High Catalytic Activity of Heteropolynuclear Cyanide Complexes Containing Cobalt and Platinum Ions: Visible‐Light Driven Water Oxidation

A near‐stoichiometric amount of O₂ was evolved as observed in the visible‐light irradiation of an aqueous buffer (pH 8) containing [Ru^II(2,2′‐bipyridine)₃] as a photosensitizer, Na₂S₂O₈ as a sacrificial electron acceptor, and a heteropolynuclear cyanide complex as a water‐oxidation catalyst. The heteropolynuclear cyanide complexes exhibited higher catalytic activity than a polynuclear cyanide complex containing only Co^III or Pt^IV ions as C‐bound metal ions. The origin of the synergistic effect between Co and Pt ions is discussed in relation to electronic and local atomic structures of the complexes.     

Intercalation of Highly Dispersed Metal Nanoclusters into a Layered Metal Oxide for Photocatalytic Overall Water Splitting

Metal nanoclusters (involving metals such as platinum) with a diameter smaller than 1 nm were deposited on the interlayer nanospace of KCa₂Nb₃O₁₀ using the electrostatic attraction between a cationic metal complex (e.g., [Pt(NH₃)₄]Cl₂) and a negatively charged two‐dimensional Ca₂Nb₃O₁₀^? sheet, without the aid of any additional reagent. The material obtained possessed eight‐fold greater photocatalytic activity for water splitting into H₂ and O₂ under band‐gap irradiation than the previously reported analog using a RuO₂ promoter. This study highlighted the superior functionality of Pt nanoclusters with diameters smaller than 1 nm for photocatalytic overall water splitting. This material shows the greatest efficiency among nanosheet‐based photocatalysts reported to date.     

Facile Synthesis of Thermal‐ and Photostable Titania with Paramagnetic Oxygen Vacancies for Visible‐Light Photocatalysis

A novel dopant‐free TiO₂ photocatalyst (V_o^.‐TiO₂), which is self‐modified by a large number of paramagnetic (single‐electron‐trapped) oxygen vacancies, was prepared by calcining a mixture of a porous amorphous TiO₂ precursor, imidazole, and hydrochloric acid at elevated temperature (450 °C) in air. Control experiments demonstrate that the porous TiO₂ precursor, imidazole, and hydrochloric acid are all necessary for the formation of V_o^.‐TiO₂. Although the synthesis of V_o^.‐TiO₂ originates from such a multicomponent system, this synthetic approach is facile, controllable, and reproducible. X‐ray diffraction, XPS, and EPR spectroscopy reveal that the V_o^.‐TiO₂ material with a high crystallinity embodies a mass of paramagnetic oxygen vacancies, and is free of other dopant species such as nitrogen and carbon. UV/Vis diffuse‐reflectance spectroscopy and photoelectrochemical measurement demonstrate that V_o^.‐TiO₂ is a stable visible‐light‐responsive material with photogenerated charge separation efficiency higher than N‐TiO₂ and P25 under visible‐light irradiation. The V_o^.‐TiO₂ material exhibits not only satisfactory thermal‐ and photostability, but also superior photocatalytic activity for H₂ evolution (115 μmol h^?1 g^?1) from water with methanol as sacrificial reagent under visible light (λ>400 nm) irradiation. Furthermore, the effects of reaction temperature, ratio of starting materials (imidazole:TiO₂ precursor) and calcination time on the photocatalytic activity and the microstructure of V_o^.‐TiO₂ were elucidated.     

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe₂O₃ on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO₂ as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe₂O₃|−carbazole|TiO₂|−Ru(carbene) , demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe₂O₃ to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.     

Visible‐Light‐Active Elemental Photocatalysts

Seeking visible‐light‐active photocatalysts for efficient solar‐energy conversion has become an intensifying endeavor worldwide. In this concept paper, general requirements for finding new visible‐light‐active photocatalysts are briefly introduced, and recent progress in exploring elemental photocatalysts for clean‐energy generation and environmental remediation are reviewed. Finally, opportunities and challenges facing elemental photocatalysts are discussed.     

