Monosubstituted positively charged cyclodextrins: Synthesis and applications in chiral separation

Several series of novel structurally well-defined positively charged CDs, applicable to alpha-, beta- and gamma-CDs for chiral separation using CE and chromatographic techniques have been developed. The chiral resolution capabilities of different series CDs towards amino acids and anionic analytes in CE are systematically investigated by considering all separation parameters including CD type, alkyl chain length of the cations attached to the CD rim, CD concentration, buffer pH, separation temperature and organic solvent. Typical results are demonstrated in the context. Examples of chiral separation with HPLC and supercritical fluid chromatography are first demonstrated by using coated chiral stationary phases (CSPs). Optimum CD loading content on the coated CSPs was explored in the chiral separation of neutral analytes.     

Enantioseparation of chiral benzimidazole derivatives by electrokinetic chromatography using sulfated cyclodextrins

Baseline separation of 18 new substituted benzimidazole derivatives, potent AMP‐activated protein kinase (AMPK) activators, with one chiral center, was achieved by CD‐EKC using sulfated and highly sulfated CDs (SCDs and HS‐CDs) as chiral selectors. The influence of the type and concentration of the chiral selectors on the enantioseparations was investigated. The SCDs exhibit a very high enantioselectivity power since they allow excellent enantiomeric resolutions compared to those obtained with the neutral CDs. The enantiomers were resolved with analysis times around 6 min using 25 mM phosphate buffer at pH 2.5 containing either β‐S‐CD, HS‐β‐CD, HS‐γ‐CD (3 or 4% w/v) at 25°C, with a voltage of 20 kV. The apparent association constants of the inclusion complexes were calculated. The study of the solute structure‐enantioseparation relationships seems to show the high contribution of the interactions between the solutes phenyl ring and the CDs to the enantiorecognition process. The optimized method was briefly validated (LOD less than 1%) and the purity of enantiomers of compound 3 was determined. The enantiomer migration shows reversal order depending on the kind of CD.     

Capillary Zone Electrophoresis Resolutions of 2,4‐Dinitrophenyl Labeled Amino Acids Enantiomers by N‐MethylatedAmino‐β‐Cyclodextrins

Abstract

Capillary zone electrophoresis resolutions of 2,4‐dinitrophenyl labeled amino acids (DNP‐AAs) enantiomers using three N‐methylated amino‐β‐cyclodextrins (CDs) [6^I‐deoxy‐6^I‐monomethylamino‐β‐CD (M‐A‐βCD), 6^I‐deoxy‐6^I‐dimethylamino‐β‐CD (diM‐A‐βCD), 6^I‐deoxy‐6^I‐trimethylammonium‐β‐cyclodextrin (triM‐A‐βCD)] as chiral selectors were investigated. These cationogenic selectors, differing in ionization and steric properties, exhibited clear differences in their enantioselectivities.

The differences in enantioresolution observed under identical acid‐base conditions (pH 5.2), providing comparable effective charges/mobilities of the CDs, e.g., excellent separations of single enantiomeric couples (triM‐A‐βCD, M‐A‐βCD), multicomponent mixtures of enantiomers (M‐A‐βCD), and mixtures of positional isomers (M‐A‐βCD, diM‐A‐βCD), indicated the importance of structural parameters (different degrees of methylation) of the studied chiral selectors in the separation mechanism.

The differences in enantioresolution observed under various acid base conditions (pH 5.2 and 9.6), providing significant differences of effective charges/mobilities of CDs, e.g., a dramatic decrease in enantioresolution as well as achiral resolution with uncharged M‐A‐βCD and preserved resolution with permanently charged triM‐A‐βCD, indicated the importance of charge of the studied chiral selectors in the separation mechanism.

The present study clearly showed that the studied CD derivatives have great potential as chiral selectors in capillary zone electrophoresis separations of DNP‐AAs and that their effective use is related to the character of the analyte (structure, hydrophobicity) as well as to working conditions (pH).     

