Investigations of Pulse‐Plasma‐Polymer Coating on TiO2 Nanoparticles and Their Dispersion

An amorphous acrylic acid (AA) polymer coating was generated on TiO₂ nanoparticles through pulse radio frequency (RF) plasma polymerization. The AA plasma synthesis mechanism was studied by its optical emission spectrum. The chemical structures of AA–plasma‐polymer were carefully investigated by Fourier transform infrared spectroscopy (FTIR). The dispersion behaviors of AA‐coated and uncoated TiO₂ nanoparticles in glycol solution were characterized by ultraviolet absorbency and particle size distribution measurements. The results showed that the aggregation of TiO₂ nanoparticles in glycol solution was effectively lowered and the dispersion was improved a lot after AA–plasma‐polymer coating. The pulse plasma coating parameters played an important role in the dispersion enhancement of TiO₂ nanoparticles. By properly regulating the pulse discharge parameters, the system could gain the highest radical–monomer reactions rate, the most compatible functional groups on the nanoparticles, and the best dispersion in the background media.     

Preparation and Characterization of Poly(Methyl Methacrylate) Coated TiO2 Nanoparticles

Titanium dioxide (TiO₂) nanoparticles were modified with poly(methyl methacrylate) (PMMA) to improve the dispersion stability of the nanoparticles in a dielectric medium and to reduce the density mismatch between TiO₂ and a dielectric medium for a microcapsule‐type electrophoretic display application. Nanoparticles were coated with PMMA by in situ dispersion polymerization. The PMMA‐coated TiO₂ nanoparticles were characterized by fourier transform‐infrared spectrometrey (FT‐IR), electrophoretic light scattering (ELS), and scanning electron microscopy (SEM). Density of PMMA‐coated TiO₂ nanoparticles was found to be dependent on the thickness of the PMMA coating on the nanoparticles. An increase of thermal stability of the PMMA layer and the contents of PMMA on the surface of the nanoparticles were measured via thermogravimetric analysis (TGA).     

Surface-initiated atom transfer radical polymerization from TiO2 nanoparticles

Two kinds of hydrophilic polymers, poly(oxyethylene methacrylate) (POEM) and poly(styrene sulfonic acid) (PSSA), were grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. Chlorine modified TiO₂ nanoparticles (TiO₂-Cl), the ATRP initiators, were synthesized by the reaction of -OH in TiO₂ with 2-chloropropionyl chloride (CPC). FT-IR, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS) clearly showed that the polymer chains were successfully grafted from the surface of TiO₂ nanoparticles. The hydrophilically modified TiO₂ nanoparticles have a better dispersion in alcohol than unmodified nanoparticles, as revealed by transmission electron microscopy (TEM). It was also found that the polymer grafting did not significantly alter the crystalline structure of the TiO₂ nanoparticles according to the X-ray diffraction (XRD) patterns. Grafting amounts were 10% of the weight for both TiO₂-POEM and TiO₂-PSSA nanoparticles, as determined by thermogravimetric analysis (TGA).     

In situ Radical Copolymerization in Presence of Surface‐Modified TiO2 Nanoparticles: Influence of a Double Modification on Properties of Unsaturated Polyester (UP) Nanocomposites

In the preparation of nanocomposites, there is competition between the dispersion of nanoparticles and the formation of agglomerates. In this study, radical copolymerization of ethyl acrylate and methyl methacrylate initiated by 2,2‐azobis (isobutyro) nitrile (AIBN) was performed, in the presence of titanium oxide (TiO₂) nanoparticles modified in a new approach; a good dispersion of the nanoparticles in the unsaturated polyester (UP) matrix was obtained. The TiO₂ nanoparticles were exposed to 3‐(methacryloxy) propyl trimethoxy silane as the coupling agent. The presence of coupling agent‐grafted TiO₂ nanoparticles in the copolymerization process resulted in the formation of a polymeric layer on the surface of the TiO₂ nanoparticles (doubly modified‐TiO₂). The grafting of coupling agent molecules and consequently copolymer macromolecular chains onto the surface of TiO₂ nanoparticles was investigated using Fourier transform infrared (FTIR) analysis. It found that the formation of an acrylate layer on the surface of nanoparticles was successful. Then, unsaturated polyester (UP)/TiO₂ nanocomposites were prepared. The morphology was studied using transmission electron microscopy (TEM). Mechanical properties and ultraviolet visible (UV/VIS) spectroscopy of various samples, including the doubly modified‐TiO₂ nanoparticles, with different nanoparticle inclusions and the unmodified‐TiO₂ nanoparticles, were also investigated. The results showed the doubly modified‐TiO₂ nanoparticles, compared to those of unmodified‐TiO₂, had better nanoparticle dispersion causing improvement in the mechanical properties and UV shielding.     

