Highly efficient C-H insertion reactions of hydrogen peroxide catalyzed by homogeneous and heterogeneous methyltrioxorhenium systems in ionic liquids

A convenient and efficient C-H insertion reaction of environment friendly H₂O₂ into representative hydrocarbon derivatives by homogeneous methyltrioxorhenium (MTO), heterogeneous poly(4-vinylpyridine)/methyltrioxorhenium (PVP/MTO) and microencapsulated polystyrene/methyltrioxorhenium (PS/MTO) systems in ionic liquids, is described. In some cases a higher activity was observed if compared with the same reaction in molecular solvents. The heterogeneous catalysts are stable systems under the reaction conditions and can be recycled for more transformations.     

Selective epoxidation of monoterpenes with H2O2 and polymer-supported methylrheniumtrioxide systems

A convenient and efficient synthesis of monoterpene epoxides by application of heterogeneous poly(4-vinylpyridine)/methyl rhenium trioxide (PVP/MTO) and polystyrene/methyl rhenium trioxide (PS/MTO) systems is described. Even highly sensitive terpenic epoxides were obtained in excellent yield. Environment friendly, easily available, and low cost H₂O₂ was used as oxidant. Catalysts were stable systems for at least five recycling experiments.     

Core-shell-corona au-micelle composites with a tunable smart hybrid shell

Micelles having a core of polystyrene and a mixed shell of poly(ethylene glycol) and poly(4-vinylpyridine) were formed through self-assembly of a triblock copolymer poly(ethylene glycol)- block-polystyrene- block-poly(4-vinylpyridine) in acidic water (pH 2). Reducing the HAuCl(4)-treated micelle solution leads to the formation of the Au-micelle composites with a core of polystyrene, a hybrid shell of poly(4-vinylpyridine)/Au/poly(ethylene glycol), and a corona of poly(ethylene glycol). The gold nanoparticles with controlled sizes were anchored to poly(4-vinylpyridine) to form the physically cross-linked hybrid shell. In aqueous solution, the hybrid shell is swollen and the swollen degree is sensitive to the pH condition. Under basic conditions, the channel in the hybrid shells of the composite is produced, which renders the composites a good catalytic activity. In addition, the composites also show good stability, unchanged hydrodynamic diameter, and surface plasmon absorption under different pH conditions.     

Preparation of silica-coated poly(styrene-co-4-vinylpyridine) particles and hollow particles

This paper presents a novel method for preparation of polymer-silica colloidal nanocomposites based on emulsion polymerization and subsequent sol-gel nanocoating process. The polystyrene latex particles bearing basic groups on their surfaces were successfully synthesized through emulsion polymerization using 4-vinylpyridine (4VP) as a functional comonomer and polyvinylpyrrolidone (PVP) as a surfactant. A series of poly(styrene-co-4-vinylpyridine)/SiO2 nanocomposite particles with smooth or rough core-shell morphology were obtained through the coating process. The poly(styrene-co-4-vinylpyridine) particles could be dissolved subsequently or simultaneously during the sol-gel coating process to form hollow particles. The effects of the amount of 4VP, PVP, NH(4)OH, and tetraethoxysilane (TEOS) on both the nanocomposite particles and hollow particles were investigated. Transmission electron microscopy showed that the morphology of the nanocomposite particles and hollow particles was strongly influenced by the initial feed of the comonomer 4VP and the coupling agent PVP. The conditions to obtain all hollow particles were also studied. Thermogravimetric analysis and energy dispersive X-ray spectroscopy analyses indicated that the interiors of hollow particles were not really "hollow".     

