17O-NMR spectroscopy to study the coordination of oxygen-based ligands to lanthanide ions in solution

The number of oxygen-based ligands coordinated to lanthanide ions influences the physical and chemical properties of lanthanide complexes, making this number important to study. We used peak shifts in ¹⁷O-NMR spectroscopy to determine the number of individual nonhydroxyl-oxygen-based ligands coordinated to Dy³⁺. Oxygen-containing organic solvents were used as models to represent oxygen-based ligands to explore the scope of the technique because they contain a range of functional groups that have different electron-donating abilities and steric bulk. The measured coordination numbers of dimethylformamide, dimethyl sulfoxide, acetone, diethyl ether, tetrahydrofuran, di-isopropyl ketone, and hexamethyl acetone were consistent with reasonable values, indicating that ¹⁷O-NMR spectroscopy is a useful technique to study the coordination chemistry of nonhydroxyl ligands to lanthanide ions in solution.     

Studies of lithium and sodium complexation by silicon podand solvents

The complex formation of lithium and sodium ions with silicon podand solvents: phenyl-tris(1,4-dioxapentyl) silane (PhSi23) and ethyl-tris(1,4-dioxapentyl) silane (EtSi23) has been studied by FTIR, ¹H-, ¹³C-, ⁷Li- and ²³Na NMR. The far FTIR spectra show that the Li⁺ cations fluctuate very fast whereas Na⁺ cations are still localised between the oxygen atoms of the oxaalkyl chains. The ⁷Li NMR spectra prove that one Li⁺ cation can be coordinated not only by one but also two silicon podand molecules. The concentration dependence of the molar conductivity of LiClO₄ in the podand solvents indicates charge transfer between ion clusters.     

Phosphate additives determination in meat products by 31-phosphorus nuclear magnetic resonance using new internal reference standard: hexamethylphosphoroamide

New ³¹P NMR internal reference standard - hexamethylphosphoroamide (HMPA) was applied for determination of added polyphosphates and their ionic forms in raw pork meat and meat products. Phosphate species were determined after extraction with a boric acid buffer (pH = 9) and EDTA solution, using internal standard (HMPA) procedure. Hexamethylphosophoroamide was also used as the NMR reference standard. Linear correlations between phosphates and polyphosphate concentrations and ³¹P NMR signal areas were found in the range 81-5236 mg P/dm³, presenting 95-99% recovery and variation coefficient (CV) ≤ 5%. Studied HMPA procedure revealed shorter analysis time and the same recovery (>95%) and precision (CV = 1.3-2.7%) in comparison to MDPA method. Results of phosphate determination by both ³¹P NMR methods were tested against the molybdenumvanadate yellow spectrophotometric method (standard PN-ISO 13730, 1999) using standard reference material (certified phosphate solution).     

The unexpected formation of a lithium-enolate from bis2-[(dimethylamino)methyl]phenyl copper lithium. X-ray structure of Li4[OC(CH2)C6H4CH2NMe2-2]4

Attempted crystallization of the bis(aryl)lithium cuprate, Cu₂Li₂(C₆H₄CH₂-NMe₂-2)₄, from diethyl ether/pentane afforded in according to an X-ray diffraction analysis appeared to be the lithium enolate, Li₄[OC(=CH₂)C₆H₄CH₂NMe₂-2]₄. This consists of a central Li₄O₄ cube with intramolecular LiN coordination of the CH₂NMe₂ substituent. This enolate, which has also been prepared via an independent route, is the first example of a structurally characterized lithium enolate and contains Li centres that are intramolecularly coordinated.     

