顶空毛细管气相色谱法测定非那雄胺中有机溶剂的残留量

建立了顶空毛细管气相色谱法测定非那雄胺中二氯甲烷和氯仿两种有机溶剂残留量的方法,并讨论了平衡温度、平衡时间、盐效应对测定的影响。分析结果表明:该法可将两种残留有机溶剂完全分离,具有较好的线性(相关系数分别为0.999 7和0.999 8),检出限为3.2μg/L和0.094μg/L,测定结果的相对标准偏差分别为1.33%和0.89%,样品回收率分别为94%和96%。     

顶空气相色谱法测定盐酸托莫西汀中有机溶剂残留量的研究

建立了盐酸托莫西汀中有机溶剂残留量的顶空气相色谱分析方法.选用大口径HP-快速GC残留溶剂柱为分离柱,FID为检测器,外标法进行定量,并对顶空平衡温度、平衡时间、供试品溶液的制备方法对残留有机溶剂测定的影响进行了研究.甲醇、乙醚、正己烷、乙酸乙酯、四氢呋喃的线性范围分别为 0.41～8.10 μg/mL(r=0.9999)、0.15～3.00 μg/mL(r=0.9995)、0.20～4.01 μg/mL(r=0.9991)、0.32～6.35 μg/mL(r=0.9999)、0.36～7.11 μg/mL(r=0.9999);平均回收率范围96.30%～105.47%,精密度RSD(n=6)2.1%～3.7%;检出限分别为0.2、0.008、0.003、0.04、0.04 μg/mL.     

顶空气相色谱-质谱法同时测定蜂蜜中57种挥发性有机溶剂残留

建立了顶空气相色谱-质谱(HS-GC/MS)同时测定蜂蜜中57种挥发性有机溶剂(包括烷烃类、芳香烃类、醇类、酮类、酯类、醚类)残留量的分析方法。蜂蜜样品在密封的顶空瓶中用水溶解后,在顶空仪中于80 ℃下平衡30 min,使气-液两相达到动态平衡。采用DB-624毛细管色谱柱(60 m×0.25 mm×1.40 μm)对57种有机溶剂进行分离,GC/MS测定,外标法定量。该方法对于烷烃类、芳香烃类和醚类挥发性有机溶剂在0.005～0.2 μg、酯类0.05～2.0 μg、酮类0.5～20 μg、醇类2.5～100 μg范围内线性关系良好,相关系数均大于0.996。对于烷烃类、芳香烃类和醚类挥发性有机溶剂在1.0～20 μg/kg、酯类10～200 μg/kg、酮类100～2000 μg/kg、醇类500～10000 μg/kg添加范围内的平均添加回收率为61.0%～113.1%,相对标准偏差为1.9%～9.8%。对于烷烃类、芳香烃类和醚类挥发性有机溶剂的检出限为1.0 μg/kg、酯类10 μg/kg、酮类100 μg/kg、醇类500 μg/kg。该方法操作简单、快速,灵敏度和准确度高,适用于蜂蜜样品中多种挥发性有机溶剂残留量的同时检测。     

毛细管气相色谱法同时测定α-硫辛酸中4种有机溶剂残留量

采用毛细管气相色谱法测定α-硫辛酸中环已烷、乙酸乙酯、苯和丙酮的含量。选用HP-FFAP色谱柱、程序升温、FID检测器,载气为氮气,以二氯甲烷为内标法进行定量。在选定的色谱条件下,4种有机溶剂残留物浓度与相应色谱峰呈良好的线性关系,平均回收率为99.8%～100.6%,RSD为0.82%～1.33%(n=3),检出限为7.28～13.46μg/mL。该方法适用于α-硫辛酸样品有机溶剂残留量的测定。     

自动顶空毛细管气相色谱法测定水中8种苯系物

建立自动顶空-毛细管气相色谱同时测定水中8种苯系物的方法.采用stabilwax-DA色谱柱,对平衡温度、平衡时间等顶空条件进行了优化,并对水中苯系物进行测定.8种苯系物平均加标回收率为93.3%～115.0%,检出限为1.2～2.0 μg/L,测定结果的相对标准偏差为1.8%～7.3%(n=6).该法操作简单、灵敏度高、重现性好,可以满足饮用水中苯系物的测定.     

