可逆加成—断裂链转移自由基聚合在制备水溶性聚合物中的应用

水溶性聚合物在工业、农业、医药等领域都有着广泛用途,但随着近年对水溶性聚合物精细化的要求,寻找新的结构可控的聚合方法已成为迫切需求.由于可逆加成-断裂链转移(RAFT)自由基聚合具有适用单体范围广、反应条件温和、不受聚合方法的限制等优点,以及可控制聚合物的嵌段、接枝、梳型、星型、无规及梯度等结构,成为合成结构可控的水溶性聚合物的最有效手段之一.本文主要讨论了单体、引发剂、链转移剂、溶剂等组成对RAFT聚合反应的影响,并介绍了利用RAFT方法制备非离子、阴离子、阳离子及两性离子水溶性聚合物的实例.     

可逆加成-断裂链转移活性自由基聚合的应用研究进展

可逆加成-断裂链转移(Reversible addition-fragmentation chain transfer,RAFT)自由基聚合是活性自由基聚合领域的一次突破.由于该方法具有适用单体范围广、反应条件温和以及聚合实施方法多样等优点,已成为一种有效的分子设计和材料设计手段.它不但可实现聚合物链端及链段侧基的功能化和制备特定空间拓扑结构的大分子,比如嵌段、星型、梳状及链端氨基聚合物等,还可用于修饰固体材料表面及生物大分子来赋予其特殊的功能.本文综述了RAFT技术在实际应用中的实施研究进展.     

可逆加成-断裂链转移自由基聚合研究进展

RAFT(Reversible addition-fragmentation chain transfer,可逆加成-断裂链转移)自由基存在链增长自由基与链转移剂(RAFT试剂)之间的可逆蜕化转移,现已广泛应用于聚合物分子结构设计及众多功能高分子材料的合成,受到众多高分子研究者的关注,是一种发展较快的可控/活性聚合技术.本文在简要介绍了RAFT聚合发展历程基础上,综述了RAFT聚合反应机理,RAFT试剂的结构及其对聚合性能的影响,RAFT试剂与单体的匹配性,RAFT聚合实施方法等.同时也对RAFT聚合反应的发展进行了展望.     

可逆加成-断裂链转移聚合研究进展

对可逆加成．断裂链转移(RAFT)聚合的反应机理、可逆加成．断裂链转移荆的合成方法及其反应动力学的研究进展分别进行了综述。     

基于树形链转移剂的可逆加成断裂链转移聚合

可逆加成断裂链转移(RAFT)聚合是最近十多年来发展起来的一种活性/可控技术,链转移剂(CTA)为该技术的核心.本文介绍了采用R路径合成法、Z路径合成法合成R核与Z核树形链转移剂以及它们调控不同单体的RAFT聚合,合成树形-线性二嵌段共聚物、树形-线性-树形三嵌段共聚物和树形-星形聚合物等树枝状聚合物的研究进展.     

可逆加成-断裂链转移自由基聚合研究进展

综述了活性/可控自由基聚合中的可逆加成-断裂链转移(RAFT)自由基聚合研究进展;总结了RAFT试剂、RAFT聚合反应条件、RAFT聚合物及其结构形貌的最新研究进展;指出RAFT自由基聚合反应已被作为重要方法之一用于合成具有特定分子结构的聚合物.     

可逆加成-断裂链转移自由基共聚合研究进展

与其它可控/活性自由基聚合相比,可逆加成-断裂链转移(RAFT)自由基聚合具有适用单体范围广、反应条件温和、不受聚合实施方法的限制等优点,因此成为目前高分子合成研究最为活跃的领域之一.通过它不但实现了广泛单体的可控/活性聚合,还合成了嵌段、接枝、梳型、星型、无规及梯度等结构的聚合物.本文综述了RAFT自由基共聚合领域的研究进展,内容主要包括已报道的RAFT自由基共聚合反应体系和RAFT过程对共聚产物组成的影响.     

可逆加成-断裂链转移自由基聚合与点击化学相结合在制备特殊结构聚合物中的应用

可逆加成一断裂链转移(RAFT)聚合作为一种新型活性自由基聚合方法,由于其具有单体适用面广、聚合条件温和、不受聚合方法的限制等优点,已经成为聚合物分子设计的有效手段之一.点击化学(Click chaemistry)是近几年发展起来的一种快速合成的新方法,是指选用易得原料,通过可靠、高效而又具有选择性的化学反应来实现碳杂...     

