Reactivity of calix-tetrapyrrole SmII and SmIII complexes with acetylene: isolation of an "N-confused" calix-tetrapyrrole ring

The nature of the substituents present on the calix-tetrapyrrole tetra-anion ligand [[R2C(C4H2N)]4]4- (R = [-(CH2)5-]0.5, Et) determines the type of reactivity of the corresponding SmII compounds with acetylene. With R = [-(CH2)5-]0.5, dehydrogenation occurred to yield the nearly colorless dinuclear diacetylide complex [[[[-(CH2)5-]4-calix-tetrapyrrole]SmIII]2(mu-C2Li4)].THF as the only detectable reaction product. Conversely, with R = Et, acetylene coupling in addition to dehydrogenation resulted in the formation of a dimeric butatrienediyl enolate derivative [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu-OCH=CH2)]]2(mu,eta2,eta'2-HC=C=C=CH)]. Reaction of the trivalent hydride [(Et8-calix-tetrapyrrole)(thf)SmIII[(mu-H)[Li(thf)]]2 or of the terminally bonded methyl derivative [(Et8-calix-tetrapyrrole)(CH3)SmIII[[Li(thf)]2[Li(thf)2](mu3-Cl)]] with acetylene resulted in a mixture of the carbide [[(Et8-calix-tetrapyrrole)SmIII]2(mu-C2Li4)].Et2O with the dimerization product [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu3-OCH=CH2)]]2-mu,eta2,eta'2-HC=C=C=CH)]. The same reaction also yielded a third product, a trivalent complex [[(Et8-calix-tetrapyrrole)SmIII[Li(thf)2]]2], in which the macrocycle was isomerized by shifting the ring attachment of one of the four pyrrole rings.     

Reactions of fullerenes with reactive methylene organophosphorus reagents: efficient synthesis of organophosphorus group substituted C60 and C70 derivatives

Treatment of C70 with cycloalkylaminomethylenebisphosphonates in the presence of NaH gave corresponding C70 dimers 1 in good yield, while the methanofullerenes, C70>CH(PO3Et2) (3) and C70>C(PO3Et2)2 (4) or C60>CH(PO3Et2) (5) and C60>C(PO3Et2)2 (6), were obtained, respectively, by the reaction of C70 or C60 with tetraethyl methylenediphosphonate in the presence of NaH. Diethyl cyanomethylphosphonate reacted with C60 or C70 under similar conditions to afford C60>C(PO3Et2)CN (7) and C70>C(PO3Et2)CN (8). Furthermore, the presence of weak electronic interactions between two fullerene cages of fullerene dimers was demonstrated by cyclic voltammetry. A radical mechanism was proposed for the formation of the fullerene derivatives on the basis of the ESR studies.     

Synthesis of N-heterocyclic carbene rhenium(I) carbonyl complexes

Reaction of aminophosphinimine [RHN(CH(2))(2)N[double bond, length as m-dash]PPh(3)] (R = H, Et) with Re(2)(CO)(10) provided the NH-functionalized carbene rhenium complex [Re(2)(CNHCH(2)CH(2)NR)(CO)(9)] (3a, R = H, 3b, R = Et). Treatment of 3 with Br(2) provided the mono nuclear [Re(CNHCH(2)CH(2)NR)(CO)(4)Br] (1, R = H, 2, R = Et). However, NH-functionalized carbene complexes 1-3 did not undergo N-alkylation with alkyl halides to yield the N-substituted NHC complexes. The direct ligand substitution of [Re(CO)(5)Br] with a carbene donor was employed to prepare [Re(IMes(2))(CO)(4)Br] (6a, IMes(2) = 1,3-di-mesitylimidazol-2-ylidene; 6b, IMes(2) = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene). Analyses of spectroscopic and crystal data of 6a and 6b show similar corresponding data among these complexes, suggesting the saturated and unsaturated NHCs have similar bonding with Re(I) metal centers. Reduction of 6a and 6b with LiEt(3)BH yielded the corresponding hydrido complexes 7a-b [ReH(CO)(4)(IMes(2))], but not 1 and 2. Ligand substitution of 1, 6a and 6b toward 2,2'-bipyridine (bipy) was investigated. Crystal structures of 1, 3a-b, 6a-b and 7b were determined for characterization and comparison.     

