Bi2O3 Nanoparticle Clusters: Reversible Agglomeration Revealed by Imaging and Nano‐Impact Experiments

Colloidal suspensions of Bi₂O₃ nanoparticles were studied in aqueous solution using imaging and electrochemical techniques. Nanoparticle tracking analysis revealed the particles to be agglomerated. In contrast, electrochemical detection via the nano‐impacts technique showed almost exclusive detection of monomeric nanoparticles. Comparison of the two techniques allows the conclusion to be drawn that the agglomeration/deagglomeration of the nanoparticles is reversible. A minimum rate constant for the deagglomeration process was estimated.     

Investigation of Single‐Drug‐Encapsulating Liposomes using the Nano‐Impact Method

Encapsulating liposomes are widely used for controlled drug delivery. We report the use of nano‐impact experiments for the electrochemical attomolar quantification of the liposome load, uniquely at the single liposome level, using vitamin C encapsulated liposomes as a model. The size of the liposomes and their picomolar concentration are also determined in biological buffer in real time.     

The Aspect Ratio and Gas Permeation in Polymer‐Layered Silicate Nanocomposites

Summary: Organophilized montmorillonite‐epoxy and ‐polyurethane nanocomposites, useful for packaging applications, were prepared and their oxygen permeability was measured. The composite morphology was mixed, exfoliated and intercalated, as shown by wide‐angle X‐ray diffraction (WAXRD) and transmission electron microscopy (TEM). The gas‐barrier performance of the polyurethane composites was better than that of the epoxy composites due to more exfoliation. The average aspect ratio of the montmorillonite platelets in the nanocomposites could be estimated from the reduction in permeability by a numerical finite element approach.

A computer model comprising 50 randomly distributed and oriented round platelets with an aspect ratio of 50 at 3 vol.‐% loading, periodic boundary conditions applied.     

Unravelling the Correlation between the Aspect Ratio of Nanotubular Structures and Their Electrochemical Performance To Achieve High‐Rate and Long‐Life Lithium‐Ion Batteries

The fundamental understanding of the relationship between the nanostructure of an electrode and its electrochemical performance is crucial for achieving high‐performance lithium‐ion batteries (LIBs). In this work, the relationship between the nanotubular aspect ratio and electrochemical performance of LIBs is elucidated for the first time. The stirring hydrothermal method was used to control the aspect ratio of viscous titanate nanotubes, which were used to fabricate additive‐free TiO₂‐based electrode materials. We found that the battery performance at high charging/discharging rates is dramatically boosted when the aspect ratio is increased, due to the optimization of electronic/ionic transport properties within the electrode materials. The proof‐of‐concept LIBs comprising nanotubes with an aspect ratio of 265 can retain more than 86 % of their initial capacity over 6000 cycles at a high rate of 30 C. Such devices with supercapacitor‐like rate performance and battery‐like capacity herald a new paradigm for energy storage systems.     

Aspect ratio dependent air stability of PbSe nanorods and photovoltaic applications

Development of unique strategies to overcome Shockley–Queisser (SQ) limit in solar cells has gained a great deal of interest. Multiple exciton generation (MEG) process has been considered as one of the best approaches to the SQ limitation. In this respect, PbSe quantum dots (QDs) and nanorods (NRs) have been regarded as promising solar energy harvesting materials owing to their noticeable MEG yields. Although air stability has been regarded as one of the main disadvantage of PbSe QDs, no study has pointed out to the air sensitivity of PbSe NRs yet. Here, we reveal the effect of aspect ratio on air sensitivity and optical properties of PbSe NRs and discover that NRs with higher aspect ratios are more air stable, attributed to the reduced density of NR ends with air sensitive {100} facets. Furthermore, a band offset was created by utilization of tetrabutylammonium iodide and 1,2-ethanedithiol ligands in cell designs. We found that solar cells based on pristine PbSe NRs are limited by low open circuit voltages due to leakage current pathways. On the other hand, modified cells comprising light absorbing layers prepared by blending NRs and QDs and hole transporting QD layer exhibit a 10-fold improvement in solar cell efficiency.     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Electrochemical Performance of Graphitic Multi-walled Carbon Nanotubes with Different Aspect Ratios as Cathode Materials for Aluminum-ion Batteries

Graphitic multi-walled carbon nanotubes (MWCNTs) can function as high-performance cathode materials for rechargeable Al-ion batteries with well-defined discharging plateaus and reasonable charge/discharge C-rates. However, the main intercalation/deintercalation or adsorption/desorption path of AlCl₄⁻ anions into or onto G-MWCNTs has not been elucidated. Herein, we used battery cells comprised of G-MWCNTs with different aspect ratios, Al metal, and AlCl₃/1-ethyl-3-methylimidazolium chloride ionic liquid as the cathode, anode, and electrolyte, respectively. The electrochemical performance of the Al||G-MWCNT cell increased as the aspect ratio of the G-MWCNT cathode increased (i. e., longer and thinner). The degree of defects of the G-MWCNTs was similar (0.15–0.22); hence, the results confirm that the main and alternate paths for the AlCl₄⁻ intercalation/de-intercalation or adsorption/desorption into/from or onto/from the G-MWCNT are the basal and edge planes, respectively. The step-like structures of defects on the basal plane provide the main reaction site for AlCl₄⁻ anions.     

