Lineshapes in carbon 1s photoelectron spectra of methanol clusters

A general protocol for theoretical modeling of inner-shell photoelectron spectra of molecular clusters is presented and applied to C1s spectra of oligomers and medium-sized clusters of methanol. The protocol employs molecular dynamics for obtaining cluster geometries and a polarizable force field for computing site-specific chemical shifts in ionization energy and linewidth. Comparisons to spectra computed from first-principle theories are used to establish the accuracy of the proposed force field approach. The model is used to analyze the C1s photoelectron spectrum of medium-sized clusters in terms of surface and bulk contributions. By treating the surface-to-bulk ratio as an adjustable parameter, satisfactory fits are obtained to experimental C1s spectra of a beam of methanol clusters.     

What can C1s photoelectron spectroscopy tell about structure and bonding in clusters of methanol and methyl chloride?

Single-component clusters of methanol and methyl chloride have been produced by adiabatic expansion, and their carbon 1s photoelectron spectra were recorded using synchrotron radiation and a high-resolution electron analyzer. The experimental spectra are interpreted by means of theoretical models based on molecular dynamics simulations. The data are used to explore to what extent core-level photoelectron spectra may provide information on the bonding mechanism and the geometric structure of clusters of polar molecules. The results indicate that the cluster-to-monomer shift in ionization energy and also the width of the cluster peak may be used to distinguish between hydrogen bonding and weaker electrostatic interactions. Moreover, the larger width of the cluster peak in methanol clusters as compared to methyl chloride clusters is partly due to the structured surface of methanol clusters. Theoretical modeling greatly facilitates the analysis of core-level photoelectron spectra of molecular clusters.     

Localized versus delocalized excitations just above the 3d threshold in krypton clusters studied by Auger electron spectroscopy

We present Auger spectroscopy studies of large krypton clusters excited by soft x-ray photons with energies on and just above the 3d(52) ionization threshold. The deexcitation spectra contain new features as compared to the spectra measured both below and far above threshold. Possible origins of these extra features, which stay at constant kinetic energies, are discussed: (1) normal Auger process with a postcollision interaction induced energy shift, (2) recapture of photoelectrons into high Rydberg orbitals after Auger decay, and (3) excitation into the conduction band (or "internal" ionization) followed by Auger decay. The first two schemes are ruled out, hence internal ionization remains the most probable explanation.     

Structure of neutral nanosized clusters produced by coexpansion of CF4 and CH4

Mixed CH(4)/CF(4) clusters as well as pure clusters of CF(4) were produced by adiabatic expansion and studied by carbon 1s (C1s) X-ray photoelectron spectroscopy. Evidence is presented that CH(4) and CF(4) do indeed form binary clusters in CH(4)/CF(4) coexpansion experiments and that these clusters exhibit radial structure; i.e., CF(4) is primarily found in the bulk. The interpretation of the photoelectron spectra is supported by calculations of C1s ionization energies based on theoretical clusters models.     

The size of neutral free clusters as manifested in the relative bulk-to-surface intensity in core level photoelectron spectroscopy

A new approach for obtaining an estimate of the effective size of the free neutral clusters is proposed. The approach relies on an experimental measure of the surface and interior or "bulk" cluster atoms provided by the x-ray photoelectron spectroscopy and on a model for the attenuation of photoelectrons ejected from the bulk of the cluster as the result of the ionizing irradiation. The experimental part gives the ratio of the electron signal from the bulk cluster atoms to that from the cluster surface atoms for a wide range of cluster sizes and electron kinetic energies. The attenuated response of the bulk atoms is modeled using an exponential law with the cluster size and kinetic-energy-dependent electron escape depth as parameters. For the experimental size range, model-based calculations for Ar, Kr, and Xe clusters are presented. The cluster size estimates obtained from comparison of the model calculations and experimental results agree well with those determined from the parameters of the cluster creation process. The combination of experiment and modeling also makes it possible to estimate the effective escape depth for electron propagation in free clusters. For Ar, Kr, and Xe clusters of varying mean size, absolute determination of the surface and bulk electron binding energies of the core levels used in the experiments has also been made.     

