Lithiation of 2-(chloroaryl)-2-methyl-1,3-dioxolanes and application in synthesis of new ortho-functionalized acetophenone derivatives

2-(4-Chlorophenyl)-2-methyl-1,3-dioxolane 2a was lithiated ortho to the ketal group by treatment with butyllithium in THF at 0°C. Related 2-aryl-2-methyl-1,3-dioxolanes possessing a chlorine substituent at the meta position of the aryl group 2b,c were lithiated with butyllithium in THF at −78°C at the position between the two directing groups. The lithio species thus generated were treated with various electrophiles to give ortho-functionalized acetophenone derivatives.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

Soluble and thermally stable polyamides bearing 1,1′-thiobis(2-naphthoxy) groups

A new-type of sulfide containing diacid (1,1′-thiobis(2-naphthoxy acetic acid)) was synthesized from 2-naphthol in three steps. Reaction of 2-naphthol with sulfur dichloride afforded 1,1′-thiobis(2-naphthol) (TBN). 1,1′-Thiobis(2-naphthoxy acetic ester) (TBNAE) was successfully synthesized by refluxing the TBN with methylcholoroacetate in the presence of potassium carbonate. The related diacid was synthesized by basic solution reduction of TBNAE. The obtained diacid was fully characterized and used to prepare novel thermally stable poly(sulfide ether amide)s via polyphosphorylation reaction with different aromatic diamines. The properties of these new polyamides were investigated and compared with similar polyamides. These polyamides showed inherent viscosities in the range of 0.39-0.87 dL g⁻¹ in N,N-dimethylacetamide (DMAc) at 30 °C and at a concentration of 0.5 g dL⁻¹. All the polyamides were readily soluble in a variety of polar solvents such as DMAc and tetrahydrofuran (THF). These polyamides showed glass transition temperature (T_g) between 241-268 °C. Thermogravimetric analysis measurement revealed the decomposition temperature at 10% weight loss (T₁₀) ranging from 441- 479 °C in argon atmosphere.     

Preparation and characterization of symmetrical bis[4-chloro-2-pyrimidyl] dichalcogenide (S, Se, Te) and unsymmetrical 4-chloro-2-(arylchalcogenyl) pyrimidine: X-ray crystal structure of 4-chloro-2-(phenylselanyl) pyrimidine and 2-(p-tolylselanyl)-4-chloropyrimidine

Synthesis of a novel class of multinucleate pyrimidine chalcogen (S/Se/Te) derivatives has been successfully attempted for the first time by the selective substitution of chlorine at the C-2 position of 2,4-dichloropyrimidine with nucleophilic dichalcogenide anion E₂²⁻ (E = S, Se, Te) to afford bis[4-chloro-2-pyrimidyl] dichalcogenide. The highly electrophilic nature of 2,4-dichloropyrimidine compared to aryl chlorides has been further exploited to prepare a variety of 4-chloro-2-(arylchalcogenyl) pyrimidine compounds by substituting the chlorine exclusively at the C-2 position of 2,4-dichloropyrimidine with a variety of chalcogen bearing aryl anions ArE⁻ (Ar = phenyl, 1-naphthyl, p-tolyl, 4,6-dimethyl-2-pyrimidyl, 2-pyridyl, 4-methyl-2-pyridyl). All the newly prepared symmetrical and unsymmetrical pyrimidyl chalcogen compounds have been thoroughly characterized with the help of various spectroscopic techniques viz., NMR (¹H, ¹³C, ⁷⁷Se), FT-IR and mass spectrometry (in representative cases). The crystal structures of 4-chloro-2-(phenylselanyl) pyrimidine and 2-(p-tolylselanyl)-4-chloropyrimidine have been determined by X-ray crystallography.     

