Cyclopentadienyl Dicarbonyl Iron‐Bismuth Compounds – Synthesis,Structure, and Reactivity

Abstract. The cyclopentadienyl‐substituted iron‐bismuth complexes [{Cp(CO)₂Fe}BiCl₂] ( 1 ), [{Cp(CO)₂Fe}BiBr₂] ( 2 ), [{Cp′′(CO)₂Fe}BiBr₂] ( 3 ) and [{Cp*(CO)₂Fe}BiBr₂] ( 4 ) were prepared with high yields starting from [Cp^x(CO)₂Fe]₂ [Cp^x = C₅H₅ (Cp), C₅H₃‐1, 3‐tBu₂ (Cp′′), C₅Me₅ (Cp*)] and the corresponding bismuth halides. The single crystal X‐ray structure analyses of compounds 2 – 4 are reported. Comparison of their solubility demonstrates that the steric hindrance in this type of compounds is only slightly higher for compound 3 compared with compound 2 but significantly lower compared with the Cp* derivative 4 . Compounds 1 – 4 react with nucleophililic reagents such as KOtBu, NaOCH₂CH₂OCH₃, and NaOSiMe₃ as well as with water in the presence of an amine to give a mixture of [{Cp^x(CO)₂Fe}BiX] (X = Cl, Br) and [{Cp^x(CO)₂Fe}₃Bi]. In case of a reaction with nBu₄NCl and DMAP (dimethylaminopyridine) no such dismutation is observed. Instead the complexes [{Cp(CO)₂Fe}BiBr₂(DMAP)₂] ( 5 ), [NnBu₄]₂[{{Cp(CO)₂Fe}BiBr₃}₂] ( 6 ) and [NnBu₄]₂[{{Cp(CO)₂Fe}BiCl₃}₂] ( 7 ) were isolated and characterized by single‐crystal X‐ray diffraction.     

The molecular structure of high‐spin (S = ) manganese(II) phthalocyanine in tetrabutylammonium bromido(phthalocyaninato)manganese(II)

The title complex salt, (C₁₆H₃₆N)[MnBr(C₃₂H₁₆N₈)] or (TBA)[Mn^IIBr(Pc)] (TBA is tetrabutylammonium and Pc is phthalocyaninate), has been obtained as single crystals by the diffusion technique and its crystal structure was determined using X‐ray diffraction. The high‐spin (S = ) [Mn^IIBr(Pc)]⁻ macrocycle has a concave conformation, with an average equatorial Mn—N(Pc) bond length of 2.1187 (19) Å, an axial Mn—Br bond length of 2.5493 (7) Å and with the Mn^II cation displaced out of the 24‐atom Pc plane by 0.894 (2) Å. The geometry of the Mn^IIN₄ fragment in [Mn^IIBr(Pc)]⁻ is similar to that of the high‐spin (S = ) manganese(II) tetraphenylporphyrin (TPP) in [Mn^II(1‐MeIm)(TPP)] (1‐MeIm is 1‐methylimidazole).     

Anion‐, Solvent‐, Temperature‐, and Mechano‐Responsive Photoluminescence in Gold(I) Diphosphine‐Based Dimers