One‐Pot Hydrothermal Synthesis of Heterostructured ZnO/ZnS Nanorod Arrays with High Ethanol‐Sensing Properties

ZnO/ZnS heterostructured nanorod arrays with uniform diameter and length were synthesized from zinc substrates in a one‐pot procedure by using a simple hydrothermal method. Structural characterization by HRTEM indicated that the heterostructured nanorods were composed of parallel segments of wurtzite‐type ZnO and zinc‐blende ZnS, with a distinct interface along the axial direction, which revealed the epitaxial relationship, ZnO (10$\bar 1$ 0) and ZnS ($\bar 1$ 1$\bar 1$ ). The as‐prepared ZnO/ZnS nanorods showed only two green emissions at around 523 nm and 576 nm. We also found that the nanorods exhibited high sensitivity to ethanol at relatively low temperatures, owing to their smaller size and structure.     

Wet‐Chemical Synthesis of Phase‐Pure FeOF Nanorods as High‐Capacity Cathodes for Sodium‐Ion Batteries

It is challenging to prepare phase‐pure FeOF by wet‐chemical methods. Furthermore, nanostructured FeOF has never been reported. In this study, hierarchical FeOF nanorods were synthesized through a facile, one‐step, wet‐chemical method by the use of just FeF₃?3H₂O and an alcohol. It was possible to significantly control the FeOF nanostructure by the selection of alcohols with an appropriate molecular structure. A mechanism for the formation of the nanorods is proposed. An impressive high specific capacity of approximately 250 mAh g^?1 and excellent cycling and rate performances were demonstrated for sodium storage. The hierarchical FeOF nanorods are promising high‐capacity cathodes for SIBs.     

Nanosecond Time‐Resolution Study of Gold Nanorod Rotation at the Liquid–Solid Interface

Early studies showed that the adsorption of nanorods may start from a special “anchored” state, in which the nanorods lose translational motion but retain rotational freedom. Insight into how the anchored nanorods rotate should provide additional dimensions for understanding particle–surface interactions. Based on conventional time‐resolution studies, gold nanorods are thought to continuously rotate following initial interactions with negatively charged glass surfaces. However, this nanosecond time‐resolution study reveals that the apparent continuous rotation actually consists of numerous fast, intermittent rotations or transitions between a small number of weakly immobilized states, with the particle resting in the immobilized states most of the time. The actual rotation from one immobilized state to the other happens on a 1 ms timescale, that is, approximately 50 times slower than in the bulk solution.     

Enhanced Electrochemical Capacitive Properties of Nickel‐Cobalt Oxide Nano‐flakes Materials

Nickel‐cobalt oxide nano‐flakes materials are successfully synthesized by a facile chemical co‐precipitation method followed by a simple calcination process. The studies show that the as‐prepared nickel‐cobalt oxides with different Ni/Co ratio are composed of NiO and Co₃O₄ compounds. The Co_0.56Ni_0.44 oxide material, which exhibits a mesoporous structure with a narrow distribution of pore size from 2 to 7 nm, possesses markedly enhanced charge‐discharge properties at high current density compared with the pure NiO and pure Co₃O₄. The Co_0.56Ni_0.44 oxide electrode shows a specific capacitance value of 1227 F/g at 5 mA/cm², which is nearly three times greater than that of the pure NiO electrode at the same current density.     

Hollow PtPd Nanorods with Mesoporous Shells as an Efficient Electrocatalyst for the Methanol‐Oxidation Reaction

Tailoring the morphology and composition of platinum‐based electrocatalysts is of significant importance for the development of highly efficient direct methanol fuel cells. Herein, we report a dual‐templating method for the design of hollow PtPd nanorods with mesoporous shells (mPtPd HNRs). We found that F127 micelles favored the formation of mesoporous structures and that SiO₂ nanorods served as a hard template for the creation of cavities. The well‐developed mesopores, hollow structures, and bimetallic composition of the mPtPd HNRs afforded a sufficient number of active sites to facilitate the electrochemical oxidation of methanol, thereby leading to enhanced activity and stability. This strategy allowed for the reliable preparation of mesoporous hollow platinum‐based electrocatalysts with desired compositions and morphologies for catalytic applications.     

Preparation and Characterization of Carbon Nano‐Onion/PEDOT:PSS Composites

Composites of unmodified or oxidized carbon nano‐onions (CNOs/ox‐CNOs) with poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are prepared with different compositions. By varying the ratio of PEDOT:PSS relative to CNOs, CNO/PEDOT:PSS composites with various PEDOT:PSS loadings are obtained and the corresponding film properties are studied as a function of the polymer. X‐ray photoelectron spectroscopy characterization is performed for pristine and ox‐CNO samples. The composites are characterized by scanning and transmission electron microscopy and differential scanning calorimetry studies. The electrochemical properties of the nanocomposites are determined and compared. Doping the composites with carbon nanostructures significantly increases their mechanical and electrochemical stabilities. A comparison of the results shows that CNOs dispersed in the polymer matrices increase the capacitance of the CNO/PEDOT:PSS and ox‐CNO/PEDOT:PSS composites.