Kinetic and NMR spectroscopic studies of chiral mixed sodium/lithium amides used for the deprotonation of cyclohexene oxide

The mixed-metal complex formed from n-butylsodium, n-butyllithium, and a chiral amino ether has been studied by NMR spectroscopy. Three different mixed-metal amides were used as chiral bases for the deprotonation of cyclohexene oxide. The selectivity and initial rate of reaction were compared for sodium-amido ethers, lithium-amido ethers, and mixtures of sodium and lithiumamido ethers in diethyl ether and tetrahydrofuran, respectively. The mixed sodium/lithium amides are more reactive than the single sodium and lithium amides, whereas the stereoselectivities are higher when lithium amides are used. The alkali-metal/gamma-amido ethers exhibit both higher initial reaction rates and stereoselectivities than their beta-amido ether analogues. NMR spectroscopic studies of mixtures of n-butylsodium (nBuNa), n-butyllithium (nBuLi), and the gamma-amino ethers in diethyl ether show the exclusive formation of dimeric mixed-metal amides. In diethyl ether, the lithium atom of the mixed-metal amide is internally coordinated and the sodium atom is exposed to solvent; however, in tetrahydrofuran, both metals are internally coordinated.     

Structure and thermodynamic aspects of macrobicyclic polyether-metal ion interactions

The crystals structure of a K⁺-diptychand-15C5-18C6 iodide complex has been determined from X-ray data. The complexed bicyclic molecule crystallizes in the triclinic space group witha = 9.995(4) Å,b = 10.097(4) Å,c = 13.725(6) Å, = 90.12(3)°, = 93.62(4)°, = 97.56(3)°. The structure was solved using heavy atom methods and refined toR = 0.032 for 3262 independent reflections. In the crystal structure, the K⁺ lies between the two crown ether rings, and is coordinated by the nine donor atoms of the ligand molecule. The complexation properties of the ligand with K⁺ and Na⁺ were studied by titration calorimetry in 90% (v/v) MeOH/H₂O solution. The studies indicate the formation of 1 : 1 ligand : metal ion complexes in both solid state and solution.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Structural characterization of C-S-H and C-A-S-H samples—Part II: Local environment investigated by spectroscopic analyses

Spectroscopic studies (¹H, ²³Na and ²⁷Al MAS NMR and Raman spectroscopy) have been used to characterize three series of C-S-H samples (0.8<Ca/Si<1.7): one C-S-H series, one aluminum inserted C-S-H series (named C-A-S-H series), and one sodium and aluminum inserted C-S-H series (named C-N-A-S-H series). Previous Rietveld analyses have been performed on the two first series and have clearly shown that (1) a unique ‘tobermorite M defect’ structural model allows to describe the C-S-H structure whatever the Ca/Si ratio and (2) the insertion of aluminum into the C-S-H structure led to the degradation of the crystallinity and to a systematic increase of the basal spacing of about 2 Å regardless the Ca/(Si+Al) ratio (at a constant Al/Si ratio of 0.1). Spectroscopic investigations indicate that the main part of the Al atoms is readily incorporated into the interlayer region of the C-S-H structure. Al atoms are mainly inserted as four-fold coordinated aluminates in the dreierketten silicate chain (either in bridging or paired tetrahedra) at low Ca/Si ratio. Four-fold aluminates are progressively replaced by six-fold coordinated aluminates located into the interlayer region of the C-S-H structure and bonded to silicate chains. Investigation of the hydrogen bonding in C-S-H indicates that the main part of the hydrogen bonds is intra-main layer, and thus explains the low stacking cohesion of the C-S-H structure leading to its nanometric crystal size and the OD character of the tobermorite like structures.     

Tin(IV) Tetrachloride Complexes with Bis-(Dialkylamino)phosphoryl Fluoride: A Multinuclear (119Sn, 31P, 19F,and 1H) NMR Characterization in Solution

The two octahedral complexes SnCl₄·2(O)PF(NR₂)₂ (R = Me or Et) were prepared from reaction of SnCl₄ with the ligand (R₂N)₂P(O)F in anhydrous CHCl₃. The new adducts have been characterized by elemental analysis, IR, and multinuclear (¹¹⁹Sn, ³¹P, ¹⁹F, and ¹H) NMR spectroscopy. The NMR data show that the adducts exist in solution as a mixture of cis and trans isomers with markedly different proportions. When compared with previously described hexamethylphosphoramide (HMPA) and trimethylphosphate (TMPA) analogues, our results indicate that the cis isomer is the predominant species in solution. Low temperature ³¹P and ¹¹⁹Sn NMR spectra show that the compounds partially dissociate in dichloromethane.     

