单柱单锥型液—液旋流分离管内流场的LDV诊断

应用二维激光多普勒仪（ＬＤＶ）对一种单柱单锥型液－液旋流分离管内流场进行了测量,考察了流量、溢流比、压力比和气芯等参数对流场的影响。测量结果表明：切向速度分布呈典型的Ｒａｎｋｉｎｅ涡结构,沿轴向衰减很少,表明所用锥角是合适的;因该旋流管的水力直径较大,切向速度的总体水平较低,由于对了离特性带来了不利影响。此外,没有观察到切向速度分布的的双峰分布现象。轴向速度的总体水平较低,尤其是在锥形管的上游更为     

Hot flow analysis of swirling sudden-expansion dump combustor

Hot flow of a sudden-expansion dump combustor with swirling is analysed by employing an infinite chemical reaction rate. Turbulence properties are closed using one type of algebraic Reynolds stress model and two types of κ–? model. One of the κ–? models includes a swirling effect modification to the ε-equation. Computations have been performed by the SIMPLE-C algorithm with a power-law scheme. The calculated results of the momentum fields and turbulence quantities for swirling flow are compared with the available experimental data. It is shown that the standard κ–? model gives poor prediction of the mean velocity, particularly the tangential velocity. For the hot flow analysis of a sudden-expansion dump combustor with swirling flow it is suggested that it is necessary to use the modified κ–? model or algebraic Reynolds stress model.     

Stability of a liquid jet into incompressible gases and liquids: Part 2. Effects of the irrotational viscous pressure

In this paper we investigate the effects of an irrotational, viscous pressure on the stability of a liquid jet into gases and liquids. The analysis extends our earlier work (part 1) in which the stability of the viscous jet was studied assuming that the motion and pressure are irrotational and the viscosity enters through the jump in the viscous normal stress in the normal stress balance at the interface. The liquid jet is always unstable; at high Weber numbers the instability is dominated by capillary instability; at low W the instability is dominated by Kelvin–Helmholtz (KH) waves generated by pressures driven by the discontinuous velocity. In the irrotational analysis the viscosity is important but the effects of shear are neglected. In fact a discontinuous velocity is not compatible with the continuity of the tangential components of velocity and shear stress so that KH instability is not properly posed for exact study using the no-slip condition but some of the effects of viscosity can be ascertained using viscous potential flow. The theory is called viscous potential flow (VPF). Here we develop another irrotational theory in which the discontinuities in the irrotational tangential velocity and shear stress are eliminated in the global energy balance by selecting viscous contributions to the irrotational pressure. These pressures generate a hierarchy of potential flows in powers of the viscosity, but only the first one, linear in viscosity, in the irrotational viscous stress, is thought to have physical significance. The tangential velocity and shear stress in an irrotational study cannot be made continuous, but the effects of the discontinuous velocity and stress in the mechanical energy balance can be removed “in the mean.” This theory with the additional viscous pressure is called VCVPF, viscous correction of VPF. VCVPF is VPF with the additional pressures. The theory here cannot be compared with an exact solution, which would not allow the discontinuous velocity and stress. In other problems, like capillary instability, in which VCVPF can be compared with an exact solution, the agreements are uniformly excellent in the wave number when one of the fluids is gas and in good but not uniform, agreement when both fluids are liquids.     

Similarity Laws for the Velocity Distribution and the Reynolds Tensor Components in the Wall Region of a Turbulent Boundary Layer with Injection and Suction

Similarity laws of the distributions of the average velocity, tangential stress, and mean-square transverse velocity fluctuation are established in an intermediate zone of a turbulent boundary layer with injection and suction. This zone is located in the neighborhood of the wall outside the viscous sublayer. The similarity relationship for the velocity profile is a generalization of the well-known logarithmic law to include the case of the presence of a mass flow at the wall.     

