Gold(0) catalyzed dehydrogenation of N-heterocycles

Gold nanoclusters are good catalyst precursors for the catalytic dehydrogenation of indolines, tetrahydroquinazolines, and related N-heterocycles. The catalytically active species is presumably Au(0) nanoparticles.     

Oxidation of primary and secondary alcohols catalyzed by a pentamethylcyclopentadienyliridium complex

The oxidation of primary and secondary alcohols is carried out in acetone under mild conditions using catalytic amounts of [Cp*IrCl₂]₂ and K₂CO₃. Primary alcohols are converted into the corresponding aldehydes with high selectivity in good yields. Secondary alcohols are readily oxidized to ketones with smaller amounts of the catalyst.     

Ru/g-al2o3 as reusable catalyst for dehydrogenation of alcohols without hydrogen acceptor

Summary Ru/g-Al₂O₃ catalyzed the dehydrogenation of alcohols to carbonyl compounds without employing hydrogen acceptor. The catalyst was readily recovered from the reaction mixture and could be reused.     

NHC-assisted Ni(II)-catalyzed acceptorless dehydrogenation of amines and secondary alcohols

A novel catalytic system including NiCl₂-NHC ligand precursor has been developed for the preparation of imines from amines and ketones from alcohols. Owing to the acceptorless dehydrogenation pathway for this reaction, the hydrogen gas is liberated as a by-product. The active catalyst is generated in situ by the reaction of nickel (II) chloride, bis (imidazolium) chlorides and potassium tert-butoxide. The products were obtained in good to excellent yields and a wide variety of amines and ketones were applied successfully in this protocol.     

Aerobic oxidative dehydrogenation of N-heterocycles catalyzed by cobalt porphyrin

An efficient catalytic procedure has been developed for the aerobic oxidative dehydrogenation of N-heterocycles by cobalt porphyrin in the absence of any additives. The catalytic system could tolerate various 1,2,3,4-tetrahydroquinoline derivatives and some other N-heterocycles. The corresponding N-heteroaromatics could be obtained in 59–86% yields. The mechanism investigation suggested that the aerobic oxidative dehydrogenation might proceed with imine intermediate through radical paths.     

Reduction of ketones with secondary alcohols,catalyzed by triphenylphosphine complexes of ruthenium and rhodium

Russian Chemical Bulletin -     

A robust NNP-type ruthenium (II) complex for alcohols dehydrogenation to esters and pyrroles

A Ru (II) complex bearing pyridyl-based benzimidazole-phosphine tridentate NNP ligand was synthesized and structurally characterized by NMR, IR. The complex can efficiently and selectively catalyze the acceptorless dehydrogenation of primary alcohols to esters under relatively mild conditions and the synthesis of pyrroles by means of the reactions of secondary alcohols and β-amino alcohols through acceptorless deoxygenation condensation.     

Iodination of alcohols using triphenylphosphine/iodine under solvent-free conditions using microwave irradiation

A straightforward and effective procedure for the conversion of benzylic, allylic and aliphatic alcohols to the corresponding iodides using Ph₃P/I₂ under solvent-free conditions using microwave irradiation is reported.     

Effect of cerium addition on catalytic performance of PtSnNa/ZSM-5 catalyst for propane dehydrogenation

The effect of cerium addition on the catalytic performance of propane dehydrogenation over PtSnNa/ZSM-5 catalyst has been investigated by reaction tests and some physicochemical characterization such as XRD,BET,TEM,XPS,NH 3-TPD,H 2 chemisorption,TPR and TPO techniques.It has been found that with suitable amount of cerium addition,the platinum dispersion increased,while the carbon deposition tended to be eliminated easily.In these cases,the presence of cerium could not only realize the better distribution of metallic particles on the support,but also strengthen the interactions between Sn species and the support.Additionally,XPS spectra confirmed that more amounts of tin could exist in oxidized form,which was advantageous to the reaction.In our experiments,PtSnNaCe(1.1 wt%)/ZSM-5 catalyst exhibited the best catalytic performance.After running the reaction for 750 h,propane conversion was maintained higher than 30% with the corresponding selectivity to propylene of about 97%.     

Ru/Al2O3-catalyzed transfer dehydrogenation of alcohols

Summary Primary and secondary alcohols were oxidized to their corresponding aldehydes or ketones in good yields using Ru/Al₂O₃ as catalyst in the presence of acetone. The catalyst can be recovered by simple filtration and reused after washing with acetone.     

Direct enantiomer resolution of primary,secondary, and tertiary alcohols by gas chromatography on Chirasil-Val

Summary Many enantiomeric pairs of alcohols (primary, secondary or tertiary) are resolved directly on persilylated glass capillary columns, coated with the chiral stationary phase L- or D-Chirasil-Val. Dependent on the chemical structure of the substrate, considerable resolution factors can be obtained, even with simple aliphatic alcohols. Thus, one strong attraction may be sufficient to produce significant chiral recognition. Enantiomeric purities of these alcohols can be determined with high accuracy and great ease.     

钒氧化物催化CO2氧化异丁烷脱氢的研究

采用溶胶-凝胶法制备了一系列钒氧化物催化剂,并用于CO₂氧化异丁烷脱氢反应. 采用X射线衍射、低温N₂吸附-脱附、O₂程序升温氧化、程序升温表面反应和原位傅里叶变换红外光谱等方法研究了催化剂的性质. 反应结果表明,尽管所有钒氧化物催化剂的丁烯选择性都大于85%,但随着催化剂组成和制备方法的改变,催化活性和稳定性差异显著. 其中,12 wt% V₂O₅/Ce_0.6Zr_0.4O₂（7 wt%）-Al₂O₃的催化活性最高,而6 wt% V₂O₅-Ce_0.6Zr_0.4O₂（7 wt%）-Al₂O₃的稳定性最佳. 关联分析催化反应结果与催化剂表征表明,钒氧化物的催化活性取决于VO_x物种的结晶度和分散度,而催化剂表面所积重质焦炭的特性是决定催化剂稳定性的关键. 非稳态反应和原位光谱结果确认,CO₂氧化异丁烷脱氢遵循Mars-van Krevelen氧化还原机理.     