Visible‐Light‐Driven Water Oxidation by a Molecular Manganese Vanadium Oxide Cluster

Photosynthetic water oxidation in plants occurs at an inorganic calcium manganese oxo cluster, which is known as the oxygen evolving complex (OEC), in photosystem II. Herein, we report a synthetic OEC model based on a molecular manganese vanadium oxide cluster, [Mn₄V₄O₁₇(OAc)₃]^3?. The compound is based on a [Mn₄O₄]⁶⁺ cubane core, which catalyzes the homogeneous, visible‐light‐driven oxidation of water to molecular oxygen and is stabilized by a tripodal [V₄O₁₃]^6? polyoxovanadate and three acetate ligands. When combined with the photosensitizer [Ru(bpy)₃]²⁺ and the oxidant persulfate, visible‐light‐driven water oxidation with turnover numbers of approximately 1150 and turnover frequencies of about 1.75 s^?1 is observed. Electrochemical, mass‐spectrometric, and spectroscopic studies provide insight into the cluster stability and reactivity. This compound could serve as a model for the molecular structure and reactivity of the OEC and for heterogeneous metal oxide water‐oxidation catalysts.     

Perovskite Oxide Nanosheets with Tunable Band‐Edge Potentials and High Photocatalytic Hydrogen‐Evolution Activity

Perovskite nanosheets of HCa_2?xSr_xNb₃O₁₀ and HCa₂Nb_3?yTa_yO₁₀ with controlled band‐edge potentials were prepared. They worked as highly efficient heterogeneous photocatalysts for H₂ evolution from a water/methanol mixture under band‐gap irradiation. The activity was found to depend on the composition. The highest activity was obtained with HCa₂Nb₂TaO₁₀ nanosheets, recording an apparent quantum yield of approximately 80 % at 300 nm, which is the highest value for a nanosheet‐based photocatalyst reported to date.     

HIPE Polymerization Materials Functionalized with Iodic‐BODIPY on the Surface as Porous Heterogeneous Visible‐Light Photocatalysts

A high internal phase emulsion polymerization (PolyHIPE) material, with iodine‐functionalized boron‐dipyrromethene (iodic‐BODIPY) immobilized on its surface, composes a porous heterogeneous organic photocatalyst (iodic‐BODIPY‐PolyHIPE). It shows high catalytic efficiency on the selective oxidation reaction of aromatic sulfides under visible light. The substrates were almost fully converted to their corresponding sulfoxides and no sulfones were observed. Most importantly, iodic‐BODIPY‐PolyHIPE shows >1.6‐fold reaction rate compared to the previous non‐inorganic heterogeneous photocatalysts.     

Single‐Crystal Semiconductors with Narrow Band Gaps for Solar Water Splitting

Solar water splitting provides a clean and renewable approach to produce hydrogen energy. In recent years, single‐crystal semiconductors such as Si and InP with narrow band gaps have demonstrated excellent performance to drive the half reactions of water splitting through visible light due to their suitable band gaps and low bulk recombination. This Minireview describes recent research advances that successfully overcome the primary obstacles in using these semiconductors as photoelectrodes, including photocorrosion, sluggish reaction kinetics, low photovoltage, and unfavorable planar substrate surface. Surface modification strategies, such as surface protection, cocatalyst loading, surface energetics tuning, and surface texturization are highlighted as the solutions.     

Visible‐Light‐Induced Water Oxidation Mediated by a Mononuclear‐Cobalt(II)‐Substituted Silicotungstate

A mononuclear‐cobalt(II)‐substituted silicotungstate, K₁₀[Co(H₂O)₂(γ‐SiW₁₀O₃₅)₂] ? 23 H₂O (POM‐ 1 ), has been evaluated as a light‐driven water‐oxidation catalyst. With in situ photogenerated [Ru(bpy)₃]³⁺ (bpy=2,2′‐bipyridine) as the oxidant, quite high catalytic turnover number (TON; 313), turnover frequency (TOF; 3.2 s^?1), and quantum yield (Φ_QY; 27 %) for oxygen evolution at pH 9.0 were acquired. Comparison experiments with its structural analogues, namely [Ni(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 2 ) and [Mn(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 3 ), gave the conclusion that the cobalt center in POM‐ 1 is the active site. The hydrolytic stability of the title polyoxometalate (POM) was confirmed by extensive experiments, including UV/Vis spectroscopy, linear sweep voltammetry (LSV), and cathodic adsorption stripping analysis (CASA). As the [Ru(bpy)₃]²⁺/visible light/sodium persulfate system was introduced, a POM–photosensitizer complex formed within minutes before visible‐light irradiation. It was demonstrated that this complex functioned as the active species, which remained intact after the oxygen‐evolution reaction. Multiple experimental parameters were investigated and the catalytic activity was also compared with the well‐studied POM‐based water‐oxidation catalysts (i.e., [Co₄(H₂O)₂(α‐PW₉O₃₄)₂]^10? (Co₄‐POM) and [Co^IIICo^II(H₂O)W₁₁O₃₉]^7? (Co₂‐POM)) under optimum conditions.     

