Fluorescence,ion binding,and viscosity properties of poly[2‐ and 4‐vinylpyridine]s in methanol and in sulfuric acid

Fluorescence intensities of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) in H₂SO₄/H₂O solutions were increased with increasing acid concentration. The intensities for P2VP were found to be six times stronger than that of P4VP. These differences were accounted for by the microenvironment of protonated pyridinium group. The ion binding properties of 4‐methylpyridine (4MP), P2VP, and P4VP were investigated in methanol using Tb³⁺ as a fluorescence probe. The increase of fluorescence intensity of Tb³⁺ in [P2VP–Tb³⁺] and [P4VP–Tb³⁺] complexes is due to both the replacement of the inner coordinated methanol molecules and ligand‐to‐metal energy transfer. The model compound 4MP was inefficient from this point of view, and the results were attributed to the polymer cooperative effect. Reduced viscosities of poly(vinylpyridine)s (PVP) in methanol were similar to nonionic polymers; however, when TbCl₃ was added into the solution, the viscosities increased upon dilution. These results also indicated that PVP form complexes with Tb³⁺ in methanol. When diluted, the counterions Cl⁻ are allowed to dissociate and the charged polymer expands. Consequently, the solution's viscosity increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1341–1345, 1999     

Controlled Handedness of Twisted Lamellae in Banded Spherulites of Isotactic Poly(2‐vinylpyridine) as Induced by Chiral Dopants

Herein, we suggest a unique approach to control the handedness of twisted lamellae in banded spherulites of a stereoregular polymer, isotactic poly(2‐vinylpyridine) (iP2VP). When (R)‐ or (S)‐hexahydromandelic acid (HMA), which can associate with iP2VP, was introduced as a chiral dopant, mirror‐image CD spectra in the complex systems showed induced circular dichroism (ICD) of the iP2VP by chiral HMA. Banded spherulites resulting from lamellar twisting due to the imbalanced stresses at the opposite folding surfaces could be formed by crystallization of the iP2VP/HMA complexes, which had a crystalline structure similar to that of neat iP2VP. A preferential sense of the twisted crystalline lamellae was found in the iP2VP/HMA complex, thus suggesting homochiral evolution from conformational to hierarchical chirality.     

Electronic effect of polymeric environments on metalloporphyrins

Electronic modulations brought about on ionic metalloporphyrins by various polymeric environments were investigated in detail with spectral analysis. The porphyrins employed were metalloderivatives of anionic p‐sulfonated tetraphenylporphyrins [MTPPS; M = Cu(II), Zn(II), Ag(II), and Cd(II)]. The polymer system chosen involved poly(4‐vinylpyridine) (PVP), crosslinked and linear polystyrenes partially chloromethylated and quaternized (PS and PS′), and polyethylene glycol (PEG). These were expected to interact with MTPPS through a coordinate bond on its central metal atom (PVP), through Coulombic attraction (PS and PS′), or through ion–dipolar interaction (PEG). Significant changes in the electronic spectra (redshifts in both B and Q bands) were seen in polymer‐incorporated MTPPS in comparison with free MTPPS. For a given metalloporphyrin, the order of the spectral shifts was always MTPPS < PEG–MTPPS < PVP–MTPPS < PS–MTPPS < PS′–MTPPS. Furthermore, for a given polymer matrix, the extent of spectral variation was metal‐dependent: Cd > Zn > Ag > Cu. This is explained in terms of the molecular distortions and associated changes in the metalloporphyrin orbital overlap and the charge delocalization from the peripheral substituents or coordinating ligand functions to the porphyrin π framework. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 326–334, 2001     

EPR studies of copper(II) complexes with poly-2-methyl-5-vinyl-pyridine and poly-2-vinylpyridine

