Hydrophilic surface modification of cyclic olefin copolymer microfluidic chips using sequential photografting

The plastic material known as cyclic olefin copolymer (COC) is a useful substrate material for fabricating microfluidic devices due to its low cost, ease of fabrication, excellent optical properties, and resistance to many solvents. However, the hydrophobicity of native COC limits its use in bioanalytical applications. To increase surface hydrophilicity and reduce protein adsorption, COC surfaces were photografted with poly(ethylene glycol) methacrylate (PEGMA) using a two-step sequential approach: covalently-bound surface initiators were formed in the first step and graft polymerization of PEGMA was then carried out from these sites in the second step. Contact angle measurements were used to monitor and quantify the changes in surface hydrophilicity as a function of grafting conditions. As water droplet contact angles decreased from 88 degrees for native COC to 45 degrees for PEGMA-grafted surfaces, protein adsorption was also reduced by 78% for the PEGMA-modified COC microchannels as determined by a fluorescence assay. This photografting technique should enable the use of COC microdevices in a variety of bioanalytical applications that require minimal nonspecific adsorption of biomolecules.     

From the Bench to the Field in Low‐Cost Diagnostics: Two Case Studies

Despite the growth of research in universities on point‐of‐care (POC) diagnostics for global health, most devices never leave the laboratory. The processes that move diagnostic technology from the laboratory to the field—the processes intended to evaluate operation and performance under realistic conditions—are more complicated than they might seem. Two case studies illustrate this process: the development of a paper‐based device to measure liver function, and the development of a device to identify sickle cell disease based on aqueous multiphase systems (AMPS) and differences in the densities of normal and sickled cells. Details of developing these devices provide strategies for forming partnerships, prototyping devices, designing studies, and evaluating POC diagnostics. Technical and procedural lessons drawn from these experiences may be useful to those designing diagnostic tests for developing countries, and more generally, technologies for use in resource‐limited environments.     

Nanomaterials and lab-on-a-chip technologies

Lab-on-a-chip (LOC) platforms have become important tools for sample analysis and treatment with interest for DNA, protein and cells studies or diagnostics due to benefits such as the reduced sample volume, low cost, portability and the possibility to build new analytical devices or be integrated into conventional ones. These platforms have advantages of a wide set of nanomaterials (NM) (i.e. nanoparticles, quantum dots, nanowires, graphene etc.) and offer excellent improvement in properties for many applications (i.e. detectors sensitivity enhancement, biolabelling capability along with other in-chip applications related to the specificities of the variety of nanomaterials with optical, electrical and/or mechanical properties). This review covers the last trends in the use of nanomaterials in microfluidic systems and the related advantages in analytical and bioanalytical applications. In addition to the applications of nanomaterials in LOCs, we also discuss the employment of such devices for the production and characterization of nanomaterials. Both framed platforms, NMs based LOCs and LOCs for NMs production and characterization, represent promising alternatives to generate new nanotechnology tools for point-of-care diagnostics, drug delivery and nanotoxicology applications.     

Importance of using highly pure internal standards for successful liquid chromatography/tandem mass spectrometric bioanalytical assays

Internal standards (IS) with similar physicochemical properties to the analyte provide multiple advantages in liquid chromatography/tandem mass spectrometric (LC/MS/MS) bioanalytical methods such as: reduction of the analysis run time, improvement in the intra‐injection reproducibility, impact reduction of matrix and ionization effects. However, it is important to evaluate the purity of the IS prior to their use. Indeed, a minor impurity in the IS may lead to an important issue during bioanalytical method development. Stable labelled internal standards are usually appropriate IS for bioanalysis. The use of oxycodone‐D3, ursodiol‐D5 and atovaquone‐D4 as internal standards in three different bioanalytical methods was evaluated. During oxycodone, oxymorphone and noroxycodone simultaneous quantification method development, oxymorphone was identified as a contaminant in oxycodone‐D3. Since the limit of quantification for oxymorphone was very low (10 pg/mL), the presence of an even low percentage of oxymorphone in oxycodone‐D3 leads to the change of the stable labelled IS for an analogue, ethylmorphine. 23‐Nordeoxycholic acid was preferred to ursodiol‐D5 as internal standard for the ursodiol, tauroursodiol and glycoursodiol simultaneous quantification method. Indeed, more than 7% of ursodiol was identified in the ursodiol‐D5 which could not be bypassed by decreasing the IS concentration without compromising the linearity. An atovaquone‐D4 reference standard revealed the non‐negligible presence of atovaquone‐D5 to atovaquone‐D8 that has a large impact on the method validation. Therefore, atovaquone‐D4 was sent for recertification since its isotopic purity was found to be much less than the isotopic purity mentioned on its certificate of analysis. Consequently, during bioanalytical method development, the purity of the IS should be scrutinized. Copyright © 2009 John Wiley & Sons, Ltd.     

