Aptamer‐based detection and quantitative analysis of human immunoglobulin E in capillary electrophoresis with chemiluminescence detection

A novel aptamer‐based CE with chemiluminescence (CL) assay was developed for highly sensitive detection of human immunoglobulin E (IgE). The IgE aptamer was conjugated with gold nanoparticles (AuNPs) to form AuNPs‐aptamer that could specifically recognize the IgE to produce an AuNPs‐aptamer‐IgE complex. The mixture of the AuNPs‐aptamer‐IgE complex and the unbounded AuNPs‐aptamer could be effectively separated by CE and sensitively detected with luminol‐H₂O₂ CL system. By taking the advantage of the excellent catalytic behavior of AuNPs on luminol‐H₂O₂ CL system, the ultrasensitive detection of IgE was achieved. The detection limit of IgE is 7.6 fM (S/N = 3) with a linear range from 0.025 to 250 pM. Successful detection of IgE in human serum samples was demonstrated and the recoveries of 94.9–103.2% were obtained. The excellent assay features of the developed approach are its specificity, sensitivity, adaptability, and very small sample consumption. Our design provides a methodology model for determination of rare proteins in biological samples.     

A Sandwich‐type Electrochemiluminescence Aptasensor for Thrombin Based on Functional Co‐polymer Electrode Using Ru(bpy)32+ Doped Nanocomposites as Signal‐amplifying Tags

Herein, a signal‐on sandwich‐type electrochemiluminescence (ECL) aptasensor for the detection of thrombin (TB) was proposed. The graphene (GR) doped thionine (TH) was electropolymerized synchronously on the bare glassy carbon electrode (GCE) to form co‐polymer (PTG) electrode. The gold nanoparticles (AuNPs) were decorated on the surface of the PTG by in‐situ electrodeposition, and the functional co‐polymer (PTG‐AuNPs) electrode was utilized as sensing interface. Then, TB binding aptamer I (TBA I) as capture probes were modified on the PTG‐AuNPs electrode to capture TB, and Ru(bpy)₃²⁺/silver nanoparticles doped silica core‐shell nanocomposites‐labeled TB binding aptamer II (RuAg/SiO₂NPs@TBA II) were used as signal probes to further bind TB, resulting in a sandwich structure. With the assistant of silica shell and AgNPs, the enrichment and luminous efficiency of Ru(bpy)₃²⁺ were significantly improved. Under the synergy of PTG‐AuNPs and RuAg/SiO₂NPs, the ECL signal was dramatically increased. The proposed ECL aptasensor displayed a wide linear range from 2 fM to 2 pM with the detection limit of 1 fM, which is comparable or better than that in reported ECL aptasensors for TB using Ru(bpy)₃²⁺ and its derivatives as the luminescent substance. The excellent sensitivity makes the proposed aptasensor a promising potential in pharmaceutical and clinical analysis.     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

Aptamer‐Assisted Gold Nanoparticles/PEDOT Platform for Ultrasensitive Detection of LPS

Neatly arranged gold nanoparticles (AuNPs) were directly electrodeposited on an electrochemically polymerized self‐assembled monolayer (SAM) of thiol‐functionalized 3,4‐ethylenedioxythiophene (EDOT) derivative, EDTMSHA. A thiolated single‐stranded DNA (ssDNA) aptamer with high specificity to LPS was immobilized on the AuNPs/conducting polymer composite film, serving as sensing platform for LPS detection. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscope (SEM), and atomic force microscopy (AFM) were utilized to characterize the modification and detection processes. The electron transfer resistance was found to have a linear relationship with LPS concentration from 0.1 pg/mL to 1 ng/mL.     

Dual‐signal amplification strategy for ultrasensitive chemiluminescence detection of PDGF–BB in capillary electrophoresis

Many efforts have been made toward the achievement of high sensitivity in capillary electrophoresis coupled with chemiluminescence detection (CE‐CL). This work describes a novel dual‐signal amplification strategy for highly specific and ultrasensitive CL detection of human platelet‐derived growth factor–BB (PDGF–BB) using both aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (HRP–AuNPs–aptamer) as nanoprobes in CE. Both AuNPs and HRP in the nanoprobes could amplify the CL signals in the luminol–H₂O₂ CL system, owing to the excellent catalytic behavior of AuNPs and HRP in the CL system. Meanwhile, the high affinity of aptamer modified on the AuNPs allows detection with high specificity. As proof‐of‐concept, the proposed method was employed to quantify the concentration of PDGF–BB from 0.50 to 250 fm with a detection limit of 0.21 fm. The applicability of the assay was further demonstrated in the analysis of PDGF–BB in human serum samples with acceptable accuracy and reliability. The result of this study exhibits distinct advantages, such as high sensitivity, good specificity, simplicity, and very small sample consumption. The good performances of the proposed strategy provide a powerful avenue for ultrasensitive detection of rare proteins in biological sample, showing great promise in biochemical analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Reduced Graphene Oxide/Carbon Nanotube/Gold Nanoparticles Nanocomposite Functionalized Screen‐Printed Electrode for Sensitive Electrochemical Detection of Endocrine Disruptor Bisphenol A