Cu(II) complexes of poly-2-vinylpyridine (P2VP) and poly-2-methyl-5-vinylpyridine (P2M5VP), partially quaternized by dimethylsulphate, and of the analogues (2-methyl-5-ethylpyridine, 2-ethylpyridine) were studied by EPR spectroscopy in a mixture of methanol and water. Peculiarities of the complex formation reaction were observed for the polymers compared to the analogues. At ratios of [Py]:[Cu²⁺] > 40, the predominant formation of tetrapyridinate-Cu(II) species [(CuL₄)]²⁺ was found for P2M5VP. However, differences were found between the parameters of EPR-spectra for the [CuL₄]²⁺ in the polymer from that of the [Cu(2M5EPy)₄]²⁺. It was suggested that, in the polymer, [CuL₄]²⁺ complexes with structure intermediate between square planar and tetrahedral are formed. Moreover, the maximum value of the pyridine fraction forming [CuL₄]²⁺ in P2M5VP was found to be about 10% and it is appreciably less the value of the fraction in P4VP (about 40%). For P2VP at [Py]:[Cu²⁺] > 40, an insignificant amount of [CuL₁]²⁺ and [CuL₂]²⁺ are formed in the solution. It follows that the main chain position relative to the ligand nitrogen atom in these polyvinylpyridines affects profoundly the complexation between the macromolecules and Cu(II) ions. The steric hindrances due to the chain are likely to change the [CuL₄]²⁺ structure and to prevent complex formation for P2VP.     

Structural isomer effects on the morphology of block copolymer/metal salts hybrids

The structural isomer effects on phase behavior of block copolymer/FeCl₃ hybrids were investigated by comparing structures of two series of blends based on polystyrene‐b‐poly(4‐vinylpyridine) (PS‐P4VP) and polystyrene‐b‐poly(2‐vinylpyridine) (PS‐P2VP), with the same molecular weight and the same composition. By conbining fourier transform infrared (FT‐IR) spectroscopy and differencial scaninng calorimetry, successful achievements of selective dispersion of FeCl₃ into poly(vinylpyridine) phase via coordination were verified. Complementary morphological observation by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), it has been clarified that phase behavior for two isomer series is considerably different. That is, neat PS‐P4VP formed thicker cylindrical domains than that of neat PS‐P2VP due to much stronger Flory‐Huggins interaction parameter χ, χ_PS‐P4VP » χ_PS‐P2VP. As for PS‐P2VP/FeCl₃ hybrids, morphological transition can be taken place at the smaller amount of metal salt; furthermore, P2VP blend series form lamellar structures with evidently larger periodic length at the same amount of metal salt. This is probably caused by the event that excess metal salt also contributes to lamellar expansion by localizing at the center of P2VP lamellar phase. Moreover, the saturation limit of introduced metal salt in P2VP was smaller than that in P4VP due to the steric hindrance for a lone pair electrons on nitrogen atoms directed to the main chain of P2VP. These results can be explained by the structural isomer effects on the conformation of the P2VP chains at coordinated state with FeCl₃, that is, P2VP chains prefer to form the intramolecular coordination due to the short range interaction so as to make themselves stiffer, whereas P4VP chains tend to adopt the long range interaction including intra‐ and intermolecular coordinations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 377–386     

Stereoregular control of poly(4‐vinyl pyridine) on free radical polymerization by using the inclusion complex with randomly methylated β‐cyclodextrin

Highly heterotactic poly(4‐vinyl pyridine)s (P4VPs) with the fraction of mr content (f_mr) > 0.81 were synthesized by free radical polymerization of 4‐vinyl pyridine (4VP) with randomly methylated β‐cyclodextrin (β‐RMCD) in acidic aqueous media of HNO₃ and CF₃COOH at 40 °C. The heterotacticity of P4VP strongly depended on the neutralization of 4VP. The complete neutralization of 4VP with HNO₃ or CF₃COOH increased the heterotacticity of P4VP, whereas atactic P4VP was obtained in water. The partial decomposition of β‐RMCD by HCl reduced the heterotacticity of P4VP (f_mr ≈ 0.74). The structures of inclusion complexed monomers were determined by Job's plot, 2D NMR with nuclear Overhauser enhancement spectroscopy analyses, and simulation by MM2. The 1:2 complex with [β‐RMCD]:[4VP] with meso placement of 4VPs in β‐RMCD was formed when 4VP was completely neutralized with acid, whereas the 1:1 complex was formed in water. The mechanism of heterospecific control by using β‐RMCD was proposed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Self‐assembly of a triblock terpolymer mediated by hydrogen‐bonded complexes