The role of poly(methacrylic acid) conformation on dispersion behavior of nano TiO2 powder

To exploit the advantages of nanoparticles for various applications, controlling the dispersion and agglomeration is of paramount importance. Agglomeration and dispersion behavior of titanium dioxide (TiO₂) nanoparticles was investigated using electrokinetic and surface chemical properties. Nanoparticles are generally stabilized by the adsorption of a dispersant (polyelectrolyte) layer around the particle surface and in this connection ammonium salt of polymethacrylic acid (Darvan C) was used as dispersant to stabilize the suspension. The dosages of polyelectrolyte were optimized to get best dispersion stability by techniques namely particle charge detector (13.75 mg/g) and adsorption (14.57 mg/g). The surface charge of TiO₂ particles changed significantly in presence of dispersant Darvan C and isoelectric point (iep) shifted significantly towards lower pH from 5.99 to 3.37. The shift in iep has been quantified in terms of free energy of interaction between the surface sites of TiO₂ and the adsorbing dispersant Darvan C. Free energies of adsorption were calculated by electrokinetic data (−9.8 RT unit) and adsorption isotherms (−10.56 RT unit), which corroborated well. The adsorption isotherms are of typical Langmuir type and employed for calculation of free energy. The results indicated that adsorption occurs mainly through electrostatic interactions between the dispersant molecule and the TiO₂ surface apart from hydrophobic interactions.     

Rheology and Dispersion Behavior of Ethylene‐Vinyl Acetate Copolymers/TiO2 Masterbatches Prepared by Melt‐Compounding

The rheology and dispersion behavior of ethylene‐vinyl acetate (EVA) copolymer/TiO₂ masterbatches prepared by melt‐compounding were investigated. The pure EVA exhibits obviously pseudoplastic behavior and the apparent viscosity decreases remarkably at experimental temperatures, especially in the range of 100–500 s^?1. The EVA/TiO₂ masterbatches exhibit similar shear rheology behavior with pure EVA and the apparent viscosities are obviously higher than that of pure EVA when the TiO₂ content is above 10 wt.%. Field‐emission scanning electron microscopy (FE‐SEM) and energy dispersive x‐ray spectroscopy (EDX) show that relatively low TiO₂ loading and moderate shear rate are helpful for the improvement of dispersion behavior of TiO₂ nanoparticles; moreover, the dispersion behavior of TiO₂ greatly influences the melt viscosity. The extensional rheology of pure EVA decreases with increasing extension rate, especially at low melt temperatures. EVA/TiO₂ masterbatches have similar extensional rheology behavior as pure EVA and the TiO₂ loading has almost no influence on the extensional viscosity of materbatches.     

Mechanically induced changes in amylose structure and effect on thermal behavior in the presence of TiO2 nanoparticles

Thermal behavior of amylose/TiO₂ films under ultrasonic irradiation was investigated, and the final product of each process was applied to prepare amylose/TiO₂ nanocomposite films. The effects of different degradation techniques on thermal behavior, crystallinity, and molecular weight distribution of amylose were surveyed. The evaluations of structural changes and thermal behaviors were performed by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetry analysis, FT-IR spectroscopy, and scanning electron microscopy. The XRD results clarified that the crystalline shape of amylose molecules formed is an A-type crystal due to the sonophotocatalytic processing, while the FT-IR spectra does not approve any chemical change in amylose structure. The DSC data submitted a broad endothermic peak for amylose. In the case of high loading of nanoparticles, the endothermic analysis results and diffraction peaks for the sonophotocatalytic process were not significant. This indicates that the length of amylose chains through the sonophotocatalytic degradation became smaller. An increase at the loading of TiO₂ improved the hydrophilic properties of amylose/TiO₂ films, which leads to the modification of water absorption behavior. Mechanical properties of amylose/TiO₂ films were affected by the uniform dispersion of TiO₂ in the polymer matrix.     

