriate triorganylphosphine in benzene or toluene resulted in isolation of the indium-phosphine adduct series (4-RC(6)H(4)S)(3)In.PR'(3) [R = H, R' = Et (5a), Cy (5b), Ph (5c); R = Me, R' = Et (6a), Cy (6b), Ph (6c); R = F, R' = Et (7a), Cy (7b), Ph (7c)]. These compounds were characterized via elemental analysis, FT-IR, FT-Raman, solution (1)H, (13)C{(1)H}, (31)P{(1)H}, and (19)F (7a-c) NMR spectroscopy, and X-ray crystallography (5c, 6a, 6c, and 7a). NMR spectra show retention of the In-P bond in benzene-d(6) solution, with phosphine (31)P{(1)H} signals shifted downfield compared to the uncoordinated ligand. The X-ray structures show monomeric 1:1 adduct complexes in all cases. The In-P bond distance [2.5863(5)-2.6493(12) A] is influenced significantly by the phosphine substituents but is unaffected by the substituted phenylthiolate ligand. Relatively low melting points (88-130 degrees C) are observed for all adducts, while high-temperature thermal decomposition is observed for the indium thiolate reactants 5-7. DSC/TGA and EI-MS data show a two-step thermal decomposition process, involving an initial loss of the phosphine moiety followed by loss of thiolate ligand.     

Monomeric, one- and two-dimensional networks incorporating (2,6-Me2C6H3S)2Pb building blocks

The amine coordination of lead(II) has been examined through the preparation and structural analysis of Lewis base adducts of bis(thiolato)lead(II) complexes. Reaction of Pb(OAc)(2) with 2,6-dimethylbenzenethiol affords (2,6-Me(2)C(6)H(3)S)(2)Pb (6) in high yield. The solubility of 6 in organic solvents allows for the preparation of the 1:2 Lewis acid-base adduct [(2,6-Me(2)C(6)H(3)S)(2)Pb(py)(2)](7), and 1:1 adducts [(2,6-Me(2)C(6)H(3)S)(2)Pb(micro(2)-bipy)](infinity](8) and [(2,6-Me(2)C(6)H(3)S)(2)Pb(micro(2)-pyr)](infinity)(9)(where py = pyridine, bipy = 4,4'-bipyridyl and pyr = pyrazine) from reaction with an excess of the appropriate amine. In contrast to 7, reaction of (C(6)H(5)S)(2)Pb (1) with pyridine afforded the 2:1 adduct [(C(6)H(5)S)(4)Pb(2)(py)](infinity)(10). Compounds were characterized via elemental analysis, FT-IR, solution (1)H and (13)C[(1)H](6) NMR spectroscopy, and X-ray crystallography (7-10). The structures of 7-9 show the thiolate groups occupying two equatorial positions and two amine nitrogen atoms occupying axial coordination sites, yielding distorted see-saw coordination geometries, or distorted trigonal bipyramids if an equatorial lone pair on lead is considered. The absence of intermolecular contacts in 7 and 8 result in monomeric and one-dimensional polymeric structures, respectively. Weak Pb...S intermolecular contacts in 9 result in the formation of a two-dimensional macrostructure. In contrast, the structure of , shows extensive intermolecular Pb...S interactions, resulting in five- and six-coordinate bonding environments for lead(II), and a complex polymeric structure in the solid state. This demonstrates the ability of the 2,6-dimethylphenylthiolate ligand to limit intermolecular lead-sulfur interactions, while allowing the axial coordination of amine Lewis base ligands.     