Probing the electronic structure of early transition-metal oxide clusters: polyhedral cages of (V2O5)n(-) (n = 2-4) and (M2O5(2)(-) (M = Nb, Ta)

Vanadium oxide clusters, (V2O5)n, have been predicted to possess interesting polyhedral cage structures, which may serve as ideal molecular models for oxide surfaces and catalysts. Here we examine the electronic properties of these oxide clusters via anion photoelectron spectroscopy for (V2O5)n(-) (n = 2-4), as well as for the 4d/5d species, Nb4O10(-) and Ta4O10(-). Well-resolved photoelectron spectra have been obtained at 193 and 157 nm and used to compare with density functional calculations. Very high electron affinities and large HOMO-LUMO gaps are observed for all the (V2O5)n clusters. The HOMO-LUMO gaps of (V2O5)n, all exceeding that of the band gap of the bulk oxide, are found to increase with cluster size from n = 2-4. For the M4O10 clusters, we find that the Nb/Ta species yield similar spectra, both possessing lower electron affinities and larger HOMO-LUMO gaps relative to V4O10. The structures of the anionic and neutral clusters are optimized; the calculated electron binding energies and excitation spectra for the global minimum cage structures are in good agreement with the experiment. Evidence is also observed for the predicted trend of electron delocalization versus localization in the (V2O5)n(-) clusters. Further insights are provided pertaining to the potential chemical reactivities of the oxide clusters and properties of the bulk oxides.     

Gold cluster formation on a fullerene surface

The growth of Au clusters on a fullerene thin film was investigated by in situ photoelectron spectroscopy in the ultraviolet (UPS) and x-ray (XPS) regime. Due to its highly corrugated surface fullerene films provide a wide range of bonding sites which could be exploited as molecular templates and serve to create a cluster superstructure. To gain insight into the fullerene-Au interaction two types of experiments were performed: (i) the deposition of Au on a fullerene surface, and (ii) the deposition of fullerenes on a Au surface. In both experiments an island growth mode is observed. The deposition of submonolayer amounts of C60 onto a gold film showed that the main interaction of the two species is due to chemisorption of the first C60 monolayer. In addition a constant band bending in the fullerene film is detected, but the UPS valence-band spectra show that there is no charge transfer from the Au to the C60 lowest unoccupied molecular orbital. In the reverse experiment, the cluster growth of Au on the corrugated C60 surface, the analysis of the Au core level does not reveal a specific bonding or nucleation site for Au atoms and clusters. This is in contrast to observations with Si clusters, which prefer to reside in the troughs between the fullerene molecules. The Au clusters grow continually from a size of about 55 atoms for the early stages of growth up to 150 atoms for the deposition of a nominal coverage of 1.5 nm. These data are derived from an analysis of the d-band splitting and the Au 4f core-level shift due to delayed photohole relaxation. The thermal stability of the Au-clusters-covered fullerene film was investigated by annealing in situ up to temperatures of 650 degrees C. For temperatures up to 450 degrees C a continuous growth of the clusters is detected, which is accompanied by a slight drop in Au concentration in the range of XPS for annealing temperatures higher than 350 degrees C. This may be due to a ripening of the clusters. The presence of Au apparently delays fullerene sublimation. The film shows a very good thermal stability and even after annealing at 650 degrees C there is still a fullerene film detectable in the photoelectron spectroscopy spectra.     

The far from equilibrium structure of argon clusters doped with krypton or xenon

Heterogeneous clusters created by doping Ar host clusters with Kr or Xe are shown to have radically different structures from the mixed clusters of the same type created by co-expansion of Ar-Kr or Ar-Xe gas mixtures. In contrast to the co-expansion case, the doped mixed clusters can be produced with Kr or Xe on the surface and Ar in the bulk. With the doping technique it is thus possible to control the surface composition of a specific cluster. A study of the cluster properties as a function of the doping pressure is also reported for the case of Ar clusters doped with Xe. The clusters have been studied by means of synchrotron radiation based X-ray photoelectron spectroscopy.     

Structures of small mixed krypton-xenon clusters

Structures of small mixed krypton-xenon clusters of different compositions with an average size of 30-37 atoms are investigated. The Kr 3d(5/2) and Xe 4d(5/2) surface core level shifts and photoelectron intensities originating from corner, edge, and face/bulk sites are analyzed by using soft x-ray photoelectron spectroscopy. Structural models are derived from these experiments, which are confirmed by theoretical simulation taking induced dipole interactions into account. It is found that one or two small Xe cores are partly embedded in the surface of the Kr clusters. These may grow and merge leading to a phase separation between the two rare gas moieties in mixed clusters with increasing the Xe content.     

