Synthesis and Structure of 1,9-Dinitro-5-oxa-11-azatricyclo[6.4.0.04,9]dodecan-2-one

A series of 6,11-disubstituted 1,9-dinitro-5-oxa-11-azatricyclo[6.4.0.0^4,9 ]dodecan-2-ones were prepared from anionic adducts of 2,4-dinitrophenol with propanone and 2-phenylethanone carbanions by successive selective reduction with sodium borohydride and aminomethylation with formaldehyde and primary amines. By spectral methods and by quantum-chemical calculations following PM3 method the structure of the molecules synthesized was shown to contain all the three rings in a chair form with equatorial substituents in positions 6 and 11.     

Intramolecular hydrogen abstraction promoted by N-radicals: synthesis of chiral 7-oxa-2-azabicyclo[2.2.1]heptane and 8-oxa-6-azabicyclo[3.2.1]octane ring systems

Homochiral 7-oxa-2-azabicyclo[2.2.1]heptane and 8-oxa-6-azabicyclo[3.2.1]octane ring systems can be synthesized by reaction of specifically protected phosphoramidate derivatives of carbohydrates with (diacetoxyiodo)benzene or iodosylbenzene and iodine. The reaction mechanism goes through homolytic fragmentation of a hypothetical iodoamide intermediate. The N-radicals so generated participate in an intramolecular hydrogen abstraction reaction (IHA) to give the aforementioned bicycles.     

13-乙酰基-9-甲基-11-羰基-8-氧代-10,12-二氮杂三环[7.3.1.02,7]十三碳-2,4,6-三烯的一锅煮合成和结构表征

An efficient and environmentally friendly procedure for the one-pot synthesis of 13-acetyl-9-methyl-11-oxo-8-oxa-10,12-diazatricyclo7.3.1.02,7trideca-2,4,6-triene from salicylaldehyde, acetylacetone and urea via Biginelli condensation and intramolecular Michael-addition by using magnesium bromide as an inexpensive and easily available catalyst in a solvent-free condition is described. The structural elucidation of the product is reported by 1H- and 13C-NMR spectra. The product can also be identified by its EI TOF mass spectrometry based on the molecular ion at m/s 246(10%) and on the fragment ions in which two nitrogen atoms are remained. Three kinds of characteristic fragmentation pathways from the molecular ion were observed. One is the loss of the OH radical to form the dihydropyrimidinone cation at m/z 229(48%), followed by elimination of a molecular methane forming the pyrimidinone cation at m/z 213(27%). The second is the cleavage of the C6H4OH radical, and the formation of the dihydropyrimidinone cation at m/z 153(24%). The third one is the loss of MeC=O radical to afford the oxygen-bridged fragment ion at m/z 203(33%).     

Functional [6]pericyclynes: synthesis through [14+4] and [8+10] cyclization strategies

Critical analysis of possible strategies for the synthesis of novel carbo-benzene derivatives suggests several [(18-n)+n] routes for the preparation of hexaoxy[6]pericyclyne precursors. Beyond the previously attempted [9+9] symmetrical scheme (n=9), the a priori most selective strategies are those for which n=1, 4, 7, 10, 13, and 16. They involve a cyclizing double-propargylation of a C(18-n) omega-bis-terminal-skipped oligoyne containing (19-n)/3 triple bonds with a C(n) omega-dicarbonyl-skipped oligoyne containing (n-1)/3 triple bonds. To complement the previously used [11+7] strategy, the [14+4] and [8+10] strategies were thus explored. They proved to be efficient, affording seven novel hexaoxy[6]pericyclynes corresponding to six different substitution patterns. These compounds were obtained in 7-15 steps as mixtures of stereoisomers. Thus, by using dibenzoylacetylene as the C(4) electrophile, a [14+4] strategy allowed the synthesis of two hexaphenyl representatives with two or four free carbinol vertices. This approach also afforded tetraphenyl representatives in which the two remaining carbinoxy vertices were substituted with either two alkynyl or one 4-anisyl and one 4-pyridyl groups. By using the hexacarbonyldicobalt complex of butynedial as the C(4) electrophile, a [14+4] strategy also allowed the isolation of a tetraphenylhexaoxy[6]pericyclyne with two adjacent unsubstituted carbinol vertices. A regioisomer with two opposite unsubstituted carbinol vertices was obtained through an [8+10] strategy and its oxidation afforded the corresponding pericyclynedione. Several attempts at synthesizing diphenylhexaoxy[6]pericyclynes with four unsubstituted carbinoxy vertices are described. Only an [8+10] strategy allowed the generation of a fragile diphenylhexaoxy[6]pericyclyne with four adjacent unsubstituted carbinoxy vertices, which could be partly characterized. These results show that the synthesis of the nonsubstituted hexahydroxy[6]pericyclyne, the ring carbo-mer of [6]cyclitol, is a difficult challenge.     

