Highly Fluorescent Conjugated Copolymers Containing Dithieno[3,2‐b:2′,3′‐d]pyrrole

Three copolymers that incorporate dithieno[3,2‐b:2′,3′‐d]pyrrole with fluorene, carbazole, or pyridine have been prepared by Suzuki reaction and characterized by NMR spectroscopy and GPC. A new homopolymer of dithieno[3,2‐b:2′,3′‐d]pyrrole was also synthesized for the comparison of their structure–property relationships. Their thermal, optical, and electrochemical properties have been investigated. All the polymers exhibit good thermal stability with decomposition temperatures around 400 °C. The fluorescence quantum efficiencies of all these polymers in solution are in the range of 33.5–55.5%. The copolymers also show high film fluorescence quantum efficiencies of about 20% while the fluorescence of the homopolymer film is almost quenched.

     

Novel Conjugated Polymers Based on Dithieno[3,2‐b:6,7‐b]carbazole for Solution Processed Thin‐Film Transistors

Two conjugated polymers (CPs) P‐tCzC12 and P‐tCzC16 comprising alternating dithieno[3,2‐b:6,7‐b]carbazole and 4,4′‐dihexadecyl‐2,2′‐bithiophene units have been designed and synthesized. Upon thermal annealing, they can form ordered thin films in which the polymer backbones dominantly adopted an edge‐on orientation respective to the substrate with a lamellar spacing of ≈24 Å and a π‐stacking distance of ≈3.7 Å. Organic thin‐film transistors (OTFTs) were fabricated by solution casting. A hole mobility of 0.39 cm² V⁻¹s⁻¹ has been demonstrated with P‐tCzC16. This value is the highest among the CPs containing heteroacenes larger than 4 rings.     

New copolymers with thieno[3,2‐b]thiophene or dithieno[3,2‐b:2′,3′‐d]thiophene units possessing electron‐withdrawing 4‐cyanophenyl groups: Synthesis and photophysical,electrochemical, and electroluminescent properties

New monomers containing 4‐cyanophenyl (–PhCN) groups attached to a thieno[3,2‐b]thiophene (TT) or dithieno[3,2‐b:2′,3′‐d]thiophene (DTT) structure were synthesized and characterized as 4‐(2,5‐dibromothieno[3,2‐b]thiophen‐3‐yl)benzonitrile (Br–TT–PhCN) or 4,4′‐(2,6‐dibromodithieno[3,2‐b:2′,3′‐d]thiophene‐3,5‐diyl)dibenzonitrile (Br–DTT–PhCN). The Suzuki coupling of 9,9‐dioctylfluorene‐2,7‐diboronic acid bis(1,3‐propanediol)ester and the Br–TT–PhCN or Br–DTT–PhCN monomer was utilized for the syntheses of novel copolymers poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3‐(4′‐cyanophenyl)thieno[3,2‐b]thiophene‐2,5‐diyl} (PFTT–PhCN) and poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3,5‐bis(4′‐cyanophenyl)dithieno[3,2‐b:2′,3′‐d]thiophene‐2,6‐diyl} (PFDTT–PhCN), respectively. The photophysical, electrochemical, and electroluminescent (EL) properties of these novel copolymers were studied. Their photoluminescence (PL) exhibited the same emission maximum for both copolymers in solution. Red‐shifted PL emissions were observed in the thin films. The PL emission maximum of PFTT–PhCN was more significantly redshifted than that of PFDTT–PhCN, indicating more pronounced excimer or aggregate formation in PFTT–PhCN. The ionization potential (HOMO level) and electron affinity (LUMO level) values were 5.54 and 2.81 eV, respectively, for PFTT–PhCN and were 5.57 and 2.92 eV, respectively, for PFDTT–PhCN. Polymer light‐emitting diodes (LEDs) with copolymer active layers were fabricated and studied. Anomalous behavior and memory effects were observed from the current–voltage characteristics of the LEDs for both copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2629–2638     

Synthesis and photovoltaic properties of thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole‐containing conjugated polymers

Novel conjugated polymers composed of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole units are synthesized by Stille polycondensation. The resulting polymers display a longer wavelength absorption and well‐defined redox activities. The effective intramolecular charge‐transfer and energy levels of all polymers are elucidated by computational calculations. Bulk‐heterojunction solar cells based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) as an n‐type semiconductor are fabricated, and their photovoltaic performances are for the first time evaluated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1067–1075     

