Three-way-output response system by electric potential: UV-vis, CD, and fluorescence spectral changes upon electrolysis of the chiral ester of tetracyanoanthraquinodimethane

The newly prepared tetracyanoanthraquinodimethane (TCNAQ) derivatives 1a,b with a chiral auxiliary are good electron acceptors and exhibit weak circular dichroism (CD) based on the absorption of TCNAQ. The twin-type electron acceptor 1c with two TCNAQ units shows larger ellipticity by exciton coupling. UV-vis, CD, and fluorescence spectra were changed drastically upon electrochemical reduction of 1c, which demonstrates the unprecedented three-way-output response system.     

Trialkyltetrathiafulvalene-sigma-tetracyanoanthraquinodimethane [R(3)TTF-sigma-TCNAQ] diads: synthesis, intramolecular charge-transfer properties, and X-ray crystal structure.

We report the use of the electron-donating 4,5-dipentyl-4'-methyl-TTF (TTF = tetrathiafulvalene) moiety in combination with the electron acceptor 11,11,12,12-tetracyanoanthraquinodimethane (TCNAQ) unit in the novel D-sigma-A diad molecules 11, 17, and 18. These compounds display a weak, broad, low-energy intramolecular charge-transfer (ICT) band in the UV-vis spectra (lambda(max) 430-450 nm). Cyclic voltammetric studies show two reversible one-electron oxidation processes for the R(3)TTF moiety, and a reversible two-electron reduction process for the TCNAQ moiety. The electron affinity of TCNAQ is significantly enhanced by the electron-withdrawing sulfonamide and sulfonic ester groups (compounds 17 and 18, respectively). Simultaneous electrochemistry and EPR (SEEPR) experiments show no significant intramolecular interaction between the R(3)TTF and TCNAQ moieties in compounds 11 and 18. X-ray crystallographic data are presented for 5, 11, and 20. The structure of 5 reveals hydrogen-bonded dimers. In molecule 11 the bond lengths and conformations of both donor and acceptor moieties are typical for neutral species. Compound 20 is an unusual calcium complex of TCNAQ derivative obtained by dicyanomethylation of anthraquinone-2-carboxylic acid.     

[1,2,5]thiadiazolo[3,4‐g]quinoxaline acceptor‐based donor–acceptor–donor‐type polymers: Effect of strength and size of donors on the band gap

Electrochromic polymers based on [1,2,5]thiadiazolo[3,4‐g]quinoxaline acceptor and thiophene, 3,4‐ethylenedioxythiophene and 3,3‐didecyl‐3,4‐proylenedioxythiophene donors, namely poly(6,7‐diphenyl‐4,9‐di(thiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P1 ), poly(4‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)‐9‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐7‐yl)‐6,7‐diphenyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P2 ), and poly(4‐(3,3‐didecyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin‐6‐yl)‐9‐(3,3‐didecyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin‐8‐yl)‐6,7‐diphenyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P3 ), respectively, were electrochemically and/or chemically synthesized and characterized. Electrochemical and optical properties of the polymers were then investigated. The results, which were obtained electrochemically and optically, indicate that the polymers bearing the same acceptor and different donor units have a band gap range of 0.59–1.24 eV depending on the strength and size of the donor units and band gap determination method. A significant finding in this study was the phenomenon that when the acceptor is physically huge, the general rule that a weak donor would have a high band gap whereas a strong donor would have low band gap can be broken due to the torsional angles/steric hindrances involved with physically large donor molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3483–3493     

Tuning the Spectroscopic,Electrochemical, and Photovoltaic Properties of Triaryl Amine Based Sensitizers through Ring‐Fused Thiophene Bridges

The ring‐fused thiophene derivatives benzo[c]thiophene and its precursor bicyclo[2.2.2]octadiene (BCOD) have been introduced as π‐conjugated spacers for organic push–pull sensitizers with dihexyloxy‐substituted triphenylamine as donor and cyanoacrylic acid as acceptor ( OL1 , OL2 , OL3 , OL4 , OL5 , OL6 ). The effects of the fused ring on the spectroscopic and electrochemical properties of these sensitizers and their photovoltaic performance in dye‐sensitized solar cells have been evaluated. Introduction of a binary benzo[c]thiophene and ethylenedioxy thiophene as π bridge caused a significant red shift of the characteristic intramolecular charge‐transfer band to 642 nm. It is found that the sensitizer OL3 , which contains one benzo[c]thiophene unit as π linker, gives the highest overall conversion efficiency of 5.03 % among all these dyes.     

