Synthesis and Aggregation Behavior of meso‐Sulfinylporphyrins: Evaluation of S‐Chirality Effects on the Self‐Organization to S–Oxo‐Tethered Cofacial Porphyrin Dimers

The synthesis and aggregation behavior of meso‐sulfinylporphyrins are described. The copper‐catalyzed C–S cross‐coupling reaction of a meso‐iodoporphyrin with benzenethiol and n‐octanethiol has proved to be an efficient method for the synthesis of meso‐sulfanylporphyrins, which are oxygenated by m‐chloroperbenzoic acid to produce the corresponding meso‐sulfinylporphyrins. Optically active zinc meso‐sulfinylporphyrins were successfully isolated by means of optical resolution of the racemates on a chiral HPLC column. Zinc sulfinylporphyrins readily undergo self‐organization through S–oxo–zinc coordination to form cofacial porphyrin dimers in solution, in which the hetero‐ and homodimers are present as a diastereomeric mixture. The aggregation modes of the S–oxo‐tethered porphyrin dimers were fully characterized by ¹H NMR, IR, and UV/Vis spectroscopy as well as DFT calculations on their model compounds, thus revealing that the self‐aggregation behavior depends on the combination of S chirality. The absolute configurations at the sulfur center can be determined by the exciton‐coupled CD method. The observed self‐association constant for the S–oxo‐tethered dimerization of (S)‐phenylsulfinylporphyrin in toluene is larger than that in dichloromethane, which reflects the difference in dipole moments between the homodimer and the monomer. In cyclic and differential pulse voltammetry, the first oxidation process of the cofacial dimers is split into two reversible steps, which indicates that the initially produced π radical cations are delocalized efficiently between the two porphyrin rings. The present findings demonstrate the potential utility of meso‐sulfinyl groups as promising ligands for investigating the effects of peripheral chirality on the structures and optical and electrochemical properties of metal‐assisted porphyrin self‐assemblies.     

Synthesis and Self‐Organization of Zinc β‐(Dialkoxyphosphoryl)porphyrins in the Solid State and in Solution

The first synthesis and self‐organization of zinc β‐phosphorylporphyrins in the solid state and in solution are reported. β‐Dialkoxyphosphoryl‐5,10,15,20‐tetraphenylporphyrins and their Zn^II complexes have been synthesized in good yields by using Pd‐ and Cu‐mediated carbon–phosphorous bond‐forming reactions. The Cu‐mediated reaction allowed to prepare the mono‐β‐(dialkoxyphosphoryl)porphyrins 1 Zn – 3 Zn starting from the β‐bromo‐substituted zinc porphyrinate ZnTPPBr (TPP=tetraphenylporphyrin) and dialkyl phosphites HP(O)(OR)₂ (R=Et, iPr, nBu). The derivatives 1 Zn – 3 Zn were obtained in good yields by using one to three equivalents of CuI. When the reaction was carried out in the presence of catalytic amounts of palladium complexes in toluene, the desired zinc derivative 1 Zn was obtained in up to 72 % yield. The use of a Pd‐catalyzed C? P bond‐forming reaction was further extended to the synthesis of β‐poly(dialkoxyphosphoryl)porphyrins. An unprecedented one‐pot sequence involving consecutive reduction and phosphorylation of H₂TPPBr₄ led to the formation of a mixture of the 2,12‐ and 2,13‐bis(dialkoxy)phosphorylporphyrins 5 H₂ and 6 H₂ in 81 % total yield. According to the X‐ray diffraction studies, 1 Zn and 3 Zn are partially overlapped cofacial dimers formed through the coordination of two Zn centers by two phosphoryl groups belonging to the adjacent molecules. The equilibrium between the monomeric and the dimeric species exists in solutions of 1 Zn and 3 Zn in weakly polar solvents according to spectroscopic data (UV/Vis absorption and NMR spectroscopy). The ratio of each form is dependent on the concentration, temperature, and traces of water or methanol. These features demonstrated that zinc β‐phosphorylporphyrins can be regarded as new model compounds for the weakly coupled chlorophyll pair in the photosynthesis process.     

