On-capillary derivatization and analysis of amino acids in human plasma by capillary electrophoresis with laser-induced fluorescence detection: application to diagnosis of aminoacidopathies

A capillary electrophoresis with laser-induced fluorescence detection method for the analysis of free amino acids (AA) in human plasma was developed. A mixture of 16 AA was on-capillary derivatized with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ) and separated inside the capillary in less than 30 min using 70 mM borax-3.5 mM SDS pH 9.3 as running buffer. Four plasma samples from a healthy donor and patients suffering from phenylketonuria, propionic acidemia, and tyrosinemia type II were studied. Repeatabilities calculated as intra-day RSD (n = 3) values for the AA involved in these aminoacidopathies (glycine, phenylalanine, and tyrosine) were in the range of 0.3 to 1.2% for migration time and 3.7 to 8.2% for peak height. Reproducibilities calculated as inter-day RSD (n = 4) values for the same AA were between 0.7 and 1.4% for migration time and 4.7 and 9.1% for peak height. A fast qualitative analysis allowed the identification of the corresponding disease by comparing the electrophoretic profiles from the patient and the healthy donor and noting the increased level of the specific AA accompanying each individual disease. The results of the quantitative analysis for glycine, phenylalanine, and tyrosine in the plasma samples studied using the developed method showed a good agreement with those provided by the Center of Diagnosis of Molecular Diseases using a standard method for AA analysis.     

Efficient capillary electrophoresis separation and determination of free amino acids in beer samples

Simultaneous detection of various o‐phthalaldehyde (OPA)‐labeled amino acids (AAs) in food samples was reported based on CE separation. Ionic liquid was used for the first time for CE analysis of AAs with in‐capillary derivatization. Several other additives, including SDS, α/β‐CD, and ACN, as well as key parameters for CE separation (buffer pH value, separation voltage), were also investigated. Our results show that the multiple additive strategy exhibits good stable and repeatable character for CE analysis of OPA‐labeled AAs, for either in‐capillary derivatization or CE separation, and allows simultaneous quantification of different OPA‐labeled AAs in a large concentration range of 50 μM to 3.0 mM with LOD down to 10 μM. Seventeen OPA‐labeled AAs, except for two pairs of AAs (His/Gln and Phe/Leu), which were separated with resolutions of 1.1 and 1.2, respectively, were baseline separated and identified within 23 min using the present multiple additive strategy. The method was successfully applied for simultaneous analysis of AAs in seven beer samples and as many as eleven trace‐amount AAs were detected and quantified, indicating the valuable potential application of the present method for food analysis.     

Analysis of amino acids in individual human erythrocytes by capillary electrophoresis with electroporation for intracellular derivatization and laser-induced fluorescence detection

A method for monitoring amino acids in single erythrocytes is described. For intracellular derivatization, reagent fluorescein isothiocyanate (FITC) was introduced into living cells by electroporation. For an 8 microm erythrocyte, the analytes were diluted by a factor of only 1.6. After completion of the derivatization reaction, a single cell was injected into the separation capillary tip and lysed there. The derivatized amino acids were separated by capillary electrophoresis, followed by laser-induced fluorescence detection. Nine amino acids were quantitatively determined, with amounts of amino acids ranging from 3.8-32 amol/single cell.     

On‐line coupled capillary isotachophoresis‐capillary zone electrophoresis in hydrodynamically closed separation system hyphenated with laser induced fluorescence detection

An analytical method, based on a column coupling capillary ITP and CZE in a hydrodynamically closed separation mode hyphenated with the detection in the modular arrangement, was developed in this work. Analytical possibilities of this approach are demonstrated on the direct and ultrasensitive quantitative determination of quinine (QUI) in diluted real multicomponent ionic matrices (beverages, urine). The detection cell interface, with the rectangular arrangement of the optical channels inside, connected the separation capillary with the LIF detector via optical fibers in the on‐column detection arrangement. ITP enabled the direct large volume (30 μL) injections of the diluted real matrices with an on‐line sample pretreatment (preseparation, preconcentration) so that no external sample preparation (except for the dilution) was necessary for the separation of the analyte in the multicomponent ionic matrices. Due to the ITP sample preconcentration and intrinsic sensitivity of the LIF detection, very low concentration LOD (as low as 77 pg/mL), were reached at the same time. This was ca. two orders lower than the corresponding LOD achieved by the same 2D separation system with UV absorbance detection. Compared to the single column CE‐LIF methods applied for this model analyte and matrix, this method was found to be superior in terms of concentration LOD, with acceptable selectivity and benefits of the on‐line sample preparation. A food control and bioanalytical application clearly illustrates great practical possibilities and routine use of the proposed modular ITP–CZE–LIF technique.     