Intramolecular hydrogen abstraction reaction promoted by N-radicals in carbohydrates. Synthesis of chiral 7-oxa-2-azabicyclo[2.2.1]heptane and 8-oxa-6-azabicyclo[3.2.1]octane ring systems

The reaction of phenyl and benzyl amidophosphates and alkyl and benzyl carbamate derivatives of aminoalditols with (diacetoxyiodo)benzene or iodosylbenzene and iodine is a mild and selective procedure for the synthesis of chiral 7-oxa-2-azabicyclo[2.2.1]heptane and 8-oxa-6-azabicyclo[3.2.1]octane ring systems under neutral conditions. This reaction can be considered to be an intramolecular N-glycosidation that goes through an intramolecular 1,5-hydrogen abstraction promoted by an N-amido radical followed by oxidation of the transient C-radical intermediate to an oxycarbenium ion. This methodology proved to be useful not only as a suitable strategy for the preparation of these bicyclic arrays but also for the selective oxidation of specific carbons of the carbohydrate skeleton, constituting a good procedure for the synthesis of protected N,O-uloses.     

Synthesis of Novel Isoxazolyl 1,6-Dithia-4,9-diazaspiro[4,4]nonane-3,8-diones and 1-Oxa-6-thia-2,4,9-triazaspiro[4,4]non-2-ene-8-ones

The key intermediates, 3-(5-methyl-3-isoxazolyl)-2-arylimino-1,3-thiazolan-4-ones (3), were obtained from 3-amino-5-methylisoxazole (1) by reaction with chloroacetyl chloride followed by treatment with aryl isothiocyanates. Cyclocondensation of 3 with mercapto acetic acid furnished novel isoxazolyl 1,6-dithia-4,9-diazaspiro[4,4]nonane-3,8-diones (4). Cycloaddition of 3 with benzonitrile oxides afforded novel isoxazolyl 1-oxa-6-thia-2,4,9-triazaspiro[4,4]non-2-ene-8-ones (5).     

Syntheses,Crystal Structures,and Reactivity of [enH]4[Sn2Se6]·en, [enH]4[Sn2Te6]·en and [enH]4[Sn2S6]: Known Anions within Novel Coordination Spheres obtained by Novel Synthesis Routes

The hexachalcogenodistannates K₆[Sn^III₂Se₆] or Li₄[Sn^IV₂Te₆]·8en were recently reported to simultaneously act as mild oxidants and chalcogenide sources in reactions with CoCl₂/LiCp* (Cp* = pentamethylcyclopentadienide) while the Sn—E (E = Se, Te) fragment is not kept in the products, e.g. [(Cp*Co)₃(μ₃‐Se)₂], [(Cp*Co)₃(μ₃‐Se)₂][Cl₂Co(μ₂‐Cl)₂Li(thf)₂] or [(Cp*Co)₄(μ₃‐Te)₄]. In search of related reagents with possibly different reaction behavior, we isolated and crystallographically characterized isotypic compounds [enH]₄[Sn^IV₂Se₆]�en ( 1 ), and [enH]₄[Sn^IV₂Te₆]·en ( 2 ) (en = 1, 2‐diaminoethane), that result from an uncommon disproportion/re‐arrangement reaction: distannate(III) K₆[Sn₂E₆] (E = Se, Te) was reacted with en·2HCl to yield 1 or 2 under disproportion of Sn^III to Sn^II and Sn^IV. Another pathway was necessary to synthesize the respective but solvent‐free thiostannate [enH]₄ [Sn^IV₂S₆] ( 3 ), since the phase “K₆[Sn₂S₆]” is unknown. This second method started out from SnCl₄·2THF and S(SiMe₃)₂ in en solution. However, using E(SiMe₃)₂ (E = Se, Te) instead of S(SiMe₃)₂, 1 and 2 are also obtained this way. 1—3 are the first chalcogenostannates that exhibit exclusively [enH]⁺ counterions. The compounds were characterized by means of X‐ray crystallography and NMR spectroscopy. They seem to be suitable for reactions towards group 8‐10 metal complexes. Preliminary experiments indicate that the binary anions 1 — 3 coordinated by 1‐aminoethylammonium ions react more slowly compared to the anionic phases tested until now.     