Changes in thermodynamic interactions at highly immiscible polymer/polymer interfaces due to deuterium labeling

Deuterium labeling has been shown previously to affect thermodynamic interactions at polymer surfaces, polymer/polymer heterogeneous interfaces, and in bulk (away from a surface or interface). However, the changes in polymer-polymer interactions due to deuterium labeling have not been thoroughly investigated for highly immiscible systems. It is shown here that deuterium labeling can influence polymer-polymer interactions at heterogeneous interfaces with highly immiscible systems, namely, polystyrene/poly(2-vinylpyridine) (PS/P2VP), polystyrene/poly(4-vinylpyridine) (PS/P4VP), and polystyrene/poly(methyl methacrylate) (PS/PMMA). Using secondary ion mass spectrometry, segregation of deuterium labeled polystyrene (dPS) in a dPS + unlabeled PS (dPS:hPS) blend layer was observed at the dPS:hPS/hP2VP, dPS:hPS/hP4VP, and dPS:hPS/hPMMA heterogeneous interfaces. However, a reference system involving PS on a PS brush shows no segregation of dPS to the interface.     

A VERSATILE AND REGIOSELECTIVE SYNTHESIS OF VICINAL AZIDOALCOHOLS USING CROSS-LINKED POLY（4-VINYLPYRIDINE） SUPPORTED AZIDE ION UNDER SOLVENT-FREE CONDITIONS

A new polymeric reagent, cross-linked poly（4-vinylpyridine） supported azide ion, [P4-VP]N3, was introduced as polymeric reagents for efficient and regioselective conversion of epoxides to azidohydrins in the presence of cross-linked poly（4-vinylpyridine） supported sulfuric acid, [P4-VP]H2SO4, as a solid proton source and as catalyst under solvent-free conditions. The advantages of this polymeric reagent over some of those reported in the literature are easy work-up procedure and regeneration of the reagent.     

Structure control in PMMA/silica hybrid nanoparticles by surface functionalization

Hydrophilic silica particles need to be hydrophobized to be encapsulated in a polymeric environment, which can be achieved by different methods. We report on the relationship between different hydrophobization techniques of silica and the final structure of poly(methyl methacrylate)/silica hybrid nanoparticles obtained by miniemulsion polymerization. Hydrophobization by cetyltrimethylammonium chloride (CTMA-Cl) uses the ionic interaction between the positively charged ammonium salt and the negatively charged silica surface, as shown by isothermal titration calorimetry. In this case, the interaction between polymer and silica surface needs to be enhanced, so 4-vinylpyridine (4-VP) was used as a co-monomer. Alternatively, the condensation reactions of 3-methacryloxypropyltrimethoxysilane (MPS) and octadecyltrimethoxysilane (ODTMS) were used to provide a covalent bond to the silica surface. The condensation reaction of the trimethoxysilane groups onto the silica surface was proven by Fourier transform infrared spectroscopy and thermogravimetric analysis. Hybrid nanoparticles were successfully formed with silica particles functionalized with the different functionalization agents. However, the structure of the resulting hybrid particles (i.e., the distribution of the silica particles within the polymer matrix) depends on the agent. The MPS-functionalized silica particles copolymerize with poly(methyl methacrylate), leading to a fixation of the silica particles inside the polymer and to a homogeneous distribution. The CTMA-Cl- and ODTMS-functionalized silica particles cannot copolymerize, but aggregate at the interface, leading to a Janus-like structure.     

Efficient and selective oxidation of methyl substituted cycloalkanes by heterogeneous methyltrioxorhenium–hydrogen peroxide systems

Polymer-supported methyltrioxorhenium (MTO) systems are efficient catalysts for the oxidative functionalisation of cyclohexane and cyclopentane derivatives with H₂O₂ as oxygen donor. Using poly(4-vinyl)pyridine and poly(4-vinyl)pyridine-N-oxide as MTO supports, cycloalkanol, cycloalkanediol, cycloalkanone and ω-hydroxy methyl ketone derivatives were obtained in different yields depending on the experimental conditions. Interestingly, cycloalkane dimers were selectively recovered in acceptable to good yields when the oxidation was performed with polystyrene-microencapsulated MTO catalyst. The EPR investigation suggests that the homolytic cleavage of the CH₃–Re bond with formation of CH₃ radicals occurs inside the polystyrene capsule, indicating a possible role of methyl radical in the cycloalkane dimerisation pathway.     