Microfluidics in Inorganic Chemistry

The application of microfluidics in chemistry has gained significant importance in the recent years. Miniaturized chemistry platforms provide controlled fluid transport, rapid chemical reactions, and cost‐saving advantages over conventional reactors. The advantages of microfluidics have been clearly established in the field of analytical and bioanalytical sciences and in the field of organic synthesis. It is less true in the field of inorganic chemistry and materials science; however in inorganic chemistry it has mostly been used for the separation and selective extraction of metal ions. Microfluidics has been used in materials science mainly for the improvement of nanoparticle synthesis, namely metal, metal oxide, and semiconductor nanoparticles. Microfluidic devices can also be used for the formulation of more advanced and sophisticated inorganic materials or hybrids.     

Amphiphilic p‐tert‐Butylcalix[4]arene Scaffolds Containing Exposed Carbohydrate Dendrons

The best of both worlds. Amphiphilic hybrid molecules, in which water‐exposed glycodendrons are attached to a hydrophobic p‐tert‐butylcalix[4]arene scaffold, display strong affinities for both carbohydrate‐binding proteins and polystyrene surfaces (shown schematically). The molecules can form monolayers useful in bioanalytical devices.     

New advances in electrochemical biosensors for the detection of toxins: Nanomaterials,magnetic beads and microfluidics systems. A review

The use of nanotechnology in bioanalytical devices has special advantages in the detection of toxins of interest in food safety and environmental applications. The low levels to be detected and the small size of toxins justify the increasing number of publications dealing with electrochemical biosensors, due to their high sensitivity and design versatility. The incorporation of nanomaterials in their development has been exploited to further increase their sensitivity, providing simple and fast devices, with multiplexed capabilities. This paper gives an overview of the electrochemical biosensors that have incorporated carbon and metal nanomaterials in their configurations for the detection of toxins. Biosensing systems based on magnetic beads or integrated into microfluidics systems have also been considered because of their contribution to the development of compact analytical devices. The roles of these materials, the methods used for their incorporation in the biosensor configurations as well as the advantages they provide to the analyses are summarised.     

Point‐of‐Care Smartphone‐based Electrochemical Biosensing

Point‐of‐care (PoC) biosensors offer promising solutions to today's adverse and costly healthcare issues by moving diagnostic tools closer to the patient. The ubiquity of smartphones has brought about an emergence of PoC devices, which leverage the smartphone's capabilities, enabling the creation of low‐cost and portable biosensors. Electrochemical biosensors are well suited for PoC testing since the transducers can be miniaturized and inexpensively fabricated. This review paper discusses recent developments in smartphone‐based electrochemical biosensors for PoC diagnostics. These peripherals utilize the various connectivity options (for example proprietary ports, audio headphone‐jack, or wireless radio) to offload functionality to the smartphone. The smartphone‐based implementations of various electrochemical techniques, such as amperometry, potentiometry, and impedance spectroscopy are explored. Major challenges include reducing power, area, and cost of measurement circuitry, while maintaining adequate performance for PoC diagnostic applications.     

Isolation of plasma from whole blood using planar microfilters for lab-on-a-chip applications

Researchers are actively developing devices for the microanalysis of complex fluids, such as blood. These devices have the potential to revolutionize biological analysis in a manner parallel to the computer chip by providing very high throughput screening of complex samples and massively parallel bioanalytical capabilities. A necessary step performed in clinical chemistry is the isolation of plasma from whole blood, and effective sample preparation techniques are needed for the development of miniaturized clinical diagnostic devices. This study demonstrates the use of passive, operating entirely on capillary action, transverse-flow microfilter devices for the microfluidic isolation of plasma from whole blood. Using these planar microfilters, blood can be controllably fractionated with minimal cell lysis. A characterization of the device performance reveals that plasma filter flux is dependent upon the wall shear rate of blood in the filtration channel, and this result is consistent with macroscale blood filtration using microporous membranes. Also, an innovative microfluidic layout is demonstrated that extends device operation time via capillary action from seconds to minutes. Efficiency of these microfilters is approximately three times higher than the separation efficiencies predicted for microporous membranes under similar conditions. As such, the application of the microscale blood filtration designs used in this study may have broad implications in the design of lab-on-a-chip devices, as well as the field of separation science.     