Hydrogen bonds in liquid water studied by photoelectron spectroscopy

The authors report on photoelectron emission spectroscopy measurements of the oxygen 1s orbital of liquid water, using a liquid microjet in ultrahigh vacuum. By suitably changing the soft x-ray photon energy, within 600-1200 eV, the electron probing depth can be considerably altered as to either predominantly access the surface or predominantly bulk water molecules. The absolute probing depth in liquid water was inferred from the evolution of the O1s signal and from comparison with aqueous salt solution. The presence of two distinctive components in the core-level photoelectron spectrum, with significantly different binding energies, is revealed. The dominant contribution, at a vertical binding energy of 538.1 eV, was found in bulk and surface sensitive spectra. A weaker component at 536.6 eV binding energy appears to be present only in bulk water. Hartree-Fock calculations of O1s binding energies in different geometric arrangements of the water network are presented to rationalize the experimental distribution of O1s electron binding energies.     

Photoelectron imaging of tetrahydrofuran cluster anions (THF)(n) (-) (1≤n≤100)

Anionic tetrahydrofuran clusters (THF)(n) (-) (1≤n≤100) are studied with photoelectron imaging as gas-phase precursors for electrons solvated in THF. Photoelectron spectra of clusters up to n=5 show two peaks, one of which is attributed to a solvated open chain radical anion and the other to the closed THF ring. At n=6, the spectra change shape abruptly, which become more characteristic of (THF)(n) (-) clusters containing solvated electrons. From n=6-100, the vertical detachment energies (VDEs) of these solvated electron clusters increase from 1.96 to 2.71 eV, scaling linearly with n(-1/3). For fully deuterated (THF-d8)(n) (-) clusters, the apparent transition to a solvated electron cluster is delayed to n=11. Extrapolation of the VDEs to infinite cluster size yields a value of 3.10 eV for the bulk photoelectric threshold. The relatively large VDEs at onset and small stabilization with increasing cluster size compared to other solvated electron clusters may reflect the tendency of the bulk solvent to form preexisting voids that can readily solvate a free electron.     

Nature of hydrogen interaction and saturation on small titanium clusters

This work explores the nature of interaction and saturation of hydrogen molecules on small titanium clusters using ab initio calculations. Molecular dynamics simulations and ensuing charge density maps were used to gain insight into the key steps involved in dissociation of the hydrogen molecule on the metal clusters. The mechanistic insights gleaned from these simulations were subsequently utilized to obtain realistic models of the hydrogen saturated titanium clusters. It was found that the most stable hydrogen saturated titanium clusters involve hydrogen multicenter bonds. The observed peaks in the experimental mass and photoelectron spectra of hydrogen saturated titanium clusters are attributed to structures possessing hydrogen multicenter bonds. Hydrogen multicenter bonds are also ascribed to the origin of the broad shoulder in the vibrational spectra of hydrogen cycled Ti-doped NaAlH4 reported in a recent study.     

Core level studies of calcite and dolomite

Conventional X‐ray photoelectron spectroscopy (XPS) and synchrotron‐based X‐ray photoelectron spectroscopy (HRXPS) have been used to study Iceland spar calcite (CaCO₃) and dolomite (CaMg(CO₃)₂). The obtained full widths at half maximum (FWHMs) are mostly narrower than in the previous results, which together with the symmetry of the fitted peaks indicate effective neutralisation of surface charging. Some previously unidentified features observed in the Ca 2p, C 1s and O 1s spectra of calcite have been suggested to be bulk plasmons. Also, surface core level shifts in Ca 2p (in calcite) and Mg 2p (in dolomite) spectra have been obtained and found to be consistent between XPS and HRXPS measurements. A peak attributed to carbide (CaC₂) has been suggested to indicate beam‐assisted interaction with hydrocarbons found on the surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Theoretical characterization of four distinct isomer types in hydrated-electron clusters, and proposed assignments for photoelectron spectra of water cluster anions

Water cluster anions, (H(2)O)(N)(-), are examined using mixed quantum/classical molecular dynamics based on a one-electron pseudopotential model that incorporates many-body polarization and predicts vertical electron detachment energies (VDEs) with an accuracy of ~0.1 eV. By varying the initial conditions under which the clusters are formed, we are able to identify four distinct isomer types that exhibit different size-dependent VDEs. On the basis of a strong correlation between the electron's radius of gyration and its optical absorption maximum, and extrapolating to the bulk limit (N → ∞), our analysis supports the assignment of the "isomer Ib" data series, observed in photoelectron spectra of very cold clusters, as arising from cavity-bound (H(2)O)(N)(-) cluster isomers. The "isomer I" data reported in warmer experiments are assigned to surface-bound isomers in smaller clusters, transitioning to partially embedded isomers in larger clusters. The partially embedded isomers are characterized by a partially formed solvent cavity at the cluster surface, and they are spectroscopically quite similar to internalized cavity isomers. These assignments are consistent with various experimental data, and our theoretical characterization of these isomers sheds new light on a long-standing assignment problem.     