We fabricated a highly sensitive electrochemical sensor for the determination of bisphenol A (BPA) in aqueous solution by using reduced graphene oxide (RGO), carbon nanotubes (CNT), and gold nanoparticles (AuNPs)‐modified screen‐printed electrode (SPE). GO/CNT nanocomposite was directly reduced to RGO/CNT on SPE at room temperature. AuNPs were then electrochemically deposited in situ on RGO/CNT‐modified SPE. Under optimized conditions, differential pulse voltammetry (DPV) produced linear current responses for BPA concentrations of 1.45 to 20 and 20 to 1,490 nM, with a calculated detection limit of an ultralow 800 pM. The sensor response was unaffected by the presence of interferents such as phenol, p‐nitrophenol, pyrocatechol, 2,4‐dinitrophenol, and hydroquinone.     

A Novel L‐Cysteine Electrochemical Sensor Using Sulfonated Graphene‐poly(3,4‐Ethylenedioxythiophene) Composite Film Decorated with Gold Nanoparticles

By exploiting the electrostatic interaction between positively charged 3,4‐ethylenedioxythiophene cation radicals and negatively charged sulfonated graphene (SG) sheets, we prepared a poly(3,4‐ethylenedioxythiophene)‐sulfonated graphene (SG‐PEDOT) composite film by a one‐step electrochemical process. The composite was further decorated with gold nanoparticles (AuNPs) and employed as an electrode material for the detection of L ‐cysteine (Cys). The SG‐PEDOT composite film is shown to provide a rough surface for the electrodeposition of AuNPs and to improve substrate accessibility and interaction with Cys. Moreover, the AuNPs‐decorated composite exhibits better electrocatalytic performance than that of a SG‐PEDOT composite only. Under optimum experimental conditions, the amperometric current of the sensor is linearly related to the concentration of Cys in the 0.1 to 382 µM range, and the detection limit is 0.02 µM (at S/N=3). The modified electrode displays favorable selectivity, good stability and high reproducibility. The method was successfully applied to the detection of Cys in spiked human urine.     

A highly selective and sensitive cocaine aptasensor based on covalent attachment of the aptamer-functionalized AuNPs onto nanocomposite as the support platform

Based on the conformational changes of the aptamer-functionalized gold nanoparticles (AuNPs) onto MWCNTs/IL/Chit nanocomposite as the support platform, we have developed a sensitive and selective electrochemical aptasensor for the detection of cocaine. The 5′-amine-3′-AuNP terminated aptamer is covalently attached to a MWCNTs/IL/Chit nanocomposite. The interaction of cocaine with the aptamer functionalized AuNP caused the aptamer to be folded and the AuNPs with negative charge at the end of the aptamer came to the near of electrode surface therefore, the electron transfer between ferricyanide (K₃Fe(CN)₆) as redox probe and electrode surface was inhibited. A decreased current of (K₃Fe(CN)₆) was monitored by differential pulse voltammetry technique. In an optimized condition the calibration curve for cocaine concentration was linear up to 11 μM with detection limit (signal-to-noise ratio of 3) of 100 pM. To test the selectivity of the prepared aptasensor sensing platform applicability, some analgesic drugs as the interferes were examined. The potential of the aptasensor was successfully applied for measuring cocaine concentration in human blood serum. Based on our experiments it can be said that the present method is absolutely beneficial in developing other electrochemical aptasensor.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

Ultrasensitive SERS Detection of Lysozyme by a Target‐Triggering Multiple Cycle Amplification Strategy Based on a Gold Substrate