A poly(methyl methacrylate)‐block‐poly(4‐vinylpyridine)‐block‐polystyrene (PMMA‐b‐P4VP‐b‐PS) triblock terpolymer is synthesized by ATRP to study its self‐assembly with PAA in organic solvents. The self‐assembly behavior of this system is compared with the one of a mixture of two diblocks, namely polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and poly(methyl methacrylate)‐block‐poly(methacrylic acid) (PMMA‐b‐PMAA). For both systems, formation of hydrogen‐bonded complexes between the P4VP and PMAA or PAA blocks occurs. These complexes become insoluble in the solvent used and micelles with a P4VP/P(M)AA complexes core surrounded by PS and PMMA coronal chains are obtained in both cases. These micelles are analyzed by DLS and TEM. Spherical micelles are formed for both systems but the hydrodynamic radii obtained for the two types of micelles are different. Indeed, the micelles formed by the PMMA‐b‐P4VP‐b‐PS + PAA system are smaller than those observed for the PS‐b‐P4VP + PMMA‐b‐PMAA system. Finally, the effect of the molar ratio of the P4VP/PMAA complexing blocks is investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 459–467     

Poly[(sodium sulfamate/carboxylate)isoprene‐b‐2‐vinyl pyridine] block polyampholytes: Synthesis and self‐assembly in aqueous media

We report on the synthesis of poly[(sodium sulfamate/carboxylate) isoprene‐b‐2‐vinyl pyridine] block polyampholytes (SCPI‐P2VP), utilizing anionic polymerization and post polymerization functionalization reactions. The precursor poly(isoprene‐b‐(2‐vinylpyridine)) diblock copolymers (PI‐P2VP), containing a polyisoprene (PI) block with high 1,4 microstructure, were prepared by anionic polymerization high vacuum techniques, in two steps, involving change of the polymerization solvent. Subsequent functionalization of the PI block with chlorosulfonyl isocyanate, introduced sulfamate and carboxylate groups in the polymer chains and produced the desired block polyampholytes. The successful synthesis of the polyampolytes was corroborated by elemental analysis and IR spectroscopy measurements. The self‐assembly behaviour of the aforementioned polyampholytes was studied in aqueous solutions as a function of pH, by aid of dynamic and static light scattering, zeta potential, fluorescence spectroscopy and atomic force microscopy. Experimental results indicate that the block polyampholytes form micellar structures with P2VP cores and SCPI coronas at pH > 6, whereas more compact nanoparticles are formed at pH < 4 from the complexation of positively charged P2VP and SCPI, stabilized by excess negative charges of uncomplexed SCI segments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ionic conductivity of poly(2-vinyl pyridinium) salt in solid state

The preparation, characterization and conductivities of poly(2vinylpyridine), P-2VP and its fluoride derivative are reported here. The polymer P-2VP was prepared by thermal polymerization of 2vinylpyridine, 2VP and its salt, by acidification with HF. The formation of P-2VP salt was confirmed by IR and ¹H NMR techniques. Conductivities were determined from 30 to 110 °C in solid state. The addition of F⁻ ion increases the ionic conductivity of the polymer dramatically. The P-2VP-HF behaves as an intrinsic conducting polymer. The determination of the molecular mass of P-2VP and P-2VP-HF indicated that 95% of pyridine molecule was hydrofluorinated.     

Macrocyclic Dinuclear Palladium Complex as a Novel Doubly Threaded [3]Rotaxane Scaffold and Its Application as a Rotaxane Cross‐Linker

A dinuclear Pd^II complex possessing a cyclic ligand was developed as a novel doubly threaded [3]rotaxane scaffold and applied as a rotaxane cross‐linker reagent. The dinuclear complex (PdMC)₂ was prepared by one‐step macrocyclization followed by the double palladation reaction. ¹H NMR analysis and UV/Vis measurements revealed the formation of a doubly threaded pseudo[3]rotaxane by the complexation of (PdMC)₂ with 2 equivalents of 2,6‐disubstituted pyridine 3 through double metal coordination. The treatment of (PdMC)₂ with 2 equivalents of 4‐vinylpyridine (VP) afforded a doubly threaded [3]rotaxane cross‐linker (PdMC‐VP)₂ . Radical co‐polymerization of VP and t‐butylstyrene in the presence of (PdMC‐VP)₂ afforded a stable rotaxane cross‐linked polymer (RCP). An elastic RCP was also prepared by using n‐butyl acrylate as a monomer. The obtained RCPs exhibited higher swelling ability and higher mechanical toughness compared with the corresponding covalent cross‐linked polymers.     