Electrochemistry on Paper‐based Analytical Devices: A Review

Even though they were introduced less than a decade ago, electrochemical paper‐based devices (ePADs) have attracted widespread attention because of their inherent advantages in many applications. ePADs combine the advantages of microfluidic paper‐based devices (low cost, ease of use, equipment free pumping, etc.) for sample handling and processing with the advantages of sensitive and selective detection provided by electrochemistry. As a result, ePADs provide simplicity, portability, reproducibility, low cost and high selectivity and sensitivity for analytical measurements in a variety of applications ranging from clinical diagnostics to environmental sensing. Herein, recent advances in ePAD development and application are reviewed, focusing on electrode fabrication techniques and examples of applications specially focused on environmental monitoring, biological applications and clinical assays. Finally, a summary and prospective directions for ePAD research are also provided.     

Pencil‐drawn Paper‐based Non‐invasive and Wearable Capacitive Respiration Sensor

This paper describes a fully‐drawn pencil‐on‐paper based low‐cost capacitive sensor for non‐invasive respiration monitoring. The sensor utilizes the hygroscopic character of the paper to measure the breathing rate and pattern. The adsorption and desorption of water molecules on paper during inhalation and exhalation results in variation in its dielectric constant. This change in dielectric constant during respiration reflects the change in capacitance of the sensor. By interfacing the sensor with the microcontroller, the capacitance data was acquired and transferred to a smartphone through Bluetooth communication. Being a low cost, wearable, non‐invasive and disposable sensor, it holds tremendous potential in healthcare technology and can be commercialized into a viable product for easy‐to‐use diagnostic purpose.     

Review: Recent Developments in Enzyme-Based Biosensors for Biomedical Analysis

The need for simple, rapid, cost-effective, and portable screening methods has boosted the development of practical biosensors with applications in clinical monitoring, and diagnosis of disease. Compared with traditional analytical methods, enzyme-based bioanalytical devices have several distinct advantages such as high sensitivity and specificity, portability, cost-effectiveness, and the possibilities for miniaturization and mass production. Additionally, they can be developed for point-of-care diagnostic testing. This paper reviews recent advances in the development of enzyme biosensors, design characteristics, performances, and applications with a focus on electrochemical and optical sensors. Recent emerging technologies and innovative biosensing designs, such as nanosensors, paper based-sensors, lab-on-a-chip, biochips, and microfluidic devices are discussed. Specific applications in bioanalysis, clinical diagnosis, and pharmacology are discussed.     

Single‐Step Reagentless Laser Scribing Fabrication of Electrochemical Paper‐Based Analytical Devices

A single‐step laser scribing process is used to pattern nanostructured electrodes on paper‐based devices. The facile and low‐cost technique eliminates the need for chemical reagents or controlled conditions. This process involves the use of a CO₂ laser to pyrolyze the surface of the paperboard, producing a conductive porous non‐graphitizing carbon material composed of graphene sheets and composites with aluminosilicate nanoparticles. The new electrode material was extensively characterized, and it exhibits high conductivity and an enhanced active/geometric area ratio; it is thus well‐suited for electrochemical purposes. As a proof‐of‐concept, the devices were successfully employed for different analytical applications in the clinical, pharmaceutical, food, and forensic fields. The scalable and green fabrication method associated with the features of the new material is highly promising for the development of portable electrochemical devices.     

Paper‐Based Electrochemiluminescent 3D Immunodevice for Lab‐on‐Paper,Specific, and Sensitive Point‐of‐Care Testing

Recent research on microfluidic paper‐based analytical devices (μPADs) has shown that paper has great potential for the fabrication of low‐cost diagnostic devices for healthcare and environmental monitoring applications. Herein, electrochemiluminescence (ECL) was introduced for the first time into μPADs that were based on screen‐printed paper‐electrodes. To further perform high‐specificity, high‐performance, and high‐sensitivity ECL on μPADs for point‐of‐care testing (POCT), ECL immunoassay capabilities were introduced into a wax‐patterned 3D paper‐based ECL device, which was characterized by SEM, contact‐angle measurement, and electrochemical impedance spectroscopy. With the aid of a home‐made device‐holder, the ECL reaction was triggered at room temperature. By using a typical tris(bipyridine)ruthenium–tri‐n‐propylamine ECL system, this paper‐based ECL 3D immunodevice was applied to the diagnosis of carcinoembryonic antigens in real clinical serum samples. This contribution further expands the number of sensitive and specific detection modes of μPADs.     