Beryllium(II) Complexes with Bis(dimethylamino)phosphorylfluoride: A Multinuclear NMR (31P, 19F,and 9Be) Characterization in Solution

Complexes of beryllium chloride and nitrate with (Me₂N)₂P(O)F were characterized in solution by multinuclear NMR spectroscopy and in some cases by IR spectroscopy and conductimetry. ³¹P and ¹⁹F NMR spectra were informative of changes associated with complex formation revealing resonances consistent with different species in solution and suggest an equilibrium between these species in both beryllium derivatives. These compounds show narrow lines in the solution ⁹Be NMR spectra, indicative of a highly symmetric environment for beryllium. The presence of the different species was more pronounced in beryllium chloride complexes. The results are compared to those reported in the literature for hexamethylphosphoramide (HMPA).     

Rates of reaction between the nitrate radical and some aliphatic ethers

Rate coefficients for the reaction of NO₃ with dimethyl ether, diethyl ether, di-n-propyl ether, and methyl t-butyl ether (MTBE) have been determined. Absolute rates were measured at temperatures between 258 and 373 K using the fast flow-discharge technique. Relative rate experiments were also made at 295 K in a reactor equipped with White optics and using FTIR spectroscopy to follow the reactions. The measured rate coefficients (in units of 10^?15 cm³ molecule^?1 s^?1) at 295 K are: 0.26 ± 0.11, 2.80 ± 0.23, 6.49 ± 0.65, and 0.64 ± 0.06 for dimethyl ether, diethyl ether, di-n-propyl ether, and methyl t-butyl ether, respectively. The corresponding activation energies are 21.0 ± 5.0, 17.2 ± 4.0, 15.5 ± 2.1, and 20.1 ± 1.7 kJ mole^?1. The error limits correspond to the 95%-confidence interval. © 1994 John Wiley & Sons, Inc.     

Stereoselective reactions of a thioester butanediacetal with various electrophiles

The reactions of the lithium enolate of S-ethyl (2R,5R,6R)-5,6-dimethoxy-5,6-dimethyl-[1,4]-dioxane-2-carbothioate were investigated in the presence or absence of hexamethylphosphoramide (HMPA). Fluorination gave a single isomer with a much better yield than for the corresponding methyl ester. Alkylation with alkyl halides strongly depended upon their structure. Without HMPA, only methyl iodide reacted with moderate yield and gave a single isomer. In the presence of HMPA, all of the alkyl halides reacted almost quantitatively (81–98% yield) with moderate stereoselectivity and preferentially gave products with the alkyl chain attached at the equatorial position. The silyl enol ether obtained from the thioester had the opposite geometry to that obtained from the methyl ester, which thus explains the difference in stereoselectivity between these two compounds.     

Regioselective Alkylation of Lithium Enolates Derived from 2-Heptanone

The benzylation and $\text{u}$-butylation of the kinetic enolate mixture derived from 2-heptanone has been studied in DME in the absence and in the presence of lithium ion complexing agents (triglyme, benzo-14-crown-4, DMF (neat), DMF, and HMPA).     