Synthesis of miktoarm star amphiphilic block copolymers via combination of NMRP and ATRP and investigation on self‐assembly behaviors

The novel trifunctional initiator, 1‐(4‐methyleneoxy‐2,2,6,6‐tetramethylpip‐eridinoxyl)‐3,5‐bi(bromomethyl)‐2,4,6‐trimethylbenzene (TEMPO‐2Br), was successfully synthesized and used to prepare the miktoarm star amphiphilic poly(styrene)‐(poly(N‐isopropylacrylamide))₂ (PS(PNIPAAM)₂) via combination of atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMRP) techniques. Furthermore, the star amphiphilic block copolymer, poly (styrene)‐(poly(N‐isopropylacrylamide‐b‐4‐vinylpyridine))₂ (PS(PNIPAAM‐b‐P4VP)₂), was also prepared using PS(PNIPAAM)₂ as the macroinitiator and 4‐vinylpyridine as the second monomer by ATRP method. The obtained polymers were well‐defined with narrow molecular weight distributions (M_w/M_n ≤ 1.29). Meanwhile, the self‐assembly behaviors of the miktoarm amphiphilic block copolymers, PS(PNIPAAM)₂ and PS(PNIPAAM‐b‐P4VP)₂, were also investigated. Interestingly, the aggregate morphology changed from sphere‐shaped micelles (4.7 < pH < 3.0) to a mixture of spheres and rods (1.0 < pH < 3.0), and rod‐shaped nanorods formed when pH value was below 1.0. The LCST of PS(PNIPAAM)₂ (pH = 7) was about 31 °C and the LCST of PS(PNIPAAM‐b‐P4VP)₂ was about 35 °C (pH = 3). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6304–6315, 2009     

Segregation of Coronal Chains in Micelles Formed by Supramolecular Interactions

Summary: Spherical micelles have been formed by mixing, in DMF, a poly(styrene)‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐block‐P2VP‐block‐PEO) triblock copolymer with either poly(acrylic acid) (PAA) or a tapered triblock copolymer consisting of a PAA central block and PEO macromonomer‐based outer blocks. Noncovalent interactions between PAA and P2VP result in the micellar core while the outer corona contains both PS and PEO chains. Segregation of the coronal chains is observed when the tapered copolymer is used.

Inclusion of comb‐like chains with short PEO teeth in the corona triggers the nanophase segregation of PS and PEO as illustrated here (PS = polystyrene; PEO = poly(ethylene oxide)).     

Preparation of P4VP-g-PSt Copolymer Microspheres with Controllable Size by Atom Transfer Radical Polymerization Synthesized Poly(4-vinylpyridine) Macromonomer

Poly(4‐vinylpyridine) macromonomer (St‐P4VP) with a styryl end group was synthesized by atom transfer radical polymerization (ATRP) of 4‐vinylpyridine using p‐(chloromethyl)styrene (CMSt) as functional initiator, CuCl as catalyst and tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as ligand in 2‐propanol. The structure of St‐P4VP macromonomer was identified by proton nuclear magnetic resonance (¹H NMR). The result of gel permeation chromatography (GPC) illustrated that the number‐average molecular weight of St‐P4VP could be controlled by adjusting polymerization conditions. Poly(4‐vinylpyridine) grafted polystyrene microspheres (P4VP‐g‐PSt) were then prepared by dispersion copolymerization of styrene with St‐P4VP macromonomers. The effects of polymerization reaction parameters such as medium polarity, concentration of St‐P4VP macromonomer and polymerization temperature on the sizes and size distribution of P4VP‐g‐PSt microspheres were investigated. The results of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser light scattering (LLS) indicated that mono‐dispersed P4VP‐g‐PSt microspheres with average diameters of 100–200 nm could be obtained when the molar ratio of St to St‐P4VP was 0.25:100 in ethanol/water mixed solvents (V/V=80:20) at 60°C. Such kind of graft copolymer microspheres was expected to be applied to many fields such as drug delivery system and protein adsorption/separation system due to their particular structure.     

Selective Template Removal by Thermal Depolymerization to Obtain Mesostructured Molybdenum Oxycarbide

The carbon content of mesostructured organic‐inorganic hybrid material of a cylindrical block copolymer template of poly(2‐vinylpyridine)‐block‐poly(allyl methacrylate) (P2VP‐b‐PAMA) and ammonium paramolybdate (APM) could be reduced by thermal depolymerization. By calcination in vacuo at 320 °C the PAMA core can be completely removed while the remaining P2VP brush preserves the mesostructure. The P2VP‐APM composite can then be carburized in‐situ to MoO_xC_y in a second pyrolysis step without any additional carbon source but P2VP. The molybdenum oxycarbide nanotubes obtained, form hierarchically porous non‐woven structures, which were tested as catalyst in the decomposition of NH₃. They proved to be catalytically active at temperatures above 450 °C. The activation energy was estimated from an Arrhenius Plot to be 127 kJ · mol^–1.     