A series of [Au₂(nixantphos)₂](X)₂ (nixantphos=4,6‐bis(diphenylphosphino)‐phenoxazine; X=NO₃, 1 ; CF₃COO, 2 ; CF₃SO₃, 3 ; [Au(CN)₂], 4 ; and BF₄, 5 ) complexes that exhibit intriguing anion‐switchable and stimuli‐responsive luminescent photophysical properties have been synthesized and characterized. Depending on their anions, these complexes display yellow ( 3 ), orange ( 4 and 5 ), and red ( 1 and 2 ) emission colors. They exhibit reversible thermo‐, mechano‐, and vapochromic luminescence changes readily perceivable by the naked eye. Single‐crystal X‐ray studies show that the [Au₂(nixantphos)₂]²⁺ cations with short intramolecular Au ??? Au interactions are involved as donors in an infinite N?H ??? X (X=O and N) hydrogen‐bonded chain formation with CF₃COO^? ( 2 C ) and aurophilically linked [Au(CN)₂]^? counterions ( 4 C ). Both crystals show thermochromic luminescence; their room temperature red ( 2 C ) and orange ( 4 C ) emission turns into yellow upon cooling to 77 K. They also exhibit reversible mechanochromic luminescence by changing their emission color from red to dark ( 2 C ), and orange to red ( 4 C ). Compounds 1 – 5 also display reversible mechanochromic luminescence, altering their emission colors between orange ( 1 ) or red ( 2 ) to dark, as well as between yellow ( 3 ) or orange ( 4 and 5 ) to red. Detailed photophysical investigations and correlation with solid‐state structural data established the significant role of N?H ??? X interactions in the stimuli‐responsive luminescent behavior.     

Darstellung,Kristallstrukturen, Schwingungsspektren und Normalkoordinatenanalysen der Tetrahalogeno‐bis‐Pyridin‐Osmium(III)‐Komplexe cis‐(n‐Bu4N)[OsCl4Py2] und trans‐(n‐Bu4N)[OsX4Py2], X = Cl,Br

Synthesis, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analyses of the Tetrahalogeno‐bis‐Pyridine‐Osmium(III) Complexes cis ‐( n ‐Bu₄N)[OsCl₄Py₂] and trans ‐( n ‐Bu₄N)[OsX₄Py₂], X = Cl, Br By reaction of (n‐Bu₄N)₂[OsX₆], X = Cl, Br, with pyridine and (n‐Bu₄N)[BH₄] tetrahalogeno‐bis‐pyridine‐osmium(III) complexes are formed and purified by chromatography. X‐ray structure determinations on single crystals have been performed of cis‐(n‐Bu₄N)[OsCl₄Py₂] ( 1 ) (triclinic, space group P1, a = 9.4047(9), b = 10.8424(18), c = 17.007(2) Å, α = 71.833(2), β = 81.249(10), γ = 67.209(12)°, Z = 2), trans‐(n‐Bu₄N)[OsCl₄Py₂] ( 2 ) (orthorhombic, space group P2₁2₁2₁, a = 8.7709(12), b = 20.551(4), c = 17.174(4) Å, Z = 4) and trans‐(n‐Bu₄N)[OsBr₄Py₂] ( 3 ) (triclinic, space group P1, a = 9.132(3), b = 12.053(3), c = 15.398(2) Å, α = 95.551(18), β = 94.12(2), γ = 106.529(19)°, Z = 2). Based on the molecular parameters of the X‐ray structure determinations and assuming C₂ point symmetry for the anion of 1 and D_2h point symmetry for the anions of 2 and 3 the IR and Raman spectra are assigned by normal coordinate analysis. The valence force constants of 1 are in the Cl–Os–Cl axis f_d(OsCl) = 1.58, in the asymmetrically coordinated N′–Os–Cl ^· axes f_d(OsCl ^· ) = 1.45, f_d(OsN′) = 2.48, of 2 f_d(OsCl) = 1.62, f_d(OsN) = 2.42 and of 3 f_d(OsBr) = 1.39 and f_d(OsN) = 2.34 mdyn/Å.     

Bis(8‐quinolinolato‐N,O)platinum(II) and its synthetic intermediate, 8‐hydroxyquinolinium dichloro(8‐quinolinolato‐N,O)platinate(II) tetrahydrate

Bis(8‐quinolinolato‐N,O)­platinum(II), [Pt(C₉H₆NO)₂], (I), has a centrosymmetric planar structure with trans coordination. The molecules form an inclined π stack, with an interplanar spacing of 3.400 (6) Å. 8‐Hydroxy­quinolinium dichloro(8‐quinolinolato‐N,O)­platinate(II) tetrahydrate, (C₉H₈NO)[PtCl₂(C₉H₆NO)]·4H₂O, (II), is soluble in water and is regarded as the synthetic intermediate of the insoluble neutral compound (I). The uncoordinated 8‐hydroxy­quinolinium cations and the monoquinolinolate complexes form an alternating π stack. The origins of fluorescence and phosphorescence in (II) are assigned to the 8‐hydroxy­quinolinium cation and the monoquinolinolate–Pt complex, respectively.     