A N NMR study of tautomerism in dimethyl dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate

Dimethyl dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate can exist either in 1,2- or 1,4-dihydro tautomeric forms. The ¹⁵N NMR spectra of dimethyl dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate were measured at the ¹⁵N natural abundance level as well as in ¹⁵N doubly labelled selectively and in ¹⁵N completely labelled compounds (20% ¹⁵N). The J(¹⁵N,¹⁵N) value was determined in ¹⁵N completely labelled compounds (20% ¹⁵N) using 1D ¹⁵N INADEQUATE and was found to be 12.2 ± 0.2 Hz in deuteriochloroform, acetonitrile-d₃, DMSO-d₆ and CD₃OH. Very similar ¹⁵N chemical shifts and ¹J(¹⁵N,¹H) values were also observed in all the solvents. This indicates that compound 1 exists completely in the 1,4-dihydro tautomeric form (i.e., as dimethyl 1,4-dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate) in all the solvents tested.     

Influence of the central metal on the crystal structures and electronic structures of biferrocene trinuclear complexes

Five metal-bridged biferrocene complexes of the Schiff-base ligand (HL = S-benzyl-N-(ferrocenyl-1-methyl-methylidene)dithiocarbazate) have been studied by single crystal X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy. The crystal structures of the complexes show that the central metal ions are tetra-coordinated by two ligands in two modes: the central d⁸ transition metal ions (Ni²⁺, Pd²⁺, and Pt²⁺) are nearly square-planar coordinated and the d¹⁰ transition metal ions (Zn²⁺ and Cd²⁺) are tetrahedrally coordinated. Interestingly, the isomer shifts in ⁵⁷Fe Mössbauer spectroscopy are also of two kinds: d⁸ transition metal ions (0.097-0.247 mm/s) and d¹⁰ transition metal ions (0.416-0.435 mm/s).     

The effect of polyether ligands on the solution structure of [Li]-α-(phenylthio)benzyllithium in tetrahydrofuran: A H,Li-HOESY NMR study

[⁶Li]-α-(phenylthio)benzyllithium 1-⁶Li was studied in THF/[D₈]THF solution (1:1) in the presence of several acyclic and cyclic polyether ligands by ¹H,⁶Li-HOESY, ¹H and ¹³C NMR spectroscopy. The question whether these ligands are bonded to lithium or not is important for physical–organic investigations as well as for studies of the ground state of (stereoselective) reactions of organolithium compounds in the presence of such ligands. Dimethoxyethane is not bonded to lithium under these conditions. The acyclic ethers diglyme and triglyme coordinate only weakly to the organolithium compound and form contact ion pairs (CIPs) at 25°C. At −80°C, CIPs are in equilibrium with separated ion pairs (SIPs). Very stable complexes of 1-⁶Li are obtained with crown ether ligands. Addition of 12-crown-4 and 15-crown-5, respectively, results in the exclusive formation of SIPs at 25°C and −80°C. With 18-crown-6, a CIP–SIP equilibrium is observed at 25°C which is shifted entirely to the SIP side at −80°C. Graphical analyses of the ¹H and ¹³C NMR spectra of the polyether complexes of 1-⁶Li revealed correlations between the chemical shifts of the para phenyl carbon C-5, the para phenyl proton H-5, the benzylic carbon C-1, and the proton–carbon coupling constant J(C-1,H-1) of 1-Li, which are useful probes for the charge distribution within the carbanionic moiety of 1-⁶Li in the respective complexes, and thus for the ion pair character as a function of the polyether complexation of lithium.     

The crystal structure of a valinomycin•2Ca2+ complex and the multi-step solution equilibria in acetonitrile characterised by 1H NMR,UV–Vis,and mass spectrometry

Valinomycin is a well-known potassium-selective ion carrier, but the nature of its direct interaction with calcium ion, another biologically important cation, is also of considerable interest. We have determined the first crystal structure of a valinomycin–calcium complex, which crystallises exclusively as a 1:2 valinomycin:Ca²⁺ complex, [VCa₂(OTf)₂(H₂O)₂]²⁺ in the solid state (V = valinomycin, OTf = triflate). Along with the 1:2 complex, the solution phase 1:1 and 2:1 complexes have been characterised in acetonitrile by ¹H NMR and UV–Vis titration experiments. The molar absorptivity curves and binding equilibrium constants for these complexes have been determined by the global analysis of the UV–Vis titration data using the program SIVVU?.     