Velocity distributions in a hydrocyclone separator

 The internal three-dimensional flow field in a hydrocyclone was studied using laser velocimetry. Seven axial planes were investigated for three different inlet flow rates and three independent and different rejects rates. Results at each measurement plane showed that the measured tangential velocity profile behaves like a forced vortex at the region near the air core, and like a free vortex in the outer portion of the flow. The peak nondimensional tangential velocity decreases as the distance from the inlet region increases, however, the peak dimensional tangential velocity increases as the distance from the inlet region increases. The nondimensional peak tangential velocities are approximately equal for all of the flow rates. The magnitude of the tangential velocity increased in the inner forced vortex region as the rejects rate was increased. Backflows exist in the axial velocity profile near the inlet region, but these reversed flows disappear in the exit region. The dimensional vorticity is proportional to inlet flow rate and decreases with increasing rejects flow rates. Received: 27 February 2001/Accepted: 19 June 2001     

基于滑移速度壁模型的复杂边界湍流大涡模拟

采用滑移速度壁模型实现了浸入边界方法与壁模型相结合的大涡模拟.本文首先分别采用平衡层模型和非平衡壁模型对周期山状流进行数值模拟,以考查在壁模型中考虑切向压力梯度的作用.数值结果表明,流场的压力对本文所采用的壁模型形式并不敏感,但是考虑切向压力梯度可以显著改进壁面摩擦力的计算结果,并且能够准确的预测强压力梯度区以及分离区内的流动平均统计特性.不考虑压力梯度效应的平衡层模型显著低估了壁面摩擦力的分布,同时无法准确预测分离区内的平均速度剖面.非平衡模型的修正项正比于切向压力梯度和壁面法向距离,因此在强压力梯度区或者网格较粗时,计算得到的平均压力和摩擦力分布以及流动的低阶统计量均与参考的实验和计算结果吻合.在此基础上,通过回转体绕流的大涡模拟考查了该方法用于模拟高雷诺数壁湍流的适用性,非平衡壁模型可以准确地捕捉流动的物理结构并较准确地预测其水动力学特性.结果表明,将浸入边界方法与非平衡滑移速度壁模型相结合的大涡模拟,有望成为数值模拟复杂边界高雷诺数壁湍流的工具.      

A hybrid technique for the solution of unsteady Maxwell fluid with fractional derivatives due to tangential shear stress

The article describes the unsteady motion of viscoelastic fluid for a Maxwell model with fractional derivatives. The flow is produced by cylinder, considering time dependent quadratic shear stress ft² on Maxwell fluid with fractional derivatives. The fractional calculus approach is used in the constitutive relationship of Maxwell model. By applying Laplace transform with respect to time t and modified Bessel functions, semianalytical solutions for velocity function and tangential shear stress are obtained. The obtained semianalytical results are presented in transform domain, satisfy both initial and boundary conditions. Our solutions particularized to Newtonian and Maxwell fluids having typical derivatives. The inverse Laplace transform has been calculated numerically. The numerical results for velocity function are shown in Table by using MATLAB program and compared them with two other algorithms in order to provide validation of obtained results. The influence of fractional parameters and material constants on the velocity field and tangential stress is analyzed by graphs.     

A unified view of energetic efficiency in active drag reduction,thrust generation and self-propulsion through a loss coefficient with some applications

An analysis of the energy budget for the general case of a body translating in a stationary fluid under the action of an external force is used to define a power loss coefficient. This universal definition of power loss coefficient gives a measure of the energy lost in the wake of the translating body and, in general, is applicable to a variety of flow configurations including active drag reduction, self-propulsion and thrust generation. The utility of the power loss coefficient is demonstrated on a model bluff body flow problem concerning a two-dimensional elliptical cylinder in a uniform cross-flow. The upper and lower boundaries of the elliptic cylinder undergo continuous motion due to a prescribed reflectionally symmetric constant tangential surface velocity. It is shown that a decrease in drag resulting from an increase in the strength of tangential surface velocity leads to an initial reduction and eventual rise in the power loss coefficient. A maximum in energetic efficiency is attained for a drag reducing tangential surface velocity which minimizes the power loss coefficient. The effect of the tangential surface velocity on drag reduction and self-propulsion of both bluff and streamlined bodies is explored through a variation in the thickness ratio (ratio of the minor and major axes) of the elliptical cylinders.     