Transformations of the pyrido[1,2-a]pyrazine ring system into imidazo[1,2-a]pyridines,imidazo[1,2-a]pyrimidines and 2-oxa-6a, 10c-diazaaceanthrylenes

Transformations of methyl 3-dimethylamino-2-(1-methoxycarbonyl-4-oxo-4H-pyrido[1,2-a]pyrazin-3-yl)acrylate with some cyanomethylenecarbonyl group containing compounds or cyanamide into imidazo-[1,2-a]pyridines, irmdazo[1,2-a]pyrimidines and 2-oxa-6a, 10c-diazaaceanthrylenes are described.     

Synthesis and ring-opening polymerization of novel bicyclic oxalactams: 2-oxa-5-azabicyclo[2.2.2]octan-6-one

A novel bicyclic oxalactam 2-oxa-5-azabicyclo [2.2.21 octan-6-one (2,5-BOL) was synthesized from sodium 3,4-dihydro-2H-pyran-2-carboxylate through a seven-step reaction sequence. Anionic ring-opening polymerization of 2,5-BOL was carried out in bulk at 12OOC or in dimethyl sulfoxide at 40, 60, and 80°C by using potassium pyrrolidonate and the N-benzoyl derivative of 2,5-BOL as catalyst and activator, respectively. The polymerization gave a new polyamide containing cis- and trans-2,5-linked tetrahydropyran rings in the main chain. The cis/trans ratio varied from 70/30 to 95 /5 depending on the reaction conditions. The polyamide having number average molecular weights of 3000–8000 was soluble in a variety of solvents including methanol, ethanol, dimethyl sulfoxide, dimethylformamide, chloroform, and dichloromethane. It began to decompose at 280–32OOC depending on the compositions of the cis- and trans-2,5-linked structural units. The anionic ring-opening polymerizability of 2,5-BOL was found to be much lower than its structural isomer, 8-oxa-6-azabicyclo[ 3.2.11 octan-7-one (8,6-BOL).     

Enantioselective Synthesis of [9]‐ and [11]Helicene‐like Molecules: Double Intramolecular [2+2+2] Cycloaddition

The enantioselective synthesis of completely ortho‐fused [9]‐ and [11]helicene‐like molecules has been achieved through a rhodium‐mediated, intramolecular, double [2+2+2] cycloaddition of phenol‐ or 2‐naphthol‐linked hexaynes. Crystal structures and photophysical properties of these [9]‐ and [11]helicene‐like molecules have also been disclosed.     

On Tetrachlorophosphonium Chlorometallates of Rhenium and Molybdenum: Syntheses,Crystal Structures,and Magnetism of [PCl4]2[Re2Cl10] and [PCl4]3[ReCl6]2, and the Magnetic Properties of [PCl4]2[Mo2Cl10]

MoCl₄, ReCl₄, and ReCl₅ react with PCl₅ in sealed glass ampoules at temperatures between 220° and 320° to [PCl₄]₂[Mo₂Cl₁₀] ( 1 ) [PCl₄]₂[Re₂Cl₁₀] ( 2 ), and [PCl₄]₃[ReCl₆]₂ ( 3 ). 2 crystallizes isotypically to the previously reported 1 and the respective titanium and tin containing analogues. The structure (triclinic, P1, Z = 1, a = 897.3(2), b = 946.0(2), c = 687.13(9) pm, α = 95.59(2)°, β = 95.80(2)°, γ = 101.07(2)°, V = 565.4(2) 10⁶ pm³) is built of tetrahedral [PCl₄]⁺ and edge sharing double octahedral [Re₂Cl₁₀]^2– ions and can be derived from a hexagonal closest packing of Cl^– ions with tetrahedral and octahedral holes partially filled by P(V) and Re(IV), respectively. 3 crystallizes isotypically to [PCl₄]₃[PCl₆][MCl₆] (M = Ti, Sn) (tetragonal, P 4₂/mbc, Z = 4, a = 1496.2(1), c = 1363.2(2) pm). Because no evidence was found for the presence of [PCl₆]^– ions, Re in 3 has to be of mixed valency with Re^IV and Re^V sharing the same crystallographic site. The structure can be derived from a cubic closest packing or alternatively from an only sparsely distorted body centered cubic arrangement of Cl^– ions which is rarely found for anion arrays. The tetrahedral and octahedral holes are partially filled by P^V and M^IV/V, respectively. Magnetic measurements show all three compounds to be paramagnetic and confirm the oxidation state IV for Mo and Re in 1 and 2 and the mixed valence (IV/V) for Re in 3 .