Microporous polystyrene particles for selective carbon dioxide capture

This study presents the synthesis of microporous polystyrene particles and the potential use of these materials in CO(2) capture for biogas purification. Highly cross-linked polystyrene particles are synthesized by the emulsion copolymerization of styrene (St) and divinylbenzene (DVB) in water. The cross-link density of the polymer is varied by altering the St/DVB molar ratio. The size and the morphology of the particles are characterized by scanning and transmission electron microscopy. Following supercritical point drying with carbon dioxide or lyophilization from benzene, the polystyrene nanoparticles exhibit a significant surface area and permanent microporosity. The dried particles comprising 35 mol % St and 65 mol % DVB possess the largest surface area, ～205 m(2)/g measured by Brunauer-Emmett-Teller and ～185 m(2)/g measured by the Dubinin-Radushkevich method, and a total pore volume of 1.10 cm(3)/g. Low pressure measurements suggest that the microporous polystyrene particles exhibit a good separation performance of CO(2) over CH(4), with separation factors in the range of ～7-13 (268 K, CO(2)/CH(4) = 5/95 gas mixture), which renders them attractive candidates for use in gas separation processes.     

A novel catalyzed C-H insertion reactions of hydrogen peroxide by poly(4-vinylpyridine)/methyltrioxorhenium systems

Novel poly(4-vinylpyridine) supported MTO compounds were effective heterogeneous catalysts for the C-H insertion reactions of H₂O₂ into some representative hydrocarbon derivatives. The most relevant outcomes of these oxidations are described.     

硅胶负载聚乙烯吡啶-聚[苯乙烯-顺丁烯二酸]-钯催化剂的结构研究

利用X-光电子能谱、紫外-可见光谱、电子显微镜等技术研究了硅胶负载的聚乙烯吡啶-聚[苯乙烯-顺丁烯二酸]-钯催化剂的结构.发现催化剂中活性组分除钯(0)外,还存在少量钯(Ⅱ).第二种高分子的存在可以影响钯(Ⅱ)的相对含量.催化剂中钯以很小的粒子均匀分布在载体上,因此具有良好的催化加氢性能.     

Core-corona polymer composite particles by self-assembled heterocoagulation based on a hydrogen-bonding interaction

Poly(ethylene glycol dimethacrylate-co-acrylic acid) (poly(EGDMA-co-AA)) small microspheres were effectively self-assembled on poly(ethylene glycol dimethacrylate-co-4-vinylpyridine) (poly(EGDMA-co-VPy)) surfaces to form a core-corona structure with a raspberry-like polymer composite by a hydrogen interaction mechanism through an affinity complex between the carboxylic acid group and pyridine group. The control of coverage of the poly(EGDMA-co-AA) corona on the surface of poly(EGDMA-co-VPy) was studied in detail via adjustment of the nature of the mass ratio between the core and corona. The effects of the pH and solvent used on the morphology of the self-assembled core-corona polymer composites were investigated. The nature of the interaction between the core and corona polymer particles was identified as hydrogen bonding with FT-IR spectroscopy.     

Preparation of micron-sized monodispersed highly monomer- “adsorbed” polymer particles having snow-man shape by utilizing the dynamic swelling method with tightly cross- linked seed particles

Micron-sized, monodispersed highly styrene-“adsorbed” particles having snow-man shape were prepared by the dynamic swelling method (DSM) with tightly cross-linked polymer seed particles as follows. First, 3.8 μm-sized monodispersed polystyrene (PS)/ poly(divinylbenzene) (PDVB) (PS/PDVB = 1/10 wt. ratio) composite particles produced by seeded polymerization utilizing DSM were dispersed in an ethanol/water (6/4, w/w) solution dissolving styrene monomer, and poly(vinyl alcohol) as a stabilizer. Second, water was subsequently added to the dispersion with a micro-feeder at a rate of 2.88 ml/h at room temperature. The cross-linked seed particles adsorbed a large amount of styrene onto the surfaces and resulted in mono-dispersed highly styrene-“adsorbed” snow-man shape particles having about 10 μm in diameter. Received: 16 April 1998 Accepted: 9 June 1998     