Generalization of the poiseuille law based on the constitutive rheological relation for polymeric liquids

The method of perturbations of the small parameter determining the anisotropy of the properties of linear polymers is used to determine the velocity profile and rate for steady flow in a round tube. It is shown that for the four-parameter rheological model considered, the stress state of the Poiseuille flow along with the tangential shear stress is characterized by the first and second differences of normal stresses. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 40, No. 5, pp. 158–163, September–October, 1999.     

不同参数下环形通道内湍流旋流流动的模拟

应用一种合理考虑湍流一旋流相互作用及湍流脉动各向异性的新的代数ＲｅｙｎｏｌｄＳ应力模型,对环形通道内的湍流旋流流动进行了数值模拟．研究了旋流数、进口轴向速度和内外半径比等参数对环形通道内湍流旋流流动的影响,以及由此产生的流场变化对强化环形通道内传热的作用．     

Effect of momentum transfer condition at the interface of a model of creeping flow past a spherical permeable aggregate

Creeping flow past an isolated, spherical and permeable aggregate has been studied adopting the Stokes equation to model the fluid external to the aggregate and the Brinkman equation for the internal flow. At the interface of the clear fluid and porous region stress jump boundary condition for tangential stresses is used along with the continuity of velocity components and continuity of the normal stress. Using Faxen’s laws, drag and torque are calculated for different flow conditions and it is observed that drag and torque not only change with the permeability of the porous region, but as stress jump coefficient increases, the rate of change in behavior of drag and torque increases.     

Asymptotic theory of the Boltzmann system,for a steady flow of a slightly rarefied gas with a finite Mach number: General theory

A steady rarefied gas flow with Mach number of the order of unity around a body or bodies is considered. The general behaviour of the gas for small Knudsen numbers is studied by asymptotic analysis of the boundary-value problem of the Boltzmann equation for a general domain. The effect of gas rarefaction (or Knudsen number) is expressed as a power series of the square root of the Knudsen number of the system. A series of fluid-dynamic type equations and their associated boundary conditions that determine the component functions of the expansion of the density, flow velocity, and temperature of the gas is obtained by the analysis. The equations up to the order of the square root of the Knudsen number do not contain non-Navier–Stokes stress and heat flow, which differs from the claim by Darrozes (in Rarefied Gas Dynamics, Academic Press, New York, 1969). The contributions up to this order, except in the Knudsen layer, are included in the system of the Navier–Stokes equations and the slip boundary conditions consisting of tangential velocity slip due to the shear of flow and temperature jump due to the temperature gradient normal to the boundary.     

Unsteady mixed convection flow from a rotating vertical cone with a magnetic field

An analysis is developed to study the unsteady mixed convection flow over a vertical cone rotating in an ambient fluid with a time-dependent angular velocity in the presence of a magnetic field. The coupled nonlinear partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme. The local skin friction coefficients in the tangential and azimuthal directions and the local Nusselt number increase with the time when the angular velocity of the cone increases, but the reverse trend is observed for decreasing angular velocity. However, these are not mirror reflection of each other. The magnetic field reduces the skin friction coefficient in the tangential direction and also the Nusselt number, but it increases the skin friction coefficient in the azimuthal direction. The skin friction coefficients and the Nusselt number increase with the buoyancy force.     

Deformation trapping due to thermoplastic instability in one-dimensional wave propagation

One-dimensional shear wave propagation in a half-space of a nonlinear material is considered. The surface of the half-space is subjected to a time dependent but spatially uniform tangential velocity. The half-space material exhibits strain hardening, thermal softening and strain rate sensitivity of the flow stress. For this system, a well-defined band of intense shear deformation can develop adjacent to the loaded surface, even though the material has no imperfections or other natural length scale. Representative particle velocity and strain profiles, which have been obtained numerically, are described for several different models.     