可逆加成-断裂链转移活性自由基聚合

介绍了可逆加成-断裂链转移(Reversible addition-fragmentation chain tansfer,RAFT)活性自由基聚合的反应机理、聚合动力学和特点，对RAFT试剂的选择和制备作了简要介绍，并综述了RAFT聚合的发展动态及应用状况。     

RAFT聚合在聚合物分子结构设计中的应用

可逆加成-断裂链转移(reversible addition-fragmentation chain transfer,RAFT)聚合是一种新型的活性/可控自由基聚合方法,在制备窄分子量聚合物和设计聚合物分子结构方面具有独特的优势。本文首先介绍RAFT活性自由基聚合的机理、体系、特点及链转移(RAFT)试剂的选择,然后总结了近年来国内外利用RAFT聚合技术在设计无规和交替共聚物方面的应用,详细介绍了该方法在制备特殊结构共聚物,如嵌段、梯度、接枝、星形、树形和梳形结构聚合物的新应用,并对RAFT聚合技术在今后的研究重点和应用前景做了展望。     

基于RAFT活性自由基聚合的具有一定立构规整性的聚丙烯腈合成

运用RAFT活性自由基聚合方法探索了具有一定立构规整性的聚丙烯腈的合成。合成得到RAFT聚合的链转移剂MESA,并以1 H NMR进行了表征;以MESA作为链转移剂、碳酸乙烯酯为溶剂,在单体浓度为0.80 M、60℃、原料配比[AN]0/[MESA]0/[AIBN]0为2500∶5∶1的聚合条件下,成功合成出较高分子量(Mn=5.60×104g/mol)、窄分子量分布(PDI=1.15)的聚丙烯腈;进一步在各单体浓度的RAFT聚合中,加入单体摩尔量3%的AlCl3,得到聚丙烯腈数均分子量为6.1×104~6.5×104g/mol,全同立构组成为mm=32.1%~32.6%,聚合产物分子量分布宽度介于1.31~1.38之间,从而实现了在RAFT活性聚合体系中通过Lewis酸的作用合成得到具有一定立构规整性的聚丙烯腈。     

太阳光用于可逆加成-断裂链转移（RAFT）聚合反应的实验设计

作为培养应用型人才目标的新尝试,从研究性教学的理念出发,设计了太阳光诱导可逆加成-断裂链转移（RAFT）聚合的综合性高分子化学实验教学项目。该实验应用太阳光辐照,在仅添加S-十二烷基-S'-（α,α″-甲基-α″-乙酸）三硫代碳酸酯的情况下,进行了2-乙烯基吡啶的RAFT聚合实验。实验巧妙地将太阳光应用在RAFT聚合实验中,该实验具有实验现象明显和操作简单易行的优点。     

乳液体系中的RAFT可控/活性自由基聚合研究进展

可逆加成-断裂链转移聚合(RAFT)是新近发展起来的可控/活性自由基聚合方法。由于该方法具有适用单体范围广、反应条件温和、可采用多种聚合实施方法等优点,已成为一种有效的分子设计手段。本文总结了近几年文献报道的在乳液和细乳液体系中实施RAFT聚合反应的研究进展,对非均相体系的稳定性、聚合反应过程中的动力学特点、以及聚合产物的分子量及其分布等方面的研究进行了综述。     

原子转移自由基聚合(ATRP)在星形聚合物合成中的应用

综述了近10 年来采用原子转移自由基聚合(ATRP) 法合成星形聚合物的研究进展。从聚合单体、引发剂、聚合方法和反应条件以及聚合物性质等方面讨论了原子转移自由基聚合在星形聚合物合成中的应用,并根据聚合方法和引发剂对各种反应进行了分类。对原子转移自由基聚合技术在合成功能性复杂星形聚合物中的应用进行了展望。     

Controlled Radical Polymerization of N-Vinylpyrrolidone by Reversible Addition-Fragmentation Chain Transfer Process

Summary: Poly(N-vinylpyrrolidone) (PNVP) was polymerized by RAFT process using diphenyldithiocarbamate of diethylmalonate (DPCM) as the reversible chain transfer agent in the presence of a small percentage of a conventional radical initiator (AIBN). The molar mass of the polymers synthesized by this method was found to increase with conversion and time. The presence of end group in the polymer chain could be confirmed by ¹H NMR spectra. The molar masses calculated using ¹H NMR spectroscopy and static light scattering (SLS) showed good agreement with the theoretical molar masses. The RAFT compound was fully consumed during the initial stages of the polymerization itself. The controlled nature of these polymers was further confirmed by generating diblock copolymers by sequential addition of monomers such as styrene or n-butyl acrylate (n-BA). PNVP efficiently participated as a macro-RAFT reagent, and cross-over reaction between the two blocks efficiently occurred. The successful diblock copolymer synthesis using PNVP as macro-transfer reagent further confirms the “controlled” nature of such synthetic procedure.     