1,4-dicyanobenzene as a scaffold for the preparation of bimetallic actinide complexes exhibiting metal-metal communication

Reaction of two equivalents of [(C(5)Me(4)Et)(2)U(CH(3))(Cl)] (6) or [(C(5)Me(5))(2)Th(CH(3))(Br)] (7) with 1,4-dicyanobenzene leads to the formation of the novel 1,4-phenylenediketimide-bridged bimetallic organoactinide complexes [{(C(5)Me(4)Et)(2)(Cl)U}(2)(mu-{N==C(CH(3))-C(6)H(4)-(CH(3))C==N})] (8) and [{(C(5)Me(5))(2)(Br)Th}(2)(mu-{N==C(CH(3))-C(6)H(4)- (CH(3))C==N})] (9), respectively. These complexes were structurally characterized by single-crystal X-ray diffraction and NMR spectroscopy. Metal-metal interactions in these isovalent bimetallic systems were assessed by means of cyclic voltammetry, UV-visible/NIR absorption spectroscopy, and variable-temperature magnetic susceptibility. Although evidence for magnetic coupling between metal centers in the bimetallic U(IV)/U(IV) (5f(2)-5f(2)) complex is ambiguous, the complex displays appreciable electronic communication between the metal centers through the pi system of the dianionic diketimide bridging ligand, as judged by voltammetry. The transition intensities of the f-f bands for the bimetallic U(IV)/U(IV) system decrease substantially compared to the related monometallic ketimide chloride complex, [(C(5)Me(5))(2)U(Cl){-N==C(CH(3))-(3,4,5-F(3)-C(6)H(2))}] (11). Also reported herein are new synthetic routes to the actinide starting materials [(C(5)Me(4)Et)(2)U(CH(3))(Cl)] (6) and [(C(5)Me(5))(2)Th(CH(3))(Br)] (7) in addition to the syntheses and structures of the monometallic uranium complexes [(C(5)Me(4)Et)(2)UCl(2)] (3), [(C(5)Me(4)Et)(2)U(CH(3))(2)] (4), [(C(5)Me(4)Et)(2)U{-N==C(CH(3))-C(6)H(4)-C==N}(2)] (10), and 11.     

Reaction of Mo(CO)_6 with Alkoxide: Synthesis and Structure of the Mo(0)-OR Complex [Et_4N]_3[Mo_2(CO)_6(μ-OC_6H_4OCH_2C_6H_5)_3]

The reaction of molybdenum hexacarbonyl with C6H5CH2OC6H4ONa and Et4NBr in CH3CN at 60 ℃ afforded the di-nuclear Mo(0) compound [Et4N]3[Mo2(CO)6(μ-OC6H4OCH2- C6H5)3] 1. 1 crystallizes in monoclinic, space group P21/c with a = 15.359(2), b = 18.378(3), c = 24.952(2), β = 102.268(4)°, V = 6882.3(16) 3, Mr = 1348.34, Z = 4, Dc = 1.301 g/cm3, F(000) = 2832 and μ = 0.424 mm-1. The final R = 0.0606 and wR = 0.1552 for 9396 observed reflections (I > 2σ(I)). 1 contains a [Mo2O3]3- core in triangular bi-pyramidal configuration and each Mo atom adopts a distorted octahedral geometry with three carbon atoms from carbonyls and three μ-O atoms from C6H5CH2OC6H4O- bridging ligands. The Mo…Mo distance is 3.30(8) , indicating no metal- metal bonding. A formation pathway via forming a di-molybdenum(0) di-bridging OR compound [Mo2(μ-OR)2(CO)8]2- has been figured out and the reaction of Mo(CO)6 with alkoxide has also been discussed.     

N-对R苯基氮杂15冠5八钼多酸钠超分子配合物的合成与结构

为研究大环化合物对客体分子的选择性, 合成了通式为[NaL(Et2O)]2Na2Mo8O26的三种新型N-对R苯基氮杂15冠5八钼多酸钠超分子配合物(其中L分别为: N-苯基氮杂15冠5、N-对氯苯基氮杂15冠5和N-对甲苯基氮杂15冠5), 进行了元素分析, 红外光谱与核磁共振等结构参数的表征, 对R基为CH3的标题配合物作了X射线四圆衍射测定, 该晶体属单斜晶系, 空间群为P21/a,a=1.4590(4)nm, b=1.3817(3)nm, c=1.7639(5)nm, β=112.67(2)°, V=3.281(1)nm^3, Mr=2021.3, Dc=2.11g/cm^3,μ=2.37mm^-^1, F(000)=2048, R=0.045和Rw=0.057, 与[Na.(DB18C6)(CH3OH)M6O19和[Na(DB24C8)]2M6O19进行比较,结果表明: 大环化合物不仅对客体金属离子有分子识别性, 而且对与之抗衡的多酸阴离子也具有影响。     