V形咔唑衍生物的合成及荧光性质

以N-烷基咔唑作为电子给体和共轭桥中心, 二米基硼作为端基电子受体, 合成了两个V形A-π-D-π-A型新化合物: 3,6-二{[(E)-2-(5-二米基硼)噻吩]乙烯基}-N-丁基-咔唑 {N-butyl-3,6-bis{(E)-2-[5-(dimesitylboryl)thiophen-2-yl]-vinyl}-carbazole, BBTC}和3,6-二[(E)-(4-二米基硼)苯乙烯基]-N-己基-咔唑, {N-hexyl-3,6-bis[(E)-4-(dimesitylboryl)-styryl]-carbazole, BBSC}. 这两个化合物在蓝绿光波段都有较强的荧光发射. 光谱数据表明, 扩大共轭体系并在端基引入含硼基团导致吸收谱和发射谱显著红移, 并增大分子内电荷转移.     

Exquisite 1D Assemblies Arising from Rationally Designed Asymmetric Donor–Acceptor Architectures Exhibiting Aggregation‐Induced Emission as a Function of Auxiliary Acceptor Strength

One‐dimensional nanostructures with aggregation‐induced emission (AIE) properties have been fabricated to keep the pace with growing demand from optoelectronics applications. The compounds 2‐[4‐(4‐methylpiperazin‐1‐yl)benzylidene]malononitrile ( PM1 ), 2‐{4‐[4‐(pyridin‐2‐yl)piperazin‐1‐yl]‐benzylidene}malononitrile ( PM2 ), and 2‐{4‐[4‐(pyrimidin‐2‐yl)piperazin‐1‐yl]benzylidene}malononitrile ( PM3 ) have been designed and synthesized by melding piperazine and dicyanovinylene to investigate AIE in an asymmetric donor–acceptor (D–A) construct of A′–D–π–A‐ topology. The synthetic route has been simplified by using phenylpiperazine as a weak donor (D), dicyanovinylene as an acceptor (A), and pyridyl/pyrimidyl groups ( PM2/PM3 ) as auxiliary acceptors (A′). It has been established that A′ plays a vital role in triggering AIE in these compounds because the same D–A construct led to aggregation‐caused quenching upon replacing A′ with an electron‐donating ethyl group ( PM1 ). Moreover, the effect of restricted intramolecular rotation and twisted intramolecular charge transfer on the mechanism of AIE has also been investigated. Furthermore, it has been clearly shown that the optical disparities of these A′–D–π–A architectures are a direct consequence of comparative A′ strength. Single‐crystal X‐ray analyses provided justification for role of intermolecular interactions in aggregate morphology. Electrochemical and theoretical studies affirmed the effect of the A′ strength on the overall properties of the A′–D–π–A system.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.     

Photoinduced Processes of Supramolecular Nanoarrays Composed of Porphyrin and Benzo[ghi]perylenetriimide Units through Triple Hydrogen Bonds with One‐Dimensional Columnar Phases

One‐dimensional supramolecular columnar phases composed of porphyrins (electron donor: D) and benzo[ghi]perylenetriimides (electron acceptor: A) through triple hydrogen bonds have been successfully constructed to perform sequential light‐harvesting and electron‐transfer processes. A series of benzo[ghi]peryleneimide derivatives have been synthesized to examine the substituent effects such as imide and nitrile groups on the spectroscopic and electrochemical properties. Then, formation of the 1:1 supramolecular complex between zinc porphyrin and benzo[ghi]perylenetriimide derivatives through triple hydrogen bonds was confirmed by Job's plot of ¹H NMR titration. Next, the one‐dimensional supramolecular nanoarrays were successfully prepared in a mixed solvent. X‐ray diffraction (XRD) measurement suggested that these nanoarrays contained one‐dimensional columnar phases composed of stacked donor and acceptor layers. Finally, femtosecond transient absorption and electron spin resonance (ESR) measurements clearly indicated that photoinduced electron transfer occurred via the singlet excited states in the supramolecular columns.     