Near‐IR Emitting Iridium(III) Complexes with Heteroaromatic β‐Diketonate Ancillary Ligands for Efficient Solution‐Processed OLEDs: Structure–Property Correlations

Three NIR‐emitting neutral Ir^III complexes [Ir(iqbt)₂(dpm)] ( 1 ), [Ir(iqbt)₂(tta)] ( 2 ), and [Ir(iqbt)₂(dtdk)] ( 3 ) based on the 1‐(benzo[b]thiophen‐2‐yl)‐isoquinolinate (iqtb) were synthesized and characterized (dpm=2,2,6,6‐tetramethyl‐3,5‐heptanedionate; tta=2‐thienoyltrifluoroacetonate; dtdk=1,3‐di(thiophen‐2‐yl)propane‐1,3‐dionate). The compounds emit between λ=680 and 850 nm with high luminescence quantum yields (up to 16 %). By combining electrochemistry, photophysical measurements, and computational modelling, the relationship between the structure, energy levels, and properties were investigated. NIR‐emitting, solution‐processed phosphorescent organic light‐emitting devices (PHOLEDs) were fabricated using the complexes. The devices show remarkable external quantum efficiencies (above 3 % with 1 ) with negligible efficiency roll‐off values, exceeding the highest reported values for solution‐processible NIR emitters.     

Crystallographic report: [N,N′‐Bis‐(6‐methylpyrid‐2‐ylium)‐(1R,2R)‐1,2‐diaminocyclohexane] bis‐[(p‐cymene)‐ trichlororuthenate(II)]

The chiral compound (H₂cydiampy)[RuCl₃(p‐cymene)]₂ has been obtained in high yield by treating [RuCl₂(p‐cymene)]₂ with an excess of hydrochloric acid in the presence of one equivalent of N,N′‐bis‐(6‐methylpyrid‐2‐yl)‐(1R,2R)‐1,2‐diaminocyclohexane (cydiampy). It crystallizes in the chiral tetragonal space group P4₃2₁2, with half of the atoms of the dication related to the other half by a crystallographic C₂ axis that also makes equivalent the two anionic metal moieties. Copyright © 2005 John Wiley & Sons, Ltd.     

Bi37InBr48: Eine polares Subhalogenid mit Bi95+‐Polykationen,komplexen Bromobismutat(III)‐Anionen [Bi3Br13]4— und [Bi7Br30]9— sowie Pentabromoindat(III)‐Anionen [InBr5]2—

Bi₃₇InBr₄₈: a Polar Subhalide with Bi₉⁵⁺ Polycations, Complex Bromobismuthate(III) Anions [Bi₃Br₁₃]^4— and [Bi₇Br₃₀]^9—, and Pentabromoindate(III) Anions [InBr₅]^2— Black crystals of Bi₃₇InBr₄₈ were synthesized from bismuth, indium and BiBr₃ by cooling stoichiometric melts from 570 K to 470 K. X‐ray diffraction on powders and single‐crystals revealed that the compound crystallizes with space group P 6₃ (a = 2262.6(4); c = 1305.6(2) pm). The Bi₉⁵⁺ polycations in the polar crystal structure have the shape of heavily distorted tri‐capped trigonal prisms with approximate C_s symmetry. The high complexity of the structure results from three coexisting types of anionic groups: Three edge‐sharing [BiBr₆] octahedra constitute the trigonal bromobismuthate(III) anion [Bi₃Br₁₃]^4—. Four [BiBr₆] and three [BiBr₅] polyhedra share common vertices to form the [Bi₇Br₃₀]^9— hemi‐sphere, in which the trigonal bipyramid of the pentabromoindat(III) ion [InBr₅]^2— is embedded.     