Proton transfer to nickel-thiolate complexes. 2. Rate-limiting intramolecular proton transfer in the reactions of [Ni(SC(6)H(4)R-4)(PhP[CH(2)CH(2)PPh(2)](2))](+) (R = NO(2), Cl, H, Me, or MeO)

The protonation of [Ni(SC(6)H(4)R-4)(triphos)](+) (triphos = PhP[CH(2)CH(2)PPh(2)](2); R = NO(2), Cl, H, Me, or MeO) by [lutH](+) (lut = 2,6-dimethylpyridine) to form [Ni(S(H)C(6)H(4)R-4)(triphos)](2+) is an equilibrium reaction in MeCN. Kinetic studies, using stopped-flow spectrophotometry, reveal that the reactions occur by a two-step mechanism. Initially, [lutH](+) rapidly binds to the complex (K(2)(R)) in an interaction which probably involves hydrogen-bonding of the acid to the sulfur. Subsequent intramolecular proton transfer from [lutH](+) to sulfur (k(3)(R)) is slow because of both electronic and steric factors. The X-ray crystal structures of [Ni(SC(6)H(4)R-4)(triphos)](+) (R = NO(2), H, Me, or MeO) show that all are best described as square-planar complexes, with the phenyl substituents of the triphos ligand presenting an appreciable barrier to the approach of the sterically demanding [lutH](+) to the sulfur. The kinetic characteristics of the intramolecular proton transfer from [lutH](+) to sulfur have been investigated. The rate of intramolecular proton transfer exhibits a nonlinear dependence on Hammett sigma(+), with both electron-releasing and electron-withdrawing 4-R-substituents on the coordinated thiolate facilitating the rate of proton transfer (NO(2) > Cl > H > Me < MeO). The rate constants for intramolecular proton transfer correlate well with the calculated electron density of the sulfur. The temperature dependence of the rate of the intramolecular proton transfer reactions shows that deltaH() is small but increases as the 4-R-substituent becomes more electron-withdrawing [deltaH = 4.1 (MeO), 6.9 (Me), 11.4 kcal mol(-)(1) (NO(2))], while DeltaS() becomes progressively less negative [deltaS = -50.1 (MeO), -41.2 (Me), -16.4 (NO(2)) cal K(-)(1) mol(-)(1)]. Studies with [lutD](+) show that the rate of intramolecular proton transfer varies with the 4-R-substituent [(k(3)(NO)2)(H)/(k(3)(NO)2)(D) = 0.39; (k(3)(Cl))(H)/(k(3)(Cl))(D) = 0.88; (k(3)(Me))(H)/(k(3)(Me))(D) = 1.3; (k(3)(MeO))(H)/(k(3)(MeO))(D) = 1.2].     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Synthesis, structure, reactivity, and thermal isomerization of boron-substituted 13-vertex cobaltacarboranes (eta5-Cp)Co(eta6-R2C2B10Me8H2) (R = H, Et)

Reduction of boron-substituted carboranes o-R2C2B10Me8H2 (R = H, Et), thermal isomerization, and nucleophilic reaction of the resultant 13-vertex cobaltacarboranes were studied. Reaction of o-C2B10Me8H4 (1) with excess potassium metal in tetrahydrofuran (THF) gave, after recrystallization from a THF solution of 18-crown-6 ether, [[K(18-crown-6)(THF)2][K(18-crown-6)]][[4-(18-crown-6)-2,3,5,8,9,11,12,13-Me8-4,1,6-KC2B10H4]2] (2) in 78% yield. Interaction of 1 with excess sodium or potassium metal in THF, followed by treatment with CoCl2/CpNa and then aerobatic oxidation, afforded two boron-substituted 13-vertex cobaltacarboranes, 4-Cp-2,3,5,8,9,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (3) and 4-Cp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (4), in 15% and 8% yield, respectively. Subsequently, thermal isomerization of 3 and 4 yielded another two new isomers, 4-Cp-2,3,5,6,8,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (5) and 4-Cp-2,3,5,6,7,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (6). Treatment of 3 or 4 with strong bases such as nBuLi and MeLi generated unexpected nucleophilic substitution products 4-nBuCp-2,3,5,8,9,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (7), 4-nBuCp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (8a), and 4-MeCp-2,3,5,9,10,11,12,13-Me8-4,1,6-CoC2B10Me8H4 (8b) in good yields. Under the same reaction conditions, however, only one 13-vertex cobaltacarborane, 4-Cp-1,9-Et2-2,5,6,7,8,11,12,13-Me8-4,1,9-CoC2B10Me8H4 (10), was isolated when o-Et2C2B10Me8H2 (9) was used as the starting material. Complex 10 is a thermodynamically stable product and has a substitution pattern different from that of 3-6. These results show that the substituents on either the cage carbon or boron atoms have an important effect on the formation and thermal stability of the 13-vertex metallacarboranes. The formation of these complexes can be rationalized by the diamond-square-diamond mechanism.     