A New Type of Donor–Acceptor Cyclopropane Reactivity: The Generation of Formal 1,2‐ and 1,4‐Dipoles

A new type of donor–acceptor cyclopropane reactivity has been discovered. On treatment with anhydrous GaCl₃, they react as sources of even‐numbered 1,2‐ and 1,4‐dipoles instead of the classical odd‐numbered 1,3‐dipoles due to migration of positive charge from the benzyl center. This type of reactivity has been demonstrated for new reactions, namely, cyclodimerizations of donor–acceptor cyclopropanes that occur as [2+2]‐, [3+2]‐, [4+2]‐, [5+2]‐, [4+3]‐, and [5+4]‐annulations. The [4+2]‐annulation of 2‐arylcyclopropane‐1,1‐dicarboxylates to give polysubstituted 2‐aryltetralins has been developed in a preparative version that provides exceedingly high regio‐ and diastereoselectivity and high yields. The strategy for selective hetero‐combination of donor–acceptor cyclopropanes was also been developed. The mechanisms of the discovered reactions involving the formation of a comparatively stable 1,2‐ylide intermediate have been studied.     

Effect of side chain length on the morphology of blends of 2,5‐bis(3‐alkylthiophen‐2‐yl)thieno[3,2‐b]thiophene oligomers and fullerene derivatives

Using molecular dynamics simulations we study blends of oligomers of 2,5‐bis(3‐alkylthiophen‐2‐yl)thieno[3,2‐b]thiophene, BTTT, and fullerene derivative based acceptors to understand the role of oligomer length and alkyl side chain (SC) length on the morphology of their blends. We use a validated coarse‐grained model of BTTT and fullerene derivatives presented in recent work along with direct comparison of morphology between simulations and experiments. In this article, we predict computationally that short alkyl SCs (6 alkyl groups) decrease the propensity of fullerene derivative acceptors to intercalate between SCs on the BTTT backbone compared to longer alkyl SCs (9 or 12 alkyl groups), and as a result increase acceptor aggregation. The decreasing acceptor intercalation and increasing acceptor aggregation do not significantly impact the positional or orientational order of the BTTT backbones. However, the BTTT oligomer backbones order better with increasing SC length in both neat systems and in blends, with the blends exhibiting higher positional order than neat systems. While these qualitative trends are similar both in 2mer blends and 4mer blends, we see a larger extent of acceptor intercalation and as a result, smaller acceptor cluster sizes in the 4mer blends. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 89–97     

An Efficient Synthesis and Antibacterial Activity of Pyrido[2,3‐d]Pyrimidine,Chromeno[3,4‐c]Pyridine,Pyridine, Pyrimido[2,3‐c]Pyridazine,Enediamines, and Pyridazine Derivatives

A series of Pyrido[2,3‐d]pyrimidine have been synthesized through a reaction of cyanoacetylurea derivatives with aromatic aldehydes or Arylidines. Reaction of compound 1 with aromatic arylidine derivatives or arylhydrazones gave Chromeno[3,4‐c]pyridine, Pyridine, Pyrimido[2,3‐c]pyridazine, Enediamines, and Pyridazine derivatives. All the synthesized compounds were confirmed by spectral studies and screened for their in antibacterial activity against Staphylococcus aureus (Gram positive) and Escherichia coli (Gram negative) bacterial strains. All the compounds were weak to good active against the tested bacterial strains on comparing with the standard drug gentamicin.     

Polymerizable C70 derivatives with acrylate functionality for efficient and stable solar cells