Meso位直结型稳定双卟啉的合成及性质

利用氧化法成功地合成了同核meso位直结型稳定卟啉二聚体锌络合物,收率接近理论值;无论是碱式还是金属络合物都显示出卟啉环间成平面正交的电子吸收光谱;在循环伏安图谱中都显示出卟啉环间再氧化还原过程中较强烈的库仑作用;每个卟啉环的一电子氧化或还原均为可逆过程。     

C,C‐ and N,C‐Coupled Dimers of 2‐Aminotetraphenylporphyrins: Regiocontrolled Synthesis,Spectroscopic Properties,and Quantum‐Chemical Calculations

β,β′‐Bisporphyrins are intrinsically chiral porphyrin dimers with fascinating properties. The configurational stability at their axes can be directed by variation of the central metal atoms. Herein, we present a regioselective functionalization of the monomeric 2‐amino‐tetraphenyl‐porphyrin as a versatile substrate for dimerization by oxidative coupling. By simple variation of the reaction conditions (solvent and oxidant), the oxidation selectively gave either the axially chiral C,C‐coupled diaminobisporphyrin in high yields or, under Ullmann conditions, the twofold N,C‐linked achiral dimer, also in good yields. A generalized mechanism for the coupling reaction is proposed based on DFT calculations. The axially chiral β,β′‐coupled porphyrin dimers were isolated as racemic mixtures, but can be resolved by HPLC on a chiral phase. TDDFT and coupled‐cluster calculations were used to explain the spectroscopic properties of the aminoporphyrins and their dimers and to elucidate the absolute configurations of the C,C‐coupled bisporphyrins.     

Effects of carbon-metal-carbon linkages on the optical, photophysical, and electrochemical properties of phosphametallacycle-linked coplanar porphyrin dimers

5-(Diphenylphosphanyl)-10,15,20-triarylporphyrins (meso-phosphanylporphyrins) underwent complexations with palladium(II) and platinum(II) salts to afford phosphapalladacycle- and phosphaplatinacycle-fused coplanar porphyrin dimers, respectively, via regioselective peripheral β-C-H activation of the meso-phosphanylporphyrin ligands. The optical and electrochemical properties of these metal-linked porphyrin dimers as well as their porphyrin monomer/dimer references were investigated by means of steady-state UV-vis absorption/fluorescence spectroscopy, cyclic and differential pulse voltammetry, time-resolved spectroscopy (fluorescence and transient absorption lifetimes and spectra), and magnetic circular dichroism spectroscopy. All the observed data clearly show that the palladium(II) and platinum(II) linkers play crucial roles in the electronic communication between two porphyrin chromophores at the one-electron oxidized state and in the singlet-triplet intersystem-crossing process at the excited state. It has also been revealed that the C-Pt-C linkage makes more significant impacts on these fundamental properties than the C-Pd-C linkage. Furthermore, density functional theory calculations on the metal-linked porphyrin dimers have suggested that the antibonding dπ-pπ orbital interaction between the peripherally attached metal and adjacent pyrrolic β-carbon atoms destabilizes the highest occupied molecular orbitals of the porphyrin π-systems and accounts for the observed unique absorption properties. On the basis of these experimental and theoretical results, it can be concluded that the linear carbon-metal-carbon linkages weakly but definitely perturb the optical, photophysical, and electrochemical properties of the phosphametallacycle-linked coplanar porphyrin dimers.     

Investigation of tightly coupled porphyrin arrays comprised of identical monomers for multibit information storage

Our prior designs for molecular-based information storage devices have employed multiple redox-active units organized in weakly coupled, covalently linked arrays. To explore a simpler design, we report here the synthesis of porphyrin arrays where porphyrins with identical oxidation potentials are directly linked to one another instead of joined via a molecular linker. Oxidative coupling with AgPF(6) of zinc(II)-5,15-bis(4-tert-butylphenyl)-10-phenylporphyrin, obtained by a rational synthesis, afforded the expected dimer joined by a meso-meso linkage and an unexpected trimer joined by meso-meso linkages. For attachment to an electroactive surface we synthesized a meso-linked porphyrin dimer with a thiol-linker in one of the meso positions. The S-acetyl protecting group was used to avoid handling free thiol groups. Coupling of zinc(II)-5,10,15-tris(3, 5-di-tert-butylphenyl)porphyrin ("upper half") and zinc(II)-5-[4-(S-acetylthio)phenyl]-10,20-bis(3, 5-di-tert-butylphenyl)porphyrin ("lower half") afforded three different meso-linked dimers with the desired dimer as the main product. Electrochemical examination of the meso-linked dimer in solution shows that the first two oxidation potentials of the array differ by approximately 0.15 V and straddle the value exhibited by the monomeric constituents. The third and fourth oxidation potentials of the array are also split although to a lesser extent ( approximately 0.08 V) than the first and second. For the meso-linked trimer, the first three oxidation waves are also split; however, these waves are severely overlapped. The electrochemical behavior of the dimers and trimer is indicative of strong electronic interactions among the porphyrins. The thiol-derivatized meso-linked dimers form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetylthio protecting group. The porphyrin SAM exhibits four well-resolved oxidation waves. Regardless, the meso-meso linkage is relatively unstable upon formation of the pi-cation radical(s). This characteristic indicates that the structural motif is of limited utility for molecular information storage elements.     