Sulfide and sulfoxide based poly(ether-amide)s: Synthesis and characterization

Two new diacid monomers, 2,2′-sulfide bis(4-methyl phenoxy acetic acid) and 2,2′-sulfoxide bis(4-methyl phenoxy acetic acid) were successfully synthesized by refluxing the 2,2′-sulfide bis(4-methyl phenol) and 2,2′-sulfoxide bis(4-methyl phenol) with chloroacetonitrile in the presence of potassium carbonate, and subsequent basic reduction. Two novel series of poly(sulfide-ether-amide)s and poly(sulfoxide-ether-amide)s with aliphatic units in the main chain were prepared from diacids with various diamines.The polyamides were obtained in quantitative yields and their inherent viscosities were in the range of 0.43-0.89 dl g⁻¹ at a concentration of 0.5 g dl⁻¹ in N,N-dimethylacetamide (DMAc) solvent at 25 °C. They showed good thermal stability. The temperature for 10% weight loss in argon atmosphere was in the range of 350-415 °C. The polymers showed glass transition temperatures between 228 and 261 °C. Almost all of the polyamides were readily soluble in a variety of polar solvents such as N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO).     

Preparation and properties of new ortho-linked polyamide-imides bearing ether, sulfur, and trifluoromethyl linkages

A CF₃-containing diamine, 2,2′-thiobis-[4-methyl(2-trifluoromethyl)4-aminophenoxy) phenyl ether] (DA), was successfully synthesized from 2-2′-sulfide-bis-(4-methyl phenol) and 2-chloro-5-nitrobenzotrifluoride. The sulfur containing diimide-diacid (DIDA) was prepared by condensation reaction of diamine DA and trimellitic anhydride. A series of novel organic-soluble polyamide-imides (PAIs) bearing flexible ether and sulfide links, electron-withdrawing trifluoromethyl groups and ortho-phenylene units were synthesized from DIDA, by direct polycondensation with various aromatic diamines in N-methyl-2-pyrrolidone using triphenyl phosphite and pyridine as a condensing agent in the presence of dehydrating agent (LiCl). The polyamide-imides were obtained in high yields and possessed inherent viscosities in the range of 0.42-0.95 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be easily dissolved in amide-type polar aprotic solvents (e.g., N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide) and even dissolved in less polar solvents (e.g., pyridine and tetrahydrofuran). They showed good thermal stability with glass transition temperatures between 195-245 °C, 10% weight loss temperatures in excess of 485 °C, and char yields more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.57-1.59) and low birefringence (Δ ≈ 0.02) due to the trifluoromethyl pendent groups and thioether bridged ortho-catenated aromatic rings that interrupt chain packing and increase free volume.     

Novel thermally stable and chiral poly(amide-imide)s bearing from N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid: Synthesis and characterization

Novel optically active aromatic poly(amide-imide)s (PAIs) were prepared from newly synthesized N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid (3) via polycondensation with various diamines. The diacid was synthesized by the condensation reaction of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (1) with l-isoleucine (2) in a mixture of acetic acid and pyridine (3:2 v/v). All the polymers were obtained in quantitative yields with inherent viscosities of 0.20-0.43 dL g⁻¹. All the polymers were highly organosoluble in solvents like N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), tetrahydrofuran, γ-butyrolactone, cyclohexanone and chloroform at room temperature or upon heating. These poly(amide-imide)s had glass transition temperatures between 198 and 231 °C, and their 10% weight-loss temperatures were ranging from 368 to 398 °C and 353 to 375 °C under nitrogen and air, respectively. The polyimide films had tensile strengths in the range of 63-88 MPa and tensile moduli in the range of 0.8-1.4 GPa. These poly(amide-imide)s possessed chiral properties and the specific rotations were in the range of −3.10° to −72.92°.     

