Chromium imine and amine complexes as homogeneous catalysts for the trimerisation and polymerisation of ethylene

Cr(III) complexes of tridendate imine and amine ligands with N, P, O, S donor atoms 1 and 2 have been prepared and tested as catalysts in the oligomerisation and polymerisation of ethylene giving excellent selectivity towards 1-hexene and polymerisation to polyethylene when activated with cocatalysts. X-ray structure analyses of the precatalysts 1a-c, 1i, and 2b are investigated. The metal-ligand binding in 1a and 1b is nearly the same, which leads to similar catalytic activities of these precatalysts.     

Alkylaminophosphanyl substituted half-sandwich complexes of vanadium(III) and chromium(III): preparation and reactivity in ethylene polymerisation

[Cp^R(RPNEt₂)]M (Cp^R=t-BuC₅H₃, C₅(CH₃)₄, indenyl, fluorenyl; M=Li, K) smoothly react with VCl₃(Me₃P)₂ and CrCl₃(THF)₃ systems giving paramagnetic complexes [Cp^R(R¹PNEt₂)]MCl₂ (M=V(Me₃P)₂, Cr). After reaction with MAO these complexes are active in the polymerisation of ethylene yielding highly crystalline, high-density products of high molecular weight (M_w ranging from 100 000 to 4.5×10⁶ g mol⁻¹, 20≤T_p≤100 °C). Polymerisation with chromium complexes leads to the formation of polyethylenes with broad molecular weight distribution.     

Reduction of chromium in ethylene polymerisation using bis(imido)chromium(VI) catalyst precursors

Hybrid density functional calculations on [Cr(NR)2C3H7(C2H4)]+ (R = H, tBu) have revealed a facile reductive elimination reaction involving beta-hydrogen transfer from the alkyl chain, suggesting that the active species in ethylene polymerisation with bis(imido)chromium(VI) precursors contains a reduced chromium atom.     

Triamidoamine complexes of chromium(III) and chromium(IV)

Treatment of [CrCl3(THF)3] with slightly more than 1 equiv of Li3(N3N) [(N3N)(3-) = ((Me3SiNCH2CH2)3N)(3-)] affords the triamidoamine complex [Cr(N3N)] (1) in 75% yield. 1 is oxidized by PhICl2, CuCl2, or AgCl to give the chromium(IV) complex [Cr(N3N)Cl] (2) in moderate yields. Alternatively, complex 2 is obtained directly from [CrCl3(THF)3] in 50% yield after treatment with 0.5 equiv of Li3(N3N). Both compounds are high-spin complexes bearing three and two unpaired electrons, respectively. Their molecular structures are described revealing a trigonal monopyramidal and trigonal bipyramidal coordination geometry of the chromium center, respectively.     

Tris(pyrazolyl)methane–chromium(III) complexes as highly active catalysts for ethylene polymerization

Reaction of complex CrCl₃(THF)₃ with the tris(pyrazolyl)methane ligands, HC(Pz)₃, HC(3,5-Me₂Pz)₃ and their substituted derivatives RC(Pz)₃ (R = Me, CH₂OH, CH₂OSO₂Me) in THF lead to the formation of neutral complexes of the types [RC(Pz)₃CrCl₃] and [RC(3,5-Me₂Pz)₃CrCl₃]. After reaction with methylalumoxane (MAO) these complexes are active in the polymerization of ethylene. The substituent on the methane central carbon atom of the ligand has some influence in polymerization behavior. This compounds present higher activities than similar chromium complexes, in the ethylene polymerization reaction.     

Bifunctional yttrium(III) and titanium(IV) NHC catalysts for lactide polymerisation

Lewis acidic yttrium(III) and titanium(IV) derivatives of anionic, metal-tethered carbenes apparently act as bifunctional catalysts for the polymerisation of D,L-lactide, using a combination of Lewis acid and base functionalities to initiate ring opening of the cyclic monomer; the alcohol- and amino-functionalised carbenes from which they derive provide models for the first insertion step, and also display metal-free polymerisation catalysis to generate polylactic acid.     

