Thermal decomposition of hydrogen peroxide in the presence of sulfuric acid

Hydrogen peroxide (H₂O₂) is popularly employed as a reaction reagent in cleaning processes for the chemical industry and semiconductor plants. By using differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2), this study focused on the thermal decomposition reaction of H₂O₂ mixed with sulfuric acid (H₂SO₄) with low (0.1, 0.5 and 1.0 N), and high concentrations of 96 mass%, respectively. Thermokinetic data, such as exothermic onset temperature (T ₀), heat of decomposition (ΔH _d), pressure rise rate (dP/dt), and self-heating rate (dT/dt), were obtained and assessed by the DSC and VSP2 experiments. From the thermal decomposition reaction on various concentrations of H₂SO₄, the experimental data of T ₀, ΔH, dP/dt, and dT/dt were obtained. Comparisons of the reactivity for H₂O₂ and H₂O₂ mixed with H₂SO₄ (lower and higher concentrations) were evaluated to corroborate the decomposition reaction in these systems.     

Etude de la deshydratation de Ca(H2PO4)2·H2O et de sa reaction avec CaSO4 par ATD-ATG couplees

The dehydration of Ca(H₂PO₄)₂·H₂O was examined with simultaneous DTA and TG. This dehydration permitted clearly the apparation of the following phases: Ca(H₂PO₄)₂·0.5H₂O, Ca(H₂PO₄)₂, Ca₃(HP₂O₇)₂, Ca₂HP₃O₁₀ et Ca(PO₃)₂. The reaction of Ca(H₂PO₄)₂·H₂O and CaSO₄ was also examined with the same technics. It was found that the decomposition of CaSO₄ takes place for relatively low temperature (between 600°C and 800°C).     

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

A highly water and thermally stable metal-organic framework (MOF) Zn₂(Pydc)(Ata)₂ (1, H₂Pydc = 3,5-pyridinedicarboxylic acid; HAta = 3-amino-1,2,4-triazole) was synthesized on a large scale using inexpensive commercially available ligands for efficient separation of C₂H₂ from CH₄ and CO₂. Compound 1 could take up 47.2 mL/g of C₂H₂ under ambient conditions but only 33.0 mL/g of CO₂ and 19.1 mL/g of CH₄. The calculated ideal absorbed solution theory (IAST) selectivities for equimolar C₂H₂/CO₂ and C₂H₂/CH₄ were 5.1 and 21.5, respectively, comparable to those many popular MOFs. The Q_st values for C₂H₂, CO₂, and CH₄ at a near-zero loading in 1 were 43.1, 32.1, and 22.5 kJ mol⁻¹, respectively. The practical separation performance for C₂H₂/CO₂ mixtures was further confirmed by column breakthrough experiments.     

Facile one-pot synthesis of 2-arylbenzothiazoles catalyzed by H3PO4/TiO2-ZrO2 (1/1) under solvent-free conditions

A highly efficient and simple protocol for the preparation of 2-arylbenzothiazoles through condensation of 2-aminothiophenol and different aldehydes in the presence of H₃PO₄/TiO₂-ZrO₂(1/1)-cetyl pyridinium bromide (CPB) is described. The reaction proceeded under mild and solvent-free conditions to afford 2-arylbenzothiazole derivatives. In this method, the title compounds were obtained in good to excellent yields and short reaction times. The structures of synthesized products were identified by infrared, ¹H NMR, ¹³C NMR, and mass spectroscopy.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

Silica-gel-supported Ce(SO4)2·4H2O-mediated cyclization of 2′-amino and 2′-hydroxychalcones under solvent-free conditions

A simple, efficient, and environmentally friendly approach for the synthesis of flavones, aza-flavones, and aza-flavanones from corresponding 2′-hydroxy or 2′-aminochalcones has been developed. The reactions are successfully conducted in presence of silica-gel-supported Ce(SO₄)₂·4H₂O under solvent-free conditions.     

Theoretical study on H2 elimination pathways of silylenoid H2SiLiF with CH4, NH3, H2O, HF, SiH4, PH3, H2S, and HCl

Ab initio molecular orbital calculations have been performed to explore the reaction potential energy surfaces of silylenoid H₂SiLiF with XH _n hydrides, where XH _n = CH₄, NH₃, H₂O, HF, SiH₄, PH₃, H₂S, and HCl. We have identified a previously unreported reaction pathway on each reaction surface, H₂SiLiF + H-XH _{n − 1} → H _n XSiLiF + H₂, which involves H₂ elimination following the initial formation of an association complex via a four-membered ring transition state to form the substituted three-membered ring silylenoid H _n XSiLiF and a H₂ molecule. This theoretical calculations suggest that (i) for H₂ eliminations there is a very clear trend toward lower activation barriers and more exothermic interactions on going from left to right along a given row in periodic table, and (ii) for the second-row hydrides, the H₂ elimination reactions are less exothermic than for the first-row hydrides and the reaction barriers are lower for X–S and Cl. Compared to the insertions of H₂SiLiF into XH _n , the H₂ elimination pathways should be unfavorable with higher barrier and lower exothermic.     