Syntheses and structures of the arylaluminum chalcogenides (ArAlE)2 (Ar = 2-(NEt2CH2)-6-MeC6H3, E = Se; Ar = 2,6-(NEt2CH2)2C6H3, E = Se, Te)

Two intramolecular stabilized arylaluminum dihydrides, (2-(NEt2CH2)-6-MeC6H3)AlH2 (1) and (2,6-(NEt2CH2)2C6H3)AlH2 (2), were prepared by reducing the corresponding dichlorides with an excess of LiAlH4 in diethyl ether. Reactions of 1 and 2 with elemental selenium afforded the dimeric arylaluminum selenides [(2-(NEt2CH2)-6-MeC6H3)AlSe]2 (3) and [(2,6-(NEt2CH2)2C6H3)AlSe]2 (4). Reaction of 2 with metallic tellurium gave the dimeric arylaluminum telluride [(2,6-(NEt2CH2)2C6H3)AlTe]2 (5). The possible reaction pathway is discussed, and molecular structures determined by single-crystal X-ray analyses are presented for 3 and 5.     

Hypervalent organobismuth(iii) carbonate, chalcogenides and halides with the pendant arm ligands 2-(Me2NCH2)C6H4 and 2,6-(Me2NCH2)2C6H3

R2BiOH (1) [R = 2-(Me2NCH2)C6H4] and (R2Bi)2O (2) are formed by hydrolysis of R2BiCl with KOH. Single crystals of were obtained by air oxidation of (R2Bi)2. The reaction of R2BiCl and Na2CO3 leads to (R2Bi)2CO3 (3). 3 is also formed by the absorption of CO2 from the air in solutions of 1 or 2 in diethyl ether or toluene. (R2Bi)2S (4) is obtained from R2BiCl and Na2S or from (R2Bi)2 and S8. Exchange reactions between R2BiCl and KBr or NaI give R2BiX [X = Br (5), I (6)]. The reaction of RBiCl2 (7) with Na2S and [W(CO)5(THF)] gives cyclo-(RBiS)2[W(CO)5]2 (8). cyclo-(R'BiS)2 (9) [R' = 2,6-(Me2NCH2)2C6H3] is formed by reaction of R'BiCl2 and Na2S. The structures of were determined by single-crystal X-ray diffraction.     

Bismuth coordination chemistry with allyl, alkoxide, aryloxide, and tetraphenylborate ligands and the {[2,6-(Me2NCH2)2C6H3]2Bi}+ cation

A series of bis(aryl) bismuth compounds containing (N,C,N)-pincer ligands, [2,6-(Me(2)NCH(2))(2)C(6)H(3)](-) (Ar'), have been synthesized and structurally characterized to compare the coordination chemistry of Bi(3+) with similarly sized lanthanide ions, Ln(3+). Treatment of Ar'(2)BiCl, 1, with ClMg(CH(2)CH═CH(2)) affords the allyl complex Ar'(2)Bi(η(1)-CH(2)CH═CH(2)), 2, in which only one allyl carbon atom coordinates to bismuth. Complex 1 reacts with KO(t)Bu and KOC(6)H(3)Me(2)-2,6 to yield the alkoxide Ar'(2)Bi(O(t)Bu), 3, and aryloxide Ar'(2)Bi(OC(6)H(3)Me(2)-2,6), 4, respectively, but the analogous reaction with the larger KOC(6)H(3)(t)Bu(2)-2,6 forms [Ar'(2)Bi][OC(6)H(3)(t)Bu(2)-2,6], 6, in which the aryloxide ligand acts as an outer sphere anion. Chloride is removed from 1 by NaBPh(4) to form [Ar'(2)Bi][BPh(4)], 5, which crystallizes from THF in an unsolvated form with tetraphenylborate as an outer sphere counteranion.     