Microalgae amino acid extraction and analysis at nanomolar level using electroporation and capillary electrophoresis with laser‐induced fluorescence detection

Amino acids play a key role in food analysis, clinical diagnostics, and biochemical research. Capillary electrophoresis with laser‐induced fluorescence detection was used for the analysis of several amino acids. Amino acid labeling with fluorescein isothiocyanate was conducted using microwave‐assisted derivatization at 80°C (680 W) during only 150 s. Good electrophoretic resolution was obtained using a background electrolyte composed of sodium tetraborate buffer (100 mM; pH 9.4) and β‐cyclodextrin (10 mM), and the limits of quantification were 3–30 nM. The developed capillary electrophoresis with laser‐induced fluorescence method was used to analyze amino acids in Dunaliella salina green algae grown under different conditions. A simple extraction technique based on electroporation of the cell membrane was introduced. A home‐made apparatus allowed the application of direct and alternating voltages across the electrochemical compartment containing a suspension of microalgae in distilled water at 2.5 g/L. A direct voltage of 12 V applied for 4 min gave the optimum extraction yield. Results were comparable to those obtained with accelerated‐solvent extraction. The efficiency of electroporation in destroying microalgae membranes was shown by examining the algae surface morphology using scanning electron microscopy. Stress conditions were found to induce the production of amino acids in Dunaliella salina cells.     

Determination of picomolar concentrations of proteins using novel amino reactive chameleon labels and capillary electrophoresis laser-induced fluorescence detection

Py-1 and Py-6 are novel amino-reactive fluorescent reagents. The names given to them reflect that they consist of a pyrylium group attached to small aromatic moieties. Upon reaction with a primary amine there is a large spectral shift in the reagent, rendering them effectively fluorogenic. In this study, these reagents were used to label a test protein, (human serum albumin), and the sample was analyzed by capillary electrophoresis and laser-induced fluorescence detection. Detection limits after a 60 min labeling reaction at 22 degrees C (Py-1) and 50 degrees C (Py-6) were 6.5 ng/mL (98 pM) for Py-1 and 1.2 ng/mL (18 pM) for Py-6. Separation of immunoglobulin G (IgG), human serum albumin, lipase, and myoglobin after labeling with Py-6 were performed. The method was further modified to make it amenable to automation. Unlike many other amino reactive reagents used to label protein amino groups, reaction with Py-1 and Py-6 do not alter the charge of the protein and the advantage of this with respect to electrophoretic separations is discussed.     

Analysis of serotonin in brain microdialysates using capillary electrophoresis and native laser-induced fluorescence detection

Serotonin or 5-hydroxytryptamine (5-HT) is a major neurotransmitter in the central nervous system. In this work, a method for analyzing 5-HT in brain microdialysis samples using a commercially available capillary electrophoresis (CE) system has been developed. A pH-mediated in-capillary preconcentration of samples was performed, and after separation by capillary zone electrophoresis, native fluorescence of 5-HT was detected by a 266 nm solid-state laser. The separation conditions for the analysis of 5-HT in standard solutions and microdialysates have been optimized, and this method has been validated on both pharmacological and analytical bases. Separation of 5-HT was performed using a 80 mmol/L citrate buffer, pH 2.5, containing 20 mmol/L hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and +30 kV voltage. The detection limit was 2.5 x 10(-10) mol/L. This method allows the in vivo brain monitoring of 5-HT using a simple, accurate CE measurement in underivatized microdialysis samples.     

Discontinuous electrolyte systems for improved detection of biologically active amines and acids by capillary electrophoresis with laser-induced native fluorescence detection

On-line concentration and separation of biologically active amines and acids by capillary electrophoresis (CE) in conjunction with laser-induced fluorescence using an Nd:YAG laser at 266 nm under discontinuous conditions is presented. The suitable conditions for simultaneous analysis of amines and acids were: samples were prepared in a solution (pH* 3.1) consisting of 10 mM citric acid, 89% acetonitrile (ACN), and water; a capillary was filled with 1.5 M Tris-borate (TB) buffer (pH 10.0); and the anodic vial contained PTG10 buffer (pH* 9.0) that consists of 50 mM propanoic acid, Tris, 10% glycerol, and water. After injecting a large-volume sample, amines and acids were separately stacked at the front (cathodic side) and back (anodic side) of the acidic sample zone, mainly because of changes in their electrophoretic mobilities as a result of changes in pH, viscosity, and electric field when high voltage was applied. When the sample was injected at 15 kV for 360 s, the concentration limits of detection (LODs) for 5-hydroxytryptamine (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA) were 0.27 and 0.31 nM, respectively, which are about 400- and 800-fold sensitivity improvements when compared to those injected at 1 kV for 10 s. For the analysis of amines, samples were prepared in 100 mM citric acid (pH* 1.8) containing 89% ACN and both the capillary and anodic vial were filled with 400 mM PTG20 (propanoic acid, Tris, 20% glycerol, and water) at pH* 4.5. Using a large injection volume (15 kV for 360 s), we achieved concentration LODs of 17 pM and 0.3 nM for tryptamine and epinephrine, which are about 5200- and 14,000-fold sensitivity improvements, respectively, in comparison with those injected at 1 kV for 10 s. The features of simplicity (no sample pretreatment), rapidity (12 min), and sensitivity for identification of amines and acids of interest in urine samples show diagnostic potential of the two approaches developed in this study.     