Analysis of aromatic acids by nonaqueous capillary electrophoresis with ionic‐liquid electrolytes

The separation of six kinds of aromatic acids by CZE with 1‐ethyl‐3‐methylimidazolium chloride (EMIMCl) and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO₄)_, two kinds of ionic liquids (ILs) as background electrolytes, and acetonitrile as solvent were investigated. The six kinds of aromatic acids can be separated under positive voltage with low IL concentration with either of the two ILs and separation with EMIMHSO₄ is better in consideration of peak shapes and separation efficiency. But the migration order is different when the IL is different. Under negative voltage with high IL concentration, the six analytes can be separated with EMIMCl as background electrolytes and the migration order of the analytes is opposite to those with low concentration of EMIMCl as background electrolyte. The separations are based on the combination effects of heteroconjugation between the anions and cations in the ILs and the analytes, of which the heteroconjugation between the anions in the ILs and the analytes plays a dominant role. The heteroconjugation between the anions of the ILs and analytes is proton sensitive and only a very small amount of proticsolvents added into the electrolyte solution can harm the separation. When EMIMCl concentration is high, the heteroconjugation between the IL anions and the proton in the analytes make the effective mobility of the analytes much higher than the EOF and their migration direction reversed. Finally, the six aromatic acids in water samples were analyzed by nonaqueous CE with low concentration of EMIMHSO₄ as background electrolytes with satisfactory results.     

Use of cyclodextrins in isotachophoresis : VI. Cyclodextrins as leading electrolyte additives for the separation of bile acids

Cyclodextrins (CDs) and some of their methyl derivatives have been used for the optimization of the isotachophoretic separation of bile acids in aqueous electrolyte systems. The addition of heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin to the leading electrolyte proved useful for both the solubilization and the structural differentiation of the solutes studied and led to the successful separation of their mixtures. Other CDs tested, even if they gave a satisfactory solubilization effect, did not support the resolution of bile acid mixtures.     

Separation of neutral and basic enantiomers by cyclodextrin electrokinetic chromatography using anionic cyclodextrin derivatives as chiral pseudo-stationary phases

Separations of neutral and basic racemates were performed using five different anionic cyclodextrin (CD) derivatives as chiral selectors, viz. carboxymethylated β-CD, β-CD phosphate sodium salt, sulfobutyl ether β-CD sodium salt, carboxymethylated γ-CD, and γ-CD phosphate sodium salt. For the separation of neutral racemates, an untreated fused silica capillary was employed and various neutral racemates were successfully separated. Since the pH of the buffer affected the electroosmotic flow (EOF), the resolution was improved by changing the buffer pH. A polyacrylamide coated capillary was employed for the separation of basic racemates to suppress EOF and to prevent adsorption of cationic analyte on the capillary surface. By choosing an appropriate type and concentration of anionic CD, about 40 basic racemates were successfully separated. Some rough binding constants of basic analytes with an anionic β-CD were measured to discuss the optimum concentration of the CD. The migration direction was dependent on the binding constants and the concentration of the CD. The analyte strongly bound to the anionic CD migrated towards the anode but the weakly bound one moved towards the cathode. Anionic γ-CDs were also very useful for the separation of basic enantiomers. Five neutral CDs were employed as chiral selectors to compare selectivity between charged and neutral CDs, and eleven racemates could only be resolved using anionic CDs. The separation of some basic racemates in human plasma was also described. The direct injection of plasma samples was possible for some enantiomers that did not interact strongly with plasma proteins.     

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C⁴D‐LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid, 15 mM 2‐amino‐2‐hydroxymethyl‐propane‐1,3‐diol, and 2 mM 18‐crown‐6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double‐opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C⁴D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.     

A family of single‐isomer,dicationic cyclodextrin chiral selectors for capillary electrophoresis: Mono‐6A‐ammonium‐6C‐butylimidazolium‐β‐cyclodextrin chlorides

The first member of the single‐isomer, dicationic cyclodextrin (CD) family, 6^A‐ammonium‐6^C‐butylimidazolium‐β‐cyclodextrin chlorides (AMBIMCD), has been synthesized, analytically characterized, and used to separate a variety of acidic enantiomers and amino acids by CE. Starting from mono‐6^A‐azido‐β‐cyclodextrin, the cationic imidazolium and ammonium moieties were subsequently introduced onto primary ring of β‐cyclodextrin via nucleophilic addition and Staudinger reaction. The analytically pure AC regio‐isomer CD was further obtained via column chromatography. This dicationic CD exhibited excellent enantioselectivities for selected analytes at concentration as low as 0.5 mM, which were even better than those of its mono‐imidazolium or ammonium‐substitued counterpart CDs at 10 equivalent concentrations. The effective mobilities of all studied analytes were found to decrease with the concentration of AMBIMCD. Inclusion complexation in combination with eletrostatic interactions seemed to account for the enhanced chiral discrimination process.     