Chromium(III) complexes bearing bis(benzotriazolyl)pyridine ligands: synthesis,characterization and ethylene polymerization behavior

Reaction of benzotriazole with 2,6-bis(bromomethyl)pyridine and 2,6-pyridinedicarbonyl dichloride yields the tridentate ligands 2,6-bis(benzotriazol-1-ylmethyl)pyridine (1) and 2,6-bis(benzotriazol-1-ylcarbonyl) pyridine (2). The molecular structures of the ligands were determined by single-crystal X-ray diffraction. These ligands react with CrCl₃(THF)₃ in THF to form neutral complexes, [CrCl₃{2,6-bis(benzotriazolyl)pyridine-N,N,N}] (3, 4), which are isolated in high yields as air stable green solids and characterized by mass spectra (ESI), FTIR spectroscopy, UV–Visible, thermogravimetric analysis (TGA), and magnetic measurements. After reaction with methylaluminoxane (MAO), the chromium(III) complexes are active in the polymerization of ethylene showing a bimodal molecular weight distribution. A DFT computational investigation of the polymerization reaction mechanism shows that the most likely reaction pathway originates from the mer configuration when the spacer is CH₂ (complex 3) and from the fac configuration when the spacer is CO (complex 4).     

Synthesis, structure and reactivity of new yttrium bis(dimethylsilyl)amido and bis(trimethylsilyl)methyl complexes of a tetradentate bis(phenoxide) ligand

The reactions of a bulky amino-methoxy bis(phenolate) ligand H₂L with Y(CH₂SiMe₃)₃(THF)₂ and Y[N(SiHMe₂)₂]₃(THF)₂ under mild condition leads to the selective formation of the thermally stable complexes [L]Y(CH₂SiMe₃)(THF) (1) and [L]Y[N(SiHMe₂)₂](THF) (2). The X-ray structures revealed very similar binding of the [ONOO] ligand core to the metal for both complexes, which feature an octahedral geometry involving coordination of the methoxy side-arm of the ligand and of a remaining THF molecule. ¹H-NMR spectroscopy indicates that the solid state structure of 1 and 2 is retained in hydrocarbon solutions with THF coordinated to yttrium. Alkyl complex 1 showed no activity in ethylene polymerization, presumably due to the presence of coordinated THF. The amido complex 2 catalyzed sluggishly the polymerization of methyl methacrylate to give isotactic-rich PMMA but is very active for the ring-opening polymerization of ε-caprolactone.     

Binuclear half-metallocene chromium(III) complexes mediated ethylene polymerization with alkylaluminium as cocatalyst

Binuclear half-metallocene chromium complexes {Cp*[3-(CH==NR)-2-O-C(10)H(5)]CrCl}(2) [Cp* = C(5)Me(5); R = (i)Pr (1), Ph (2), 2,6-(i)Pr(2)C(6)H(3) (3)] based on 1,1'-binaphthyl ligands, as well as their mononuclear analogues Cp*[3-(CH==NR)-2'-R'-2-O-C(20)H(11)]CrCl [R = (i)Pr, R' = (n)BuO (4), R = Ph, R' = (n)BuO (5), R = 2,6-(i)Pr(2)C(6)H(3), R' = (n)BuO (6), R = (i)Pr, R' = H (7)], were synthesized and characterized by mass spectrometry, elemental analysis, magnetic measurement, and UV-vis spectroscopy. The molecular structures of complexes 1, 3, 5 and 6 were further confirmed by single-crystal X-ray crystallographic analysis. When activated with a small amount of AlMe(3), these binuclear complexes exhibited higher activities in catalyzing ethylene polymerization in comparison with their mononuclear analogues, affording high molecular weight polymers with unimodal molecular weight distributions. The highest activity up to 2.87 × 10(6) g PE (mol Cr)(-1) h(-1) was achieved in the catalyst system of complex 3 bearing a bulky 2,6-(i)Pr(2)C(6)H(3) group on the imine nitrogen atom in the presence of 25 equiv. AlMe(3) as activator at 20 °C. (13)C NMR analysis indicates the resultant polymers are linear and no evidence on branch was found.     

