Application of Non‐Stop‐Flow Differential Pulse Voltammetry at a Tubular Detector of Silver Solid Amalgam for Electrochemical Determination of Lomustine (CCNU)

An application of the flow differential pulse voltammetry with tubular detector based on silver solid amalgam for determination of antineoplastic drug lomustine in pharmaceutical preparations is presented. The highest sensitivity was obtained in [0.10 mol dm^?3 MES; 2.00 mol dm^?3 NaCl; pH 6.0]:EtOH (9 : 1) with flow rate 0.50 mL min^?1, and the magnitude of the modulation amplitude ?0.070 V. The calibration dependence was linear in the range 1×10^?6–1 × 10^?4 mol dm^?3 (R²=0.999). The limit of detection was 1.5×10^?7 mol dm^?3. This method was successfully used for determination of lomustine in real samples of chemotherapy drug CeeNU Lomustine 40 mg.     

Tubular Detector of Silver Solid Amalgam for Electrochemical Measurements in Flow Systems

This paper presents the application of the tubular detector based on silver solid amalgam (TD‐AgSA) for electrochemical determinations of reducible inorganic (Cd²⁺, Zn²⁺) and organic (4‐nitrophenol) compounds under flow injection analysis conditions. The newly developed TD‐AgSA is simple, robust and inexpensive. The limits of detections of Zn²⁺, Cd²⁺ and 4‐nitrophenol are 1.4×10^?6, 7.0×10^?7, and 5.0×10^?7 mol dm^?3, respectively (i.e. 0.09, 0.08 and 0.07 ppm). The obtained results proved the long‐term stability of the detector (RSD of the determination of Zn²⁺, Cd²⁺, and 4‐nitrophenol were 0.8, 0.9 and 0.8 % (n=10; c_Zn=7.7×10^?5 mol dm^?3, c_Cd=4.5×10^?5 mol dm^?3 and c_4‐NPh=3.6×10^?5 mol dm^?3), respectively and its applicability for cathodic measurements in aqueous solutions at potentials up to ?2 V.     

A Lactulose Bienzyme Biosensor Based on Self‐Assembled Monolayer Modified Electrodes

A bienzyme biosensor in which the enzymes β‐galactosidase (β‐Gal), fructose dehydrogenase (FDH), and the mediator tetrathiafulvalene (TTF) were coimmobilized by cross‐linking with glutaraldehyde atop a 3‐mercaptopropionic acid (MPA) self‐assembled monolayer on a gold disk electrode, is reported. The working conditions selected were E_app=+0.10 V and (25±1) °C. The useful lifetime of one single TTF‐β‐Gal‐FDH‐MPA‐AuE was surprisingly long, 81 days. A linear calibration plot was obtained for lactulose over the 3.0×10^?5–1.0×10^?3 mol L^?1 concentration range, with a limit of detection of 9.6×10^?6 mol L^?1. The effect of potential interferents (lactose, glucose, galactose, sucrose, and ascorbic acid) on the biosensor response was evaluated. The behavior of the SAM‐based biosensor in flow‐injection systems in connection with amperometric detection was tested. The analytical usefulness of the biosensor was evaluated by determining lactulose in a pharmaceutical preparation containing a high lactulose concentration, and in different types of milk. Finally, the analytical characteristics of the TTF‐β‐Gal‐FDH‐MPA‐AuE are critically compared with those reported for other recent enzymatic determinations of lactulose.     

Amperometric Biosensor for the Determination of Phenols Using a Crude Extract of Sweet Potato (Ipomoea Batatas (L.) Lam.)

Abstract

An amperometric biosensor for the determination of phenols is proposed using a crude extract of sweet potato (Ipomoea batatas (L.) Lam.) as an enzymatic source of polyphenol oxidase (PPO; tyrosinase; catechol oxidase; EC 1.14.18.1). The biosensor is constructed by the immobilization of sweet potato crude extract with glutaraldehyde and bovine serum albumin onto an oxygen membrane. This biosensor provides a linear response for catechol, pyrogallol, phenol and p-cresol in the concentration ranges of 2.0×10^?5-4.3×10^?4mol L^?1, 2.0×10^?5-4.3×10^?4 mol L^?1, 2.0×10^?5-4.5×10^?4 mol L^?1 and 2.0×10^?5-4.5×10^?4mol L^?1, respectively. The response time was about 3–5 min for the useful response range, and the lifetime of this electrode was excellent for fifteen days (over 220 determinations for each enzymatic membrane). Application of this biosensor for the determination of phenols in industrial wastewaters is presented.     