可逆加成-断裂链转移(RAFT)分散聚合

RAFT分散聚合是在分散体系中实施RAFT聚合的一种非均相聚合方法。RAFT分散聚合的最大特点是它可以直接制备聚合物分子量可控、分子量分布窄的聚合物粒子。本文简要介绍了在小分子RAFT试剂和大分子RAFT试剂(Macro-RAFT)存在下,RAFT分散聚合的聚合动力学、聚合物的成核和粒子的增长。小分子RAFT试剂存在下的RAFT分散聚合是一个与普通的分散聚合类似,可以看作为非均相条件下的RAFT聚合,它可以制备微米尺度的聚合物粒子。Macro-RAFT存在下的RAFT分散聚合,是制备高浓度、纳米尺度的嵌段共聚物胶体的重要方法,它包含嵌段共聚物胶束化之前的均相聚合和嵌段共聚物胶束化后的非均相聚合两个阶段。     

Ab initio Emulsion Polymerization by RAFT (Reversible Addition–Fragmentation Chain Transfer) through the Addition of Cyclodextrins

A novel process to produce homo‐ and copolymers by RAFT polymerization in emulsion is presented. It is known that RAFT‐controlled radical polymerization can be conducted in emulsion polymerization without disturbing the radical segregation characteristic of this process, thus leading to polymerization rates identical to those encountered in the corresponding nonliving systems. However, RAFT agents are often characterized by very low water solubility and, therefore, they diffuse very slowly from the monomer droplets, where they are initially solubilized, to the reaction loci, i.e., the polymer particles. Accordingly, when used in emulsion polymerization, they are practically excluded from the reaction. In this work, we show that cyclodextrins, well‐known for their ability to form water‐soluble complexes with hydrophobic molecules, facilitate the transport across the H₂O phase of the RAFT agent to the polymer particles. Accordingly, chains grow through the entire process in a controlled way. This leads to the production of low‐polydispersity polymers with well‐defined structure and end functionalities as well as to the possibility of synthesizing block copolymers by a radical mechanism.     

Narrowly Distributed Dendronized Polymethacrylates by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

Summary: RAFT is applied to the dendronized macromonomers of the first and second generation, 1 and 2 , respectively. Good results are obtained in the presence of AIBN as radical initiator, with compound 6 as mediator and at mediator to monomer ratios of 2:200 for monomer 1 ( = 320 000, PDI = 1.24) and monomer 2 ( = 178 000, PDI = 1.20). The common characteristics of a controlled polymerization are reasonably met. The more sterically demanding G2 monomer 2 requires higher polymerization temperatures.

     

Copolymerization of N-Vinylcarbazole and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Summary: The reversible addition–fragmentation chain transfer (RAFT) random copolymerization of N-vinylcarbazole (NVC) and vinyl acetate (VAc) was carried out using s-benzyl-o-ethyl dithiocarbonate (BED) as the chain transfer agent and 2,2′-azoisobutyronitrile (AIBN) as the initiator in 1,4-dioxane solution at 70 °C. The polymerization showed the characteristics of ‘living’ free radical polymerization behaviors: first order kinetics, linear relationships between molecular weight and conversion, and narrow polydispersity of the polymers. The reactivity ratios of NVC and VAc were calculated via the Kelen–Tudos (KT) and non-linear error in variable (EVM) methods and showed as r₁ = 1.938 ± 0.191, r₂ = 0.116 ± 0.106. The thermal behavior of the copolymers with different content of NVC and VAc was investigated by DSC and TGA. The results showed that the introduction of a VAc segment into copolymer significantly reduced the T_g of the NVC homopolymers. FT-IR spectra, fluorescence spectra, and cyclic voltammetric behavior of these copolymers were also measured and compared with those of NVC homopolymers. The copolymers showed similar oxidative behavior to the NVC homopolymer. However, there was only one reductive potential peak shown for the copolymers at about 0.058 V.