The degradation of 4,5-dichloro-1,2,3-dithiazolium chloride in wet solvents

4,5-Dichloro-1,2,3-dithiazolium chloride 1 (Appel salt) reacts in wet DCM, THF or MeCN to give elemental sulfur, dithiazole-5-thione 4, dithiazol-5-one 5 and thiazol-5-one 6. Furthermore the reaction of 2-phenylthiazol-5(4H)-one 12 with Appel salt 1 at ca. 20 °C gives 4-(4-chloro-5H-1,2,3-dithiazol-5-ylidene)-2-phenylthiazol-5(4H)-one 13 (26%) while at ca. 82 °C a new product 2,2′-diphenyl-4,4′-bithiazol-ylidene-5,5′-dione 14 (36%) is additionally isolated. Finally, 4,4′-bithiazolylidene-5,5′-dione 14 is prepared directly by treating 2-phenylthiazol-5(4H)-one 12 with N-chlorosuccinimide. All new compounds are fully characterised and rational mechanisms are proposed for the formation of all key compounds.     

Determination of 1,3-dichloro-2-propanol and 3-chloro-1,2-propandiol in soy sauce by headspace derivatization solid-phase microextraction combined with gas chromatography-mass spectrometry

This study proposes a method for identifying 1,3-dichloro-2-propanol and 3-chloro-1,2-propandiol in aqueous matrices by using headspace on-fiber derivatization following solid-phase microextraction combined with gas chromatography-mass spectrometry. The optimized SPME experimental procedures for extracting 1,3-dichloro-2-propanol and 3-chloro-1,2-propandiol in aqueous solutions involved a 85 μm polyacrylate-coated fiber at pH 6, a sodium chloride concentration of 0.36 g mL⁻¹, extraction at 50 °C for 15 min and desorption of analytes at 260 °C for 3 min. Headspace derivatization was conducted in a laboratory-made design with N-methyl-N-(trimethylsilyl)-trifluoroacetamide vapor following solid-phase microextraction by using 3 μL N-methyl-N-(trimethylsilyl)-trifluoroacetamide at an oil bath temperature of 230 °C for 40 s. This method had good repeatability (R.S.D.s ≤ 19%, n = 8) and good linearity (r² ≥ 0.9972) for ultrapure water and soy sauce samples that were spiked with two analytes. Detection limits were obtained at the ng mL⁻¹. The result demonstrated that headspace on-fiber derivatization following solid-phase microextraction was a simple, fast and accurate technique for identifying trace 1,3-dichloro-2-propanol and 3-chloro-1,2-propandiol in soy sauce.     

A facile synthetic method for 2-fluoroindolizines from 1-chloro-2,2,2-trifluoroethane (HCFC-133a) and 1,1,1,2-tetrafluoroethane (HFC-134a)

In the presence of KOH and Et₃N, pyridinium and isoquinolinium N-ylides generated in situ from their bromides react with 1-chloro-2,2,2-trifluoroethane (HCFC-133a, bp 6 °C) or 1,1,1,2-tetrafluoroethane (HFC-134a, bp −27 °C) to give the corresponding 2-fluoroindolizines via 1,3-dipolar [3+2] cycloaddition at 80-100 °C in DMSO at atmospheric pressure in normal glassware.     

Rapid amidic hydrolysis: a competitive reaction pathway under basic conditions for N-(hydroxymethyl)benzamide derivatives bearing electron-donating groups

Studies of N-(hydroxymethyl)benzamide derivatives have concluded that the hydroxide-dependent reaction occurs via a specific-base catalyzed deprotonation of the hydroxyl group followed by rate-determining loss of the benzamidate and generation of the aldehyde. The 3-methyl, 4-methyl, and 4-methoxy-N-(hydroxymethyl)benzamide reaction mechanism deviates at higher [HO⁻] with amidic hydrolysis becoming competitive and having reaction half-lives of ∼17 s, in 1 M KOH, I = 1.0 M (KCl), 25 °C. An intramolecular general-base catalyzed mechanism has been suggested for the amidic hydrolysis reaction.     

Preparation of diarylamines by the addition of 4-(N,N-dimethylamino)phenyllithium to nitroarenes

The addition of 4-(N,N-dimethylamino)phenyllithium to nitroarenes in THF (−78°C) affords the corresponding diarylamines in one-pot and the reaction appears to be general in scope. A ‘nitroso’-based mechanism is proposed for this novel nitroreductive N-arylation reaction.     