Kinetic study of propane dehydrogenation and catalyst deactivation over Pt-Sn/Al2O3 catalyst

The kinetics of propane dehydrogenation and catalyst deactivation over Pt-Sn/Al₂O₃ catalyst were studied. Performance test runs were carried out in a fixed-bed integral reactor. Using a power-law rate expression for the surface reaction kinetics and independent law for deactivation kinetics, the experimental data were analyzed both by integral and a novel differential method of analysis and the results were compared. To avoid fluctuation of time-derivatives of conversion required for differential analysis, the conversion-time data were first fitted with appropriate functions. While the time-zero and rate constant of reaction were largely insensitive to the function employed, the rate constant of deactivation was much more sensitive to the function form. The advantage of the proposed differential method, however, is that the integration of the rate expression is not necessary which otherwise could be complicated or impossible. It was also found that the reaction is not limited by external and internal mass transfer limitations, implying that the employed kinetics could be considered as intrinsic ones.     

Design and synthesis of the honeycomb PtSnNa/ZSM-5 monolithic catalyst for propane dehydrogenation

A novel PtSnNa/ZSM-5 monolithic catalyst was designed and synthesized for the propane dehydrogenation reaction, which was a significant transformation in industry. Experimental results showed that although the propane conversion and the propylene selectivity gradually fell down along with the reaction time, the descent speed of the PtSnNa/ZSM-5 monolithic catalyst was slower than that of the granule catalyst and the propane conversion and propylene selectivity of the reaction with monolithic catalyst still remained at a high level after 12 hr. The monolithic catalyst had regular pore structure that facilitated the separation of the product from the catalyst and reduced the limitation on internal and external diffusion and mass transfer, and led to the high catalytic activity and stability. The catalyst could be easily fabricated and was of highly industrial application potential.     

Oxidation of alcohols with hydrogen peroxide catalyzed by soluble iron and osmium derivatives

Summary Osmium chloride OsCl₃ efficiently catalyzes (yields of products up to 90%, turnover numbers (TON) up to 1500) the oxidation of 2-cyanoethanol with hydrogen peroxide to produce the corresponding aldehyde and acid. Oxidation of isopropanol over OsCl₃ gave acetone in 58% yield. The reactions were carried out either in acetonitrile or without any solvent. The analogous iron compound FeCl₃ was found to be less efficient in the oxidation of 2-cyanoethanol (yields of products up to 67%, TON up to 135). Oxidation of isopropanol in this case gave acetone (yield 53%) and acetic acid (yield 11%). Some other soluble derivatives of iron or osmium exhibited noticeably lower catalytic activity in the alcohol oxidation with H₂O₂.     

Clean and selective oxidation of alcohols catalyzed by ion-supported TEMPO in water

Three different types of ion-supported TEMPO catalysts are synthesized and their catalytic activity in the chemoselective oxidation of alcohols is investigated. These new catalysts show high catalytic activity in water and can be reused for the next run by extraction of products. Recycling experiments exhibit that ion-supported TEMPO can be reused up to five times without loss of catalytic activity. This system offers a very clean, convenient, environmentally benign method for the selective oxidation of alcohols.     

Oxidative dehydrogenation of propane over Mo/g-Al2O3. effect of precursor

Alumina supported molybdenum oxide was prepared using ammonium heptamolybdate and molybdenum acetate as different precursors. The catalysts were characterized by BET, AAS, SEM-EDAX, XRD, TPR and surface acidity measurements. The characterization results and the catalytic behavior in oxydehydrogenation of propane were similar irrespective of precursor. This revised version was published online in August 2006 with corrections to the Cover Date.     

Nanocrystalline TiO_2 as an efficient and reusable catalyst for the chemoselective trimethylsilylation of primary and secondary alcohols and phenols

Nanocrystalline TiO₂ was used as an efficient and recyclable catalyst for the chemoselective trimethylsilylation of primary and less hindered secondary alcohols and phenols with hexamethyldisilazane（HMDS）.All reactions were performed under mild and completely heterogeneous conditions in good to excellent yields.     

Silica-supported PtSn alloy doped with Ga, In or, Tl: Characterization and catalytic behaviour in n-hexane dehydrogenation

Silica-supported trimetallic catalysts containing Pt, Sn and a group 13 metal (PtSnM, M=Ga, In, Tl) were prepared by consecutive impregnation steps from cis-[PtCl₂(PPh₃)₂] and chloride precursors. X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (ED) and energy dispersive X-ray analysis (EDX) showed large platelet-like particles of PtSn_1−xM_x phases. PtSnGa catalyst with a Pt/(Sn+Ga) molar ratio of 1.72 showed a bimodal particle distribution and a Pt phase was identified. Differences in surface structures were also revealed by the performance of catalysts in the dehydrogenation of n-hexane. For PtSnIn and PtSnTl (Pt/(Sn+M) molar ratio of about 1) the dehydrogenation was favoured. In contrast, PtSnGa catalyst yielded hydrogenolysis products. Photoelectron spectra showed the Pt 4f_7/2 level at a binding energy of 70.0–71.8 eV in all cases. Moreover, the FT-IR spectra of chemisorbed CO on the PtSnGa showed a slight shift in the ν(CO) toward higher values with respect to the monometallic catalyst, pointing to an electronic effect in accordance with photoelectron spectroscopy.