Separation of acidic and neutral compounds by strong anion-exchange capillary electrochromatography dynamically modified with sodium dodecylsulfate

Summary Acidic and neutral compounds have been separated by strong anion-exchange capillary electrochromatography (SAXCEC) dynamically modified by addition of sodium dodecylsulfate (SDS). It was found that separation of neutral solutes by SAXCEC without addition of SDS is difficult because of the weak interaction of the solutes with the hydrophilic packing surface. The hydrophobicity of the packing surface increases on addition of SDS to the mobile phase, however, and the capacity of separating neutral solutes increases. Acidic solutes are retained, mainly because of the ion-exchange properties of this system. The influence of mobile phase composition, e.g. SDS concentration, ionic strength, and organic modifier fraction, on the retention of acidic and neutral solutes was investigated. Three acids and five neutral solutes were separated in only 5 min under optimized conditions, because the direction of the strong electroosmotic flow (EOF) was the same as that of electrophoretic migration of the acids under the conditions used. The repeatability of this system in terms of migration time relative standard deviation (RSD) is good—less than 0.48% for 10 consecutive runs of all the solutes tested. Column efficiencies for acids were > 125000 plates m⁻¹; those for neutral solutes varied from 25000 to 100000 plates m⁻¹.     

Enantiomeric analysis of baclofen analogs by capillary zone electrophoresis, using highly sulfated cyclodextrins: Inclusion ionization constant pKa determination

Using cyclodextrin-capillary zone electrophoresis (CD-CZE), baseline separation of baclofen phaclofen, saclofen, and hydroxy-saclofen, potent gamma-aminobutyric acid(B) (GABA(B)) agonist or antagonists was achieved. A method for the enantioresolution of those analogs of GABA was developed using anionic cyclodextrins (highly sulfated CD or highly S-CD) as chiral selectors and capillaries dynamically coated with polyethylene oxide (PEO). With charged CDs we observed good resolutions due to the large electrophoretic mobility of these chiral selectors opposite to the mobility of the solutes. The highly S-alpha-CD and S-beta-CD were found to be complementary and the most effective complexing agent, allowing good enantiomeric resolution in short runtimes. The complete resolution was obtained using 25 mM phosphate buffer at pH 2.5 containing 3% w/v of highly S-alpha-CD or S-beta-CD at 25 degrees C with an applied field of 0.30 kV/cm. The apparent binding constants of the inclusion complexes were evaluated and the migration order was determined. A comparison was possible to investigate the importance of the anionic group of the molecules in the separations. The pK(a) values were determined for all four compounds in order to explain relative electrophoretic migration of the solutes.     

Separation of catechin epimers by complexation using ion mobility mass spectrometry

Ion mobility coupled with mass spectrometry provides a fast and repeatable method to separate catechin epimers by previous complexation with selected chiral modifiers and transition metals. Several combinations with chiral ligands such as D‐ and L‐amino acids and/or additional metal cations, chiral crown ethers, tartaric acid and heptakis(2,6‐di‐O‐methyl)‐β‐cyclodextrin were screened for their ability to affect the separation efficiency. The clusters having the form of [2M + D‐amino acid + Cu²⁺ ? 3H]^? (M stands for (?)‐epicatechin or (+)‐catechin) showed improvement in stereodifferentiation between two epimeric catechins in comparison to the analysis of pure epimers, where no separation was observed or the separation was hampered by the formation of mixed dimer complexes. Among various examined D‐amino acids only those possessing hydrophobic side chains induced the improvement of separation efficiency. The best peak‐to‐peak resolution (R_p–p) was determined to be 0.71 for [2M + D‐Leucine + Cu²⁺ ? 3H]^? clusters. Copyright © 2015 John Wiley & Sons, Ltd.     

Ionic Conductivity of β‐Cyclodextrin–Polyethylene‐Oxide/Alkali‐Metal‐Salt Complex

Highly conductive, crystalline, polymer electrolytes, β‐cyclodextrin (β‐CD)–polyethylene oxide (PEO)/LiAsF₆ and β‐CD–PEO/NaAsF₆, were prepared through supramolecular self‐assembly of PEO, β‐CD, and LiAsF₆/NaAsF₆. The assembled β‐CDs form nanochannels in which the PEO/X⁺ (X=Li, Na) complexes are confined. The nanochannels provide a pathway for directional motion of the alkali metal ions and, at the same time, separate the cations and the anions by size exclusion.     