Two-phase slug flows in helical pipes: Slug frequency alterations and helicity fluctuations

Air-water numerical simulations in the slug flow regime have been performed in horizontal helical pipes and the effects of geometries on the flow regime have been investigated. Depending on the length of the helix, outlet slug frequencies have been reduced with various degrees of efficiency. Correlations between mean tangential velocity and helicity density fluctuations have been identified and investigated qualitatively. These flow fields show smaller time scales than those obtained in volume fractions fluctuations. Shifts observed in the tangential velocity and mean helicity fluctuations to smaller time scales (high frequencies) are associated with regime transitions. For a slug flow undergoing a continuous transition to the annular flow regime, it is shown that the presence of slower (low frequencies) helicity fluctuations is attributed to the variations in the axial velocity. Finally, the analysis of the helicity at gas-liquid interface confirms the presence of the mixing zone at the slug front.     

Numerical simulation of turbulent flows in trapezoidal meandering compound open channels

Three‐dimensional (3D) numerical study is presented to investigate the turbulent flow in meandering compound open channels with trapezoidal cross‐sections. The flow simulation is carried out by solving the 3D Reynolds‐averaged continuity and Navier–Stokes equations with Reynolds stress equation model (RSM) for steady‐state flow. Finite volume method (FVM) is applied to numerically solve the governing equations of fluid flow. The velocity magnitude, tangential velocity, transverse velocity and Reynolds stresses are calculated for various flow conditions. Good agreement between the simulated and available laboratory measurements was obtained, indicating that the RSM can accurately predict the complicated flow phenomenon. Comparison of the calculated secondary currents of four cases (one being inbank flow and other three being overbank flow) with different water depths reveals that (i) the inbank flow exhibits different flow behaviors from that of the overbank flow does and (ii) the water depth has significant effects on the magnitude and direction of secondary currents. Copyright © 2010 John Wiley & Sons, Ltd.     

On a boundary condition for pressure‐driven laminar flow of incompressible fluids

We prove in Theorem 1 a new relationship between the stress, pressure, velocity, and mean curvature for embedded surfaces in incompressible viscous flows. This is then used to define a corresponding modified pressure boundary condition for flow of Newtonian and generalized Newtonian fluids. These results agree with an intuitive notion of the flow physics but apparently have not previously been shown rigorously. We describe some of the implementation issues for inflow and outflow boundaries in this context and give details for a penalty treatment of the associated tangential velocity constraint. This is then implemented and applied in high‐resolution 3D benchmark calculations for a representative generalized viscosity model. Copyright © 2007 John Wiley & Sons, Ltd.     

On unsteady motions of a second-order fluid over a plane wall

In this paper, three types of unsteady flows of second-order fluids are considered, namely, flow caused by impulsive motion of a flat plate, flow induced by a constantly accelerating plane and flow imposed by a flat plate that applies a constant tangential stress to the fluid. The previous attempts made regarding these problems, by using the Laplace transform, have failed. In this paper, the sine and the cosine transforms are used to solve these problems and exact solutions for the velocity distributions are found in terms of definite integrals. It is shown that these exact solutions satisfy the initial and the boundary conditions and the governing equation.     

Particle dynamics in dense shear granular flow

The particle dynamics in an annular shear granular flow is studied using the discrete element method, and the influences of packing fraction, shear rate and friction coefficient are analyzed. We demonstrate the existence of a critical packing fraction exists in the shear granular flow. When the packing fraction is lower than this critical value, the mean tangential velocity profile exhibits a rate-independent feature. However, when the packing fraction exceeds this critical value, the tangential velocity profile becomes rate-dependent and varies gradually from linear to nonlinear with increasing shear rate. Furthermore, we find a continuous transition from the unjammed state to the jammed state in a shear granular flow as the packing fraction increases. In this transforming process, the force distribution varies distinctly and the contact force network also exhibits different features.     

非稳态Couette流动阶段的边界位移与黏性能量耗散

本文研究了牛顿流体非稳态Couette流动阶段的边界位移与流体黏性摩擦能耗.在上边界始终保持静止,下边界以恒定速度或恒定内壁剪切应力突然运动的情况下,建立了Couette非稳态流动的数学模型.求解定解问题,获得流体速度分布函数;通过渐近分析,获得不同边界条件下流动充分发展的临界时间,进而获得非稳态过程中的边界位移量.利用边界剪切应力和位移量的结果,计算非稳态过程中移动平板做功;再结合流体动能增加量,计算得出不同边界条件下非稳态流动阶段流体黏性摩擦能耗.