An ultrasensitive surface enhanced Raman scattering (SERS) method has been designed to selectively and sensitively detect lysozyme. The gold chip as the detection substrate, the aptamer‐based target‐triggering cascade multiple cycle amplification, and gold nanoparticles (AuNPs) bio‐barcode Raman probe enhancement on the gold substrate are employed to enhance the SERS signals. The cascade amplification process consists of the nicking enzyme signaling amplification (NESA), the strand displacement amplification (SDA), and the circular‐hairpin‐assisted exponential amplification reaction (HA‐EXPAR). With the involvement of an aptamer‐based probe, two amplification reaction templates, and a Raman probe, the whole circle amplification process is triggered by the target recognition of lysozyme. The products of the upstream cycle (NESA) could act as the “DNA trigger” of the downstream cycle (SDA and circular HA‐EXPAR) to generate further signal amplification, resulting in the immobility of abundant AuNPs Raman probes on the gold substrate. “Hot spots” are produced between the Raman probe and the gold film, leading to significant SERS enhancement. This detection method exhibits excellent specificity and sensitivity towards lysozyme with a detection limit of 1.0×10^?15 M . Moreover, the practical determination of lysozyme in human serum demonstrates the feasibility of this SERS approach in the analysis of a variety of biological specimens.     

Ultrasensitive aptamer-based on-off assay for lysozyme using a glassy carbon electrode modified with gold nanoparticles and electrochemically reduced graphene oxide

The authors describe an electrochemical aptamer based assay for the determination of the serine protease lysozyme in very low (pM) concentrations. The method is based on the formation of a complex between anti-lysozyme aptamer fragments and lysozyme, and on electrochemical detection by differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). The surface of a glassy carbon electrode was modified with a nanocomposite consisting of gold nanoparticles and electrochemically reduced graphene oxide nanosheets (AuNPs/erGO), and the thiolated aptamer was then linked to the AuNPs by self-assembly through Au-S bonds. The interaction of immobilized aptamers with lysozyme leads to the decreased peak current in DPV and increased charge transfer resistance (R_ct) in EIS when using hexacyanoferrate or Methylene Blue as a redox probe. The calibration plot, when applying EIS and working at a typical voltage of ?0.22 V (vs. SCE), is linear over 1.0 to 104.3 pM concentration range, with a detection limit of 0.06 pM (at a signal-to-noise ratio of 3). The respective data for DPV are a 9.6–205.5 pM linear range with a detection limit of 0.24 pM. Depending on the redox marker applied, the method works in the “signal-off” or “signal-on” mode in DPV and EIS protocols, respectively. The sensing interface is high specific for lysozyme and not affected by other proteins. The method was applied to the determination of lysozyme in spiked diluted human serum, and the results agreed well with data obtained with a standard ELISA.

Open image in new window

Graphical abstract The surface of a glassy carbon electrode was modified with a nanocomposite consisting of gold nanoparticles and electrochemically reduced graphene oxide nanosheets (AuNPs/erGO). Then, the thiolated aptamer was linked to the AuNPs by self-assembly through Au-S bonds. The modified electrode was applied to the determination of lysozyme with “signal off” and “signal on” strategies.

     

A bifunctional electrochemical aptasensor based on AuNPs-coated ERGO nanosheets for sensitive detection of adenosine and thrombin

A simple and sensitive bifunctional electrochemical aptasensor for detection of adenosine and thrombin has been developed using gold nanoparticles–electrochemically reduced graphene oxide (AuNPs-ERGO) composite film-modified electrode. Firstly, the reduced graphene oxide film and AuNPs were sequentially immobilized on glassy carbon electrode (GCE) surface. Secondly, thrombin aptamer was immobilized on the modified electrode. Finally, adenosine aptamer was hybridized with it to serve as a recognition element and methylene blue (MB) as electrochemical signal indicator. In the presence of adenosine or thrombin, the sensor recognized it and a conformational change was induced in aptamer, resulting in decrease of the peak current of MB. The linear relation between concentration of adenosine or thrombin and peak current of MB allowed quantification of them. Thanks to the special electronic characteristic of AuNPs-ERGO composite film, sensitivity of sensor was greatly improved. Under optimal conditions, the proposed aptasensor presented an excellent performance in a linear range of 25 nM to 750 nM for adenosine and 0.5 nM to 10 nM for thrombin. Detection limits were estimated to be 8.3 nM for adenosine and 0.17 nM for thrombin, respectively. Moreover, dual-analyte detection of adenosine and thrombin was achieved without potentially increasing the complexity and cost of the assay.