The synthesis of covalently linked tetraarylporphyrin dimers

A new and general synthesis of porphyrin dimers is described. The synthesis involves the reaction of dibromoalkanes with phenolic porphyrins, such as 5(4-hydroxyphenyl)-10,15,20-tritolylporphyrin, to form σ-bromoalkyl porphyrin ethers. The latter compounds are then reacted with a second phenolic porphyrin to give porphyrin dimers. A mixed metalloporphyrin dimer has been prepared which contains both V(IV) and Cu(II). The compounds have been examined spectroscopically. The free-base porphyrin dimers show a splitting of the intense Soret band. This is interpreted as indicative of weak singlet energy transfer between the covalently linked porphyrins.     

Large two-photon absorption (TPA) cross-section of directly linked fused diporphyrins

The excited state dynamics and two-photon absorption properties of four novel triply linked porphyrin dimers in toluene have been investigated. The fused porphyrin dimers exhibit extremely increased two-photon absorption cross-section values (12,000-15,000 GM) compared with porphyrin monomers owing to much enhanced pi-electron delocalization throughout the porphyrin dimer ring.     

Excited-state energy-transfer dynamics of self-assembled imine-linked porphyrin dyads

Toward the development of new strategies for the synthesis of multiporphyrin arrays, we have prepared and characterized (electrochemistry and static/time-resolved optical spectroscopy) a series of dyads composed of a zinc porphyrin and a free base porphyrin joined via imine-based linkers. One dyad contains two zinc porphyrins. Imine formation occurs under gentle conditions without alteration of the porphyrin metalation state. Five imine linkers were investigated by combination of formyl, benzaldehyde, and salicylaldehyde groups with aniline and benzoic hydrazide groups. The imine-linked dyads are quite stable to routine handling. The excited-state energy-transfer rate from zinc to free base porphyrin ranges from (70 ps)(-)(1) to (13 ps)(-)(1) in toluene at room temperature depending on the linker employed. The energy-transfer yield is generally very high (>97%), with low yields of deleterious hole/electron transfer. Collectively, this work provides the foundation for the design of multiporphyrin arrays that self-assemble via stable imine linkages, have predictable electronic properties, and have comparable or even enhanced energy-transfer characteristics relative to those of other types of covalently linked systems.     

Synthesis of Novel Symmetric Porphyrin Schiff Base Dimers by Solid–Liquid Reaction Methodology

A new convenient solid–liquid condensation reaction procedure for the synthesis of novel asymmetric and symmetric meso‐tetraarylporphyrin and metalloporphyrin Schiff bases is reported. The condensation reaction between β‐formyl porphyrin or metalloporphyrins and aromatic amines was carried out at solid–liquid interface by using neutral alumina powder as a solid support for β‐formyl porphyrin or metalloporphyrins and absolute ethanol as the carrier solvent for aromatic amines. Six different asymmetric porphyrin/metalloporphyrin Schiff bases were synthesized via solid–liquid interface reaction methodology. The same solid–liquid synthetic methodology was applied for the synthesis of six novel symmetric Schiff base porphyrin/metalloporphyrin dimers. The comparison of UV–visible spectra of porphyrin Schiff base monomers and dimers revealed that some degree of electronic perturbation has occurred upon dimerization as the Soret bands of the monomers underwent peak broadening along with red shifts. Column chromatography and crystallization were used to purify the compounds. Fourier transform infrared, UV–visible, elemental analysis, ¹H NMR, and mass spectrometry were used to characterize the newly synthesized compounds.     