Structural Optimization of Interpenetrated Pillared‐Layer Coordination Polymers for Ethylene/Ethane Separation

With the goal of achieving effective ethylene/ethane separation, we evaluated the gas sorption properties of four pillared‐layer‐type porous coordination polymers with double interpenetration, [Zn₂(tp)₂(bpy)]_n ( 1 ), [Zn₂(fm)₂(bpe)]_n ( 2 ), [Zn₂(fm)₂(bpa)]_n ( 3 ), and [Zn₂(fm)₂(bpy)]_n ( 4 ) (tp=terephthalate, bpy=4,4′‐bipyridyl, fm=fumarate, bpe=1,2‐di(4‐pyridyl)ethylene and bpa=1,2‐di(4‐pyridyl)ethane). It was found that 4 , which contains the narrowest pores of all of these compounds, exhibited ethylene‐selective sorption profiles. The ethylene selectivity of 4 was estimated to be 4.6 at 298 K based on breakthrough experiments using ethylene/ethane gas mixtures. In addition, 4 exhibited a good regeneration ability compared with a conventional porous material.     

Ein Beitrag zu Rhenium(II)‐, Osmium(II)‐ und Technetium(II)‐Thionitrosylkomplexen vom Typ [M(NS)Cl4py]—: Darstellung,Strukturen und EPR‐Spektren

A Contribution to Rhenium(II)‐, Osmium(II)‐, and Technetium(II)‐Thionitrosyl‐Complexes: Preparation, Structures, and EPR‐Spectra The reaction of [Re^VINCl₄]^— and [Os^VINCl₄]^— with S₂Cl₂ leads to the formation of the thionitrosyl complexes [M^II(NS)Cl₄]^— (M = Re, Os) which could not be isolated as pure compounds. Addition of pyridine to the reaction mixture results in the formation of the stable compounds trans‐(Ph₄P)[Os^II(NS)Cl₄py], trans‐(Hpy)[Os^II(NS)Cl₄py], trans‐(Ph₄P)[Re^II(NS)Cl₄py], and cis‐(Ph₄P)[Re^II(NS)Cl₄py]. The crystal structure analyses show for trans‐(Ph₄P)[Os^II(NS)Cl₄py] (monoclinic, P2₁/n, a = 12.430(3)Å, b = 18.320(4)Å, c = 15.000(3)Å, β = 114.20(3)°, Z = 4), trans‐(Hpy)[Os^II(NS)Cl₄py] (monoclinic, P2₁/n, a = 7.689(1)Å, b = 10.202(2)Å, c = 20.485(5)Å, β = 92.878(4)°, Z = 4), trans‐(Ph₄P)[Re^II(NS)Cl₄py] (triclinic, P1¯, a = 9.331(5)Å, b = 12.068(5)Å, c = 15.411(5)Å, α = 105.25(1)°, β = 90.23(1)°, γ = 91.62(1)°, Z = 2), and cis‐(Ph₄P)[Re^II(NS)Cl₄py] (monoclinic, P2₁/c, a = 10.361(1)Å, b = 16.091(2)Å, c = 17.835(2)Å, β = 90.524(2)°, Z = 4) M‐N‐S angles in the range 168‐175°. This indicates a nearly linear coordination of the NS ligand. The metal atom is octahedrally coordinated in all cases. The rhenium(II) thionitrosyl complexes (5d⁵ “low‐spin” configuration, S = 1/2) are studied by EPR in the temperature range 295 > T > 130 K. In addition to the detection of the complexes formed during the reaction of [Re^VINCl₄]^— with S₂Cl₂ EPR investigations on diamagnetically diluted powders and single crystals of the system (Ph₄P)[Re^II/Os^II(NS)Cl₄py] are reported. The ^{185, 187}Re hyperfine parameters are used to get information about the spin‐density distribution of the unpaired electron in the complexes under study. [Tc^VINCl₄]^— reacts with S₂Cl₂ under formation of [Tc^II(NS)Cl₄]^— which is not stable and decomposes under S₈ elimination and rebuilding of [Tc^VINCl₄]^— as found by EPR monitoring of the reaction.     