顶空气相色谱法测定氟尼辛葡甲胺原料药中有机溶剂残留量

建立了氟尼辛葡甲胺原料药中乙酸乙酯、甲醇、异丙醇、乙醇和乙腈有机溶剂残留量的顶空气相色谱分析方法。以HP-FFAP色谱柱(30 m×0.32 mm×1.0 μm)为分离柱,火焰离子化检测器检测,外标法定量,并考察了顶空平衡温度、平衡时间等对残留有机溶剂测定的影响。实验结果表明,在顶空平衡温度为90 ℃、平衡时间为30 min条件下获得较好的定量结果。乙酸乙酯、甲醇、异丙醇、乙醇和乙腈的线性范围分别为0.40～7.93 mg/L (r=0.9998)、7.32～146.48 mg/L (r=0.9996)、4.53～90.61 mg/L (r=0.9999)、3.62～72.32 mg/L (r=0.9998)和2.31～46.24 mg/L (r=0.9996);平均回收率范围为95.96%～100.31%,精密度(以相对标准偏差计,n=6)为1.97%～3.28%;检出限分别为0.08、0.9、0.2、0.4和0.3 mg/L。利用该方法对实际样品氟尼辛葡甲胺原料药中有机溶剂残留量进行了检测。结果表明,该样品中含有异丙醇和乙醇,其含量分别为177.44 μg/g与69.32 μg/g。本方法快速、灵敏、准确,适用于氟尼辛葡甲胺原料药中残留溶剂的检测。     

顶空气相色谱-质谱法测定ABS塑料玩具中丙烯腈和苯乙烯的残留量与迁移量

该文建立了ABS塑料玩具中丙烯腈和苯乙烯两种单体残留量与迁移量的顶空气相色谱－质谱测定方 法。首先对残留量测定方法的顶空平衡时间和平衡温度进行了优化,然后以模拟汗液和模拟唾液为迁移基 质,对迁移量测定方法的顶空平衡时间、平衡温度、取样体积和盐析条件进行了优化,并将其应用于市售38 件 ABS 玩具实际样品的检测。结果显示：残留量方法测定丙烯腈和苯乙烯的定量下限分别为 0. 4 mg/kg 和 1. 0 mg/kg,0. 4～2 000 mg/kg线性范围内相关系数（r 2 ）不低于 0. 999 8,加标回收率为 93. 0% ~ 108%,相对标 准偏差（RSD）不高于7. 2%。迁移量方法测定丙烯腈和苯乙烯的定量下限分别为1. 0 μg/L和0. 05 μg/L,0. 05～ 100 μg/L 线性范围内相关系数（r 2 ）不小于 0. 998 1,加标回收率为 88. 4% ~ 104%,RSD ≤ 9. 5%。该方法简便、 快速、灵敏、准确,适用于ABS玩具中丙烯腈和苯乙烯残留量与迁移量的测定。     

毛细管色谱法测定芳香异羟肟酸二丁基锡中有机溶剂残留量

建立了毛细管气相色谱法测定芳香异羟肟酸二丁基锡中的有机溶剂残留量.采用HP-5 (5%苯基甲基聚硅氧烷)毛细管色谱柱,FID检测器.载气为N2,柱温为45 ℃,检测器温度为160 ℃,流速为1.2 mL/min,分流比为20∶1,四氢呋喃为内标进行测定.结果表明: 甲醇、无水乙醇、三氯甲烷、正己烷、苯的线性范围分别为: 7.9～63.2 μg/mL (r=0.9991),8.69～69.52 μg/mL (r=0.9999),19.77～158.16 μg/mL (r=0.9990),295.6～2364.8 μg/mL (r=0.9996),8.74～69.92 μg/mL (r=0.9996),平均回收率分别为104.2%、 98.8%、 97.9%、 103.1%和102.0%,RSD分别为1.6%、 2.3%、 2.1%、 3.8%和1.9% (n=9);检出限分别为3.16、 3.47、 23.90、 1.97和0.87 ng.方法可用于有机溶剂残留量的测定.     

顶空毛细管气相色谱法测定伊拉地平中有机溶剂的残留量

建立测定伊拉地平中有机溶刺乙醇、二氯甲烷、乙酸乙酯、吡啶残留量的顶空毛细管柱气相色谱法.方法具有良好的线性,测定结果的相对标准偏差小于2%(n=5),回收率为98.7%～99.8%.乙醇、二氯甲烷、乙酸乙酯、吡啶的检出限分别为2.5、6、1、10 μg/mL.经方法学验证,该方法灵敏度、准确度均达到有机溶剂测定的要求,可用于伊拉地平原料药中有机溶剂残留量的测定.     

微池热萃取-二次热解析-气相色谱法测定乳粉中有机溶剂的残留量

提出了微池热萃取-二次热解析-气相色谱法测定乳粉中12种有机溶剂残留量的方法。选择平衡温度和吹扫时间分别为80℃和30min,用DB-624弹性石英毛细管柱(60m×0.32mm,1.8μm)分离,火焰离子化检测器检测。12种有机溶剂的质量分数均在0.01～0.5mg.kg-1范围内与其峰面积呈线性关系,测定下限(10S/N)在0.003 7～0.011mg.kg-1之间。加标回收率在91.5%～110%之间,相对标准偏差(n=6)在2.27%～3.01%之间。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.