The phenomena of shock wave reflection — a review of unsolved problems and future research needs

Although the phenomenon of shock wave reflection was discovered more than a hundred years ago, active research related to this phenomenon still goes on in many countries in the world (e.g., Australia, Canada, China, Germany, Israel, Japan, Poland, Russia and United States of America). As a matter of fact the research activity increased so drastically in the past decade and a half that a special scientific meeting dedicated to better understanding the reflection phenomena of shock waves, namely The International Mach Reflection Symposium was initiated in 1981 and was held since then in the major research centers actively involved in the research of shock wave reflections. In the present paper the status of the research of the phenomenon of shock wave reflection will be discussed in general, and unresolved problems and future research needs will be pointed out.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Back to the Future? A Re-examination of the Aerodynamics of Flettner-Thom Rotors for Maritime Propulsion

The paper examines, by way of a 3-dimensional, unsteady-RANS analysis, the high-Reynolds-number turbulent flow normal to a cylinder rotating about its axis, thus continuing the re-evaluation of this flow configuration as a potential means of providing low-cost ship propulsion. Comparisons are made between the available experimental and LES data both for the bare cylinder, as employed in Flettner’s notable Atlantic crossing, and the variant advocated by Thom in which close-packed discs are distributed along the cylinder. Our results display close agreement with available experimental and LES data other than the results of Thom (1934). We conclude that the addition of discs by the latter led, at the relatively low Reynolds numbers of his experiments, to the boundary layer on the cylinder being thinned to a point at which the boundary layers became laminar or transitional, thus leading to higher lift coefficients than pertain in turbulent flow.     

FSI research in pipeline systems – A review of the literature

This paper provides a broad overview of the literature pertaining to the dynamic analysis of fluid-filled pipe systems considering fluid–structure interaction (FSI). Various types of models and simulation algorithms of different levels of sophistication are compared and their application range discussed. The effects of fluid parameters, structural properties, fluid–structure couplings and boundary conditions on the inherent and dynamic character of pipes conveying fluid are comprehensively compared and contrasted.     

Erratum to： A computational study of the wing-wing and wing-body interactions of a model insect

The corresponds address of the first author Xin Yu for the research paper ＂A computational study of the wing-wing and wing-body interactions of a model insect＂ published in Acta Mechanica Sinica （August 2009, Vol. 25, No. 4：421- 431） should be corrected as ＂Institute of Applied Physics and Computational Mathematics, 100191 Beijing, China＂. The author apologizes for the negligence in checking the print proof.     

Coupled thermoviscoelasticity: A way to the stress-strain analysis of polymeric industrial components?

Summary The general relations between stress-strain fields and temperature change field are reported for elastic and viscoelastic bodies, and the energy equation is derived for the Zener's solid. Simple experimental thermographie analyses allow the coupled thermoviscoelasticity theory to be evaluated when applied to the structural analysis of machine components made of dissipative materials.

---

Sommario Si presentano le relazioni generali tra i campi tensionali e deformabili ed il campo di variazione della temperatura nel caso di corpi elastici e viscoelastici, ricavando l'equazione dell'energia nel caso del Solido di Zenner. Semplici prove termografiche permettono di valutare l'applicabilità della teoria della termoviscoelasitcità accoppiata all'analisi strutturale di componenti di macchine realizzati con materiali dissipativi.

---

---

In conclusions, the author thinks that the introduced thermomechanical approach could be used satisfactorily in the structural analysis of viscoelastic units, on explicit condition that critical parameters could be controlled. In particular, an attempt to limit the environment influences and to improve the optical resolution of infrared systems (by means of a thermostatic chamber and of a microscope) is being planned. The aim is to start studying the temperature change field at the tip of a crack in a stressed continuum.     

Study of the inertial effect and the nonlinearities of?the?CRONE suspension based on the hydropneumatic technology

In this paper, we emphasize two main effects involved in the CRONE car suspension technology (CRONE: French acronym for Commande Robuste d??Ordre Non Entier). In a first time, we present the influence of the inductive or inertial effect of the pipes that links the different cells of the hydropneumatic car suspension. These components are mainly resistive and capacitive devices. Then, we analyze the nonlinear relations that link the hydraulic power variables (the flow and the pressure) of the hydraulic resistors and the hydropneumatic accumulators and we study the effect of the nonlinear terms on the car suspension response. Our study is based on the gamma RC arrangement developed in Altet et al. (In: Analysis and design of hybrid systems??proceedings of ADHS03, pp. 63?C68. Elsevier, Amsterdam, 2003) and Serrier et al. (In: Proceedings of IDETC/CIE 2005: ASME 2005 international design engineering technical conferences and computers and information in engineering conference, Long Beach, CA, USA, 24?C28 September 2005). In a second time, we focus only on the gamma RLC arrangement, introduced in Abi Zeid Daou et al. (Int. J. Electron. 96(12):1207?C1223, 2009). We show whether the parasite effect due to the pipes or the nonlinear RC components affect the system??s response. The simulation results show that neither the inertial effect caused by these parasite pipes of one meter length nor the use of the nonlinear resistors or the accumulators modifies the response of the gamma RC arrangement.     