Synthesis and Chain‐Length Dependence of the Electronic Properties of π‐Conjugated Dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) Oligomers

N‐(2‐ethylhexyl)dithieno[3,2‐b:2′,3′‐d]pyrrole has been prepared and its dimer and trimer have been synthesized by Stille coupling. The electrochemical and optical properties of these compounds have been investigated by cyclic voltammetry, UV–Vis, and fluorescence emission spectroscopies. The obtained results show that these strongly luminescent compounds can be oxidized into stable cation radical and dication state. The analysis of the chain length dependence of the electronic properties indicates that the predicted bandgap of an ideal polymer chain should be considerably smaller than the experimental results reported until now. This difference is discussed in terms of reactivity of the dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) unit.

     

Dendrimeric Oligo(phenylenevinylene)‐Extended Dithieno[3,2‐b:2′,3′‐d]phospholes—Synthesis,Self‐Organization,and Optical Properties

A boost from the branches : Incorporation of the dithieno[3,2‐b:2′,3′‐d]phosphole system as a core in oligo(phenylenevinylene) dendrimers (an example is shown here) provides materials that exhibit energy‐transfer features relaying incoming photons from the dendrons towards the core, which in turn shows enhanced emission intensity. The optical properties and self‐assembly features of the dendrimers can be impacted by the terminal groups (‐H, ‐CF₃, or ‐NPh₂) employed.

     

Synthesis,characterization, and organic field‐effect transistors study of conjugated D–A copolymers based on dialkylated naphtho[1,2‐b:5,6‐b′]dithiophene/naphtho[1,2‐b:5,6‐b′]difuran and benzodiathiazole/benzoxadiazole

In this report, four donor–acceptor copolymers, P(NDT3‐BT), P(NDT3‐BO), P(NDF3‐BT), and P(NDF3‐BO), using 5,10‐didodecyl‐naphtho[1,2‐b:5,6‐b′]dithiophene (NDT3) or 5,10‐didodecyl‐naphtho[1,2‐b:5,6‐b′]difuran (NDF3) as an electron‐rich unit and benzodiathiazole (BT) or benzoxadiazole (BO) as an electron‐deficient one, were designed, synthesized, and characterized. Detailed systematical investigation was developed for studying the effect of the S/O atoms on the optical, electrochemical, and morphological properties of the polymers, as well as the subsequent performance of the organic field‐effect transistors (OFETs) fabricated from these copolymers. It was found that, compared with NDF3‐based P(NDF3‐BT)/P(NDF3‐BO), by replacing NDF3 with stronger aromatic NDT3, the resultant P(NDT3‐BT)/P(NDT3‐BO) show smaller lamellar distance with an increased surface roughness in solid state, and relatively higher hole mobilities are obtained. The hole mobilities of the four polymers based on OFETs varied from 0.20 to 0.32 cm² V^?1 s^?1 depending on their molecular structures, giving some valuable insights for the further design and development of a new generation of semiconducting materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2465–2476     

Nonsymmetrical Dithienylethenes Bearing Dithieno[3,2‐b:2′,3′‐d]thiophene Units with Photochromic Performance in the Crystalline Phase

Four novel nonsymmetrical photochromic diarylethene compounds containing dithieno[3,2‐b:2′,3′‐d]thiophene units were designed and synthesized to investigate their photochromic properties. All these molecules adopt a photoactive antiparallel conformation in single crystals, as revealed by X‐ray crystallographic analysis, and exhibit excellent photochromism in solution as well as in the crystalline phase.     

Design and synthesis of dithieno[3,2‐b:2′3′‐d]pyrrole‐based conjugated polymers for photovoltaic applications: consensus between low bandgap and low HOMO energy level