Molecular precursors to gallium oxide thin films

The donor-functionalised alkoxides [Et(2)Ga(OR)](2)(R = CH(2)CH(2)NMe(2)(1), CH(CH(2)NMe(2))(2)(2), CH(2)CH(2)OMe (3), CH(CH(3))CH(2)NMe(2)(4), C(CH(3))(2)CH(2)OMe (5)) were synthesised by the 1:1 reaction of Et(3)Ga with ROH in hexane or dichloromethane at room temperature. Reaction of Et(3)Ga with excess ROH in refluxing toluene resulted in the isolation of a 1:1 mixture of [Et(2)Ga(OR)](2) and the ethylgallium bisalkoxide [EtGa(OR)(2)](R = CH(2)CH(2)NMe(2)(6) or CH(CH(3))CH(2)NMe(2)(7)). X-ray crystallography showed that compound 6 is monomeric and this complex represents the first structurally characterised monomeric gallium bisalkoxide. Homoleptic gallium trisalkoxides [Ga(OR)(3)](2) were prepared by the 1:6 reaction of [Ga(NMe(2))(3)](2) with ROH (R = CH(2)CH(2)NMe(2)(8), CH(CH(3))CH(2)NMe(2)(9), C(CH(3))(2)CH(2)OMe (10)). The decomposition of compounds 1, 4, 5 and 8 were studied by thermal gravimetric analysis. Low pressure CVD of 1 and 5 resulted in the formation of thin films of crystalline Ga(2)O(3).     

5-Organyl-5-phosphaspiro[4.4]nonanes: a contribution to the structural chemistry of spirocyclic tetraalkylphosphonium salts and pentaalkylphosphoranes

Spirocyclic phosphonium salts of the type [(CH(2))(4)P(CH(2))(4)](+) X(-) with X = I(3) (1a), I (1b), picrate (1c), benzoate (1d), and Cl (1e) were prepared from 1,4-diiodobutane and elemental phosphorus followed by metathesis reactions. The crystal structures of 1b and 1c and of 1d(H(2)O) have been determined by X-ray diffraction methods. In the cations of these salts the phosphorus atoms are shared by two five-membered rings in envelop conformations. In the picrate 1c the cations show an unsymmetrical ring folding pattern (point group C(1)), while the geometry of the cations of the iodide 1b and the benzoate hydrate [1d(H(2)O)] approaches the symmetry of point group C(2). These structures can be taken as models for the as yet unknown molecular geometries of the corresponding hydrocarbon (CH(2))(4)C(CH(2))(4) and silane (CH(2))(4)Si(CH(2))(4). Treatment of 1e with organolithium reagents RLi affords spirocyclic pentaorganophosphoranes RP[(CH(2))(4)](2) with R = Me, Et, n-Bu, Vi, and Ph (2a-e) in good (R = Me, Et, n-Bu) to low yields (R = Vi, Ph). The products are isolated as colorless liquids, of which only 2a, 2b, and 2d can be distilled without decomposition. Single crystals of 2a were obtained by low-temperature in situ crystal growth. The molecule has a trigonal bipyramidal configuration with the methyl group in an equatorial position and the two five-membered rings spanning axial/equatorial positions of the polyhedron. Deviations from the standard trigonal bipyramidal geometry are small. The compounds 2a-e are fluctional in solution as demonstrated by NMR spectroscopy.     

Reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with Alkyl Halides and Dihalides: Formation of the Alkyl- and the Dialkylantimony-Iron Carbonyl Complexes

The reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] (1) with RX (R = Me, Et, n-Pr; X = I) in MeCN form the monoalkylated antimony complexes [Et(4)N](2)[RSb{Fe(CO)(4)}(3)] (R = Me, 2; R = Et, 4; R = n-Pr, 6) and the dialkylated antimony clusters [Et(4)N][R(2)Sb{Fe(CO)(4)}(2)] (R = Me, 3; R = Et, 5; R = n-Pr, 7), respectively. When [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] reacts with i-PrI, only the monoalkylated antimony complex [Et(4)N](2)[i-PrSb{Fe(CO)(4)}(3)] (8) is obtained. The mixed dialkylantimony complex [Et(4)N][MeEtSb{Fe(CO)(4)}(2)] (9) also can be synthesized from the reaction of 2 with EtI. While the reaction with Br(CH(2))(2)Br produces [Et(4)N](2)[BrSb{Fe(CO)(4)}(3)] (10), treatment with Cl(CH(2))(3)Br forms the monoalkylated product [Et(4)N](2)[Cl(CH(2))(3)Sb{Fe(CO)(4)}(3)] (11) and a dialkylated novel antimony-iron complex [Et(4)N][{&mgr;-(CH(2))(3)}Sb{Fe(CO)(4)}(3)] (12). On the other hand, the reaction with Br(CH(2))(4)Br forms the monoalkylated antimony product and the dialkylated antimony complex [Et(4)N][{&mgr;-(CH(2))(4)}Sb{Fe(CO)(4)}(2)] (13). Complexes 2-13 are characterized by spectroscopic methods or/and X-ray analyses. On the basis of these analyses, the core of the monoalkyl clusters consists of a central antimony atom tetrahedrally bonded to one alkyl group and three Fe(CO)(4) fragments and the dialkyl products are structurally similar to the monoalkyl clusters, with the central antimony bonded to two alkyl groups and two Fe(CO)(4) moieties in each case. The dialkyl complex 3 crystallizes in the monoclinic space group P2(1)/c with a = 13.014(8) ?, b = 11.527(8) ?, c = 17.085(5) ?, beta = 105.04(3) degrees, V = 2475(2) ?(3), and Z = 4. Crystals of 12 are orthorhombic, of space group Pbca, with a = 14.791(4) ?, b = 15.555(4) ?, c = 27.118(8) ?, V = 6239(3) ?(3), and Z = 8. The anion of cluster 12 exhibits a central antimony atom bonded to three Fe(CO)(4) fragments with a -(CH(2))(3)- group bridging between the Sb atom and one Fe(CO)(4) fragment. This paper discusses the details of the reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with a series of alkyl halides and dihalides. These reactions basically proceed via a novel double-alkylation pathway, and this facile methodology can as well provide a convenient route to a series of alkylated antimony-iron carbonyl clusters.     