Synthesis, characterization and thermal properties of new aromatic quaternary ammonium bromides: precursors for ionic liquids and complexation studies

Series of new aromatic R₂R′₂N⁺Br⁻ (R=benzyl, 4-methylbenzyl, 2-phenylethyl, 3-phenylpropyl; R′=ethyl, methyl, isopropyl) or RR′₂NH⁺Br⁻-type (R=benzyl, R′=isopropyl) quaternary ammonium bromides were prepared by using novel synthetic route in which a formamide (N,N-diethylformamide, N,N-dimethylformamide, N,N-diisopropylformamide) is treated with aralkyl halide in presence of a weak base. The compounds were characterized by ¹H-NMR and ¹³C-NMR spectroscopy and mass spectrometry. Structures of the crystalline compounds were determined by X-ray single crystal diffraction, and in addition the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. Three of the compounds crystallized in monoclinic, two in orthorhombic and one in triclinic crystal system, showing ion pairs, which are interconnected by weak hydrogen bonds and weak π-π interactions between the phenyl rings. Three of the compounds appeared as viscous oil or waxes. Finally, TG/DTA and DSC methods were used to analyze thermal properties of the prepared compounds. The lowest melting points were obtained for diethyldi-(2-phenylethyl)ammonium bromide (122.2 °C) and for diethyldi-(3-phenylpropyl)-ammonium bromide (109.1 °C). In general, decomposition of the compounds started at 170-190 °C without identifiable cleavages, thus liquid ranges of 30-70 °C were observed for some of the compounds.     

Synthesis of novel Y-type polyurethane containing azomethine moiety, as non-linear optical chromophore and their properties

3,4-Di-(2′-hydroxyethoxy)-4′-nitrobenzylidene II was prepared by condensation reaction of 3,4-dihydroxy-4′-nitrobenzylidene I with 1-chloro-2-ethanol. Monomer II was reacted with p-phenylene diisocyanate to yield polyurethane containing the non-linear optical chromophore 3,4-di-(2′-hydroxyethoxy)-4′-nitrobenzylidene. Polymer III shows thermal stability up to 300 °C in TGA thermogram. T_g value of the polymer obtained from DSC thermogram was 110 °C. The resulting polyurethane III was soluble in common organic solvents such as acetone, DMF and DMSO. The values of electro optic coefficient d₃₃ and d₃₁ of the poled polymer film were 3.15 × 10 ⁻⁷ and 1.5 × 10 ⁻⁷ esu, respectively.     

Synthesis and spectral studies on nickel(II) complexes of amide group-containing ligands

Summary Complexes of nickel(II) with N-(2-carboxyphenyl)benzamide (CPBH), 2-amino-N-(2-carboxyphenyl)benzamide (ACPBH), N-isoxazolyl benzamide (IB), N-anilinobenzamide (AB), N-(2-pyridyl)-3-carboxypropanamide (PCPA) and N-(2-pyridyl)-2-carboxybenzamide (PCBA) have been isolated and characterized by elemental analyses, magnetic susceptibility measurements, thermal studies, i.r. and electronic spectral studies. The electrochemical behaviour of some complexes has also been investigated.     

Selective synthesis of 2-substituted pyridine N-oxides via directed ortho-metallation using Grignard reagents

Addition of i-PrMgCl to pyridine N-oxides in THF at −78 °C generates selectively an ortho-metallated species, which can be trapped with various electrophiles to generate 2-substituted pyridine N-oxides. Furthermore, by applying a double metal-catalyzed cross-coupling, direct arylation of the pyridine N-oxides is achieved.     

Enantioselective synthesis of planar chiral azaferrocenes via chiral ligand-mediated ring- and lateral-lithiations

Lithiation of 1′,2′,3′,4′,5′-pentamethylazaferrocene (1) with sec-BuLi/(−)-sparteine (3) in Et₂O at −78°C followed by quenching with electrophiles gave the ring-substituted products 2 in 74-81% ee. On the other hand, lithiation of 1′,2,2′,3′,4′,5,5′-heptamethylazaferrocene (6) with sec-BuLi in the presence of S-valine-derived bis(oxazoline) 5 in Et₂O at −55°C and subsequent reaction with electrophiles afforded the laterally functionalized products 7 in excellent enantioselectivity (96-99% ee).     