A strategy of the fine‐tuning of the degree of intrachain charge transfer and aromaticity of polymer backbone was adopted to design and synthesize new polymers applicable in photovoltaics. Three conjugated polymers P1 , P2 , and P3 were synthesized by alternating the electron‐donating dithieno[3,2‐b:2′3′‐d]pyrrole (D) and three different electron‐accepting (A) segments ( P1 : N‐(2‐ethylhexyl)phthalimide; P2 : 1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole; and P3 : thiophene‐3‐hexyl formate) in the polymer main chain. Among the three polymers, P2 possessed the broadest absorption band ranging from 300 to 760 nm, the lowest bandgap (1.63 eV), and enough low HOMO energy level (?5.27 eV) because of the strong intrachain charge transfer from D to A units and the appropriate extent of quinoid state in the main chain of P2 , which was convinced by the theoretical simulation of molecular geometry and front orbits. Photovoltaic study of solar cells based on the blends of P1 – P3 and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) demonstrated that P2 :PCBM exhibited the best performance: a power conversion efficiency of 1.22% with a high open‐circuit voltage (V_OC) of 0.70 V and a large short‐circuit current (I_SC) of 5.02 mA/cm² were achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Tuning the Photophysical Properties and Solid‐State Organization of Perfluorophenyl‐functionalized Dithieno[3,2‐b:2′,3′‐d]phospholes

A series of perfluorophenyl‐substituted dithienophosphole derivates has been synthesized. Investigation of their photophysical properties, as well as their organization in the solid state reveals that these properties can be manipulated via introduction of bromine substituents in 2,6‐position of the dithienphosphole scaffold, as well as the complexation of the phosphorus center with an electron rich gold(I) fragment. The strongly electron‐withdrawing character of the perfluorophenyl‐group surmounts the effect of the oxidation of the phosphorus center with respect to photophysics, leading to leading to optoelectronic features similar to those of the trivalent phosphole species. The trivalent phosphole species. The solid‐state organization of the members of this perfluorinated dithienophosphole family, on the other hand, strongly depends on the heteroatoms present within the system, as close intermolecular interactions can be observed between varieties of different atoms (Au‐Au, Br‐Br, Br‐O, Br‐C, F‐C, O‐S), next to regular C‐C π‐stacking interactions.     

Dithieno[2,3‐d:2',3'‐d']benzo[1,2‐b:4,5‐b']dithiophene (DTBDAT)‐based copolymers for high‐performance organic solar cells

P(BDT‐TCNT) and P(DTBDAT‐TCNT) , which has an extended conjugation length, were designed and synthesized for applications in organic solar cell (OSCs). The solution absorption maxima of P(DTBDAT‐TCNT) with the extended conjugation were red‐shifted by 5–15 nm compared with those of P(BDT‐TCNT) . The optical band gaps and highest occupied molecular orbital (HOMO) energy levels of both P(BDT‐TCNT) and P(DTBDAT‐TCNT) were similar. The structure properties of thin films of these materials were characterized using grazing‐incidence wide‐angle X‐ray scattering and tapping‐mode atomic force microscopy, and charge carrier mobilities were characterized using the space‐charge limited current method. OSCs were formed using [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) as the electron acceptor and 3% diphenylether as additive suppress aggregation. OSCs with P(BDT‐TCNT) as the electron donor exhibited a power conversion efficiency (PCE) of 4.10% with a short‐circuit current density of J_SC = 9.06 mA/cm², an open‐circuit voltage of V_OC = 0.77 V, and a fill factor of FF = 0.58. OSCs formed using P(DTBDAT‐TCNT) as the electron donor layer exhibited a PCE of 5.83% with J_SC = 12.2 mA/cm², V_OC = 0.77 V, and FF = 0.62. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3182–3192     

Synthesis of a Novel Fused Thiophene‐thieno[3,2‐b]thiophene‐thiophene Donor Monomer and Co‐polymer for Use in OPV and OFETs

The synthesis of a novel fused hexacyclic electron rich monomer incorporating thieno[3,2‐b]thiophene is reported and characterized by single crystal X‐ray diffraction. Suzuki co‐polymerization with benzothiadiazole (BT) afforded a novel low band‐gap polymer P4TBT with high molecular weights and good solution processability. Bulk heterojunction solar cell devices using the P4TBT and [70]PCBM gave power conversion efficiencies of 2.5%. Top‐gate, bottom‐contact field effect transistors (FETs) using P4TBT displayed high hole mobilities of 0.07 cm² · Vs⁻¹ demonstrating the suitability of the novel monomer and polymer for use in high performing organic electronic devices.

     

Synthesis and Reactions of Naphtho[1′,2′:4,5]Furo[3,2‐b]Pyridine and Naphtho[1′,2′:4,5]Furo[3,2‐d]Pyrimidine Derivatives

2‐Acyl‐3‐aminonaphtho[2,1‐b]furan ( 1 ) reacts with activated methylene such as malono nitrile or ethyl cyanoacetate to afford naphtho[1′,2′:4,5]furo[3,2‐b]pyridine 2a,b . Chloroacylation of the amino group in compound ( 1 ) gave compound 3 which reacts with different amines to produce compound 4 .     