A simple approach to detect the nonlocal effects in the static analysis of Euler–Bernoulli and Timoshenko beams

In this paper, the well-known Mohr analogy is applied to the computation of displacements and rotations of carbon nanotubes, and some simple formula is derived which allows the direct generalization of the Mohr theory to the nonlocal Euler–Bernoulli and Timoshenko beam theories. Finally, some examples show the effectiveness and simplicity of the proposed approach.     

A Physical Model of the Structure and Attenuation of Shock Waves in Metals

In this paper,a physical model of the structure and attenuation of shockwaves in metals is presented.In order to establish the constitutive equa-tions of materials under high velocity deformation and to study the struc-ture of transition zone of shock wave.two independent approaches are in-volved.Firstly,the specific internal energy is decomposed into the elasticcompression energy and elastic deformation energy,and the later is represent-ed by an expansion to third-order terms in elastic strain and entropy.includ-ing the coupling effect of heat and mechanical energy.Secondly,a plasticrelaxation function describing the behaviour of plastic flow under high tem-perature and high pressure is suggested from the viewpoint of dislocationdynamics.In addition.a group of ordinary differential equations has beenbuilt to determine the thermo-mechanical state variables in the transitionzone of a steady shock wave and the thickness of the high pressure shockwave.and an analytical solution of the equations can be foun     

On the Ellipticity of the Middle Surface of a Shell and its Application to the Asymptotic Analysis of ‘Membrane’ Shells

We consider a surface S = (), where ² is a bounded, connected, open set with a smooth boundary and : ³ is a smooth map; let () denote the components of the two-dimensional linearized strain tensor of S and let 0 with length 0 > 0. We assume the the norm ,|| ()||0, in the space V0() = { H¹() × H¹() × L²(); = 0 on 0 } is equivalent to the usual product norm on this space. We then establish that this assumption implies that the surface S is uniformly elliptic and that we necessarily have 0 = .     

The monotonicity and critical periods of periodic waves?of?the �� 6 field model

In this paper, we study the relationship between period and energy of periodic traveling wave solutions for the ?? ⁶ field model. The various topological phase portraits with periodic annulus are given by using standard phase portrait analytical technique. Some analytic behaviors (convexity, monotonicity and number of critical periods) of the period functions associated with periodic waves are investigated. We prove that the period function has exactly one critical period under certain conditions. Moreover, the numerical simulation is made. The results show that our theoretical analysis agrees with the numerical simulation.     

A micro-mechanical model of knitted fabric and its application to the analysis of buckling under tension in wale direction： buckling analysis

With the aid of the micro-mechanical model of knitted fabric proposed in Part 1 we analyze the buckling of a knitted fabric sheet when it is subjected to a tension along the wale direction. The large deformation of the fabric sheet in the critical configuration is considered and, to avoid possible deviation due to the approximation of the theory of thin plate, the three-dimensional theory of instability is used. The fabric sheet is considered as a three-dimensional body and all boundary conditions are satisfied. It is shown that the buckling of the fabric sheet is possible, two buckling modes and the corresponding buckling conditions are obtained, but only the flexural mode is physically possible as observed in experiments.The project supported by the National Natural Science Foundation of China (10272079)     

A Rigorous Derivation of the Coupling of a Kinetic Equation and Burgers’ Equation

In this article, we investigate the kinetic/fluid coupling on a toy model, which we obtain rigorously from a hydrodynamical limit. The idea is that at the level of the full kinetic model, the coupling is obvious. We then investigate the coupling obtained when passing into the limit. We show that, especially in presence of a shock stuck on the interface, the coupling involves a kinetic layer known as the Milne problem. Due to this layer, the limit process is quite delicate and some blow-up techniques are needed to ensure its strong convergence.     

A Variational Framework for the Thermomechanics of Gradient-Extended Dissipative Solids – with Applications to Diffusion,Damage and Plasticity

Journal of Elasticity - The paper presents a versatile framework for solids which undergo nonisothermal processes with irreversibly changing microstructure at large strains. It outlines rate-type...     

Estimation of the largest Lyapunov exponent from?the?perturbation vector and its derivative dot product

Nowadays, the largest Lyapunov exponent (LLE) is employed in many different areas of the scientific research. Thus, there is still need to elaborate fast and simple methods of LLE calculation. The new method of the LLE estimation is presented in this paper. The method (LLEDP) applies the perturbation vector and its derivative dot product to calculate Lyapunov exponent in the direction of disturbance. Value of this exponent is the LLE. The theoretical improvement was introduced. Results of the numerical simulations were shown and compared with the Stefański method (Stefański in Chaos Solitons Fractals 11(15):2443–2451, 2000; Stefański and Kapitaniak in Chaos Solitons Fractals 15:233–244, 2003; Stefański et al. in Chaos Solitons Fractals 23:1651–1659, 2005; Stefański in J. Theor. Appl. Mech. 46:665–678, 2008). Investigations of the Duffing oscillators with external excitation and three Duffing oscillators coupled in ring scheme without external excitation were made with use of the presented method. Fast time LLE estimation results convergence was shown.