Fullerene-based organic solar cells are generally suffering from severe microstructure evolution occurring in their bulk heterojunction active layers and thus are extremely stable. To address it, four polymerizable C₇₀ fullerene derivatives, [6,6]-phenyl-C₇₁-ethyl acrylate (PC₇₁EA), [6,6]-phenyl-C₇₁-propyl acrylate (PC₇₁PrA), [6,6]-phenyl-C₇₁-butyl acrylate (PC₇₁BA), and [6,6]-phenyl-C₇₁-pentyl acrylate (PC₇₁PeA), have been designed, synthesized, and investigated. These fullerene compounds have a molecular structure, shape and size very like the conventional C₇₀ fullerene acceptor, [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM), and have been found no different in their light absorption, redox potentials, and frontier orbital energy levels. Using these fullerene acrylates individually as acceptor and poly(3-hexylthiophene) as donor, organic solar cells have been fabricated and gave optimal efficiencies ranging from 3.32% to 4.16%, comparable to PC₇₁BM-based reference cells (4.06%). Owing to their acrylate functionality, these fullerene derivatives can turn into insoluble upon heating, and thus endow their solar cell devices much better thermostability than PC₇₁BM-based reference cells. The best one, coming from PC₇₁PeA devices, reported an optimal efficiency of 4.16%, and maintained 91.7% efficiency after heat treatment at 150 °C for 35 h. As a sharp contrast, the PC₇₁BM reference cell dropped its optimal efficiency from 4.06% to 0.48% only after 5 h heat treatment. X-ray diffraction, optical and atomic force microscopy, and space-charge-limited current method have been carried out to understand active layer structure, morphology, and charge mobility change during heat treatment.     

Synthesis and Reactivity of 3‐oxoprop‐1‐en‐1‐olate Derivative as a Building Block for the Synthesis of Azole and Azine Derivatives

Several new heterocyclic compounds such as 7‐substituted pyrazolo[1,5‐a ]pyrimidine ( 5a–e ) derivatives have been synthesized by the reactions of the versatile unreported sodium 3‐(4‐methyl‐2‐(4‐methylphenylsulfonamido)thiazol‐5‐yl)‐3‐oxoprop‐1‐en‐1‐olate (2) with amino heterocyclic ( 3a–e ) derivatives. Reaction of (2) with hydrazonyl halide ( 7a–d ) and hydroximoyl chloride ( 11a,b ) derivatives followed by reaction with hydrazine hydrate afforded pyrazolo[3,4‐d ]pyridazine and isoxazolo[3,4‐d ]pyridazine derivatives, respectively incorporating a thiazole moiety have been described. All newly synthesized compounds were elucidated by considering the data of both elemental and spectral analysis.     

Synthesis and characterization of isoindigo‐based polymers using CH‐arylation polycondensation reactions for organic photovoltaics

A series of three new low bandgap donor–acceptor–donor–acceptor^/ (D–A–D–A^/) polymers have been successfully synthesized based on the combination of isoindigo as the electron‐deficient acceptor and 3,4‐ethylenedioxythiophene as the electron‐rich donor, followed by CH‐arylation with different acceptors (4,7‐dibromo[c][1,2,5]‐(oxa, thia, and/or selena)diazole ( 4a‐c )). These polymers were used as donor materials for photovoltaic applications. All of the polymers are highly stable and show good solubility in chlorinated solvents. The highest power conversion efficiency of 1.6% was achieved in the bulk heterojunction photovoltaic device that consisted of poly ((E)?6‐(7‐(benzo‐[c][1,2,5]‐thiadiazol‐4‐yl)?2,3‐dihydrothieno‐[3,4‐b][1,4]dioxin‐5‐yl)?6′‐(2,3‐dihydrothieno‐[3,4‐b][1,4]‐dioxin‐5‐yl)?1,1′‐bis‐(2‐octyldodecyl)‐[3,3′‐biindolinylidene]‐2,2′‐dione) as the donor and PC₆₁BM as the acceptor, with a short‐circuit current density (J_sc) of 8.10 mA/cm², an open circuit voltage (V_oc) of 0.56 V and a fill factor of 35%, which indicates that these polymers are promising donors for polymer solar cell applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2926–2933     

On the chemistry of 5‐aryl‐2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one