Voltammetric Determination of Selected Aminoquinolines Using Carbon Paste Electrode

Optimum conditions have been found for voltammetric determination of mutagenic 5‐aminoquinoline, 6‐aminoquinoline and 3‐aminoquinoline by differential pulse voltammetry and adsorptive stripping differential pulse voltammetry on carbon paste electrode. The lowest limits of determination were found for adsorptive stripping differential pulse voltammetry in 0.1 mol dm^?3 H₃PO₄ (5×10^?7 mol dm^?3 , 1×10^?7 mol dm^?3, and 1×10^?7 mol dm^?3 for 5‐aminoquinoline, 6‐aminoquinoline and 3‐aminoquinoline, respectively). The possibility to determine mixtures of 8‐aminoquinoline with 3‐aminoquinoline or 5‐aminoquinoline or 6‐aminoquinoline, and mixtures of 5‐aminoquinoline with 3‐aminoquinoline or 6‐aminoquinoline by differential pulse voltammetry was verified. Binary mixtures of 8‐aminoquinoline with 3‐aminoquinoline or 6‐aminoquinoline, and of 3‐aminoquinoline with 5‐aminoquinoline could be successfully analyzed.     

The cathodic stripping voltammetric determination of traces of iodide with a hanging copper amalgam drop electrode

A hanging copper amalgam drop electrode (HCADE) is used for the determination of traces of iodide by cathodic stripping voltammetry. The cathodic stripping peak of copper(I) iodide from the HCADE is better defined than that of mercury(I) iodide from a hanging mercury drop electrode. Optimum conditions and interferences are reported. With a 3-min deposition time at ?0.1 V vs. SCE, the calibration plot is linear up to 2 × 10^?6 mol dm^?3 iodide. The detection limit for iodide with the HCADE under voltammetric conditions is 4 × 10^?8 mol dm^?3; this is lowered to 8 × 10^?9 mol dm^?3 by using the differential pulse stripping technique.     

Bioelectroanalytical Determination of Rutin Based on bi‐Enzymatic Sensor Containing Iridium Nanoparticles in Ionic Liquid Phase Supported in Clay

A matrix comprising iridium nanoparticles and 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid (Ir‐BMI.BF₄) supported in montmorillonite (MMT) was obtained through an efficient incorporation process. This modified clay matrix (Ir‐BMI.BF₄‐MMT) was used for the immobilization of the enzymes laccase (LAC) and polyphenol oxidase (PPO) and employed in the construction of a bi‐enzymatic biosensor for determination of rutin by square‐wave voltammetry. Under optimized conditions, the analytical curve showed a linear range for rutin concentrations from 9.17×10^?8 to 3.10×10^?6 mol L^?1 with a detection limit of 3.09×10^?8 mol L^?1. The method was successfully applied to the determination of rutin content in pharmaceutical samples.     

An Electroanalytical Sensor for the Detection of Gramoxone (Paraquat)

ABSTRACT

Glassy Carbon Electrodes coated with stearic acid provide an amperometric sensor for detection of paraquat, the active ingredient of the herbicide Gramoxone. The linear dynamic range of the sensor for Paraquat is 1.02 × 10^?3 mol dm^?3 to 1.02 × 10^?2 mol dm^?3 with the minimum detection limit 6.37 × 10^?4 mol dm^?3.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

Precipitation of copper(II) by formation of a complex with 2,4-dioxo-4-(4-hydroxy-6-methyl-2-pyrone-3-yl) butyric acid ethyl ester