Dimensional Control of Block Copolymer Nanofibers with a π‐Conjugated Core: Crystallization‐Driven Solution Self‐Assembly of Amphiphilic Poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT₂₃‐b‐P2VP₁₁₅ (block ratio=1:5) and P3HT₄₄‐b‐P2VP₁₁₅ (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT₂₃‐b‐P2VP₁₁₅ resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT₂₃‐b‐P2VP₁₁₅ unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L_w/L_n <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio.     

Higher α‐olefin polymerizations catalyzed by rac‐Me2Si(1‐C5H2‐2‐CH3‐4‐tBu)2Zr(NMe2)2/Al(iBu)3/[Ph3C][B(C6F5)4]

Polymerizations of higher α‐olefins, 1‐pentene, 1‐hexene, 1‐octene, and 1‐decene were carried out at 30 °C in toluene by using highly isospecific rac‐Me₂Si(1‐C₅H₂‐2‐CH₃‐4‐^t Bu)₂Zr(NMe₂)₂ (rac‐1) compound in the presence of Al(iBu)₃/[CPh₃][B(C₆F₅)₄] as a cocatalyst formulation. Both the bulkiness of monomer and the lateral size of polymer influenced the activity of polymerization. The larger lateral of polymer chain opens the π‐ligand of active site wide and favors the insertion of monomer, while the large size of monomer inserts itself into polymer chain more difficultly due to the steric hindrance. Highly isotactic poly(α‐olefin)s of high molecular weight (MW) were produced. The MW decreased from polypropylene to poly(1‐hexene), and then increased from poly(1‐hexene) to poly(1‐decene). The isotacticity (as [mm] triad) of the polymer decreased with the increased lateral size in the order: poly(1‐pentene) > poly(1‐hexene) > poly(1‐octene) > poly(1‐decene). The similar dependence of the lateral size on the melting point of polymer was recorded by differential scanning calorimetry (DSC). ¹H NMR analysis showed that vinylidene group resulting from β‐H elimination and saturated methyl groups resulting from chain transfer to cocatalyst are the main end groups of polymer chain. The vinylidene and internal double bonds are also identified by Raman spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1687–1697, 2000     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Design of water-soluble block copolymers containing poly(4-vinylpyridine) by atom transfer radical polymerization

The preparation of block copolymers consisting of poly(4-vinylpyridine) (P4VP) by atom transfer radical polymerization (ATRP) was investigated. The goal was to synthesize water-soluble block copolymers with poly(ethylene oxide) (PEO) as first block, a water-soluble polymer at any pH. First, a PEO macroinitiator was prepared for the ATRP block copolymerization of 4-vinylpyridine. In the second stage, the kinetic behaviour of this block copolymerization was investigated for two different types of PEO-macroinitiators and catalyst systems, based on CuCl or CuCl₂/Cu(0), with tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as the ligand. Various combinations of initiator and catalyst led to a controlled block copolymerization with optimized results obtained for chlorinated poly(ethylene glycol) monomethyl ether as macroinitiator, together with CuCl₂/Cu(0)/Me₆-TREN as catalyst system. With the latter system, narrow polydispersities (1.25) could be reached for PEO-P4VP block copolymers.     

Self‐organization and luminescent properties of nanostructured europium (III)–block copolymer complex thin films

We introduce a simple method to create nanosized, ordered, and highly luminescent thin film of Eu (III)–block copolymer complex. Micelles of polystyrene–block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) in P4VP‐selective solvents (ethanol/N,N‐dimethylformamide (DMF) mixture) serve as nanoreactors for the synthesis of Eu(III)–block copolymer complex with the presence of 1,10‐phenanthroline (Phen) as cooperative ligand. The resulted quaternary complexes were characterized by FT‐IR spectra, ¹⁵N NMR spectra, and elemental analysis, indicative of a composition of Eu(III)–(PS‐b‐P4VP)–Phen–5DMF. Atomic force microscopy and transmission electron microscopy investigations reveal that the Eu(III)–(PS‐b‐P4VP)–Phen–5DMF complex can self‐organize into hexagonally ordered thin films when dip‐coated from the solution onto silicon or silica glass substrates. Such ordered thin films can emit red fluorescence of Eu³⁺ with strong intensity and long lifetime. This method can be easily extended to prepare other ordered luminescent rare earth–polymer complexes thin films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2181–2189, 2005