Several pyrido[2,3‐e]pyrimidine fused with other rings have been prepared by intramolecular cyclization of 5‐(4‐chlorophenyl)‐2‐hydrazino‐benzo [6,7]cyclohepta‐[1,2‐b]pyrido[2,3‐e]pyrimidine‐4‐one ( 1 ) with acids, carbon disulfide to form triazole derivatives ( 2,4 ), halo‐ketones to give triazine derivative ( 5 ), β‐ketoesters, β‐cyanoesters, and β‐diketones to yield 2‐(1‐pyrazolyl) derivatives ( 7,9,10 ), and aldehydes to form arylhydrazone derivatives ( 11a,b ) which cyclized to form triazoles ( 12a,b ). Also, acyclic N‐nucleosides are prepared by heating under reflux 2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one ( 1 ) with xylose and glucose to give the corresponding acyclic N‐nucleosides ( 13a,b ) which are cyclized to afford the corresponding protected tetra and penta–O‐acetate C‐nucleosides ( 14a,b ). Deacetylating of the latter nucleosides afforded the free acyclic C‐nucleosides ( 15a,b ). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:34–43, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20248     

Regiocontrolled syntheses of some new spiro[polycyclic-1′-isothiochroman]-4′-one derivatives

Indan-1-one (1a), 1-tetralone (1b), fluorenone (1c), and anthrone (1d) reacted with mercaptoacetic acid in toluene in the presence of p-toluenesulfonic acid to give spiro[indan-1,2′-[1′,3′]oxathialan]-5′-one (2a), spiro[tetrahydro-naphthalene-1,2′-[1,3′]oxathialan]-5′-one (2b), spiro[fluorene9,2′-[1′,3′]-oxathialan]-5′-one (2c), and spiro[anthracene-9(10H)-2′-[1′,3′]-oxathialan]-5′-one (2d), respectively. Compounds 2a–d reacted with arenes in the presence of aluminum chloride to yield spiro[polycyclic-1′-isothiochroman]-4′-one derivatives 3a–t. The mechanisms of these reactions are discussed. All the synthesized spiroheterocycle derivatives were identified by conventional methods (IR, ¹H-NMR spectroscopy) and elemental analyses. © 1996 John Wiley & Sons, Inc.     

A Novel Procedure to Synthesize 3‐Chloro‐1‐(4a,10b‐diazaphenanthrene‐2‐yl)‐4‐phenyl Azetidin‐2‐ones and Exploration of Their Anti‐Inflammatory Activity

Some new derivatives of 3‐chloro‐1‐(4a,10b‐diazaphenanthrene‐2‐yl)‐4‐phenyl azetidin‐2‐one were synthesized through the reaction of N‐{4‐[phenyldiazenyl] phenyl}‐N‐[phenyl methylene] amine with 4‐[phenyldiazenyl] aniline. The resulting 3‐chloro‐4‐phenyl‐1‐{4‐[phenyldiazenyl] phenyl} azetidin‐2‐one intermediate in benzene was irradiated in a Pyrex vessel with 350 nm UV light in a photochemical reactor to give the desired derivatives (4a–j) . Structures of the new compounds were verified on the basis of spectral and elemental methods of analyses. Nine of the prepared compounds were tested for their anti‐inflammatory effects; most of these compounds showed potent and significant results compared with indomethacin.     

Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002     

Synthesis of substituted pyrimido[4,5‐b] and [5,4‐c]‐[1,8]naphthyridines

Ethyl 1‐ethyl‐7‐methyl‐4‐oxo‐1,4‐dihydro[1,8]naphthyridine‐3‐carboxylate ( 1 ), precursor of nalidixic acid, has been converted in two steps through ([1,8]naphthyridin‐3‐yl)carbonylguanidine derivatives into substituted pyrimido[4,5‐b] and [5,4‐c][1,8]naphthyridines.     

Synthesis of new 5‐substitutedbenzo[b]thiophene derivatives

Previous works of our group have dealt with the synthesis of 1‐(aryl)‐3‐[4‐(aryl)piperazin‐1‐yl]propane derivatives in the search for new and efficient antidepressants with a dual mode of action: serotonin reuptake inhibition and 5‐HT_1A receptor afinity [1‐4]. From these studies we concluded that the 3‐[4‐(aryl)piperazin‐1‐yl]‐1‐(benzo[b]thiophen‐3‐yl)propane derivatives led to the best results. The continuation of this research project required the preparation of some new 3‐acyl‐5‐substituted benzo[b]thiophenes with a wide variety of substituents at the 5 position, ranging from nitro to hydroxyl derivatives. To obtain these derivatives we acylated the corresponding 5‐substituted benzo[b]thiophenes when it was possible.