Red‐ and Green‐Emitting Iridium(III) Complexes for a Dual Barometric and Temperature‐Sensitive Paint

A new dual luminescent sensitive paint for barometric pressure and temperature (T) is presented. The green‐emitting iridium(III) complex [Ir(ppy)₂(carbac)] (ppy=2‐phenylpyridine; carbac=1‐(9H‐carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐dione) was applied as a novel probe for T along with the red‐emitting complex [Ir(btpy)₃], (btpy=2‐(benzo[b]thiophene‐2‐yl)pyridine) which functions as a barometric (in fact oxygen‐sensitive) probe. Both iridium complexes were dissolved in different polymer materials to achieve optimal responses. The probe [Ir(ppy)₂(carbac)] was dispersed in gas‐blocking poly(acrylonitrile) microparticles in order to suppress any quenching of its luminescence by oxygen. The barometric probe [Ir(btpy)₃], in turn, was incorporated in a cellulose acetate butyrate film which exhibits good permeability for oxygen. The effects of temperature on the response of the oxygen probe can be corrected by simultaneous optical determination of T, as the poly(acrylonitrile) microparticles containing the temperature indicator are incorporated into the film. The phosphorescent signals of the probes for T and barometric pressure, respectively, can be separated by optical filters due to the ≈75 nm difference in their emission maxima. The dual sensor is applicable to luminescence lifetime imaging of T and barometric pressure. It is the first luminescent dual sensor material for barometric pressure/T based exclusively on the use of Ir^III complexes in combination with luminescence lifetime imaging.     

3D Luminescent Copper(I) Iodide Coordination Polymer Based on Cu4I4 Clusters and an Ethyl‐bridging Bis(triazole) Ligand

The copper‐iodine based coordination polymer [Cu₄I₂(bmte)]_n ( 1 ) [H₂bmte = 1,2‐bis(5‐methyl‐1H‐1,2,4‐triazol‐3‐yl)ethane] was synthesized using cuprous iodide and a flexible 3‐substituted, ethyl‐bridging bis(triazole) ligand under solvothermal conditions. X‐ray diffraction analysis reveals that compound 1 shows a 3D framework containing Cu₄I₄ clusters and alternating left‐ and right‐handed [Cu(triazole)] helices, which result in a (4,8)‐connected fluorite (flu) topological network. Moreover, compound 1 exhibits orange phosphorescence with the emission maxima at 590 nm in the solid state at room temperature.     

Ligand Substitution Reactions on Aquapentachloro‐ and Hexachloroplatinic Acid — Synthesis and Characterization of Tetrachloroplatinum(IV) Complexes with Heterocyclic N,N Donors

Reactions of aquapentachloroplatinic acid, (H₃O)[PtCl₅(H₂O)]·2(18C6)·6H₂O ( 1 ) (18C6 = 18‐crown‐6), and H₂[PtCl₆]·6H₂O ( 2 ) with heterocyclic N, N donors (2, 2′‐bipyridine, bpy; 4, 4′‐di‐tert‐butyl‐2, 2′‐bipyridine, tBu₂bpy; 1, 10‐phenanthroline, phen; 4, 7‐diphenyl‐1, 10‐phenanthroline, Ph₂phen; 2, 2′‐bipyrimidine, bpym) afforded with ligand substitution platinum(IV) complexes [PtCl₄(N∩N)] (N∩N = bpy, 3a ; tBu₂bpy, 3b ; Ph₂phen, 5 ; bpym, 7 ) and/or with protonation of N, N donor yielding (R₂phenH)₂[PtCl₆] (R = H, 4a ; Ph, 4b ) and (bpymH)⁺ ( 8 ). With UV irradiation Ph₂phen and bpym reacted with reduction yielding platinum(II) complexes [PtCl₂(N∩N)] (N∩N = Ph₂phen, 6 ; bpym, 9 ). Identities of all complexes were established by microanalysis as well as by NMR (¹H, ¹³C, ¹⁹⁵Pt) and IR spectroscopic investigations. Molecular structures of [PtCl₄(bpym)]·MeOH ( 7 ) and [PtCl₂(Ph₂phen)] ( 6 ) were determined by X‐ray diffraction analyses. Differences in reactivity of bpy/bpym and phen ligands are discussed in terms of calculated structures of complexes [PtCl₅(N∩N)]^— with monodentately bound N, N ligands (N∩N = bpy, 10a ; phen, 10b ; bpym, 10c ).     