Tris(bis(trimethylsilyl)amido)samarium: X-ray structure and DFT study

The compound Sm[N(SiMe(3))(2)](3) has been investigated experimentally by X-ray crystallography and computationally by DFT methods. The structure is analogous to that of other tris[bis(trimethylsilyl)amido]lanthanides, featuring positional disorder of the metal atom above and below the plane defined by the three N donor atoms, resulting in a trigonal pyramidal configuration. One of the methyl groups of each amido ligand is placed above the apex of the pyramid at close distance to the metal center suggesting the presence of agostic interactions. The DFT calculations have been carried out on the real molecule and on a Si[N(SiH(3))(SiH(2)Me)](3) model where the unique Me group was placed above the apex of the pyramid to probe the agostic interaction. In both cases, the optimized geometry reproduces very well the experimental structure and indicates the presence of beta-Si-C agostic interactions. A comparison of the optimized geometries obtained in the presence/absence of the Sm d and the Si d orbitals serves to illustrate the relevance of these orbitals for (i). the establishment of the pyramidal configuration at Sm, (ii). the Sm-N bond length, and (iii). the Sm-(beta-Si-C) bond length. The bonding analysis, which was carried out by both Mulliken and NBO methods, not only confirms the importance of the metal d orbitals for the Sm-N and Sm-(beta-Si-C) chemical bonding but also illustrates the relevance of electrostatic terms in the agostic interaction. Sm-N and N-Si pi bonding is present according to the bonding analysis but is not important for enforcing the planar configuration at N, nor the pyramidal configuration at Sm.     

Bis(pyrazolyl)pyridine vanadium(III) complexes as highly active ethylene polymerization catalysts

The synthesis, characterization and catalytic activity in ethylene polymerization of novel mononuclear vanadium complexes bearing N^∧N^∧N-tridentate (pyrazolyl-pyridine) ligands are described. With AlEtCl₂ as co-catalyst, complexes 1 and 2 produce single-site catalysts that polymerized ethylene affording high density polyethylene with fairly narrow molecular weight distribution.     

Chromium(III) and Chromium(IV) Tetraphenylporphine Complexes

Stable chromium complex (AcO)CrTPP was synthesized through the reaction of meso-tetraphenylporphine with chromium(III) acetate in boiling phenol. Coordination properties of chromium porphyrin in reaction with imidazole and pyridine in o-xylene were studied by electronic absorption spectroscopy and computer modeling. A single-electron oxidation of chromium(III) complex was found to be affected by peroxide compounds. The stability of an extra complex depends on the basic properties of the extra ligand and oxidation number of the central metal atom. The complex stability correlates with the calculated energy of formation of the metal–extra ligand bond. The geometrical structure and energy parameters of hexacoordinated chromium porphyrins were calculated using the quantum-chemical method. The effect of the cis and trans position of ligands in the composition of a macrocyclic compound was established to be significant only in the extra complexes (AcO)CrTPP.     