Facilitated Transport of C<Subscript>2</Subscript>H<Subscript>4</Subscript> in a SiO<Subscript>2</Subscript>-poly(N-vinylpyrrolidone)-Ag<Superscript>+</Superscript> Inorganic-Organic Hybrid Membrane

Inorganic-organic hybrid membranes containing silica as the structure matrix, poly(N-vinylpyrrolidone) (PVP) as the organic mediating agent and silver ions as olefinic carriers were prepared using sol–gel method and dip-coating process. The structure and permeances of the membranes for N₂, He, C₂H₄, C₂H₆ at different temperatures indicated that defect-free membranes were obtained and the transportation of the C₂H₄ through the membranes followed the dissolution and diffusion mechanism. Ideal separation factors of C₂H₄/C₂H₆ through the membranes were evaluated at the temperature of 298, 373 and 423 K respectively using mixture gas of 50% C₂H₄-50% C₂H₆. The results showed that the ideal separation factors of C₂H₄/C₂H₆ through the membranes were obviously greater than the ratio of PC₂H₄/PC₂H₆ obtained from the single gas measurement due to the hindering effect by the adsorbed C₂H₄. The ideal separation factors of C₂H₄/C₂H₆ increased with temperature and reached 10 at 423 K, which suggested that C₂H₄ and C₂H₆ could be separated at lower humidity compared to the reported organic polymer/silver salt membranes in which humidified gases and higher silver loading were usually used. The transport of C₂H₄ in the inorganic-organic hybrid membrane was proposed to follow the hopping mechanism, that is, olefins moved across the fixed silver sites.     

Crystal structures and luminescence of two cadmium(II) polymers constructed from aromatic polycarboxylate and bis(1,2,4-triazol-1-yl)methane ligands

Two new coordination compounds, {[Cd₂(btrm)(ip)₂(H₂O)₂]?·?2H₂O} _n (1) and {[Cd₂(btrm)(hip)₂(H₂O)₄]?·?3H₂O} _n (2) (btrm?=?bis(1,2,4-triazol-1-yl)methane, H₂ip?=?isophthalic acid, H₂hip?=?5-hydroxy isophthalic acid), have been synthesized and structurally characterized. Compound 1 is a 3-D network with CdSO₄ topology. Compound 2 contains 1-D ladder structures, which are interconnected by classical hydrogen-bonding interactions (O–H?···?O) to lead to 3-D supramolecular architectures. Luminescence was performed on 1 and 2, both of which showed strong fluorescent emissions in the solid state at room temperature.     

Synthesis of high surface area nanometer magnesia by solid-state chemical reaction

Nanometer MgO samples with high surface area, small crystal size and mesoporous texture were synthesized by thermal decomposition of MgC₂O₄ · 2H₂O prepared from solid-state chemical reaction between H₂C₂O₄ · 2H₂O and Mg (CH₃COO)₂ · 4H₂O. Steam produced during the decomposition process accelerated the sintering of MgO, and MgO with surface area as high as 412 m² · g⁻¹ was obtained through calcining its precursor in flowing dry nitrogen at 520°C for 4 h. The samples were characterized by X-ray diffraction, N₂ adsorption, transmission electron microscopy, thermogravimetry, and differential thermal analysis. The as-prepared MgO was composed of nanocrystals with a size of about 4–5 nm and formed a wormhole-like porous structure. The MgO also had good thermal stability, and its surface areas remained at 357 and 153 m²·g⁻¹ after calcination at 600 and 800°C for 2 h, respectively. Compared with the MgO sample prepared by the precipitation method, MgO prepared by solid-state chemical reaction has uniform pore size distribution, surface area, and crystal size. The solid-state chemical method has the advantages of low cost, low pollution, and high yield, therefore it appears to be a promising method in the industrial manufacture of nanometer MgO. Translated from Chinese Journal of Catalysis, 2006, 27(9): 793–798 (in Chinese)     

2-Pivalamido-3H-pyrimidin-4-one derivatives: convenient pivalamide hydrolysis using Fe(NO3)3 in MeOH

A simple methodology for pivalamide (trimethylacetamide, pivaloylamino) hydrolysis has been discovered using Fe(NO₃)₃ in MeOH at room temperature. The pivalamido group of 2-pivalamido-3H-pyrimidin-4-ones or fused 2-pivalamido-3H-pyrimidin-4-ones such as 2-pivalamido-3H-quinazolin-4-ones and 2-pivalamido-3H-pteridines have been hydrolysed under these conditions to afford the corresponding amine.     