Mononuclear copper(II) complex with 2,4-dioxo-4-(4-hydroxy-6-methyl-2-pyrone-3-yl) butyric acid ethyl ester is readily precipitated in ethanolic medium. The metal to ligand ratio in the crystalline species was found to be 1:2. On the basis of the spectroscopic data collected so far, the site of coordination could not be identified. The detection limit of the precipitation of the binuclear complex in aqueous buffer, pH 7.00, solution is at a 2 × 10^?5 mol dm^?3 copper(II) concentration. By radiometric measurements with ⁶⁴Cu isotope, the time neccessary for a quantitative precipitation, the amount of copper(II) in the precipitate and in the solution, the amount of ligand needed for the optimal precipitation yield, and the solubility product of the complex were determined.The precipitate separated from the supernatant can be dissolved in ethanol and copper(II) determined by absorbance measurement at 374 nm. The sensitivity of this procedure lies at the detection limit of the complex precipitation. The calibration diagram, a straight line (b = 0.00677; s_b = 0.00003; s² = 0.00146), confirms the validity of Beer's law in the range of 2 × 10^?5? 4 × 10^?4 mol dm^?3 copper(II) concentrations, with a systematic error of 7 × 10^?6 mol dm^?3 arising from solubility loss of the precipitate remaining constant.Concentrations exceeding 10^?6 mol dm^?3 of nickel(II) cause too high values and those exceeding 10^?5 mol dm^?3 of aluminium, zinc, iron(II), thorium(IV), or vanadium(V) too low values in copper determinations.     

An Inexpensive Biosensor for Uric Acid Determination in Human Serum by Flow‐Injection Analysis

An inexpensive and easy to construct miniaturized biosensor is described for the determination of uric acid in biological fluids. The amperometric biosensor was prepared by using a carbon paste electrode prepared with uricase from Arthrobacter globiforms and tetracyanoquinodimethane as electron transfer mediator. When incorporated into a flow‐injection system it was enabled to perform 50 measurements/h of uric acid in the analytical range of 1–100 μmol dm^?3 with a relative standard deviation of 0.20% (n=14). The system was applied to human serum samples analysis providing good data correlation with those obtained by the reference spectrophotometric method. A linear relationship AM (μmol dm^?3)=1.02 (±0.05) SP (μmol dm^?3) ?0.12 (±0.13) was obtained evidencing the absence of significant error. The constructed biosensor was successfully used for at least four months (250 assays) with only a 13% of decrease in the enzymatic activity.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin/ZnO‐Chitosan/nano‐Au Modified Glassy Carbon Electrode

The highly efficient H₂O₂ biosensor was fabricated on the basis of the complex films of hemoglobin (Hb), nano ZnO, chitosan (CHIT) dispersed solution and nano Au immobilized on glassy carbon electrode (GCE). Biocompatible ZnO‐CHIT composition provided a suitable microenvironment to keep Hb bioactivity (Michaelis‐Menten constant of 0.075 mmol L^?1). The presence of nano Au in matrix could effectively enhance electron transfer between Hb and electrode. The electrochemical behaviors and effects of solution pH values were carefully examined in this paper. The (ZnO‐CHIT)‐Au‐Hb/GCE demonstrated excellently electrocatalytical ability for H₂O₂. This biosensor had a fast response to H₂O₂ less than 4 s and excellent linear relationships were obtained in the concentration range from1.94×10^?7 to 1.73×10^?3 mol L^?1 with the detection limit of 9.7×10^?8 mol L^?1 (S/N=3) under the optimum conditions. Moreover, the stability and reproducibility of this biosensor were evaluated with satisfactory results.     

Electrochemical DNA Biosensor Based on Graphene and TiO2 Nanorods Composite Film for the Detection of Transgenic Soybean Gene Sequence of MON89788

Based on graphene (GR), TiO₂ nanorods, and chitosan (CTS) nanocomposite modified carbon ionic liquid electrode (CILE) as substrate electrode, a new electrochemical DNA biosensor was effectively fabricated for the detection of the transgenic soybean sequence of MON89788. By using methylene blue (MB) as hybridization indicator for monitoring the hybridization with different ssDNA sequences, the differential pulse voltammetric response of MB on DNA modified electrodes were recorded and compared. Due to the synergistic effects of TiO₂ nanorods and GR on the electrode surface, the electrochemical responses of MB were greatly increased. Under optimal conditions the differential pulse voltammetric response of the target ssDNA sequence could be detected in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 7.21×10^?13 mol/L (3σ). This electrochemical DNA biosensor was further applied to the polymerase chain reaction (PCR) product of transgenic soybeans with satisfactory results.     