Polystyrene(1)/poly(butyl acrylate-methacrylic acid)(2) core-shell emulsion polymers. Part I. Synthesis and colloidal characterization

Polystyrene (PS) (1)/Poly(n-butyl acrylate (BA)-methacrylic acid (MAA)) (2) structured particle latexes were prepared by emulsion polymerization using monodisperse polystyrene latex seed (118 nm) and different BA/MAA ratios. Three main aspects have been investigated: i) the polymerization kinetics; ii) the particle morphology as a function of reaction time; iii) the distribution of MAA units between the water phase and the polymer particles.The amount of MAA in the shell copolymer was found to be the main factor controlling the particle shape and morphology. The shape of the structured particles was, generally, non-spherical, and the shape irregularities increased as a particles was, generally, non-spherical, and the shape irregularities increased as a function of reaction time. At the beginning of the second stage reaction, new small particles were observed, which coalesced onto the PS seed as the polymerization proceeded. The distribution of the MAA groups in the latex particles and the serum was analyzed by alkali/back-acid titration, using ionic exchanged latexes. No MAA groups were detected in the latex serum. Due to the lowTg of the BA-MAA copolymers, alkali conductimetric titrations accounted for all the MAA groups on and within the polymer particles. Therefore, for these systems, this method is not only limited to a thin surface layer, as it is often assumed.     

Effect of molecular weight on the morphology of polystyrene/poly(methyl methacrylate) composite particles prepared by the solvent evaporation method

The effect of molecular weight on the morphology of polystyrene (PS)/poly(methyl methacrylate) (PMMA) composite particles was investigated. PS/PMMA composite particles with different molecular weights (M*=MwPS+MwPMMA)/2 approximately 2x10(4)-1x10(6) g.mol(-1)) were prepared by the release of toluene (T) from PS/PMMA/T (1/1/24, w/w/w) droplets dispersed in an aqueous solution of polyoxyethylene nonylphenyl ether nonionic surfactant (Emulgen 911). As T evaporated, the spherical droplets phase separated, resulting in snowmanlike composite particles with Janus morphology. The nonspherical shape was closely related to the morphology, which depended on M*. The interfacial tension between the phase-separated PS and PMMA phases increased with an increase in M*, and this would allow the formation of the snowmanlike shape to decrease the interfacial area between the PS and the PMMA phases.     

Characterization of the nanomorphology of polymer-silica colloidal nanocomposites using electron spectroscopy imaging

The internal nanomorphologies of two types of vinyl polymer-silica colloidal nanocomposites were assessed using electron spectroscopy imaging (ESI). This technique enables the spatial location and concentration of the ultrafine silica sol within the nanocomposite particles to be determined. The ESI data confirmed that the ultrafine silica sol was distributed uniformly throughout the poly(4-vinylpyridine)/silica nanocomposite particles, which is consistent with the "currant bun" morphology previously used to describe this system. In contrast, the polystyrene/silica particles had a pronounced "core-shell" morphology, with the silica sol forming a well-defined monolayer surrounding the nanocomposite cores. Thus these ESI results provide direct verification of the two types of nanocomposite morphologies that were previously only inferred on the basis of X-ray photoelectron spectroscopy and aqueous electrophoresis studies. Moreover, ESI also allows the unambiguous identification of a minor population of polystyrene/silica nanocomposite particles that are not encapsulated by silica shells. The existence of this second morphology was hitherto unsuspected, but it is understandable given the conditions employed to synthesize these nanocomposites. It appears that ESI is a powerful technique for the characterization of colloidal nanocomposite particles.     