Hydrogen bonding in C‐substituted nitroanilines: molecular ladders in 2‐trifluoromethyl‐4‐nitroaniline and sheets of R(12) and R(32) rings in 3‐trifluoromethyl‐4‐nitroaniline

In 2‐tri­fluoro­methyl‐4‐nitro­aniline, C₇H₅F₃N₂O₂, (I), the mol­ecules lie across a mirror plane in space group Pnma. The mol­ecules are linked by paired N—H?O hydrogen bonds to form a C(8)[R(6)] chain of rings, pairs of which are linked into a molecular ladder by a single C—H?O hydrogen bond. The isomeric 3‐tri­fluoro­methyl‐4‐nitro­aniline, (II), has Z′ = 2 in space group P2₁/c. Each mol­ecule is linked to four others by N—H?O hydrogen bonds to form sheets built from alternating R(12) and R(32) rings.     

Structural investigation of one‐ and two‐dimensional coordination polymers based on cobalt–bis(dioxolene) units and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane

The combination of cobalt, 3,5‐di‐tert‐butyldioxolene (3,5‐dbdiox) and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane (tpch) yields two coordination polymers with different connectivities, i.e. a one‐dimensional zigzag chain and a two‐dimensional sheet. Poly[[bis(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)bis(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)[μ₄‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]cobalt(III)]–ethanol–water 1/7/5], {[Co₂(C₁₄H₂₀O₂)₄(C₂₆H₂₄N₄O)]·7C₂H₅OH·5H₂O}_n or {[Co₂(3,5‐dbdiox)₄(tpch)}·7EtOH·5H₂O}_n, is the second structurally characterized example of a two‐dimensional coordination polymer based on linked {Co(3,5‐dbdiox)₂} units. Variable‐temperature single‐crystal X‐ray diffraction studies suggest that catena‐poly[[[(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)cobalt(III)]‐μ‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]–ethanol–water (1/1/5)], {[Co(C₁₄H₂₀O₂)₂(C₂₆H₂₄N₄O)]·C₂H₅OH·5H₂O}_n or {[Co(3,5‐dbdiox)₂(tpch)]·EtOH·5H₂O}_n, undergoes a temperature‐induced valence tautomeric interconversion.     

Synthesis and Characterization of Heteroleptic Ru(II) Complexes Based on 4,4′‐Bis((E)‐styryl)‐2,2′‐bipyridine as Ancillary Ligand and Application for Dye‐Sensitized Solar Cells

Heteroleptic Ru(II) complexes were designed based on 4,4′‐bis((E)‐styryl)‐2,2′‐bipyridine (bsbpy) as an ancillary ligand for dye‐sensitized solar cells (DSSCs), and those Ru(II) sensitizers, [Ru(L)(bsbpy)(NCS)₂][TBA] (TBA; tetrabutylammonium), were synthesized according to a typical one‐pot reaction of [RuCl₂(p‐cymene)]₂ with the corresponding anchoring ligands (where L = 4,4′‐dicarboxy‐2,2′‐bipyridine (dcbpy), 4,4′‐bis((E)‐carboxyvinyl)‐2,2′‐bipyridine (dcvbpy), 4,7‐dicarboxy‐1,10‐phenanthroline (dcphen), or 4,7‐bis((E)‐carboxyvinyl)‐1,10‐phenanthroline (dcvphen)). The new Ru(II) dyes, [Ru(L)(bsbpy)(NCS)₂][TBA] that incorporated vinyl spacer(s) into ancillary and/or anchoring ligand displayed red‐shifted bands over the overall UV/VIS region relative to the absorption spectra of N719 . A combination of bsbpy ancillary and dcphen anchoring ligand showed the best result for the overall power conversion efficiency (η); i.e., a DSSC fabricated with [Ru(dcphen)(bsbpy)(NCS)₂][TBA] exhibited a power conversion efficiency (η) of 2.98% (compare to N719 , 4.82%).     