苯乙烯三嗪衍生物的合成及在重金属离子识别中的应用

合成了2,4-二(2-噻吩乙烯基)-6-(4'-N,N-二甲氨基苯乙烯基)-1,3,5-均三嗪(2)并鉴定了其结构。在乙腈-水混合介质中,化合物2在355和416nm处呈现双吸收峰,加入Cu²⁺,Hg²⁺ 和Fe³⁺ 后,均在520nm附近形成新的吸收峰。化合物2与Cu²⁺、Hg²⁺ 和Fe³⁺ 均形成1:1型配合物,其结合常数分别为1.9×10⁵L·mol^-1,6.6×10³L·mol^-1,2.7×10³L·mol^-1。对照化合物4与金属离子的光谱响应与化合物2相似,仅吸收峰的位置不同。因此,可认为化合物2和4中三嗪环中的N和噻吩环中的S与Cu²⁺、Hg²⁺ 和Fe³⁺ 共同配位形成了稳定的金属配合物。     

State in solution, structure, and regioselectivity of reactions of the lithium 1-(2-methoxyphenyl)-3,3-diphenylpropyne derivative

According to the spectrophotometric data, the lithium 1-(2-methoxyphenyl)-3,3-diphenylpropyne derivative in diethyl ether exists as contact ion pairs, while in THF, according to the spectrophotometric and¹³C NMR data, solvent-separated ion pairs are predominantly formed. According to the¹³C NMR data, the carbanion in the solventseparated ion pairs has a structure close to the propargylic type. The regioselectivity of reactions of the lithium derivative with ethyl halides in diethyl ether, THF, and hexamethyphosphoramide, with benzyl chloride in the first two solvents, and with methanol in THF were studied. The protonation with methanol proceeds exclusively at the allenylic center (C-1) while the ethylation and especially benzylation proceed predominantly at the propargylic center (C-3). The selectivity of ethylation of the propargylic center of both solvent-separated ion pairs in THF and contact ion pairs in diethyl ether increases as the hardness of the ethylating agent increases, and in the case of the same ethyl halide, the selectivity increases from the solvent-separated ion pairs to the contact ion pairs. The spectral data obtained and the data on changes in the regioselectivity do not allow one to believe that the contact ion pairs of the lithium derivative in ether exhibit the intramolecular coordination of the lithium cation to the methoxy group, which might lead to the allenylic structure of contact ion pairs of this derivative. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2043–2051, November, 1997.     

Synthesis, NMR characterization and ion binding properties of 1,3-bridged p-tert-butyldihomooxacalix[4]crown-6 bearing pyridyl pendant groups

1,3-Di(2-pyridylmethoxy)-p-tert-butyldihomooxacalix[4]arene-crown-6 (2) was synthesized for the first time. 2 was isolated in a cone conformation in solution at room temperature, as established by NMR spectroscopy (¹H, ¹³C and NOESY). Complete assignment of both proton and carbon NMR spectra was achieved by a combination of COSY, HSQC and HMBC experiments. The binding properties of ligand 2 towards alkali, alkaline earth, transition and heavy metal cations have been assessed by phase transfer and proton NMR titration experiments. The results are compared to those obtained with other dihomooxacalix[4]arene-crowns-6 and closely-related calix[4]arene-crown derivatives. 2 shows a preference for the soft heavy metal cations (except for Cd²⁺), with a very strong affinity for Ag⁺. Some transition metal cations are also well extracted. 2 forms 1:1 complexes with K⁺, Ca²⁺ and Ag⁺, and ¹H NMR titrations indicate that they should be encapsulated into the cavity defined by the crown ether unit and by the two pyridyl pendant arms. A 1:2 (ML₂) complex is formed with Zn²⁺ and two species, probably 1:1 and 1:2 complexes, are obtained with Pb²⁺.