Cobalt-catalyzed highly regio- and stereoselective intermolecular reductive coupling of alkynes with conjugated alkenes

In the presence of Co(PPh3)2I2, PPh3, water, and zinc powder, the reaction of alkynes (R1CCR2: R1 = Ph, R2 = Me (1a); R1 = Ph, R2 = Ph (1b); R1 = Et, R2 = Et (1c); R1 = Ph, R2 = (CH2)3OH (1d); R1 = CO2Et, R2 = Ph (1e); R1 = CO2Me, R2 = (CH2)4CH3 (1f); R1 = CO2Et, R2 = SiMe3 (1g)) with alkenes having an electron-withdrawing substituent (CH2=CHR: R = CO2Bu (2a), CN (2b), SO2Ph (2c) and CO2Me (2d)) proceeded smoothly in acetonitrile to give the corresponding reductive coupling products (R1HC=CR2CH2CH2R, 3a-j) in fair to excellent yields. This reductive coupling is highly regio- and stereoselective; only one isomer was observed for each reaction. The results of an isotope-labeling experiment using D2O (99%) to replace normal water for the reductive coupling of vinyl phenyl sulfone 2c with alkyne 1a revealed that the product is E-Ph(D)C=CMeCH2CH(D)SO2Ph deuterated at the olefinic proton and one of the protons of the alpha-methylene group in 84 and 96%, respectively. Possible mechanisms for this highly regio- and stereoselective ene-yne catalytic reaction are proposed.     

Regioselective nucleophilic addition of triphenylphosphine to the nitrosylruthenium alkynyl complexes having a hydrotris(pyrazol-1-yl)borate: formation of phosphonio-alkenyl, alkynyl, and allenyl species

A nitrosylruthenium alkynyl complex of TpRuCl(C[triple bond]CPh)(NO)(1a) was reacted with PPh3 in the presence of HBF4.Et2O at room temperature to give a beta-phosphonio-alkenyl complex (E)-[TpRuCl{CH=C(PPh3)Ph}(NO)]BF4(2.BF4). On the other hand, for gamma-hydroxyalkynyl complexes TpRuCl{C[triple bond]CC(R)2OH}(NO)(R = Me (1b), Ph (1c), H (1d)), similar treatments with PPh3 were found to give gamma-phosphonio-alkynyl [TpRuCl{C[triple bond]CC(Me)2PPh3}(NO)]BF4(3.BF4),alpha-phosphonio-allenyl [TpRuCl{C(PPh3)=C=CPh2}(NO)]BF4(4.BF4), and a novel product of gamma-hydroxy-beta-phosphonio-alkenyl (E)-[TpRuCl{CH=C(PPh3)CH2OH}(NO)]BF4(5.BF4), respectively. Dominant factors for the selectivity in affording 3-5 were associated with the steric congestion and electronic properties at the gamma-carbons, along with those around the metal fragment. From the bis(alkynyl) complex TpRu(C[triple bond]CPh)2(NO)6, a bis(beta-phosphonio-alkenyl)(E,E)-[TpRu{CH=C(PPh3)Ph}2(NO)](BF4)2{7.(BF4)2} was produced at room temperature. However, similar reactions at 0 degrees C gave an alkynyl beta-phosphonio-alkenyl complex (E)-[TpRu(C[triple bondCPh){CH=C(PPh3)Ph}(NO)]BF4(8.BF4) as a sole product, of which additional hydration in the presence of HBF4.Et2O afforded a [small beta]-phosphonio-alkenyl ketonyl (E)-[TpRu{CH2C(O)Ph}{CH=C(PPh3)Ph}(NO)]BF(.9BF4). Five complexes, 2-5 and 7 were crystallographically characterized.     