Synthesis,Structural Characterization and Luminescence Studies of Di‐ and Trinuclear Gold(I) Alkynyl‐phosphine Complexes

Reactions of the polymer {Au^IC₂Ph}_n with polyphosphine ligands [1,4‐bis(2‐diphenylphosphino‐1H‐imidazol‐1‐yl)‐benzene (dpib), 1,3,5‐tris(4‐diphenylphosphinophenyl)benzene (tppb), 2,2′‐bis(diphenylphosphanyl)‐4,4′‐bipyridine (dpbp), and 3,6‐bis(diphenylphosphanyl)pyridazine (dppz)] afforded four gold(I) alkynyl‐polyphosphine complexes [{AuC₂Ph}₂(μ‐dpib)] ( 1 ), [{AuC₂Ph}₃(μ₃‐tppb)] ( 2 ), [{AuC₂Ph}₂(μ‐dpbp)] ( 3 ), and [{AuC₂Ph}₂(μ‐dppz)] ( 4 ) in nearly quantitative yield. The compounds obtained were characterized using elemental analysis, ESI‐MS, X‐ray crystallography, and polynuclear NMR spectroscopy. Intermolecular aurophilic interaction together with π–π and σ–π stacking build up the supramolecular 3D network of complex 3 , whereas none of these intermolecular bondings were found in the crystal structures of compounds 1 , 2 , and 4 . Complexes 1 – 4 are luminescent both in solution (CH₂Cl₂) and in solid state under laser irradiation (λ_ex = 308 nm). In solution, the diphosphine complexes 1 – 4 display dual emission corresponding to ligand centered transitions (λ_em = 360–375 nm) along with weaker contribution from MLCT excited states at ca. 490 nm. The long wavelength component of the emission plays a dominant role in the solid state luminescence spectra of complexes 1 , 3 , and 4 (460, 544, 520 nm, respectively) whereas the triphosphine complex 2 shows dual luminescence (372 and 520 nm) with considerable contribution from ligand centered excited state.     

Formation,Dynamic Behavior,and Chemical Transformation of Pt Complexes with a Rotaxane‐like Structure