Synthesis,characterization, and field‐effect transistor performance of poly[2,6‐bis(3‐tridecanoxythiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene]

A new copolymer of benzo[1,2‐b:4,5‐b′]dithiophene and 3,3′‐bis(tridecanoxy)‐5,5′‐bithiophene was synthesized through Stille copolymerization. The bis‐(3‐alkoxythiophene) monomer was synthesized through a silver fluoride mediated, palladium‐catalyzed cross‐coupling, in which bromide functional groups were preserved instead of consumed. The copolymer has been characterized and applied in field‐effect transistors, giving a hole mobility of 2 × 10^?3 cm²/Vs and an on/off ratio >10⁶, with negligible hysteresis, on standard silicon substrates. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1973–1978, 2010     

Dithieno[3,2‐b:2′,3′‐d]pyrrole Cored p‐Type Semiconductors Enabling 20 % Efficiency Dopant‐Free Perovskite Solar Cells

Organic p‐type semiconductors with tunable structures offer great opportunities for hybrid perovskite solar cells (PVSCs). We report herein two dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) cored molecular semiconductors prepared through π‐conjugation extension and an N‐alkylation strategy. The as‐prepared conjugated molecules exhibit a highest occupied molecular orbital (HOMO) level of ?4.82 eV and a hole mobility up to 2.16×10^?4 cm² V^?1 s^?1. Together with excellent film‐forming and over 99 % photoluminescence quenching efficiency on perovskite, the DTP based semiconductors work efficiently as hole‐transporting materials (HTMs) for n‐i‐p structured PVSCs. Their dopant‐free MA_0.7FA_0.3PbI_2.85Br_0.15 devices exhibit a power conversion efficiency over 20 %, representing one of the highest values for un‐doped molecular HTMs based PVSCs. This work demonstrates the great potential of using a DTP core in designing efficient semiconductors for dopant‐free PVSCs.     

2,3-Diarylbenzo[b]arsole: Structural Modification and Polymerization for Tuning of Photophysical Properties

2,3-Diarylbenzo[b]arsoles were synthesized from zirconacycles and diiodophenylarsine. The structural modification to the luminophore was attained through diarylacetylene precursors, Suzuki–Miyaura coupling, and oxidation of the arsenic atom. The emission properties were controlled according to these modifications. The 2,3-diarylbenzo[b]arsoles showed aggregation-induced emission enhancement; the stronger emission was observed in the solid states than in solutions. In addition, Suzuki–Miyaura polycondensation and olefin metathesis polymerization produced main- and side-chain polymers, respectively. The resultant polymers showed different emission behaviors such as aggregation caused quenching and aggregation induced emission enhancement.     

Benzo[1,2‐b:4,5‐b′]dithiophene Building Block for the Synthesis of Semiconducting Polymers

This review covers the synthesis and polymerization of benzo[1,2‐b: 4,5‐b′]dithiophene (BDT) to generate semiconducting polymers used in organic field‐effect transistors (OFET) and organic solar cells applications.     

Synthesis of new heteroaromatic nitrogen ligands: Pyrimido‐[4″,5″:4′,5′]‐thieno[3′,2′:4,5]thieno[3,2‐d]pyrimidines and 1,2,3‐triazine[4″,5″:4′,5′]thieno[3′,2′:4,5]thieno[3,2‐d]‐1,2,3‐triazines

An efficient one‐pot access for the synthesis of the previously unreported tetracyclic fused pyrimido‐[4″,5″:4′,5′]thieno[3′,2′:4,5]thieno[3,2‐d]pyrimidine ( 3 ) and 1,2,3‐triazine[4″,5″:4′,5′]thieno‐[3′,2′:4,5]thieno‐[3,2‐d]‐1,2,3‐triazine ( 5 ) heteroaromatic nitrogen ligands is described. The title compounds 3 and 5 were obtained from 3,4‐diaminothieno[2,3‐b]thiophene‐2,5‐dicarbonitrile and phosgeniminium chloride and sodium nitrite/HCl, respectively. Substituted condensed thieno[2,3‐b]thiophene derivatives 4 and 6 were synthesized by nucleophilic displacement of the chloroderivatives 3 and 5 .