Preferential site occupancy of krypton atoms on free argon-cluster surfaces

Argon clusters have been doped with krypton atoms in a pick-up setup and investigated by means of ultraviolet and x-ray photoelectron spectroscopy (UPS and XPS). The width of the krypton surface feature in the XPS spectra from mixed krypton/argon clusters has been studied and found to be narrower than in the case of homogeneous krypton clusters. By considering known spectral broadening mechanisms of the cluster features and the electron binding energy shift of the cluster surface feature relative to the atomic signal, we conclude that krypton ad-atoms preferentially occupy high-coordination surface sites on the argon host-cluster.     

Synthesis of Au nanoparticles with Bi adlayers using glucose as dispersant

Well-dispersed Au/Bi nanoparticles with average size below 10 nm were prepared by using NaBH₄ to reduce HAuCl₄ with glucose as dispersant. The obtained Au/Bi NPs were well characterized by UV-Vis spectra, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and electrochemical measurements. The electrochemical study found that Bi adlayers on the surface of Au nanoparticles owns two kinds of surface structures, including a low coverage (2 × 2)-Bi adlayer and a close-packed (p × √3)-2 Bi adlayer due to the strong interaction between the two Bi layers and the below Au atoms, which is same with that bulk on Au surface.     

Photoemission on gold-55-clusters derived from gold-phosphine AuP(C6H5)3Cl

We measured XPS and UPS spectra of gold clusters with 55 atoms, embedded in an electrically isolating phosphine matrix, and of gold-phosphine, from which the clusters were chemically derived. Compared to the spectra of bulk gold the valence band spectrum and the core level spectra of the clusters showed shifts of the peaks and the fermi level to higher binding energies. The shift of the peaks could qualitatively be interpreted by a final state effect. We succeeded in a separation of bulk and surface contributions to the core level spectra and in a reasonable quantitative analysis of the valence band spectrum of the clusters. The Au 4f core level spectrum of gold-phosphine showed two peaks at 1.5 eV higher binding energies than the corresponding peaks of the clusters.     

Molecular macrocluster formation on silica surfaces in phenol-cyclohexane mixtures

The adsorption of phenol, an aromatic compound with a hydrogen-bonding group, onto a silica surface in cyclohexane was investigated by colloidal probe atomic force microscopy (AFM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and adsorption isotherm measurements. ATR-FTIR measurements on the silica surface indicated the formation of surface macroclusters of phenol through hydrogen bonding. The ATR-FTIR spectra were also measured on the H-terminated silicon surface to observe the effect of the silanol groups on the phenol adsorption. The comparison of the ATR-FTIR spectra for both the silicon oxide and H-terminated silicon surfaces proved that the silanol groups are necessary for the formation of phenol clusters on the surface. The surface force measurement using colloidal probe AFM showed a long-range attraction between the two silica surfaces in phenol-cyclohexane mixtures. This long-range attraction resulted from the contact of the adsorbed phenol layers for the phenol concentrations below 0.6 mol %, at which no significant phenol clusters formed in the bulk solution. The attraction started to decrease at 0.6 mol % phenol due to the exchange of the phenol molecules between the clusters in the bulk phase and on the surface. The surface density of phenol in the adsorbed layer was calculated on the basis of the long-range attraction and found to be much smaller than the liquid phenol density. The plausible structure of the adsorbed phenol layer was drawn by referring to the crystal structure of the bulk phenol and orientation of the phenol molecules on the surface, estimated by the dichroic analysis of ATR-FTIR spectroscopy. The investigation of the phenol adsorption on the silica surface in a nonpolar solvent using this novel approach demonstrated the effect of the aromatic ring on the surface packing density.     

Transient diffusion and cluster formation of water molecules on Rh(111) at 20 K

The authors investigated the initial stage of water adsorption on Rh(111) at 20 K, using infrared reflection absorption spectroscopy. In this low coverage region, isolated water molecules and small water clusters are observed. Since thermal diffusion is suppressed at 20 K, the formation of water clusters at low coverage is controlled by both coverage and transient diffusion on the surface. Within a simple random walk model of the transient diffusion and clustering process, the authors estimate the mean lateral displacement from the first impact point to the final adsorption site to be 7.6 A; an incoming water molecule on Rh(111) is trapped with eight postcollision hops on the average.