A Hydrogen Peroxide Biosensor Based on Room Temperature Ionic Liquid Functionalized Graphene Modified Carbon Ceramic Electrode

A room temperature ionic liquid (IL) 1‐butyl‐3‐methylimidazolium hexafluorophosphate functionalized graphene (GE) was prepared and a hydrogen peroxide (H₂O₂) biosensor was fabricated by immobilizing hemoglobin (Hb) into the IL‐GE composite film. UV‐visible and Fourier transform infrared spectra of the composite film indicated that Hb retained its native structure in the film. Electrochemical investigation of the biosensor showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa=?0.209 V and E_pc= ?0.302 V (vs. SCE) in pH 7.0 phosphate buffer solution at the scan rate of 100 mV/s. To the reduction of H₂O₂, the biosensor had a good linear range from 8.0×10^?7 to 1.8×10^?4 mol/L with a detection limit of 3.0×10^?7 mol/L. The apparent Michaelis‐Menten constant K^app_M was estimated to be 3.4×10^?5 mol/L.     

Cerium (IV)-2-chloroethanol redox-pair initiated polymerization of acrylamide in aqueous medium

The kinetics of acrylamide polymerization has been investigated by employing cericammoniumnitrate-2-chloroethanol redox pair under nitrogen atmosphere at 30 ± 1°C. The rate of monomer disappearance is directly proportional to the concentration of 2-chloroethanol (1.0 × 10^?2 ? 10.0 × 10^?2 mol. dm^?3) and is inversely proportional to the ceric ion concentration (2.5 × 10^?3 ? 10.0 × 10^?3 mol. dm^?3) but shows square dependence to the concentration of monomer (5.0 × 10^?2 ? 25.0 × 10^?2 mol. dm^?3). The rate of ceric ion disappearance is directly proportional to the initial concentration of ceric ion and 2-chloroethanol but independent of acrylamide concentration. The viscometric average molecular weight (M _v) decreases on increasing the concentration of ceric ion and increases on increasing the concentrations of acrylamide and 2-chloroethanol. A tentative mechanism has been proposed.     

Amperometric Biosensor Based on Enzymatic Reactor for Choline Determination in Flow Systems

A simple, selective and stable biosensor with the enzymatic reactor based on choline oxidase (ChOx) was developed and applied for the determination of choline (Ch) in flow injection analysis with amperometric detection. The enzyme ChOx was covalently immobilized with glutaraldehyde to mesoporous silica powder (SBA‐15) previously covered by NH₂‐groups. This powder was found as an optimal filling of the reactor. The detection of Ch is based on amperometric monitoring of consumed oxygen during the enzymatic reaction, which is directly proportional to Ch concentration. Two arrangements of an electrolytic cell in FIA, namely wall‐jet cell with working silver solid amalgam electrode covered by mercury film and flow‐through cell with tubular detector of polished silver solid amalgam were compared. The experimental parameters affecting the sensitivity and stability of the biosensor (i. e. pH of the carrier solution, volume of reactor, amount of the immobilized enzyme, the detection potential, flow rate, etc.) were optimized. Under the optimized conditions, the limit of detection was found to be 9.0×10^?6 mol L^?1. The Michaelis‐Menten constant for covalently immobilized ChOx on SBA‐15 was calculated. The proposed amperometric biosensor with the developed ChOx‐based reactor exhibits good repeatability, reproducibility, long‐term stability, and reusability. Its efficiency has been confirmed by the successful application for the determination of Ch in two commercial pharmaceuticals.     