In(8)(C(6)H(3)-2,6-Mes(2))(4) (Mes=C(6)H(2)-2,4,6-Me(3)): A Metal-Rich Main-Group Cluster with a Distorted Cubane Structure

A distorted In(8) cubane core (see picture) is present in the novel indium cluster In(8)(C(6)H(3)-2,6-Mes(2))(4) (Mes=C(6)H(2)-2,4,6-Me(3)), which was synthesized by the reaction of LiC(6)H(3)-2,6-Mes(2) with InCl. It has an average In-In bond length of 2.92 ? and represents a new addition to the range of heavier Group 13 element clusters.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Structure and Properties of [Fe(4)S(4){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-) and [Fe(2)S(2){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-): Protection of the Fe-S Bond by Double NH.S Hydrogen Bonds

Iron-sulfur clusters containing a singly or doubly NH.S hydrogen-bonded arenethiolate ligand, [Fe(4)S(4)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), [Fe(4)S(4){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), [Fe(2)S(2)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), and [Fe(2)S(2){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), were synthesized as models of bacterial [4Fe-4S] and plant-type [2Fe-2S] ferredoxins. The X-ray structures and IR spectra of (PPh(4))(2)[Fe(4)S(4){S-2,6-(CH(3)CONH)(2)C(6)H(3)}(4)].2CH(3)CN and (NEt(4))(2)[Fe(2)S(2){S-2,6-(t-BuCONH)(2)C(6)H(3)}(4)] indicate that the two amide NH groups at the o,o'-positions are directed to the thiolate sulfur atom and form double NH.S hydrogen bonds. The NH.S hydrogen bond contributes to the positive shift of the redox potential of not only (Fe(4)S(4))(+)/(Fe(4)S(4))(2+) but also (Fe(4)S(4))(2+)/(Fe(4)S(4))(3+) in the [4Fe-4S] clusters as well as (Fe(2)S(2))(2+)/(Fe(2)S(2))(3+) in the [2Fe-2S] clusters. The doubly NH.S hydrogen-bonded thiolate ligand effectively prevents the ligand exchange reaction by benzenethiol because the two amide NH groups stabilize the thiolate by protection from dissociation.     

Studies on the properties of organoselenium(IV) fluorides and azides

The reaction of organoselenides and -diselenides (R2Se and (RSe)2) with XeF2 furnished the corresponding organoselenium(IV) difluorides R2SeF2 (R=Me (1), Et (2), iPr (3), Ph (4), Mes (=2,4,6-(Me)3C6H2) (5), Tipp (=2,4,6-(iPr)3C6H2) (6), 2-Me 2NCH2C6H4 (7)), and trifluorides RSeF3 (R=Me (8), iPr (9), Ph (10), Mes (11), Tipp (12), Mes* (=2,4,6-(tBu) 3C6H2) (13), 2-Me2NCH2C6H4 (14)), respectively. In addition to characterization by multinuclear NMR spectroscopy, the first molecular structure of an organoselenium(IV) difluoride as well as the molecular structures of subsequent decomposition products have been determined. The substitution of fluorine atoms with Me3SiN3 leads to the corresponding organoselenium(IV) diazides R2Se(N3)2 (R=Me (15), Et (16), iPr (17), Ph (18), Mes (19), 2-Me 2NCH2C6H4 (20)) and triazides RSe(N3)3 (R=Me (21), iPr (22), Ph (23), Mes (24), Tipp (25), Mes* (26), 2-Me2NCH2C6H4 (27)), respectively. The organoselenium azides are extremely temperature-sensitive materials and can only be handled at low temperatures.     

