Biomolecule-assisted synthesis and electrochemical hydrogen storage of porous spongelike Ni3S2 nanostructures grown directly on nickel foils

Nanothread-based porous spongelike Ni3S2 nanostructures were synthesized directly on Ni foil by using a simple biomolecule-assisted method. By varying the experimental parameters, other novel Ni3S2 nanostructures could also be fabricated on the nickel substrate. The electrochemical hydrogen-storage behavior of these novel porous Ni3S2 nanostructures was investigated as an example of the potential properties of such porous materials. The thread-based porous spongelike Ni3S2 could electrochemically charge and discharge with the high capacity of 380 mAh g(-1) (corresponding to 1.4 wt % hydrogen in single-walled nanotubes (SWNT)). A novel two-charging-plateaux phenomenon was observed in the synthesized porous spongelike Ni3S2 nanostructures, suggesting two independent steps in the charging process. We have demonstrated that the morphology of the synthesized Ni3S2 nanostructures had a noticeable influence on their electrochemical hydrogen-storage capacity. This is probably due to the size and density of the pores as well as the microcosmic morphology of different nickel sulfide nanostructures. These novel porous Ni3S2 nanostructures should find wide applications in hydrogen storage, high-energy batteries, luminescence, and catalytic fields. This facile, environmentally benign, and solution-phase biomolecule-assisted method can be potentially extended to the preparation of other metal sulfide nanostructures on metal substrates, such as Cu, Fe, Sn, and Pb foils.     

电泳法制备TiO_2纳米管/纳米颗粒复合薄膜的电化学阻抗谱分析(英文)

由于一维(1D)氧化钛纳米结构具有提高染料敏化太阳能电池(DSCs)中的电子传输性能从而进一步提高电池性能的特性,该领域吸引了越来越多研究者的关注.但是一维氧化钛纳米结构如何影响电子传输性能却少有报道.本研究利用电化学阻抗谱(EIS)分析来探索氧化钛纳米颗粒和纳米管复合薄膜的电子传输特性.使用两种不同尺寸(25和100nm)的纳米颗粒和纳米管作为原料,采用电泳沉积方法制备了氧化钛复合薄膜并研究了原料的组成对染料敏化电池的影响以获得最佳的组成.研究结果表明,在大颗粒的质量分数低于20%时,大颗粒的掺入有利于改善氧化钛薄膜的电子传递与电池性能.与完全由颗粒组成的薄膜相比,纳米管的加入有利于电子在氧化钛薄膜里的传输.纳米管、100nm颗粒及25nm颗粒的最佳质量比例为20:16:64.     

Pr掺杂Bi_2MoO_6/TiO_2复合纳米纤维的制备及可见光催化性能

以电纺TiO_2纳米纤维为基质,采用溶剂热法制备了稀土Pr掺杂Bi_2MoO_6/TiO_2复合纳米纤维,利用X射线衍射仪、扫描电子显微镜、透射电子显微镜、紫外-可见-近红外分光光度计和荧光光谱仪等对不同样品的物相、形貌和光学性能等进行表征,以甲基橙为模拟有机污染物,考察了样品的光催化性能.结果表明,在复合样品中,Pr~(3+)进入Bi_2MoO_6晶格,部分取代Bi~(3+)形成施主能级,导致能级带隙变窄,不仅有利于提高样品的可见光催化活性,抑制光生电子-空穴对复合,而且还提高了Bi_2MoO_6/TiO_2的光催化活性和稳定性.当Pr的掺杂量为3%(摩尔分数)时,光催化降解甲基橙的效果最佳,可见光照射180 min时降解率达到93.8%,比纯Bi_2MoO_6/TiO_2的降解率有明显提高.     

Hierarchical TiO2 nanospheres with dominant {001} facets: facile synthesis, growth mechanism, and photocatalytic activity

Hierarchical TiO(2) nanospheres with controlled surface morphologies and dominant {001} facets were directly synthesized from Ti powder by a facile, one-pot, hydrothermal method. The obtained hierarchical TiO(2) nanospheres have a uniform size of 400-500?nm and remarkable 78?% fraction of {001} facets. The influence of the reaction temperature, amount of HF, and reaction time on the morphology and the exposed facets was systematically studied. A possible growth mechanism speculates that Ti powder first dissolves in HF solution, and then flowerlike TiO(2) nanostructures are formed by assembly of TiO(2) nanocrystals. Because of the high concentration of HF in the early stage, these TiO(2) nanostructures were etched, and hollow structures formed on the surface. After the F(-) ions were effectively absorbed on the crystal surfaces, {001} facets appear and grow steadily. At the same time, the {101} facets also grow and meet the {101} facets from adjacent truncated tetragonal pyramids, causing coalescence of these facets and formation of nanospheres with dominant {001} facets. With further extension of the reaction time, single-crystal {001} facets of hierarchical TiO(2) nanospheres are dissolved and TiO(2) nanospheres with dominant {101} facets are obtained. The photocatalytic activities of the hierarchical TiO(2) nanospheres were evaluated and found to be closely related to the exposed {001} facets. Owing to the special hierarchical architecture and high percentage of exposed {001} facets, the TiO(2) nanospheres exhibit much enhanced photocatalytic efficiency (almost fourfold) compared to P25 TiO(2) as a benchmark material. This study provides new insight into crystal-facet engineering of anatase TiO(2) nanostructures with high percentage of {001} facets as well as opportunities for controllable synthesis of 3D hierarchical nanostructures.     