Synthesis of bifunctional core–shell particles with a porous zeolite core and a responsive polymeric shell

The aim of our work is the synthesis and characterization of colloidal core–shell particles with a zeolite core and an environmentally responsive shell. We have synthesized colloidal ZSM-5 zeolite and modified the surface with 3-(trimethoxysilyl)propyl methacrylate in order to introduce double bonds at the surface. The cross-linked polymeric shell was prepared by precipitation polymerization using the functionalized zeolite particles as seeds. We employed thermoresponsive poly(N-isopropylacrylamide) and pH-responsive poly(vinylpyridine) as the polymeric shell, respectively. The temperature- and pH-depending swelling and deswelling of the core–shell particles were characterized with dynamic light scattering techniques. Transmission electron microscopy pictures show the morphology of the synthesized particles. It is proposed that these types of bifunctional core–shell particles could be of use for controlled uptake and release applications and separation of molecules.     

Novel method for catalyst immobilization using an ionic polymer: a case study using recyclable ytterbium triflate

A series of ionic polymers prepared by quarternization of cross-linked poly(4-vinylpyridine/styrene) (P/S) resins with several alkylating agents, including short-length PEG mesylate were used as polymeric supports to immobilize Yb(OTf)₃. The efficacy of the polymer-bound catalyst was examined in a Mannich-type reaction.     

Fabrication and morphology of spongelike polymer material based on cross-linked sulfonated polystyrene particles

A novel spongelike polymer material has been fabricated by γ-ray induced polymerization of methylmethacrylate (MMA) in an emulsion containing cross-linked sulfonated polystyrene (CSP) particles. Scanning electron microscopy (SEM) images reveal that the spongelike structure is made up of interlinked nanosized PMMA particles with micrometer-sized CSP-PMMA particles embedded inside. The nitrogen adsorption isotherm discloses that the spongelike material has a high specific surface area of 29 m(2)/g and a narrow pore size distribution of 60-120 nm. The formation mechanism is discussed in this paper, which indicates that the key steps to form the spongelike material include a Pickering emulsion stabilized by the CSP particles, followed by the swelling process of MMA into these particles. This approach offers a more convenient alternative to prepare polymeric spongelike material without any etching procedure.     

Fabrication of cage-like particles via unstable seeded dispersion polymerization: A new concept in the polymerization-induced self-assembly

The formation mechanism of hollow micron-sized polystyrene (PS) particles having numerous dents on the surface, so-called cage-like particles, obtained from seeded dispersion polymerization (SDP) of 2-ethylhexyl methacrylate (EHMA) with low molecular weight (MW) PS particles stabilized by poly(vinyl alcohol) (PVA) in the presence of hexadecane droplets was investigated. It was found that association of poly(2-ethylhexyl methacrylate) (PEHMA)/hexadecane phases which occurs due to the instability of the obtained composite particles followed by a diffusion of PS ellipsoidal particles into each other is the main process responsible for the production of such unique morphology. Time course monitoring of the SDP showed that diffusion of hexadecane and/or PS and/or PEHMA phase into PS/PEHMA/hexadecane composite particles through PS shell which happens based on Ostwald ripening is the main phenomenon which results in the formation of the dents on the surface of final particles. Moreover, the experimental results revealed that in this reaction system, the polymerization develops in a faster manner rather than the SDP employing seed particles having higher MWs. Furthermore, it was observed that particles with different surface morphologies can be produced by using different hydrocarbons. The elimination of small particles which are produced in addition to the cage-like ones via decreasing the concentration of the stabilizer was another interesting finding of this research. The acquired results showed that unstable SDP is expected to be a new concept in polymerization-induced self-assembly (PISA) which employs instability of a dispersion for self-assembly of polymeric particles, and therefore, production of polymeric unique objects.