The reaction of [Pt(CH₂COMe)(Ph)(cod)] (cod=1,5‐cyclooctadiene) with (ArCH₂NH₂CH₂‐C₆H₄COOH)⁺(PF₆)^? (Ar=4‐tBuC₆H₄ or 9‐anthryl) in the presence of cyclic oligoethers such as dibenzo[24]crown‐8 (DB24C8) and dicyclohexano[24]crown‐8 (DC24C8) produces {(ce)[ArCH₂NH₂CH₂C₆H₄COOPt(Ph)(cod)]}⁺(PF₆)^? (ce=DB24C8 or DC24C8, Ar=4‐tBuC₆H₄ or 9‐anthryl) with interlocked structures. FABMS and NMR spectra of a solution of these compounds indicate that the Pt complexes with a secondary ammonium group and DB24C8 (or DC24C8) make up the axis and cyclic components, respectively. Temperature‐dependent ¹H NMR spectra of a solution of {(DB24C8)[4‐tBuC₆H₄CH₂NH₂CH₂‐C₆H₄COOPt(Ph)(cod)]}⁺(PF₆)^? ({(DB24C8)[ 4 ‐H]}⁺(PF₆)^?) show equilibration with free DB24C8 and the axis component. The addition of DB24C8 to a solution of {(DC24C8)[ 4 ‐H]}⁺(PF₆)^? causes partial exchange of the macrocyclic component of the interlocked molecules, giving a mixture of {(DC24C8)[ 4 ‐H]}⁺(PF₆)^?, {(DB24C8)[ 4 ‐H]}⁺(PF₆)^?, and free macrocyclic compounds. The reaction of 3,5‐Me₂C₆H₃COCl with {(DB24C8)[ 4 ‐H]}⁺(PF₆)^? affords the organic rotaxane {(DB24C8)(4‐tBuC₆H₄CH₂NH₂CH₂‐C₆H₄COOCOC₆H₃Me₂‐3,5)}⁺(PF₆)^? through C? O bond formation between the aroyl group and the carboxylate ligand of the axis component. The addition of 2,2′‐bipyridine (bpy) to a solution of {(DB24C8)[ 4 ‐H]}⁺(PF₆)^? induces the degradation of the interlocked structure to form a complex with trigonal bipyramidal coordination, [Pt(Ph)(bpy)(cod)]⁺(PF₆)^?, whereas the reaction of bpy with [Pt(OCOC₆H₄Me‐4)(Ph)(cod)] produces the square‐planar complex [Pt(OCOC₆H₄Me‐4)(Ph)(bpy)].     

Salts of two pentahalo(N‐donor)­bismuthate(III) anions: [BiX5L]2− (X = Cl,Br; L = pyridine, 4‐picoline)

Two pentahalo(N‐donor)­bismuthate(III) salts, bis­[hydrogen bis(4‐picoline)(1+)] penta­bromo(4‐picoline‐N)bismuthate(III), (C₁₂H₁₅N₂)₂[BiBr₅(C₆H₇N)], (I), and bis­(pyridinium) penta­chloro­(pyridine‐N)­bismuthate(III), (C₅H₆N)₂[BiCl₅(C₅H₅N)], (II), are described which show modest deviations from octahedral geometry at bismuth. In (I), the cations comprise two 4‐picoline mol­ecules sharing a proton and in (II), pyridinium cations are present. The anion in (I) has twofold and that in (II) has mirror crystallographic symmetry. Both structures show a layered packing formed by the anions with the cations between the layers. Ring–ring interactions seem important in (I), whilst in (II), N/­C—H?Cl—Bi hydrogen bonding is abundant.     

Syntheses,Structures, and Photoluminescence of Lanthanide Coordination Polymers Based on 4‐Oxo‐1,4‐dihydro‐2,6‐pyridinedicarboxylic acid

Investigating the coordination chemistry of H₂CDA (4‐oxo‐1,4‐dihydro‐2,6‐pyridinedicarboxylic acid) with rare earth salts Ln(NO₃)₃ under hydrothermal conditions, structure transformation phenomenon was observed. The ligand, H₂CDA charged to its position isomer, enol type structure, H₃CAM (4‐hydroxypyridine‐2,6‐dicarboxylic acid). Six new lanthanide(III) coordination polymers with the formulas [Ln(CAM)(H₂O)₃]_n [Ln = La ( 1 ), Pr, ( 2 )] and {[Ln(CAM)(H₂O)₃] · H₂O}_n [Ln = Nd, ( 3 ), Sm, ( 4 ), Eu, ( 5 ), Y, ( 6 )] were synthesized and characterized. The X‐ray structure analyses show two kinds of coordination structures. The complexes 1 and 2 and 3 – 6 are isostructural. Complexes 1 and 2 crystallize in the monoclinic C₂/c space group, whereas 3 – 6 crystallize in the monoclinic system with space group P2₁/n. In the two kinds of structures, H₃CAM displays two different coordination modes. The Sm^III and Eu^III complexes exhibit the corresponding characteristic luminescence in the visible region at an excitation of 376 nm.