     

Aptamer-based highly sensitive electrochemical detection of thrombin via the amplification of graphene

Herein, we successfully fabricated a highly sensitive label-free electrochemical aptasensor for thrombin based on the amplification of graphene (Gra). The excellent electrochemical probe of nickel hexacyanoferrate nanoparticles (NiHCFNPs) was introduced to form Nafion-Graphene-NiHCFNPs (Nf-Gra-NiHCFNPs) nanocomposites membrane on the gold electrode. The employment of graphene not only enhanced the surface area of the electrode with increased NiHCFNPs immobilization, but also improved the conductivity of the electrode, which further effectively improved the sensitivity of this proposed aptasensor. Subsequently, AuNPs layer was formed to immobilize the thrombin aptamer (TBA) and enhance the stability of the composite monolayer mentioned above. Then, thiol-modified TBA was assembled onto the AuNPs layer. Thereafter, hexanethiol (HT) was employed to block the possible remaining active sites. With the dual amplification of Gra and AuNPs, the resulting aptasensor exhibited good current response to target thrombin with a wide linear range extended from 1 pM to 80 nM (the detection limit was 0.3 pM). Additionally, the morphologies of bare Au substrate, nickel hexacyanoferrate nanoparticles (NiHCFNPs) and nanocomposites were successfully characterized by atomic force microscopy (AFM).     

Electrochemical Aptasensor Based on ZnO Modified Gold Electrode

We developed an electrochemical thrombin aptasensor based on ZnO nanorods functionalized by electrostatically adsorption of 30‐mer DNA aptamers. The sensor surface was characterized by AFM and SEM. The surface layer assembling was optimized using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with ferricyanide ions as redox markers. The peak current of the ferricyanide and the charge transfer resistance gradually decreased with increasing concentration of thrombin in the range from 3 pM to 100 nM due to formation of aptamer‐thrombin complexes and slower diffusion of the marker ions through the surface layer. At optimal conditions, a limit of detection (LOD) of 3 pM for EIS measurements and 10 pM for CV response was calculated from the S/N=3.     

基于铈配合物信号探针的凝血酶电化学适体传感器

以Ce³⁺为中心离子，N，N-二甲基甲酰胺（DMF）为有机配体，通过温度调节，合成系列形貌和电化学信号不同的铈配合物（Ce-COPs）。筛选出电化学信号最强的多面体状Ce-COP为信号探针。通过凝血酶（TB）与TB适体链之间的特异性识别作用，设计了一种简单通用的TB适体传感器。最优实验条件下，该传感器对TB的线性响应范围为1.0 fmol·L^-1~1.0 nmol·L^-1，检测限为0.94 fmol·L^-1。此外，本方案方法与商品人凝血酶（TM） ELISA试剂盒检测结果相近。结果表明，构建的传感器具有良好的灵敏度、特异性、选择性和稳定性。     

基于铈配合物信号探针的凝血酶电化学适体传感器

以Ce³⁺为中心离子,N,N-二甲基甲酰胺(DMF)为有机配体,通过温度调节,合成系列形貌和电化学信号不同的铈配合物(Ce-COPs)。筛选出电化学信号最强的多面体状Ce-COP为信号探针。通过凝血酶(TB)与TB适体链之间的特异性识别作用,设计了一种简单通用的TB适体传感器。最优实验条件下,该传感器对TB的线性响应范围为1.0 fmol·L^-1~1.0 nmol·L^-1,检测限为0.94 fmol·L^-1。此外,本方案方法与商品人凝血酶(TM) ELISA试剂盒检测结果相近。结果表明,我们构建的TB适体传感器具有良好的灵敏度、特异性、选择性和稳定性。     

Development of Electrochemical Impedance Spectroscopy Based Malaria Aptasensor Using HRP‐II as Target Biomarker

Current demand for a stable, low cost and sensitive malaria sensor has prompted to explore novel recognition systems that can substitute widely used protein based labile biorecognition elements to be used in point of care diagnostic devices. Here, we report a novel ssDNA aptamer of 90 mer sequence developed by SELEX process against HRP‐II, a specific biomarker for Plasmodium falciparum strains. High stability of the secondary structure of the isolated aptamer was discerned from its free energy of folding of −20.40 kcal mole⁻¹. The binding constant (K_d) of the aptamer with HRP‐II analysed by isothermal titration calorimetry was ∼1.32 μM. Circular dichroism studies indicated B form of the aptamer DNA. The aptamer was chemically immobilized on a gold electrode surface through a self‐assembled monolayer of dithio‐bis(succinimidyl) propionate to produce the aptasensor. The step wise modification of the layers over the gold electrode during fabrication of the aptasensor was confirmed by cyclic voltammetry. The aptasensor was then challenged with different concentration of HRP‐II and analysed the interaction signals through electrochemical impedance spectroscopy. The impedance signal behaved reciprocally with the increasing concentrations of the target in the sample from which a dynamic range of 1 pM–500 pM (R²=0.99) and LOD of ∼3.15 pM were discerned. The applicability of the developed aptasensor to detect HRP‐II in mimicked real sample was also validated.     