Rapid and subnanomolar assay of recombinant human erythropoietin by capillary electrophoresis using NanoOrange precolumn labeling and laser‐induced fluorescence detection

Because of less functionally critical carbohydrate sectors that contributed to the stability, efforts have been made to quantify intact recombinant human erythropoietin. A simple, rapid capillary electrophoresis with laser‐induced fluorescence method for the assay of recombinant human erythropoietin was developed, with a limit of detection of intact recombinant human erythropoietin at subnanomolar concentration (up to 10 ng/mL or 3 × 10^?10 M), which is among the lowest reported. High sensitivity was accomplished by precolumn derivatization with the noncovalent dye NanoOrange. Capillary electrophoresis separation and reaction conditions were carefully manipulated for avoiding microheterogeneity of glycoforms and inhomogeneity of multiple labeling products. The fluorescence signal was linear over the range of 10 ng/mL–10 μg/mL, corresponding to the detection requirement of recombinant human erythropoietin in biofluids and pharmaceutical samples, as demonstrated by a real sample analysis. Although the salt in reaction mixtures showed a detrimental effect on the fluorescence of the derivatives, this method could tolerate a certain amount of salt, extending its application in biofluid analysis. In addition, zero‐order fluorescence emission kinetics was obtained, indicating that the rapid decay of recombinant human erythropoietin was derived from a self‐quenching effect.     

Chiral separation of benzothiazole derivatives of amino acids using capillary zone electrophoresis

A method for the separation of enantiomers of leucine and phenylalanine benzothiazole derivatives as potential antimicrobial agents was developed using capillary zone electrophoresis with a dual cyclodextrin (CD) system. The best resolution of enantiomers was achieved in 100 mmol/L phosphate background electrolyte (pH 3.5) with the dual CD system consisting of 10 mmol/L of β‐CD with 10 mmol/L of 2‐hydroxypropyl‐β‐cyclodextrin for leucine derivative and 10 mmol/L of 2‐hydroxypropyl‐γ‐cyclodextrin for phenylalanine derivative, respectively. Under the optimal conditions, the highest enantioresolution of 1.25 was achieved in a noncoated‐fused silica capillary at 17°C and 24 kV applied voltage.     

Analysis of amino acids in cell culture supernatant using capillary electrophoresis with contactless conductivity detection

CE-C⁴D methods for the analysis of amino acids (AAs) are presented. Combining the results from two methods with acetic acid and cyclodextrin-based BGEs, 20 proteinogenic AAs could be analyzed using CE. CE-C⁴D was also, for the first time, applied to analyze free AAs in samples of mammalian cell culture supernatant. After dilution as only sample preparation, combining the results of the two CE methods allowed monitoring the concentration changes of 17 AAs in samples taken during the cultivation of CHO cells.     

Laser-induced fluorescence detection schemes for the analysis of proteins and peptides using capillary electrophoresis

Over the past few years, a large number of studies have been prepared that describe the analysis of peptides and proteins using capillary electrophoresis (CE) and laser-induced fluorescence (LIF). These studies have focused on two general goals: (i) development of automatic, selective and quick separation and detection of mixtures of peptides or proteins; (ii) generation of new methods of quantitation for very low concentrations (nm and subnanomolar) of peptides. These two goals are attained with the use of covalent labelling reactions using a variety of dyes that can be readily excited by the radiation from a commonly available laser or via the use of noncovalent labelling (immunoassay using a labelled antibody or antigen or noncovalent dye interactions). In this review article, we summarize the works which were performed for protein and peptide analysis via CE-LIF.     