Perspectives for microelectrode arrays for biosensing and membrane electroporation

Electrochemical microelectrode devices are among the great challenges for bioelectrochemistry, cell biology and recently also for biomedical research and new clinical electrotherapies. Two representative cases in cell biology and medical research for new trends in the technical devices are selected, heading at new diagnostic and therapeutic clinical applications. One example is from the field of biosensing cholinergic neurotransmitter substances by the nicotinic acetylcholine receptor (AcChoR) in solid-supported lipid bilayer membrane and the other one refers to new developments of electrode systems for the electrochemical delivery of drugs and genes to biological cell aggregates and tissue by the powerful method of membrane electroporation. In both cases addressed to, the new developments include the use of electrical feedback control of electrode arrays for biosensing processes as well as for the extent and duration of tissue electroporation. In line with the impressive advances in medical microsurgery, where increasingly smaller organ targets become accessible, microelectrode systems have become a continuous technical challenge for bioanalytical purposes and, as discussed here in some detail, for the new field of the electroporative delivery of effector substances like drugs and genes, using miniaturized electrochemical electrode arrays.     

New advances in microfluidic flow cytometry

In recent years, researchers are paying the increasing attention to the development of portable microfluidic diagnostic devices including microfluidic flow cytometry for the point‐of‐care testing. Microfluidic flow cytometry, where microfluidics and flow cytometry work together to realize novel functionalities on the microchip, provides a powerful tool for measuring the multiple characteristics of biological samples. The development of a portable, low‐cost, and compact flow cytometer can benefit the health care in underserved areas such as Africa or Asia. In this article, we review recent advancements of microfluidics including sample pumping, focusing and sorting, novel detection approaches, and data analysis in the field of flow cytometry. The challenge of microfluidic flow cytometry is also examined briefly.     

Biomass‐Derived Carbon Materials as Prospective Electrodes for High‐Energy Lithium‐ and Sodium‐Ion Capacitors

Biomass‐derived carbon materials have received special attention as efficient, low‐cost, active materials for charge‐storage devices, regardless of the power system, such as supercapacitors and rechargeable batteries. In this Minireview, we discuss the influence of biomass‐derived carbonaceous materials as positive or negative electrodes (or both) in high‐energy hybrid lithium‐ion configurations with an organic electrolyte. In such hybrid configurations, the electrochemical activity is completely different to conventional electrical double‐layer capacitors; that is, one of the electrodes undergoes a Faradaic reaction, whilst the counter electrode undergoes a non‐Faradaic reaction, to achieve high energy density. The use of a variety of biomass precursors with different properties, such as surface functionality, the presence of inherent heteroatoms, tailored meso‐/microporosity, high specific surface area, various degrees of crystallization, calcination temperature, and atmosphere, are described in detail. Sodium‐ion capacitors are also discussed, because they are an important alternative to lithium‐ion capacitors, owing to the low abundance and high cost of lithium. The electrochemical performance of carbonaceous electrodes in supercapacitors and rechargeable batteries are not discussed.     

Real‐Time Nitrophenol Detection Using Single‐Walled Carbon Nanotube Based Devices

Single‐walled carbon nanotube (SWNT) based devices have been developed for the real‐time detection of nitrophenols in aqueous solution. SWNTs are assembled to electrodes using AC dielectrophoresis technique. The SWNT devices exhibit not only high sensitivity to nitrophenol compounds, but also good reusability. Charge transfer between nitro group and SWNTs, and the metal‐nanotube interface modification are hypothesized to be the possible origins of conductance change. These results indicated that the SWNT devices can be utilized as a simple, low cost, sensitive, and reusable platform for real‐time detection of nitrophenol compounds.     

Organic thin-film transistors as transducers for (bio) analytical applications

The use of organic thin-film transistors (OTFTs) in sensorics is relatively new. Although electronic noses, electronic textiles and disposable biochemical sensors appear to be viable applications for this type of devices, the benefits of the technology still have to be proven. This paper aims to provide a review of the recent advances in the area of chemically sensitive field-effect devices based on organic thin-film transistors (OTFTs), with emphasis on bioanalytical applications. Detection principle, device configuration, materials and fabrication processes as well as sensor performances will be discussed, with emphasis on the potential for implementation in real applications and the important challenges ahead.     

An Auto‐Switchable Dual‐Mode Seawater Energy Extraction System Enabled by Metal–Organic Frameworks

Harvesting energy directly in oceans by electrochemical devices is essential for driving underwater appliances such as underwater vehicles or detectors. Owing to the extreme undersea environment, it is important but difficult to use the devices with both a high energy density and power density simultaneously. Inspired by marine organisms that have switchable energy extraction modes (aerobic respiration for long‐term living or anaerobic respiration to provide instantaneously high output power for fast movement), an auto‐switchable dual‐mode seawater energy extraction system is presented to provide high energy density and power density both by initiatively choosing different solutes in seawater as electron acceptors. With assistance from metal–organic frameworks, this device had a theoretical energy density of 3960 Wh kg^?1, and a high practical power density of 100±4 mW cm^?2 with exceptional stability and low cost, making practical applications in seawater to be possible.