Electrochemical, spectral, and computational studies of metalloporphyrin dimers formed by cation complexation of crown ether cavities

The effect on the electrochemical oxidation and reduction potentials of 5,10,15,20-tetrakis(benzo-15-crown-5)porphyrin (TCP) and its metal derivatives (MTCP; M = Mg(II), VO(IV), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Ag(II)) upon potassium ion induced dimerization of the porphyrins was systematically performed in benzonitrile containing 0.1 M (TBA)ClO(4) by differential pulse voltammetry technique. The HOMO--LUMO energy level diagram constructed from the electrochemical data revealed destabilization of the HOMO level and stabilization of the LUMO level upon dimer formation while such a perturbation was larger for the HOMO level than the LUMO level. The geometry and electronic structure of a representative ZnTCP and its dimer, K(4)(ZnTCP)(2), were evaluated by the ab initio B3LYP method utilizing a mixed basis set of 3-21G(*) for Zn, K, O, and N and STO-3G for C and H. The inter-porphyrin ring distance of the dimer calculated from the optimized geometry agreed with the spectroscopically determined one, and the calculated HOMO and LUMO frontier orbitals revealed delocalization on both of the porphyrins rings. The metal-metal distances calculated from the triplet ESR spectra of the K(+) induced porphyrin dimers bearing paramagnetic metal ions in the cavity followed the trend Cu--Cu < VO--VO < Ag--Ag. However, the spectral shifts resulting from the exciton coupling of the interacting porphyrin pi-systems revealed no specific trend with respect to the metal ion in the porphyrin cavity. Additionally, linear trends in the electrochemically measured HOMO--LUMO gap and the energy corresponding to the most intense visible band of both MTCP and K(4)(MTCP)(2) were observed. A reduced HOMO--LUMO gap predicted for the dimer by B3LYP/(3-21G(), STO-3G) calculations was confirmed by the results of optical absorption and electrochemical studies.     

Synthesis of oligo(p-phenylene)-linked dyads containing free base, zinc(II) or thallium(III) porphyrins for studies in artificial photosynthesis

A series of (p-phenylene)_n-linked meso-mesityl-substituted porphyrin dyads (n=2-4) was prepared via Suzuki coupling of zinc(II) and free base porphyrin building blocks. The resulting zinc(II)/free base porphyrin dyads were demetalated. The series of free base porphyrin dimers (n=1-4), four other porphyrin dimers (with p-phenylene, diphenylethyne or diphenylbutadiyne linkers; and aryl or tridec-7-yl meso substituents), and several benchmark monomers were converted to the thallium(III)chloride complexes under mild conditions. The collection of eight Tl(III)Cl/Tl(III)Cl dimers is designed for studies of ground-state hole-transfer processes and comparison with the excited-state energy- and hole-transfer processes of the corresponding Zn(II)/free base dyads. Altogether, 18 new porphyrin arrays and benchmark monomers have been prepared.     

Synthesis of new porphyrins with peripheral conjugated chelates and their use for the preparation of porphyrin dimers linked by metal ions

This article describes the preparation of several new porphyrins bearing chelating peripheral groups fully conjugated with the macrocyclic pi-system. Treatment of a 2-nitro-meso-tetraarylporphyrin with phosphite gave a cyclic enamine, whose formylation gave an enaminoaldehyde. The thio analogue was obtained on treatment with Lawesson's reagent. The same reagent was also used to obtain the isomeric thioenaminoketone chelates. A enaminoketone ligand was prepared from a porphyrinic pyrrolone. All these ligands, as internal nickel complexes, could be metalated with palladium to yield porphyrinic dimers. The dimers obtained from enaminoketones and thioketones show a trans geometry, while in the enaminoaldehyde and -thioaldehyde series the cis isomer is thermodynamically favored. The bathochromic shifts of the electronic spectra of the aldehyde-derived dimers illustrate the strong electronic effect of peripheral metalation and dimerization. However, in the case of the pyrrolone-derived ligand, opposite effects were observed, due to partial reconstitution of the porphyrin chromophore on complexation. As with the dimers derived from enaminoketones, the dimers derived from the new ligands show typical splitting (up to 190 mV) of the electrochemical waves confirming large porphyrin-porphyrin interactions.     