Chiral separation of N-imidazole derivatives, aromatase inhibitors, by cyclodextrin-capillary zone electrophoresis. Mechanism of enantioselective recognition

Baseline separation of ten new, substituted [1-(imidazo-1-yl)-1-phenylmethyl)] benzothiazolinone and benzoxazolinone derivatives with one chiral center was achieved using cyclodextrin-capillary zone electrophoresis (CD-CZE). A method for the enantiomeric resolution of these compounds was developed using neutral CDs (native alpha-, beta-, gamma-CDs or alpha-, beta-, gamma-hydroxypropyl (HP)-CDs) as chiral selectors. Operational parameters including the nature and concentration of the chiral selectors, pH, ionic strength, organic modifiers, temperature, and applied voltage were investigated. The use of neutral CDs provides enantiomeric resolution by inclusion of compounds in the CD cavity. The HP-alpha-CD and HP-beta-CD were found to be the most effective complexing agents and allowed efficient enantiomeric resolutions. Optimal separation of N-imidazole derivatives was obtained using 50 mM phosphate buffer at pH 2.5 containing either HP-alpha-CD or HP-beta-CD (7.5-12.5 mM) at 25 degrees C, with an applied field of 0.50 kV.cm(-1) giving resolution factors Rs superior to 1.70 with migration times of the second enantiomer less than 13 min. The same enantiomer migration order observed for all molecules can be related to a close interaction mechanism with CDs. The influence of structural features of the solutes on Rs and tm was studied. The lipophilic character (log kw) of the solutes and the apparent and averaged association constants of inclusion complexes for four compounds with the six different CDs led us to rationalize the enantioseparation mechanisms. The conclusions were corroborated with reversed-phase high-performance liquid chromatography (HPLC) on chiral stationary phases (CSPs) based on CDs.     

Effect of urea addition on chiral separation of dansylamino acids by capillary zone electrophoresis with cyclodextrins

The chiral separation ability of unmodified and di- and trimethylated -, β- and γ-cyclodextrins (CDs) as chiral selectors in capillary zone electrophoresis was investigated in the presence of urea derivatives using twelve dansylamino acids as model solutes. The addition of these urea derivatives (unsubstituted, methyl-, ethyl- and 1,3-dimethylureas) produced dramatic enhancement in the enantioselectivity of unmodified β-CD but also reduced the enantioselectivities of the other CDs.     

Recent innovations in the use of charged cyclodextrins in capillary electrophoresis for chiral separations in pharmaceutical analysis

A review is presented on the use of charged cyclodextrins (CDs) as chiral selectors in capillary electrophoresis (CE) for the separation of analytes in pharmaceutical analysis. An overview is given of theoretical models that have been developed for a better prediction of the enantiomeric resolution and for a better understanding of the separation mechanism. Several types of charged CDs have been used in chiral capillary electrophoretic separation (anionic, cationic, and amphoteric CDs). Especially the anionic CDs seem to be valuable due to the fact that many pharmaceutically interesting compounds can easily be protonated (e.g., amine groups). For that reason several anionic CDs are now commercially available. Cationic and amphoteric CDs are less common in chiral analysis and only a few are commercially available. Attention is paid to the most common synthesis routes and the characterization of the CDs used in chiral capillary electrophoretic separations. The degree of substitution in the synthesized CDs may vary from one manufacturer to another or even from batch to batch, which may have a detrimental effect on the reproducibility and ruggedness of the separation system. In Sections 4, 5, and 6 the applications of anionic, cationic, and amphoteric CDs for the chiral separation in CE are described. Many interesting examples are shown and the influence of important parameters on the enantioselectivity is discussed.     

Ring-opening polymerisation of ɛ-caprolactone catalysed by Brønsted acids

Two new Brønsted acids [2,2′-ethylidene-bis (4,6-di-tert-butylphenol)] phosphoric acid (EDBPPOOH) and (3,3′,5,5′-tetra-tert-butylbiphenyl-2,2′-diol) phosphoric acid (TBPO-POOH) were synthesised and fully characterised by ¹H NMR and ¹³C NMR spectra and mass spectra. The ringopening polymerisation (ROP) of ?-caprolactone (?-CL) catalysed by the two Brønsted acids proceeded at 110°C without a solvent or at ambient temperature in toluene. Experimental results indicated that the two Brønsted acids were efficient catalysts for the ROP of ?-CL with moderate number-average molar mass (Mn) and narrow polydispersity indices (PDI). The catalytic activity of TBPO-POOH is higher than EDBP-POOH in the ROP of ?-CL. After benzyl alcohol was added, it was able to accelerate the polymerisation process. The polymerisation can also occur with the addition of water with a monomer/catalyst/initiator mole ratio of 100: 1: 1. The living polymerisation was ascertained by the linear relationships of the Mn vs. monomer conversion, then it was further confirmed by a second-feed experiment of a double monomer producing double Mn. A kinetic study of the relationships between monomer concentration and time revealed a first-order dependence on monomer concentration in the polymerisation. End-group analysis of ¹H NMR spectra and electrospray-ionisation mass spectra suggests that the two Brønsted acids are capable of catalysing and initiating the ROP of ?-CL.     