Weathering performance of the polyurethane nanocomposite coatings containing silane treated TiO2 nanoparticles

Nano-filled polyurethane coatings were prepared by incorporation of various amounts of untreated and amino propyltrimethoxy silane (APS) treated TiO₂ nanoparticles. TEM and AFM techniques were employed to evaluate dispersion of nanoparticles and surface morphology of the coating, respectively. TEM observations revealed that the APS treated nanoparticles have a better dispersion and smaller agglomeration, compared with their untreated counterparts. AFM images revealed that, surface roughness of the coatings increased with increasing of nanoparticles content, however, at equal level of loadings; coatings containing untreated nanoparticles showed a higher surface roughness.Colour changes (colour coordinates data measurements), mechanical properties and surface morphology of the PU nanocomposite coatings, before and after being exposed to a QUV chamber for 1000 h were studied using various techniques. The results revealed that addition of 0.5 to 1.0 wt.% APS treated TiO₂ nanoparticles reduces photocatalytic activity, and improves the weathering performance PU nanocomposite coatings. Tensile strength measurements showed significant improvement of mechanical properties of PU coatings containing modified TiO₂ nanoparticles. Results also revealed that the colour measurement is a useful technique and non destructive method for evaluation of coating's performance against weathering conditions. The experimental results showed a good correlation between different techniques findings.     

Preparation and characterization of polyethylene/TiO2 nanocomposites

The rheological behaviour, dispersion, crystallization behavior, mechanical properties, fracture surface morphology of polyethylene (PE)/TiO₂ nanocomposites prepared by melt compounding were investigated using rheometer, energy dispersive X-ray spectrometer (EDX), polarized microscopy, impact tester, universal testing machine and field-emission scanning electron microscopy (FE-SEM). The rheological analysis indicated a fine dispersion of TiO₂ during the melt compounding. The large scaled surface dispersion of TiO₂ nanoparticles was revealed by the EDX composition distribution maps. The introduction of 2.0 wt% TiO₂ in composites improved the mechanical properties significantly compared to neat PE, and resulted in 45% increase in notched impact strength. Moreover, the further analysis and discussion showed the mechanical properties of the composites were controlled by the dispersion conditions of TiO₂ and its nucleating effect on PE crystallization.     

The enhanced photocatalytic activity of CdS/TiO2 nanocomposites by controlling CdS dispersion on TiO2 nanotubes

CdS/TiO₂ nanocomposites were prepared via a simple wet chemical method, and characterized through X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their ability to degrade Acid Rhodamine B was investigated under visible light irradiation. The results indicate that CdS/TiO₂ nanocomposite with a mass ratio of 4:1(TiO₂:CdS) showed high photocatalytic activity and the CdS loaded on TiO₂ nanotube surface exhibited a hexagonal phase. The dispersion of CdS on TiO₂ nanotube surface had an important effect on the degradation efficiency of pollutant, which provides a strategy for practical industry application.     

Preparation and Characterization of Nano‐TiO2 Doped Polystyrene Materials by Melt Blending for Inertial Confinement Fusion

Abstract

Nano‐TiO₂ doped polystyrene (PS) materials (TiO₂‐d‐PS) used for inertial confinement fusion (ICF) targets were prepared by means of melt blending. The effect of the pretreatment process, including coupling agents and ultrasonic dispersion on nano‐TiO₂, was studied. Tensile tests were conducted to evaluate the mechanical properties of the TiO₂‐d‐PS materials. Scanning electron microscopy (SEM) combined with energy dispersive spectroscopy (EDS) was used to characterize the degree of dispersion of nano‐TiO₂ in the PS matrix. Transmission electron microscopy (TEM) and dynamic contact angle (DCA) measurements were introduced to demonstrate the surface state of untreated and pretreated nano‐TiO₂. The results showed that coupling agents improved the interfacial adhesion between the PS matrix and dopants; ultrasonic dispersion contributed to the increase in the tensile properties of the TiO₂‐d‐PS materials. The dispersion stability of nano‐TiO₂ powder and the stability of the TiO₂‐d‐PS materials were significantly enhanced through pretreatment, which was supported by the increase in the DCA when the nano‐TiO₂ was pretreated by the coupling agent. The results of SEM and EDS indicated that the nano‐TiO₂ dispersed homogeneously in the PS matrix. The pretreatment process is an effective way to break the aggregation of nano‐TiO₂, which was confirmed by TEM results. Melt blending is a feasible method to prepare PS doped high Z element ICF target materials.     