Amidines derived from Pt(IV)-mediated nitrile-amino alcohol coupling and their Zn(II)-catalyzed conversion into oxazolines

The reaction between the platinum(IV) complex trans-[PtCl(4)(EtCN)(2)] and the amino alcohols NH(2)CH(2)CH(2)OH, NH(2)CH(2)CH(Me)OH-(R)-(-), NH(2)CH(Ph)CH(2)OH-(R)-(-), NH(2)CH(Et)CH(2)OH-(R)-(-), NH(2)CH(Et)CH(2)OH-(S)-(+), and NH(2)CH(Pr(n)())CH(2)OH proceeds rapidly at room temperature in CH(2)Cl(2) to furnish the amidine complexes [PtCl(4)(HN=C(Et)NH(arcraise;)OH)(2)] (1-6) in good yield (70-80%). The related reaction between the platinum(II) complex trans-[PtCl(2)(EtCN)(2)] and monoethanolamine in a molar ratio of 1:2 in CH(2)Cl(2) results in the addition of 4 equiv of NH(2)CH(2)CH(2)OH per mole of complex to give [Pt(HN=C(Et)NHCH(2)CH(2)OH)(2)(NH(2)CH(2)CH(2)OH)(2)](2+) (7). Formulation of 1-6 is based upon satisfactory C, H, N elemental analyses, electrospray mass spectrometry, IR spectroscopy, and (1)H, (13)C((1)H), (15)N, and (195)Pt NMR spectroscopies, while the structures of trans-[PtCl(4)((Z)-NH=C(Et)NHCH(2)CH(2)OH)(2)] (1), trans-[PtCl(4)((Z)-NH=C(Et)NHCH(2)CH(Me)OH-(R)-(-))(2)] (2), and trans-[PtCl(4)((Z)-NH=C(Et)NHCH(Et)CH(2)OH-(R)-(-))(2)] (4) were determined by X-ray single-crystal diffraction. The Z-amidine configuration of the ligands is preserved in CDCl(3) solutions as confirmed by gradient-enhanced (15)N,(1)H-HMQC spectroscopy and NOE experiments. The amidines, formed upon Pt(IV)-mediated nitrile-amino alcohol coupling, were liberated from their platinum(IV) complexes 1, 3, and 4 by reaction with Ph(2)PCH(2)CH(2)PPh(2) (dppe) giving free NH=C(Et)NHCHRCH(2)OH (R = H 8, Et 9, Ph 10), with the substituents R of different types, and dppe oxides; the P-containing species were identified by (31)P((1)H) NMR spectroscopy. NOESY spectroscopy indicates that the liberated amidines retained the same configuration relative to the C=N double bond, i.e., syn-(H,Et)-NH=C(Et)NHCHRCH(2)OH. The liberated hydroxo-functionalized amidines 8-10 were converted into oxazolines (11-13) in the presence of a catalytic amount of ZnCl(2). A similar catalytic effect has also been reached using anhydrous MSO(4) (M = Cu, Co, Cd), CdCl(2), and AlCl(3).     

Nitrile-amidine coupling at Pt(IV) and Pt(II) centers. An easy entry to imidoylamidine complexes

Treatment of trans-[PtCl4(RCN)2] (R = Me, Et, Ph, NEt2) with 2 equiv of the amidine PhC(=NH)NHPh in a suspension of MeCN (R = Me), CHCl3 (R = Et, Ph), or in CHCl3 solution (R = NEt2) results in the formation of the imidoylamidine complexes trans-[PtCl4{NH=C(R)N=C(Ph)NHPh}2] (1-4) isolated in good yields (66-84%). The reaction of soluble complexes 3 and 4 with 2 equiv of Ph3P=CHCO2Me in CH2Cl2 (40 degrees C, 5 h) leads to dehydrochlorination resulting in a chelate ring closure to furnish the platinum(IV) chelates [PtCl2{NH=C(R)NC(Ph)=NPh}2] (R = Ph, 5; R = NEt2, 6), accordingly, and the phosphonium salt [Ph3PCH2CO2Me]Cl. Treatment of 5 with 3 equiv of Ph3P=CHCO2Me at 50 degrees C for 5 d resulted in only a 30% conversion to the corresponding Pt(II) complex [Pt{NH=C(NEt2)NC(Ph)=NPh}2] (15). The reduction can be achieved within several minutes, when Ph2PCH2CH2PPh2 in CDCl3 is used. When the platinum(II) complex trans-[PtCl2(RCN)2] is reacted with 2 equiv of the amidine, the imidoylamidinato complexes [PtCl(RCN){NH=C(R)NC(Ph)=NHPh}] (8-11) and [PhC(=NH)NHPh] x HCl (7) are formed. The reaction of trans-[PtCl2(RCN)2] with 4 equiv of the amidine under a prolonged reaction time or treatment of [PtCl(RCN){NH=C(R)NC(Ph)=NHPh}] (8-11) with 2 more equiv of the amidine yields the complex bearing two chelate rings [Pt{NH=C(R)NC(Ph)=NHPh}2] (12-15). The treatment of cis-[PtCl2(RCN)2] (R = Me, Et) with the amidine gives ca. 50-60% yield of [PtCl2{NH=C(R)NHC(Ph)=NHPh}] (16 and 17). All of the platinum compounds were characterized by elemental analyses; FAB mass spectrometry; IR spectroscopy; 1H, 13C{1H}, and 195Pt NMR spectroscopies, and four of them (4, 6, 8, and 15) were also characterized by X-ray crystallography. The coupling of the Pt-bound nitriles and the amidine is metal-mediated insofar as RCN and PhC(=NH)NHPh do not react in the absence of the metal centers in conditions more drastic than those of the observed reactions. The nitrile-amidine coupling reported in this work constitutes a route to the synthesis of imidoylamidine complexes, some of them exhibiting luminescent properties.     