Automated sampling system for the analysis of amino acids using microfluidic capillary electrophoresis

An improved automated continuous sample introduction system for microfluidic capillary electrophoresis (CE) is described. A sample plate was designed into gear-shaped and was fixed onto the shaft of a step motor. Twenty slotted reservoirs for containing samples and working electrolytes were fabricated on the “gear tooth” of the plate. A single 7.5-cm long Teflon AF-coated silica capillary serves as separation channel, sampling probe, as well as liquid-core waveguide (LCW) for light transmission. Platinum layer deposited on the capillary tip serves as the electrode. Automated continuous sample introduction was achieved by scanning the capillary tip through the slots of reservoirs. The sample was introduced into capillary and separated immediately in the capillary with only about 2-nL gross sample consumption. The laser-induced fluorescence (LIF) method with LCW technique was used for detecting fluorescein isothiocyanate (FITC)-labeled amino acids. With electric-field strength of 320 V/cm for injection and separation, and 1.0-s sample injection time, a mixture of FITC-labeled arginine and leucine was separated with a throughput of 60/h and a carryover of 2.7%.     

Discriminative detection of low‐abundance point mutations using a PCR/ligase detection reaction/capillary gel electrophoresis method and fluorescence dual‐channel monitoring

We applied a facile LIF dual‐channel monitoring system recently developed and reported by our group to the polymerase chain reaction/ligase detection reaction/CGE method for detecting low‐abundance point mutations present in a wild‐type sequence‐dominated population. Mutation discrimination limits and signaling fidelity of the analytical system were evaluated using three mutant variations in codon 12 of the K‐ras oncogene that have high diagnostic value for colorectal cancer. We demonstrated the high sensitivity of the present method by detecting rare mutations present among an excess of wild‐type alleles (one mutation among ～100 normal sequences). This method also simultaneously interrogated the allelic compositions of the test samples with high specificity through spectral discrimination of the dye‐tagged ligase detection reaction products using the dual‐channel monitoring system.     

Coelectroosmotic capillary electrophoresis of phenolic acids and derivatized amino acids using N,N-dimethylacrylamide-ethylpyrrolidine methacrylate physically coated capillaries

Two different families of compounds, i.e., phenolic and amino acids have been separated by capillary electrophoresis using a physically adsorbed polymer as capillary coating. The polymer used was N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EpyM) and it provided an stable coating by only flushing the capillary with a DMA-EpyM aqueous solution for 2 min between runs. The usefulness of this procedure has been demonstrated through the fast analysis of different families of solutes. Two different detection systems, diode-array detector and laser-induced fluorescence, have been used to determine phenolic acids and derivatized amino acids with fluorescein isothiocyanate, respectively. The main factors affecting reversal of electroosmotic flow (EOF) such as pH, type and concentration of buffer, and concentration and influence of organic solvents, as well as all the instrumental conditions were studied and optimized for both families of compounds.     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Indirect laser-induced fluorescence detection of diuretics separated by capillary electrophoresis

Indirect LIF detection was applied to the detection of four acidic diuretics separated by CZE. Semiconductor laser was employed to provide the stable excitation of 473 nm. With an optimized electrophoretic buffer system which contained 5 mM of triethylamine, 0.1 microM of fluorescein, and 5% of n-butanol, fast separation of four diuretics (ethacrynic acid, chlorthalidone, bendroflumethiazide, and bumetanide) can be performed within 3 min with the detection limits of 0.2-2 microg/mL. The impacts of buffer components including the concentrations of the electrolytes, fluorescence probe, and the organic additives were demonstrated. The method was applied for the detection of diuretics in urine. As an alternative way for the fast analysis of diuretics, this indirect detection method provided the technical support for future microchip performances, in which diuretics may be detected in the microchip by the common LIF detector without derivatization.     

Determination of amino acids in Sargassum fusiforme by high performance capillary electrophoresis

High performance capillary electrophoresis (HPCE) was developed for quantitative determination of 18 phenylthiohydantoin (PTH)-amino acids. The influence of electrolyte concentration, pH, organic modifier and applied voltage on HPCE performance was investigated. The HPCE separation of a PTH-amino acids mixture was much improved by adding organic modifier and Tris-boric acid buffer to the run buffer. After optimization of the method, 17 PTH-amino acids in a solution containing 18 PTH-amino acids could be separated using 400 mmol l⁻¹ Tris-boric acid, 1.0 mmol l⁻¹ diethylamine at pH 9.5 adjusted with 0.1 mol l⁻¹ NaOH as a run buffer, voltage of 25 kV was applied, temperature was maintained at 25 °C, detection wavelength was 254 nm. The precision (n = 7) of this method is less than 3.2% (peak area) and 1.1% (migration time) of relative standard deviation (R.S.D.). Linearity was established over the concentration range 50-1000 μM of each derivative, with correlation coefficients (r) ranging between 0.9904 and 0.9993. The detection limits (S/N = 3) range from 2 to 48 μmol l⁻¹. The method was applied to determine amino acids in Sargassum fusiforme, a marine algae collected from Tongtou County of Zhejiang Province in China with satisfactory results.