Synthesis and characterization of TiO2/Ag/polymer ternary nanoparticles via surface-initiated atom transfer radical polymerization

We report on the novel ternary hybrid materials consisting of semiconductor (TiO₂), metal (Ag) and polymer (poly(oxyethylene methacrylate) (POEM)). First, a hydrophilic polymer, i.e. POEM, was grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. These TiO₂-POEM brush nanoparticles were used to template the formation of Ag nanoparticles by introduction of a AgCF₃SO₃ precursor and a NaBH₄ aqueous solution for reduction process. Successful grafting of polymeric chains from the surface of TiO₂ nanoparticles and the in situ formation of Ag nanoparticles within the polymeric chains were confirmed using transmission electron microscopy (TEM), UV-vis spectroscopy, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). FT-IR spectroscopy also revealed the specific interaction of Ag nanoparticles with the CO groups of POEM brushes. This study presents a simple route for the in situ synthesis of both metal and polymer confined within the semiconductor, producing ternary hybrid inorganic-organic nanomaterials.     

Improving the electrical catalytic activity of Pt/TiO<Subscript>2</Subscript> nanocomposites by a combination of electrospinning and microwave irradiation

One of the greatest challenges in preparing TiO₂-based oxygen electrodes for PEM fuel cells is increasing the electrical catalytic activity of Pt nanoparticle/TiO₂ composites by improving the dispersion of Pt. This article describes a new way for improving the dispersion of Pt nanoparticles by depositing them on TiO₂ fibers and using microwave irradiation. The Pt nanoparticles used in this experiment is about 5 nm in diameter and the diameter of TiO₂ fibers could be controlled ranging from 30 to 60 nm and Pt nanoparticles still keep their size when the deposition amount is increased on the surface of TiO₂ fibers. The Pt nanoparticles were highly dispersed without agglomeration even at a weight percentage of composites as high as 40%. The position of Pt nanoparticles located in the fiber and the composition of Pt/TiO₂, which had great influence on the electric conductivity and electrical catalytic activity of the composite, could be easily controlled.     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.     

Enhancement of the photocatalytic activity of TiO2 nanoparticles by surface-capping DBS groups

TiO₂ nanoparticles capped with sodium dodecylbenzenesulfonate (DBS) are synthesized by a sol-hydrothermal process using tetrabutyl titanate and DBS as raw materials. The effects of surface-capping DBS on the surface photovoltage spectroscopy (SPS), photoluminescence (PL) and photocatalytic performance of TiO₂ nanoparticles are principally investigated together with their relationships. The results show that the surface of TiO₂ nanoparticles can be well capped by DBS groups while the pH value and added DBS amount are controlled at 5.0 and 2% of TiO₂ mass weight, respectively, and the linkage between DBS groups and TiO₂ surfaces is mainly by means of quasi-sulphonate bond. The intensities of SPS and PL spectra of TiO₂ obviously decrease after DBS-capping, while the activity can greatly increase during the photocatalytic degradation of Rhodamine B (RhB) solution, which are mainly attributed to the electron-withdrawing character of the DBS groups. Moreover, the enhancement of photocatalytic activity of DBS-capped TiO₂ is also related to the increase in the capability for adsorbing RhB.     

Preparation and characterization of poly(lactic acid)-grafted TiO2 nanoparticles with improved dispersions

Poly(lactic acid) (PLA)-grafted TiO₂ particles were prepared by in situ melt polycondensation of lactic acid onto the surface of TiO₂ nanoparticles. The resulting products were characterized by FTIR, XPS, TG-FTIR, XRD analysis and electron microscopy observation so as to have a better understanding of bonding between the graft polymer and nanoparticles. New characteristic peaks of Ti-carboxylic coordination bond, the changes in the relative intensities of the infrared absorption bands of graft polymer and the two decomposition stage of PLA-grafted TiO₂ confirmed that PLA was grafted on the surface of TiO₂ nanoparticles. By attachment of PLA, the PLA-grafted TiO₂ samples exhibited much better dispersion and a slightly larger particle size than bare TiO₂ particles. PLA-grafted TiO₂ nanoparticles will find wide applications in biomedical and eco-friendly materials, especially as fillers in PLA matrix.     