Synthesis and characterisation of benzyl phosphino-thioether and -thiolato Pd(II) complexes and their applications in Suzuki coupling reactions

The synthesis of the benzyl phosphinothioether derivatives Ph(2)PCH(2)CH(Et)SR and their corresponding palladium complexes are reported, where R = CH(2)Ph, R = CH(2)-3,5-Me-C(6)H(3) and R = 1-CH(2)C(10)H(7)(5). Crystallographic data obtained for the complexes Pd(3)Cl(2) and Pd(4)Cl(2) show intra- and inter-molecular pi-pi interactions between the aromatic rings on the P and S substituents, and NOE experiments for Pd(4)Cl(2) show that these interactions persist in solution. The performance of the phosphinothioether palladium complexes in aryl-aryl cross-coupling reactions is compared with that of the corresponding complex of the parent phosphinothiolato ligand Ph(2)PCH(2)CH(Et)S(-)(1). High turnover numbers up to 2000000 are reported for the coupling of bromobenzene, using the palladium dimer [Pd(1)I](2) as the catalyst precursor. Kinetic studies show a linear dependence of the reaction on catalyst loading. The effect of other variables on the cross-coupling reaction, such as temperature, solvent and base, is also reported.     

固-液相转移催化合成V.醛亚胺的michael加成和羰基加成反应合成α-氨基 酸

报道了在以K~2CO~2为固体碱的固-液相转移催化条件下,用醛亚胺与亲电的 烯烃和醛类化合物进行Michael加成,羰基加成反应,合成了一系列醛亚胺亲核加成产物.并通过水解羰基加成产物制备了一系列丝氨酸衍生物.该法简便,温和,反应时间短,产率高,是合成具有取代基的甘氨酸,丙氨酸和丝氨酸及其酯的一种有用方法.     

Kinetic and mechanistic study of the Pt(II) versus Pt(IV) effect in the platinum-mediated nitrile-hydroxylamine coupling

The metal-mediated coupling between coordinated EtCN in the platinum(II) and platinum(IV) complexes cis- and trans-[PtCl(2)(EtCN)(2)], trans-[PtCl(4)(EtCN)(2)], a mixture of cis/trans-[PtCl(4)(EtCN)(2)] or [Ph(3)PCH(2)Ph][PtCl(n)(EtCN)] (n = 3, 5), and dialkyl- and dibenzylhydroxylamines R(2)NOH (R = Me, Et, CH(2)Ph, CH(2)C(6)H(4)Cl-p) proceeds smoothly in CH(2)Cl(2) at 20-25 degrees C and the subsequent workup allowed the isolation of new imino species [PtCl(n){NH=C(Et)ONR(2)}(2)] (n = 2, R = Me, cis-1 and trans-1; Et, cis-2 and trans-2; CH(2)Ph, cis-3 and trans-3; CH(2)C(6)H(4)Cl-p, cis-4 and trans-4; n = 4, R = Me, trans-9; Et, trans-10; CH(2)Ph, trans-11; CH(2)C(6)H(4)Cl-p, trans-12) or [Ph(3)PCH(2)Ph][PtCl(n){NH=C(Et)ONR(2)}] (n = 3, R = Me, 5; Et, 6; CH(2)Ph, 7; CH(2)C(6)H(4)Cl-p, 8; n = 5, R = Me, 13; Et, 14; CH(2)Ph, 15; CH(2)C(6)H(4)Cl-p, 16) in excellent to good (95-80%) isolated yields. The reduction of the Pt(IV) complexes 9-16 with the ylide Ph(3)P=CHCO(2)Me allows the synthesis of Pt(II) species 1-8. The compounds 1-16 were characterized by elemental analyses (C, H, N), FAB-MS, IR, (1)H, (13)C{(1)H}, and (31)P{(1)H} NMR (the latter for the anionic type complexes 5-8 and 13-16) and by X-ray crystallography for the Pt(II) (cis-1, cis-2, and trans-4) and Pt(IV) (15) species. Kinetic studies of addition of R(2)NOH (R = CH(2)C(6)H(4)Cl-p) to complexes [Ph(3)PCH(2)Ph][Pt(II)Cl(3)(EtCN)] and [Ph(3)PCH(2)Ph][Pt(IV)Cl(5)(EtCN)] by the (1)H NMR technique revealed that both reactions are first order in (p-ClC(6)H(4)CH(2))(2)NOH and Pt(II) or Pt(IV) complex, the second-order rate constant k(2) being three orders of magnitude larger for the Pt(IV) complex. The reactions are intermolecular in nature as proved by the independence of k(2) on the concentrations of added EtC triple bond N and Cl(-). These data and the calculated values of Delta H++ and Delta S++ are consistent with the mechanism involving the rate-limiting nucleophilic attack of the oxygen of (p-ClC(6)H(4)CH(2))(2)NOH at the sp-carbon of the C triple bond N bond followed by a fast proton migration.     