A novel class of organosoluble and light-colored fluorinated polyamides derived from 2,2-bis(4-amino-2-trifluoromethylphenoxy)biphenyl or 2,2-bis(4-amino-2-trifluoromethylphenoxy)-1,1-binaphthyl

Two series of novel fluorinated aromatic polyamides were prepared from 2,2^′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (2) and 2,2^′-bis(4-amino-2-trifluoromethylphenoxy)-1,1^′-binaphthyl (4) with various aromatic dicarboxylic acids using the phosphorylation polycondensation technique. The polyamides had inherent viscosities ranging from 0.43 to 0.62 dl/g and 0.36 to 0.74 dl/g, respectively. All the fluorinated polyamides were soluble in many polar organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidinone, and afforded transparent, light-colored, and flexible films upon casting from DMAc solvent. These polyamides showed glass-transition temperatures in the ranges of 190-240 °C (for the 6 series from diamine 2) and 247-255 °C (for the 7 series from diamine 4) by differential scanning calorimetry, softening temperatures in the ranges of 196-230 °C (6 series) and 241-291 °C (7 series) by thermomechanical analysis, and decomposition temperatures for 10% weight loss above 420 °C in both nitrogen and air atmospheres.     

Synthesis and characterization of polyamides containing pendant pentadecyl chains

A new aromatic diacid monomer viz., 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid was synthesized starting from cardanol and was characterized by FTIR, ¹H- and ¹³C NMR spectroscopy. A series of new aromatic polyamides containing ether linkages and pendant pentadecyl chains was prepared by phosphorylation polycondensation of 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid with five commercially available aromatic diamines viz., 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-methylenedianiline, 1,3-phenylenediamine, and 4,4′-(hexafluoroisopropylidene)dianiline. Inherent viscosities of the polyamides were in the range 0.45-0.66 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. The introduction of ether linkages and pendant pentadecyl chains into polyamides led to an enhanced solubility in N,N-dimethylacetamide and 1-methyl-2-pyrrolidinone at room temperature or upon heating. The polyamides could be solution-cast into tough, flexible and transparent films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-Ray diffractograms also displayed a diffuse to sharp reflection in the small-angle region (2θ = ∼2-5°) for the polyamides characteristics of formation of loosely to well-developed layered structure arising from packing of flexible pentadecyl chains. The glass transition temperature observed for the polyamides was in range 139-189 °C. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of the polyamides was in the range 425-453 °C indicating their good thermal stability.     

Cu(N-N)2Cl2 and Cu(N-N-N)Cl2 and HgCl2 building blocks in the synthesis of coordination compounds—X-ray studies and magnetic properties

A series of complexes containing Cu(N-N)₂Cl₂ (N-N=bis(pyrazol-1-yl)methane (bpzm), bis(3,5dimethylpyrazol-1-yl)methane (bdmpzm), 2,2-dipyridylamine (dpa), 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) and 2,2′-bipyridine (bipy)), Cu(N-N-N)Cl₂ (N-N-N=2,2′:6′,2″-terpyridine (terpy)) and HgCl₂ building blocks have been synthesized and structurally characterized. Increase in structural dimensionality is observed for [Cu(bpzm)₂][HgCl₄], [Cu(dpa)₂][HgCl₃]₂ and [Cu(terpy)(μ-Cl)HgCl₃] compounds. No coordination polymers have formed in the case of bis(3,5dimethylpyrazol-1-yl)methane, 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine and 2,2′-bipyridine. The [Cu(bpzm)₂][HgCl₄] and [Cu(terpy)(μ-Cl)HgCl₃] complexes have been studied by magnetic measurements.