TiO2/polyaniline nanocomposite films prepared by magnetron sputtering combined with plasma polymerization process

Radiofrequency plasma polymerization in combination with direct current reactive magnetron sputtering is utilized for the synthesis of TiO₂/plasma polymerized aniline nanocomposite thin films. In the composite film, X-ray diffraction measurements reveal formation of nanocrystalline rutile TiO₂ of crystallite size 3.6 nm. Due to continuous bombardment of plasma species during simultaneous magnetron sputtering and plasma polymerization, the precursors of polymerization are broken and few functional groups are retained in the composite film. The plasma polymerized aniline has the direct optical band gap of 3.55 eV and the nanocrystalline rutile TiO₂ is wide gap semiconductor with indirect gap of 3.20 eV which suggests the existence of an energy barrier at the interface in the composite form. The ac conductivity of composite film shows significant improvement as compared to plasma polymerized aniline film and sputtered rutile TiO₂ film. The composite film may find potential application as antistatic coatings.     

Surface-modified antibacterial TiO2/Ag nanoparticles: Preparation and properties

Studies were performed on surface modification of antibacterial TiO₂/Ag⁺ nanoparticles by grafting γ-aminopropyltriethoxysilane (APS). The interfacial structure of the modified particles was characterized by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and thermogravimetric analysis. The thickness of the surface layer was determined by using Auger electron spectroscopy (AES). The results show that APS is chemically bonded to the surface of antibacterial TiO₂/Ag⁺ nanoparticles. Furthermore, the modified particles were mixed in PVC to prepare composites whose antibacterial property was investigated. The results suggest that surface modification has no negative effect on antibacterial activity of TiO₂/Ag⁺ nanoparticles and PVC-TiO₂/Ag⁺ composites exhibits good antibacterial property.     

Spectroscopic properties and photophysics of the synthesized compound 5-nitro-benzo[b]thiophene-2-carboxylic acid in non-polar/polar media and in the presence of TiO2 nanoparticles

The present work investigates by electrochemical and steady-state and time-resolved spectroscopic methods a synthesized compound 5-nitro-benzo[b]thiophene-2-carboxylic acid (5NBTC), both in normal solvents and in the presence of TiO₂ nanoparticles to reveal the nature of the photophysical processes involved. From the present experimental observations it is inferred that both in the ground state and the excited electronic state S₁, there exists a strong binding between -COOH functionality of 5NBTC and TiO₂ nanoparticles. However, the rupture of this binding in the presence of excess TiO₂, as apparent from the steady-state and time-resolved spectroscopic measurements, is responsible for the increase in radiative transitions. Formations of aggregations of TiO₂ nanoparticles at higher concentrations appear the cause of such rupturing. The redox potential measurements by cyclic voltammetry and theoretical computations by time-dependent density functional theory (TD-DFT) with B3LYP/6-311 G(d, p) basis function implemented in the Gaussian package confirm the electron accepting nature of 5NBTC and hence no electron transfer is possible between the organic compound and TiO₂ nanoparticles. It is most likely that the interaction model between 5NBTC and TiO₂ nanoparticles should be that the -COOH group of 5NBTC molecule coordinates either directly or through a hydrogen bond to the TiO₂ surface.     

Surface state of TiO2 treated with low ion energy plasma

The effect of low pressure radio frequency (rf) plasma treatment on TiO₂ surface states has been studied using X-ray photoelectron spectroscopy. Three different oxidation states of oxygen in untreated TiO₂ powder were observed, which suggests the existence of adsorbed water and carbon on the surface. The ratio of oxygen to titanium (O/Ti) was decreased for the low ion dose plasma treated samples due to desorption of water from the surface. In the case of Ti 2p about 20% of surface states were converted to Ti³⁺ 2p_3/2 state after plasma treatment with a very good stability, whereas untreated TiO₂ remained mostly as Ti⁴⁺ state. A rapid decrease in the ratio of carbon to titanium (C/Ti) at TiO₂ surface was also observed after plasma treatment and more than 90% of carbon atoms were removed from the surface. Therefore, the plasma treatment of TiO₂ has advantages to surface carbon cleaning, increasing O⁻ and Ti³⁺ surface states, hence improving the activity of TiO₂ for different environmental, energy and biological applications.