Cobalt Phthalocyanine Immobilized on Graphene Oxide: An Efficient Visible‐Active Catalyst for the Photoreduction of Carbon Dioxide

New graphene oxide (GO)‐tethered–Co^II phthalocyanine complex [CoPc–GO] was synthesized by a stepwise procedure and demonstrated to be an efficient, cost‐effective and recyclable photocatalyst for the reduction of carbon dioxide to produce methanol as the main product. The developed GO‐immobilized CoPc was characterized by X‐ray diffraction (XRD), FTIR, XPS, Raman, diffusion reflection UV/Vis spectroscopy, inductively coupled plasma atomic emission spectroscopy (ICP‐AES), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). FTIR, XPS, Raman, UV/Vis and ICP‐AES along with elemental analysis data showed that Co^II–Pc complex was successfully grafted on GO. The prepared catalyst was used for the photocatalytic reduction of carbon dioxide by using water as a solvent and triethylamine as the sacrificial donor. Methanol was obtained as the major reaction product along with the formation of minor amount of CO (0.82 %). It was found that GO‐grafted CoPc exhibited higher photocatalytic activity than homogeneous CoPc, as well as GO, and showed good recoverability without significant leaching during the reaction. Quantitative determination of methanol was done by GC flame‐ionization detector (FID), and verification of product was done by NMR spectroscopy. The yield of methanol after 48 h of reaction by using GO–CoPc catalyst in the presence of sacrificial donor triethylamine was found to be 3781.8881 μmol g^?1 cat., and the conversion rate was found to be 78.7893 μmol g^?1cat. h^?1. After the photoreduction experiment, the catalyst was easily recovered by filtration and reused for the subsequent recycling experiment without significant change in the catalytic efficiency.     

含苯并噻二唑结构单元的金属有机骨架在可见光催化需氧氧化反应中的应用

设计合成了一个含有苯并噻二唑结构单元的对三联苯二羧酸配体H₂1,将其与二甲基修饰的对三联苯二羧酸配体H₂2以物质的量比1：1在N,N-二甲基甲酰胺溶剂中混合后;在醋酸存在条件下,与ZrCl₄发生溶剂热反应而得到金属有机骨架UiO-68-S.X射线粉末衍射表明该金属有机骨架具有UiO-68类型的框架结构;77 K温度下,氮气吸附等温曲线表明其具有较高的孔隙和比表面.在空气气氛和蓝光LED的照射下,金属有机骨架UiO-68-S可作为硫醚选择性氧化以及芳香硼酸羟基化的非均相光催化剂.     

Improving Singlet Oxygen Resistance during Photochemical Water Oxidation by Cobalt Porphyrin Catalysts

Enabling the production of solar fuels on a global scale through artificial photosynthesis requires the development of water oxidation catalysts with significantly improved stability. The stability of photosystems is often reduced owing to attack by singlet oxygen, which is produced during light harvesting. Here, we report photochemical water oxidation by CoFPS , a fluorinated Co‐porphyrin designed to resist attack by singlet oxygen. CoFPS exhibits significantly improved stability relative to its non‐fluorinated analogue, as shown by a large increase in turnover numbers. This increased stability results from resistance of CoFPS to attack by singlet oxygen, the formation of which was monitored in situ by using 9,10‐diphenylanthracene as a chemical probe. Dynamic light scattering (DLS) confirms that CoFPS remains homogeneous, proving its stability during water oxidation catalysis.