Fluorescence Enhancement of Rare Earths by Yttrium and its Application

Abstract

A study of the enhancement effect on the fluorescence intensity of the Eu³⁺–-thenoyltrifluoroacetone (TTA)–-cetyltri–-methylammonium bromide (CTMAB) and the Dy³⁺ pyrocatechol–-3,5-disulphonic acid (Tiron) systems by Y³⁺has been carried out. In the presence of yttrium the fluorescence intensity of the systems was enhanced by a factor of about 100 and 15, respectively. The fluorescence intensity was a linear function of the concentration of europium or dysprosium in the range 1.0 × 10^?10–-1.0 × 10^?8mol dm^?3 and 8.0 × 10^?8–-9.0 × 10^?6mol dm^?3, respectively. The detection limit was 1.0 × 10^?11mol dm^?3 and 1.0 × 10^?10mol dm^?3, respectively. The standard addition method was used for the determination of europium or dysprosium in rare earth oxides and gave satisfactory results. The mechanism of enhanced fluorescence was proposed.     

Glucose Biosensor Based on Silicon Nitride Nanoparticles

For the first time silicon nitride (Si₃N₄) nanoparticles was used for preparation electrochemical biosensor. GOx immobilized on the Si₃N₄ nanoparticles exhibits facile and direct electrochemistry. The surface coverage and heterogeneous electron transfer rate constant (k_s) of immobilized GOx were 6.3×10^?13 mol cm^?2 and 47.4±0.3 s^?1. The sensitivity, linear concentration range and detection limit of the biosensor for glucose detection were 38.57 µA mM^?1 cm^?2, 25 µM to 8 mM and 6.5 µM, respectively. This biosensor also exhibits good stability, reproducibility and long life time. These indicate Si₃N₄ nanoparticles is good candidate material for construction of third generation biosensor and bioelectronics devices.     

Extraction of small amounts of dialkylphosphorodithioates with tetraphenylarsonium

The extraction behaviour of ion-pairs formed by dialkylphosphorodithioates with tetraphenylarsonium cation was examined for the dichloromethane—water system. The mole ratio method, with spectrophotometric and conductimetric measurements of the organic phase, showed the mole ratio of the ion-pair to be 1:1. Dissociation of the ion-pairs occurred at concentrations in the aqueous phase lower than 10^?1 mol dm^?3 for the dimethyl compound and 6 × 10^?4 mol dm^?3 for the diethyl analogue. Under favourable experimental conditions, dialkylphosphorodithioates can be collected from aqueous solutions at concentrations not exceeding 1 μg cm^?3 (ca. 5 × 10^?6 mol dm^?3), with extraction efficiencies of 86–95%. Dialkylphosphorothioates are extracted much less efficiently; diethylphosphate and inorganic phosphate are not extracted.     

Determination of pesticides in vegetable samples using an acetylcholinesterase biosensor based on nanoparticles ZrO2/chitosan composite film

An amperometric pesticides inhibition biosensor has been developed and used for determination of pesticides in vegetable samples. To eliminate the interference of ascorbic acid, multilayer films of polyelectrolyte (chitosan/polystyrensulfonate) were coated on the glass carbon electrode. Then, acetylcholinesterase was immobilized on the electrode based on surface-treated nanoporous ZrO₂/chitosan composite film as immobilization matrix. As a modified substrate, acetylthiocholine was hydrolysed by acetylcholinesterase and produced thiocholine which can be oxidized at +700?mV vs. SCE. Pesticides inhibit the activity of enzyme with an effect of decreasing of oxidation current. The experimental conditions were optimized. The electrode has a linear response to acetylthiocholine within 9.90?×?10^?6 to 2.03?×?10^?3?M. The electrode provided a linear response over a concentration range of 6.6?×?10^?6 to 4.4?×?10^?4?M for phoxim with a detection limit of 1.3?×?10^?6?M, over a range of 1.0?×?10^?8 to 5.9?×?10^?7?M for malathion, and over a range of 8.6?×?10^?6 to 5.2?×?10^?4?M for dimethoate. This biosensor has been used to determine pesticides in a real vegetable sample.