Characterization of the sterically encumbered terphenyl-substituted species 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, an unsymmetric, group 14 element, methylmethylene, valence isomer of an alkene, its related lithium derivative 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)C6H3-2,6-Trip2, and the monomer Sn(t-Bu)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3)

The reaction of the recently reported sterically encumbered terphenyl tin(II) halide species Sn(Cl)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3), 1, with 1 equiv of MeLi or MeMgBr afforded 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, 2, which is the first stable group 14 element methylmethylene (i.e., CH3CH) analogue of ethylene (H2CCH2). Reaction of 1 with 1.5 equiv of MeLi yielded the stannylstannate species 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)-C6H3-2,6-Trip2, 3, whereas reaction of 1 with 1 equiv of t-BuLi gave the heteroleptic stannanediyl monomer Sn(t-Bu)C6H3-2,6-Trip2 (4). The compounds 2-4 were characterized by 1H, 13C (7Li, 3 only), and 119Sn NMR spectroscopy in solution and by UV-vis spectroscopy. The X-ray crystal structures of 2-4 were also determined. The formation of the stannylstannanediyl 2 instead of the expected symmetrical, valence isomer "distannene" form (Sn(Me)C6H3-2,6-Trip2)2, 6, is explained through the ready formation of LiSn(Me)2C6H3-2,6-Trip2, 5, which reacts rapidly with 1 to produce 2 which can then react with a further equivalent of MeLi to give 3. The stability of singly bonded 2 in relation to the formally doubly bonded 6 was rationalized on the basis of the difference in the strength of their tin-tin bonds. In contrast to the methyl derivatives, the reaction of 1 with t-BuLi proceeded smoothly to give the monomeric compound 4. Apparently, the formation of a t-Bu analogue of 5 was prevented by the more crowding t-Bu group. Compound 2 is also the first example of a stable molecule with bonding between a two-coordinate, bivalent tin and four-coordinate tetravalent tin. Both compounds 2 and 3 display large J 119Sn-119Sn couplings between their tin nuclei and the tin-tin bond lengths in 2 (2.8909(2) A) and 3 (2.8508(4) A) are relatively normal despite the presence of the sterically crowding terphenyl substituents.     

Reaction of the stable silylene Si[(NCH2But)2C6H4-1,2] with lithium amides

The thermally stable silylene Si[(NCH2But)2C6H4-1,2] 1 undergoes oxidative addition reactions with the lithium amides LiNRR'(R = SiMe3, R' = But; R = SiMe3, R' = C6H3Me2-2,6; R = R' = Me or R = R' = Pri) to afford the new lithium amides Li(THF)2[N(R)Si(SiMe3){(NCH2But)2C6H4-1,2}][R = But2 or R = C6H3Me2-2,6 (3a)] or the new tris(amino)functionalised silyllithiums Li(THF)x[Si{(NCH2But)2C6H4-1,2}NRR'][R = SiMe3, R' = C6H3Me2-2,6, x = 2 (3); R = R'= Me, x = 3 (4) or R = R' = Pri, x = 3 (5)]. Compounds 4 and 5 are stable at ambient temperature but compound 3 is thermally labile and converts into 3a upon heating. The pathway for the formation of 2 and 3 is discussed and the X-ray structures of 2-5 are presented.     

Diorganodiselenides and zinc(II) organoselenolates containing (imino)aryl groups of type 2-(RN=CH)C6H4