Bisporphyrins with bischlorin features obtained by direct anodic coupling of porphyrins

The proximity of two or more porphyrin or chlorin-like structures has been shown to be crucial in numerous biological processes, such as electron transfers. The one-pot electrochemical synthesis of a dimeric tetraphenylporphyrin with one 1,2-(diphenylphosphonium)benzene as a spacer and of its porphyrin-monomer precursor are reported. These new compounds have been characterized by (1)H and (31)P NMR, ESR, and UV-visible spectroscopy and microanalysis. Electrochemical data are reported, and the redox behavior is analyzed for the monomers and the dimers. Important interactions between the two chromophores and a phosphonium-phosphonium interaction have been observed. UV-visible and (1)H NMR data along with electrochemical behavior suggest that the positive charge carried by the two phosphonium units is in part delocalized onto the pi system of the porphyrins, this gives an unexpected bis-porphyrin with bischlorin spectroscopic features.     

Synthesis and photophysical properties of light-harvesting arrays comprised of a porphyrin bearing multiple perylene-monoimide accessory pigments

We present the synthesis and characterization of new light-harvesting arrays containing two, four, or eight perylene-monoimide accessory pigments attached to a zinc porphyrin. Each perylene is substituted with one or three 4-tert-butylphenoxy substituents. A 4,3'- or 4,2'-diarylethyne linker joins the perylene N-imide position and the porphyrin meso-position, affording divergent or convergent architectures, respectively. The architectures are designed to provide high solubility in organic media and facile perylene-to-porphyrin energy transfer, while avoiding charge-transfer quenching of the excited porphyrin product. For the array containing four perylenes per porphyrin in both nonpolar (toluene) and polar (benzonitrile) media and for the array containing eight perylenes per porphyrin in toluene, the photoexcited perylene-monoimide dye (PMI) decays rapidly ( approximately 3.5 ps) and predominantly (>or=90%) by energy transfer to the zinc porphyrin to form the excited zinc porphyrin (Zn), which has excited-state characteristics (lifetime, fluorescence yield) comparable (within approximately 10%) to those of the isolated chromophore. For the array containing eight perylenes in benzonitrile, PMI decays approximately 80% by energy transfer (forming Zn) and approximately 20% by hole transfer (forming PMI- Zn+); Zn subsequently decays approximately 20% by electron transfer (also forming PMI- Zn+) and approximately 80% by the normal routes open to the porphyrin monomer (intersystem crossing, internal conversion, fluorescence). In addition to rapid and efficient perylene-to-porphyrin energy transfer, the broad blue-green to yellow absorption of the perylene dyes complements the blue absorption of the porphyrin, resulting in excellent light harvesting across a significant spectral region. Collectively, the work described herein identifies multiperylene-porphyrin arrays that exhibit suitable photochemical properties for use as motifs in larger light-harvesting systems.     

双-锌卟啉对DABCO分子识别的立体构象及其热力学研究

合成了系列不同长度以柔性侧链相连的p/p型双-锌卟啉配合物,用¹H NMR和UV-Vis研究了不同温度下该系列配合物与刚性双齿配体DABCO(1,4-二氮杂双环)的轴向配位反应,考察了侧链长度对双-锌卟啉与配体的分子识别能力影响。结果表明,主体分子双-锌卟啉可以对客体分子BABCO进行分子识别,合适长度的柔韧烷氧链可以调节主体分子的构象,使DABCO嵌入双卟啉两个卟啉环间空位中,形成锌卟啉-DABCO-锌卟啉三元夹心式配合物构象。探讨了配位反应中立体构象的变化过程,并测定了热力学参数。     

Sequence and linker dependent chiral dimerization of DNA–porphyrin conjugates

Circular dichroism (CD), UV–vis absorption, fluorescence, and resonance light scattering (RLS) spectroscopies were used to elucidate the role of the DNA sequence, linkers between DNA and porphyrin, and metal in the porphyrin coordination center on the self-assembly of DNA–porphyrin conjugates. A series of eight non-self-complementary DNA–porphyrin conjugates have been synthesized with zinc and free-base porphyrins covalently attached to the short ODNs (A₈ or T₈) via amide or phosphate linker. A small structural modification (e.g., amide linker replaced by the phosphate linker) showed a dramatic effect on the aggregation properties of DNA–porphyrin conjugates and greatly altered their spectroscopic properties. At low ionic strength, porphyrin aggregation was not observed for any conjugate. An increase in the ionic strength caused two out of eight conjugates to form chiral porphyrin dimers.     