Pyridine bis(imine) cobalt or iron complexes for ethylene and 1-hexene (co)polymerisation

Brookhart and Gibson have recently described the synthesis of new iron and cobalt complexes with pyridine bis(imine) ligands for the polymerisation of ethylene and propylene. In the present paper, the synthesis of new complexes modified with heteroatoms, based on the above-mentioned catalysts, is reported. Higher activities are observed. The influence of the polymerisation temperature on the catalytic activity has been investigated. The first example of the successful copolymerisation of ethylene and 1-hexene with these catalysts is also discussed. The (co)polymers have been characterized by high temperature ¹³C NMR. To cite this article: R. Souane et al., C. R. Chimie 5 (2002) 43–48     

Chromium(III) and oxovanadium (IV) complexes of some urea derivatives

Summary The preparation of eight new complexes of Cr^III and VO^IV with urea derivatives is reported here. The ligands used were 2-imidazolidinone (ethyleneurea, EU),N,N'-dimethyl-2-imidazolidinone (N,N -dimethylethyleneurea, DMEU), 2-imidazolidinethione (ethylenethiourea, ETU), andN, N, N, N -tetramethyl-2-imidazolidone (tetramethylurea, TMU). The previously reported complex VOCl₂(TMU)₂ was also prepared. All nine complexes were investigated with regard to conductimetry as well as visible and i.r. spectroscopy. All carbonyl-containing complexes exhibit a metal-oxygen bond, whereas in ETU complexes a metal-nitrogen bond seems to be favoured.     

The nature of the active species in bis(imino)pyridyl cobalt ethylene polymerisation catalysts

Studies on cobalt ethylene polymerisation catalysts bearing bis(imino)pyridine ligands strongly indicate that the activated species is not the anticipated cobalt(II) alkyl cation.     

Supported bis(indenyl)– and bis(fluorenyl)–chromium catalysts for ethylene polymerization

Silica-supported bis(indenyl)– and bis(fluorenyl)–chromium catalysts show good activity in ethylene polymerization. For maximum productivity with the indenyl chromium catalyst, the silica must be dried, with higher dehydration temperatures giving a significant increase in polymerization activity. Less deactivation on thermal aging of the supported bis(indenyl)–chromium catalyst allows ethylene polymerization to proceed for many hours, which provides polyethylenes of low residual chromium content. In contrast to the behavior of supported chromocene catalysts, the indenyl–and fluorenyl–chromium catalysts require a higher hydrogen/ethylene ratio to achieve a specific polymer melt index. Nevertheless, highly saturated polyethylenes are produced with these new catalysts. This result indicates that chain transfer to hydrogen remains the major chain transfer reaction. Addition of cyclopentadiene to a supported indenyl–chromium catalyst provided a catalyst with a much higher transfer response to hydrogen. This result suggests that ligand exchange occurred, producing a supported chromocene catalyst. These overall results are consistent with an active-site model which comprises a supported divalent chromium center attached to an indenyl or fluorenyl ligand during the polymerization process. Polymerization is believed to occur by a coordinated anionic mechanism of the type previously discussed for a supported chromocene catalyst.     

Kinetics of cerium(IV) oxidation of macrocyclic complexes of chromium(III) and fate of chromium(IV) intermediates

Kinetics and mechanism of the cerium(IV) oxidation of Cr(III) complexes of a series of macrocyclic (or pseudomacrocyclic) ligands with [14]-membered intraligand ring-sizes have now been investigated at I = 1.0 M (LiClO₄) Temp. 30°C. The complexes of the formulation Cr(macrocycle)(X)(H₂O) where X = CHCl₂ and H₂O, n = 0 or 1 undergo oxidation to Cr(VI) with the formation of chromium(IV) intermediates. The observed kinetic parameters for the Ce(IV) oxidation of Cr(III) macrocyclic complexes have been discussed in terms of changes brought about by the macrocyclic ligands on the Cr(III)—Cr(IV) redox potentials and in specific rates for Cr(IV)—Cr(V) conversion. On the basis of this study, it has been suggested that the trapping of Cr(IV) is easier when a macrocyclic ligand having a symmetrical intra-ligand ring size and unsaturation in the cyclic structure is coordinated equatorially. Cyclic voltammetric studies indicate the formation of Cr(IV) transient in the case of electrochemical oxidation of trans-Cr(Me₄[14]tetraene)(H₂O).