Several new diorganodiselenides containing (imino)aryl groups, [2-(RN[double bond, length as m-dash]CH)C(6)H(4)](2)Se(2) [R = Me(2)NCH(2)CH(2) (4), O(CH(2)CH(2))(2)NCH(2)CH(2) (5), PhCH(2) (6), 2',6'-(i)Pr(2)C(6)H(3) (7)] were obtained by reacting [2-{(O)CH}C(6)H(4)](2)Se(2) (3) with RNH(2). Treatment of the diselenides 6 and 7 with stoichiometric amounts of K-selectride or Na resulted in isolation of the selenolates K[SeC(6)H(4)(CH[double bond, length as m-dash]NCH(2)Ph)-2] (9) and Na[SeC(6)H(4)(CH[double bond, length as m-dash]NC(6)H(3)(i)Pr(2)-2',6')-2] (10), respectively. The reaction of potassium selenolates with anhydrous ZnCl(2) (2:1 molar ratio) gave Zn[SeC(6)H(4)(CH=NCH(2)Ph)-2](2) (11) and Zn[SeC(6)H(4)(CH[double bond, length as m-dash]NC(6)H(3)(i)Pr(2)-2',6')-2](2) (12). When the dark green solution obtained from diselenide 7 and an excess of Na (after removal of the unreacted metal) was reacted with anhydrous ZnCl(2) a carbon-carbon coupling reaction occurred and the 9,10-(2',6'-(i)Pr(2)C(6)H(3)NH)(2)C(14)H(10) (8) species was obtained. The compounds were investigated in solution by multinuclear NMR ((1)H, (13)C, (77)Se, including 2D and variable temperature experiments) and by mass spectrometry. The molecular structures of 6, 8, 11 and 12 were established by single-crystal X-ray diffraction. All compounds are monomeric in the solid state. In the diselenide 6 the (imino)aryl group acts as a (C,N)-ligand resulting in a distorted T-shaped coordination geometry of type (C,N)SeX (X = Se). For the zinc complexes 11 and 12 the (Se,N) chelate pattern of the selenolato ligands results in tetrahedral Zn(Se,N)(2) cores.     

Homodinuclear iron thiolate nitrosyl compounds [(ON)Fe(S,S-C6H4)2 Fe(NO)2]- and [(ON)Fe(SO2,S-C6H4)(S,S-C6H4)Fe(NO)2]- with {Fe(NO)}7-{Fe(NO)2}9 electronic coupling: new members of a class of dinitrosyl iron complexes

Reaction of Fe(CO)2(NO)2 and [(ON)Fe(S,S-C6H3R)2]- (R = H (1), CH3 (1-Me))/[(ON)Fe(SO2,S-C6H4)(S,S-C6H4)]- (4) in THF afforded the diiron thiolate/sulfinate nitrosyl complexes [(ON)Fe(S,S-C6H3R)2 Fe(NO)2]- (R = H (2), CH3 (2-Me)) and [(ON)Fe(S,SO2-C6H4)(S,S-C6H4)Fe(NO)2]- (3), respectively. The average N-O bond lengths ([Fe(NO)2] unit) of 1.167(3) and 1.162(4) A in complexes 2 and 3 are consistent with the average N-O bond length of 1.165 A observed in the other structurally characterized dinitrosyl iron complexes with an {Fe(NO)2}9 core. The lower nu(15NO) value (1682 cm(-1) (KBr)) of the [(15NO)FeS4] fragment of [(15NO)Fe(S,S-C6H3CH3)2 Fe(NO)2]- (2-Me-15N), compared to that of [(15NO)Fe(S,S-C6H3CH3)2]- (1-Me-15N) (1727 cm(-1) (KBr)), implicates the electron transfer from {Fe(NO)2}10 Fe(CO)2(NO)2 to complex 1-Me/1 may occur in the process of formation of complex 2-Me/2. Then, the electronic structures of the [(NO)FeS4] and [S2Fe(NO)2] cores of complexes 2, 2-Me, and 3 were best assigned according to the Feltham-Enemark notation as the {Fe(NO)}7-{Fe(NO)2}9 coupling (antiferromagnetic interaction with a J value of -182 cm(-1) for complex 2) to account for the absence of paramagnetism (SQUID) and the EPR signal. On the basis of Fe-N(O) and N-O bond distances, the dinitrosyliron {L2Fe(NO)2} derivatives having an Fe-N(O) distance of approximately 1.670 A and a N-O distance of approximately 1.165 A are best assigned as {Fe(NO)2}9 electronic structures, whereas the Fe-N(O) distance of approximately 1.650 A and N-O distance of approximately 1.190 A probably imply an {Fe(NO)2}10 electronic structure.