Substituent effects in porphyrin dimer complexes studied by IR spectroscopy

A series of lanthanide porphyrin dimers have been synthesized and investigated with IR spectroscopic techniques. The spectra of the porphyrin dimers are compared not only with each other but also with those of their component monomer units. The experimental results exhibit that the IR spectra of the porphyrin dimers are closely related to those of their corresponding monomers. A detailed analysis of the IR spectra between the porphyrin dimers and monomers suggest that the dimer molecules can be treated as regular derivatives of metalloporphyrin monomers despite the symmetries of these two systems being different. The dimerization of the porphyrin rings only result in frequency shifts and intensity changes of the IR spectra. These shifts are attributed to the induced π–π interactions between these two macrocycles. The downshifts of the frequencies observed in Ce(OEP)₂ further indicate that the π–π interactions intrinsically decrease the bond strength of the entire molecule. Additionally, only the relative intensities instead of the frequencies of the ethyl vibrations in the region 2800–3000 cm⁻¹ are observed to be sensitive to the types and the positions of the substituent groups. These observations suggest that these ethyl vibrational modes of the OEP moiety can be used as characteristic bands to monitor subtle deformations of the porphyrin rings caused by the substituent groups in the dimer complexes.     

Charge‐Transfer State and Large First Hyperpolarizability Constant in a Highly Electronically Coupled Zinc and Gold Porphyrin Dyad

We report the synthesis and the characterizations of a novel dyad composed of a zinc porphyrin (ZnP) linked to a gold porphyrin (AuP) through an ethynyl spacer. The UV/Vis absorption spectrum and the electrochemical properties clearly reveal that this dyad exhibits a strong electronic coupling in the ground state as evidenced by shifted redox potentials and the appearance of an intense charge‐transfer band localized at λ=739 nm in dichloromethane. A spectroelectrochemical study of the dyad along with the parent homometallic system (i.e., ZnP–ZnP and AuP–AuP) was undertaken to determine the spectra of the reduced and oxidized porphyrin units. Femtosecond transient absorption spectroscopic analysis showed that the photoexcitation of the heterometallic dyad leads to an ultrafast formation of a charge‐separated state (⁺ZnP–AuP^.) that displays a particularly long lifetime (τ=4 ns in toluene) for such a short separation distance. The molecular orbitals of the dyad were determined by DFT quantum‐chemical calculations. This theoretical study confirms that the observed intense band at λ=739 nm corresponds to an interporphyrin charge‐transfer transition from the HOMO orbital localized on the zinc porphyrin to LUMO orbitals localized on the gold porphyrin. Finally, a Hyper–Rayleigh scattering study shows that the dyad possesses a large first molecular hyperpolarizability coefficient (β=2100×10^?30 esu at λ=1064 nm), thus highlighting the valuable nonlinear optical properties of this new type of push–pull porphyrin system.     

Designs,Synthesis, Characterization and Direct Electrochemistry of Zinc‐Porphyrin Bearing Pyrene Noncovalent Functionalized Graphene Oxide Sheet

We have designed and synthesis a new compound of zinc‐porphyrin bearing four pyrene groups (ZnP‐t‐P(py)₄) and prepared a new hybrid materials of ZnP‐t‐P(py)₄ with graphene oxide (GO) via non‐covalent interactions. The ZnP‐t‐P(py)₄, along with four pendant pyrene entities ZnP‐t‐P(py)₄, stacking on the (GO) surface due to π‐ π interactions, has been revealed by AFM measurements. FTIR, UV‐vis absorption confirm the non‐covalent functionalization of the GO. Raman spectral measurements revealed the electronic structure of the GO to be intact upon hybrid formation. In this donor‐acceptor nanohybrid, the fluorescence of photoexcited ZnP‐t‐P(py)₄ is effectively quenched by a possible electron‐transfer process. The fluorescence and photoelectrical response measurements also showed that this hybrid may act as an efficient photoelectric conversion material for optoelectronic applications.