Synthesis,molecular structure,and C-C coupling reactions of carbeneruthenium(II) complexes with C5H5Ru(=CRR') and C5Me5Ru(=CRR') as molecular units

The ethene derivatives [(eta(5)-C(5)R(5))RuX(C(2)H(4))(PPh(3))] with R=H and Me, which have been prepared from the eta(3)-allylic compounds [(eta(5)-C(5)R(5))Ru(eta(3)-2-MeC(3)H(4))(PPh(3))] (1, 2) and acids HX under an ethene atmosphere, are excellent starting materials for the synthesis of a series of new halfsandwich-type ruthenium(II) complexes. The olefinic ligand is replaced not only by CO and pyridine, but also by internal and terminal alkynes to give (for X=Cl) alkyne, vinylidene, and allene compounds of the general composition [(eta(5)-C(5)R(5))RuCl(L)(PPh(3))] with L=C(2)(CO(2)Me)(2), Me(3)SiC(2)CO(2)Et, C=CHCO(2)R, and C(3)H(4). The allenylidene complex [(eta(5)-C(5)H(5))RuCl(=C=C=CPh(2))(PPh(3))] is directly accessible from 1 (R=H) in two steps with the propargylic alcohol HC triple bond CC(OH)Ph(2) as the precursor. The reactions of the ethene derivatives [(eta(5)-C(5)H(5))RuX(C(2)H(4))(PPh(3))] (X=Cl, CF(3)CO(2)) with diazo compounds RR'CN(2) yield the corresponding carbene complexes [(eta(5)-C(5)R(5))RuX(=CRR')(PPh(3))], while with ethyl diazoacetate (for X=Cl) the diethyl maleate compound [(eta(5)-C(5)H(5))RuCl[eta(2)-Z-C(2)H(2)(CO(2)Et)(2)](PPh(3))] is obtained. Halfsandwich-type ruthenium(II) complexes [(eta(5)-C(5)R(5))RuCl(=CHR')(PPh(3))] with secondary carbenes as ligands, as well as cationic species [(eta(5)-C(5)H(5))Ru(=CPh(2))(L)(PPh(3))]X with L=CO and CNtBu and X=AlCl(4) and PF(6), have also been prepared. The neutral compounds [(eta(5)-C(5)H(5))RuCl(=CRR')(PPh(3))] react with phenyllithium, methyllithium, and the vinyl Grignard reagent CH(2)=CHMgBr by displacement of the chloride and subsequent C-C coupling to generate halfsandwich-type ruthenium(II) complexes with eta(3)-benzyl, eta(3)-allyl, and substituted olefins as ligands. Protolytic cleavage of the metal-allylic bond in [(eta(5)-C(5)H(5))Ru(eta(3)-CH(2)CHCR(2))(PPh(3))] with acetic acid affords the corresponding olefins R(2)C=CHCH(3). The by-product of this process is the acetato derivative [(eta(5)-C(5)H(5))Ru(kappa(2)-O(2)CCH(3))(PPh(3))], which can be reconverted to the carbene complexes [(eta(5)-C(5)H(5))RuCl(=CR(2))(PPh(3))] in a one-pot reaction with R(2)CN(2) and Et(3)NHCl.     