DSC study of the phase transitions in [Ni(D2O)6](ClO4)2 and [Ni(H2O)6](ClO4)2

DSC measurements were carried out for [Ni(H₂O)₆](ClO₄)₂ (sampleH) and [Ni(D₂O)₆](ClO₄)₂ (sampleD) in the temperature range 300–380 K. For both compounds two anomalies on the DSC curves were detected. The results for sampleH are compared to those previously obtained using adiabatic calorimetry method. For both compounds studied in this work the high-temperature transition appears at the same temperature while the low-temperature one is shifted towards higher temperatures in sampleD. Disorder connected with H₂O or D₂O groups is suggested in the intermediate phase between the low- and high-temperature transitions.     

Efficient synthesis of mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones using KAl(SO4)2·12H2O as a reusable catalyst in water and ethanol

KAl(SO₄)₂·12H₂O was found to catalyze efficiently a one-pot three-component cyclocondensation of isatoic anhydride and primary amines or ammonia sources such as (NH₄)₂CO₃, NH₄OAc and NH₄Cl with aromatic aldehydes under mild conditions to afford the corresponding mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones in good yields.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

TG/DTA/MS Study of the thermal decomposition of FeSO4·6H2O

The thermal decomposition of FeSO₄·6H₂O was studied by mass spectroscopy coupled with DTA/TG thermal analysis under inert atmosphere. On the ground of TG measurements, the mechanism of decomposition of FeSO₄·6H₂O is: i) three dehydration steps FeSO₄·6H₂O FeSO₄·4H₂O+2H₂O FeSO₄·4H₂O FeSO₄·H₂O+3H₂O FeSO₄·H₂O FeSO4+H₂O ii) two decomposition steps 6FeSO₄ Fe₂(SO₄)₃+2Fe₂O₃+2SO₂ Fe₂(SO₄)3 Fe₂O₃+3SO₂+3/2O₂ The intermediate compound was identified as Fe₂(SO₄)₃ and the final product as the hematite Fe₂O₃.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Transformation of 2,4-dichlorophenol by H2O2/UV-C, Fenton and photo-Fenton processes: Oxidation products and toxicity evolution

In the present study, H₂O₂/UV-C, Fenton and photo-Fenton treatment of 2,4-dichlorophenol was compared in terms of oxidation products and acute toxicity. The oxidation products were identified by gas chromatography-mass spectroscopy, high performance liquid chromatography and ion chromatography, whereas changes in acute toxicity were evaluated by the Vibrio fischeri luminescence inhibition assay. H₂O₂/UV-C and photo-Fenton processes ensured complete 2,4-dichlorophenolremoval, detoxification and significant mineralization. Hydroquinone and formic acid were identified as the common oxidation products of the studied advanced oxidation processes investigated. 3,5-dichloro-2-hydroxybenzaldehyde, phenol, 4-chlorophenol and 2,5-dichlorohydroquinone were identified as the additional H₂O₂/UV-C oxidation products of 2,4-dichlorophenol. Acute toxicity decreased with decreasing 2,4-dichlorophenol and increasing chloride release.     

镥晶体的绝热量热法测试和热力学函数

文章合成了Lu(NO₃)₃(C₂H₅O₂N)_4.H₂O,用红外和元素分析对其进行了表征。用高精度全自动绝热量热仪,测定了该配合物80-382 K温区的热容, 利用实验热容数据, 根据热容与焓、熵的热力学关系, 求出了配合物85-350 K温区内每隔5 K相对于298.15K的标准热力学函数(HT - H298.15)m和(ST - S298.15)m.在80-350 K温度区间内,配合物的热容随温度升高而增大,没有相转移点和热力学吸收峰的出现,该配合物在此温度区间内是稳定存在的。     

Transition metal tetramolybdate dihydrates MMo4O13·2H2O (M=Co,Ni) having a novel pillared layer structure

Hydrothermal synthesis in the M/Mo/O (M=Co,Ni) system was investigated. Novel transition metal tetramolybdate dihydrates MMo₄O₁₃·2H₂O (M=Co,Ni), having an interesting pillared layer structure, were found. The molybdates crystallize in the triclinic system with space group P−1, Z=1 with unit cell parameters of a=5.525(3) Å, b=7.058(4) Å, c=7.551(5) Å, α=90.019(10)°, β=105.230(10)°, γ=90.286(10)° for CoMo₄O₁₃·2H₂O, and a=5.508(2) Å, b=7.017(3) Å, c=7.533(3) Å, α=90.152(6)°, β=105.216(6)°, γ=90.161(6)° for NiMo₄O₁₃·2H₂O The structure is composed of two-dimensional molybdenum-oxide (2D Mo-O) sheets pillared with CoO₆ octahedra. The 2D Mo-O sheet is made up of infinite straight ribbons built up by corner-sharing of four molybdenum octahedra (two MoO₆ and two MoO₅OH₂) sharing edges. These infinite ribbons are similar to the straight ones in triclinic-K₂Mo₄O₁₃ having 1D chain structure, but are linked one after another by corner-sharing to form a 2D sheet structure, like the twisted ribbons in BaMo₄O₁₃·2H₂O (or in orthorhombic-K₂Mo₄O₁₃) are.