Aptamer enzymatic cleavage protection assay for the gold nanoparticle-based colorimetric sensing of small molecules

A label-free, homogeneous aptamer-based sensor strategy was designed for the facile colorimetric detection of small target molecules. The format relied on the target-induced protection of DNA aptamer from the enzymatic digestion and its transduction into a detectable signal through the length-dependent adsorption of single-stranded DNA onto unmodified gold nanoparticles (AuNPs). The proof-of-principle of the approach was established by employing the anti-tyrosinamide aptamer as a model functional nucleic acid. In the absence of target, the aptamer was cleaved by the phosphodiesterase I enzymatic probe, leading to the release of mononucleotides and short DNA fragments. These governed effective electrostatic stabilization of AuNPs so that the nanoparticles remained dispersed and red-colored upon salt addition. Upon tyrosinamide binding, the enzymatic cleavage was impeded, resulting in the protection of the aptamer structure. As this long DNA molecule was unable to electrostatically stabilize AuNPs, the resulting colloidal solution turned blue after salt addition due to the formation of nanoparticle aggregates. The quantitative determination of the target can be achieved by monitoring the ratio of absorbance at 650 and 520 nm of the gold colloidal solution. A limit of detection of ∼5 μM and a linear range up to 100 μM were obtained. The sensing platform was further applied, through the same experimental protocol, to the adenosine detection by using its DNA aptamer as recognition tool. This strategy could extend the potentialities, in terms of both simplicity and general applicability, of the aptamer-based sensing approaches.     

3,4‐Dihydroxy‐L‐phenylalanine for Preparation of Gold Nanoparticles and as Electron Transfer Promoter in H2O2 Biosensor

3,4‐Dihydroxy‐L ‐phenylalanine (dopa) and 2‐(3,4‐dihydroxyphenyl)ethylamine (dopamine) were investigated as reducing agent and stabilizer for synthesis of gold nanoparticles (AuNPs) by one‐pot heating of a solution of HAuCl₄/dopa or dopamine. AuNPs with different sizes were obtained by controlling the mass ratios of HAuCl₄/dopa or dopamine. The formation mechanism for AuNPs was also proposed. Immobilization of horseradish peroxidase (HRP) and promotion of its electron transfer by polydopa film were investigated for preparation of H₂O₂ biosensor. Alkaline dopa solution was dropped onto a gold electrode for the formation of polydopa film. HRP was immobilized on the polydopa film through interactions between heme centre of HRP and the amine and carboxyl groups in polydopa. The AuNPs embedded in the polydopa film improved the electron transfer efficiency. These two factors allowed successful development of a H₂O₂ sensor with HRP@polydopa‐AuNPs electrode. Due to its biocompatibility, the polydopa‐AuNPs film provided good retention of enzyme activity and long‐term stability of the sensor. A rapid catalytic response (3 s) and a linear range from 0.006 to 5.0 mmol L^?1 were obtained for H₂O₂. This facile preparation strategy can be extended to other enzyme‐based biosensors.     

Simultaneous Determination of Ascorbic Acid,Dopamine and Uric Acid Based on Gold Nanoparticles‐PTCA‐Cys Composites Modified Electrodes

In this study, a nanocomposite of 3, 4, 9, 10‐perylenetetracarboxylic acid and L‐cysteine (PTCA‐Cys) with satisfactory water‐solubility and film‐forming ability was prepared and worked as substrate for modifying the glassy carbon electrode. Then, gold nanoparticles (AuNPs) were immobilized to achieve a PTCA‐Cys‐AuNPs modified electrode which provided more reaction positions on the sensor. Scanning electron microscopy, transmission electron microscopy, cyclic voltammetry and different pulse voltammetry were employed to characterize the assembly process of the sensor. The constructed sensor displayed desirable sensitivity, selectivity and stability towards the simultaneous detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Under the optimal experimental conditions, the oxidation peaks of AA, DA and UA appeared at 64, 240 and 376 mV, respectively. The corresponding linear response ranges were 3.2–435, 0.04–100 and 0.80–297 μM, and the detection limits were 1.1, 0.010 and 0.27 μM (S/N=3), respectively.