Enantiomeric Separations in Capillary Electrochromatography with Crown Ether‐Capped β‐Cyclodextrin‐Bonded Silica Particles as Chiral Stationary Phase

Two novel types of crown ether capped β‐cyclodextrin (β‐CD) bonded silica, namely, 4′‐aminobenzo‐X‐crown‐Y (X=15, 18 and Y=5, 6, resp.) capped [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy] propylsilyl‐appended silica, have been prepared and used as stationary phases in capillary electrochromatography (CEC) to separate chiral compounds. The two stationary phases have a chiral selector with two recognition sites: crown ether and β‐CD. They exhibit excellent enantioselectivity in CEC for a wide range of compounds. After inclusion of metal ions (Na⁺ or K⁺) from the running buffer into the crown ether units, the stationary phases become positively charged and can provide extra electrostatic interaction with ionizable solutes and enhance the dipolar interaction with polar neutral solutes. This enhances the host‐guest interaction with the solute and improves chiral recognition and enantioselectivity. Due to the cooperation of the anchored β‐CD and the crown ether, this kind of crown ether capped β‐CD bonded phase shows better enantioselectivity than either β‐CD‐ or crown ether bonded phases only. These new types of stationary phases have good potential for fast chiral separation with CEC.     

Purification of amino acids and small peptides with hollow fibers

Permeation through hollow fibers made of a perfluorinated ionomer membrane of the Nafion type is shown to be a possible way to separate amino acids and small peptides. The fiber has a surface area to volume ratio of 56 cm² cm^?3. Twenty-six different amino acids and small peptides with up to six amino acid units were used for permeation studies. The results show that the bulk pH is the essential parameter acting on the permeation rates and diffusion coefficients through the tubing wall. The cationic forms of the solutes, at a pH lower than their isoelectric points, were highly retained by the cation-exchange membrane. The anionic forms of the solutes, at a pH higher than the isoelectric point, were less retained. The zwitterionic and non-ionic forms had the highest permeation rates, reaching 2.2 × 10^?3 s^?1. The effect of methanol addition was studied. The permeation rates increased, but the selectivity decreased     

System Peaks of Cyclodextrins in Capillary Electrophoresis

Using a running buffer containing cyclodextrins (CDs) and 2‐[N‐cyclohexylamino]‐ethanesulfonic acid (CHES), positive system peaks were observed in the analysis of a ganglioside mixture by CE‐UV. These system peaks were related to CDs in the running buffer because these peaks were also detected when a plug of solution devoid of CDs but having the same CHES concentration and pH as the running buffer was injected. Neutral CDs were separated owing to the formation of inclusion complexes with the anionic CHES ion. One possible explanation for the positive system peaks is that the anionic CD‐CHES inclusion complex is displaced by co‐ions with higher UV absorptivity.     

Micellar electrokinetic capillary chromatography of nucleic acid constituents and dinucleoside monophosphate photoproducts

Micellar electrokinetic capillary chromatography has been explored as an efficient and rapid method of separating the photoproducts of 2′-deoxyuridylyl-(3′-5′)-thymidine (i.e., cis-syn and trans-syn cyclobutane dimers, (6–4) photoproduct, and the related Dewar valence isomer) from normal nucleosides and nucleotides. Three cationic surfactants, dodecyl-, tetradecyl-, and hexadecyltrimethy-lammonium bromide were evaluated and the separations compared with those obtainable with the anionic surfactant, sodium dodecylsulfate. Optimum resolution of the dinucleoside monophosphate photoproducts was obtained using tetradecyltrimethylammonium bromide. By use of this detergent the photoproducts could also be separated from other normal constituents in less than 6 min at ?25 kV. Dodecyl- and hexadecyltrimethylammonium bromide provided some separation between the various species but sodium dodecylsulfate did not separate the UV radiation-induced products from either the parent compound or other dinucleoside monophosphates. Increased interaction between negatively charged solutes and positively charged micelles accounts for the differences.