Addition products of a P(III)-isothiocyanate to dialkyl acetylenedicarboxylates: a spirocyclic phosphinimine and a triphosphorus heterocycle with tetra- and penta-coordinate phosphorus

Treatment of the P(III) isothiocyanate CH2[6-t-Bu-4-Me-C6H2O]2PNCS (1) with dimethyl acetylenedicarboxylate (DMAD) or diethyl acetylenedicarboxylate (DEAD) yields the spirocyclic phosphinimines CH2[6-t-Bu-4-Me-C6H2O]2P[NC(S)C(CO2R)C(CO2R)][R=Me (2), Et (3)], in a reaction unlike those of organic isocyanates. From the reaction of 1 with DEAD, a second product, the triphosphorus compound 5, with the composition [2x1+3] but with a completely reorganized structure {CH2[6-t-Bu-4-Me-C6H2O]2P=C(CO2Et)C(CO2Et)=CN-}{CH2[6-t-Bu-4-Me-C6H2O]2P(NCS)}-SC=N-P(S)[(OC6H2-6-t-Bu-4-Me)2CH2] with tetra- and penta-coordinate phosphorus, is also isolated. Structure and reactivity of these compounds are discussed. Addition of 2,2,2-trifluoroethanol to 2 or 3 leads to the pentacoordinate phosphorus compounds [CH2(6-t-Bu-4-Me-C6H2O)2P(OCH2CF3){C(CO2R)C(CO2R)-C(S)-NH-}][R=Me (6), Et (7)]. The phosphonate [CH2(6-t-Bu-4-Me-C6H2O)2P(O)C(CO2Et)=C(CO2Et)-C(S)-NH2] (8) is obtained by evaporating a solution of 7 in open air.     

Syntheses, structures, and reactivity of new pentamethylcyclopentadienyl-rhodium(III) and -iridium(III) 4-acyl-5-pyrazolonate complexes

New [CpM(Q)Cl] complexes (M = Rh or Ir, Cp = pentamethylcyclopentadienyl, HQ = 1-phenyl-3-methyl-4R(C=O)-pyrazol-5-one in general, in detail HQ(Me), R = CH(3); HQ(Et), R = CH(2)CH(3); HQ(Piv), R = CH(2)-C(CH(3))(3); HQ(Bn), R = CH(2)-(C(6)H(5)); HQ(S), R = CH-(C(6)H(5))(2)) have been synthesized from the reaction of [CpMCl(2)](2) with the sodium salt, NaQ, of the appropriate HQ proligand. Crystal structure determinations for a representative selection of these [CpM(Q)Cl] compounds show a pseudo-octahedral metal environment with the Q ligand bonded in the O,O'-chelating form. In each case, two enantiomers (S(M)) and (R(M)) arise, differing only in the metal chirality. The reaction of [CpRh(Q(Bn))Cl] with MgCH(3)Br produces only halide exchange with the formation of [CpRh(Q(Bn))Br]. The [CpRh(Q)Cl] complexes react with PPh(3) in dichloromethane yielding the adducts CpRh(Q)Cl/PPh(3) (1:1) which exist in solution in two different isomeric forms. The interaction of [CpRh(Q(Me))Cl] with AgNO(3) in MeCN allows generation of [CpRh(Q(Me))(MeCN)]NO(3).3H(2)O, whereas the reaction of [CpRh(Q(Me))Cl] with AgClO(4) in the same solvent yields both [CpRh(Q(Me))(H(2)O)]ClO(4) and [CpRh(Cl)(H(2)O)(2)]ClO(4); the H(2)O molecules derive from the not-rigorously anhydrous solvents or silver salts.     

Desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes: monomer-dimer interconversion involving reversible thiol bridge formation

Two series of thiol-bridged dimeric desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes, [Et(4)N](2)[M(IV)(2)(SR)(2)(mnt)(4)] [M = Mo, R = (1) -Ph, (2) -CH(2)Ph, (3) -CH(2)CH(3), (4) -CH(2)CH(2)OH; M = W, R = (1a) -Ph, (2a) -CH(2)Ph, (3a) -CH(2)CH(3), (4a) -CH(2)CH(2)OH] and one monomeric desoxo complex, [Et(4)N](2)[WIV(SPh)(2)(mnt)(2)] (5a) are reported. These complexes are diamagnetic, and crystal structures of each of the complex (except 5a) exhibits a dimeric {M(IV)(2)(SR)(2)} core without any metal-metal bond where each metal atom possesses hexa coordination. The M-SR distance ranges from 2.437 to 2.484 Angstrom in molybdenum complexes and from 2.418 to 2.469 Angstrom in tungsten complexes. These complexes display Mo-S(R)-Mo angles ranging from 92.84 degrees to 96.20 degrees in the case of 1-4 and W-S(R)-W angles ranging from 91.20 degrees to 96.25 degrees in the case of 1a-4a. Interestingly, both the series of Mo(IV) and W(IV) dimeric complexes respond to an unprecedented interconversion between the dimer and the corresponding hexacoordinated monomer upon change of pH. This pH-dependent interconversion establishes the fact that even the pentacoordinated Mo(IV) and W(IV) bis(dithiolene) moieties are forced to dimerize; these can easily be reverted back to the corresponding monomeric complex, reflecting the utility of dithiolene ligand in stabilizing the Mo(IV)/W(IV) moiety in synthesized complexes similar to the active sites present in native proteins.