N掺杂富含(001)晶面TiO_2纳米片的制备及N掺杂浓度对可见光催化活性的影响(英文)

采用水热法制备了富含(001)晶面的锐钛矿型TiO2纳米片,并通过改变热处理过程中NH3流速制备不同N掺杂浓度的TiO2纳米片.运用X射线衍射、场发射扫描电镜、高分辨率透射电子显微镜、紫外-可见漫反射光谱、X射线光电子能谱和荧光光谱对光催化剂进行了结构和性能表征,并以罗丹明B为目标降解物,考察了N掺杂浓度对TiO2纳米片可见光催化活性的影响.结果表明,NH3流速为40ml/min时制备的N掺杂TiO2纳米片具有最低的光生电子-空穴复合速率,最高的OH产生能力并表现出最高的光催化活性.同时,讨论了N掺杂浓度对TiO纳米片可见光催化活性影响的机理.     

Fabrication and characterization of upconversion N-doped graphene quantum dots for improving photoelectrocatalytic performance of rutile hierarchical TiO₂ nanowires under visible and near-infrared light irradiations

The development of well-organized and low-priced photoelectrocatalysts for the clean and efficient water splitting reaction is crucial. In this context, novel nitrogen-doped graphene quantum dots (N-GQDs) with high photoluminescence and upconversion emission have been synthesized as excellent light harvester. Subsequently, ordered hierarchical TiO? nanowires were decorated with upconversion N-GQDs as a photoanode by a simple preparation method to improve the photocatalytic performance in the visible and near-infrared (NIR) regions of solar light, not otherwise absorbable by bare TiO? nanostructures. Moreover, the enhancement of charge transfer efficiency and electron–hole separation according to the energy states of N-GQDs and TiO? are considered for the improved photocatalytic performance of water splitting. N-GQDs/TiO₂ shows superior photoelectrocatalytic (PEC) performance, achieving a photocurrent density of 3.0 mA.cm^?2 in 1.0 M KOH solution, which is eight times that of unmodified TiO? at an applied voltage of 1.23 V vs. RHE. The high stability and photoelectrocatalytic activity of oxygen evolution reaction in the presence of newly synthesized N-GQDs are confirmed by chronoamperometry, open-circuit potential measurement, and electrochemical impedance spectroscopy. The as-fabricated photoanode provides an increased solar light harvesting from UV–Vis to NIR due to the application of newly synthesized upconversion GQDs, which increase energy conversion with an appealing perspective.     

Synthesis of F-doped flower-like TiO2 nanostructures with high photoelectrochemical activity

We report on a novel and facile approach for the direct growth of F-doped flower-like TiO(2) nanostructures on the surface of Ti in HF solutions under low-temperature hydrothermal conditions. The influence of the experimental parameters such as temperature, reaction duration, and the HF concentration on the morphology and photoelectrocatalytic activity of the formed F-doped flower-like TiO(2) nanostructures was systematically studied. The presence of HF and the reaction time play an important role in the formation of the F-doped flower-like TiO(2) nanostructures. The synthesized novel F-doped TiO(2) flower-like nanomaterials possess good crystallinity and exhibit high photoelectrochemical activity for water-splitting and photodegradation of organic pollutants compared with P-25, which is currently considered to be one of the best commercial TiO(2) photocatalysts. The approach described in this study provides a simple and novel method to synthesize F-doped TiO(2) nanostructured materials that are ready for practical applications such as the photodegradation of wastewater.     

Microwave-solvothermal synthesis of various polymorphs of nanostructured TiO2 in different alcohol media and their lithium ion storage properties

The various polymorphs (anatase, rutile, and brookite) of TiO(2) with different nanomorphologies have been synthesized by a facile microwave-assisted solvothermal process without surfactants, employing TiCl(4) or TiCl(3) as precursors in various alcohol (ethanol, propanol, butanol, and octanol) media. The samples have been characterized by X-ray diffraction (XRD), electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis. The Ti/Cl ion concentration, reaction pH, and size of the alcohol molecule are found to control the morphology, crystal structure, and crystallite size of the TiO(2) particles. Among the various TiO(2) polymorphs synthesized, the rutile TiO(2) spheres built up of nanorods that were synthesized with TiCl(4) in octanol have an average pore size and surface area of, respectively, 5 nm and 404 m(2)/g and exhibit the best electrochemical performance with a capacity of >200 mAh/g after 100 cycles and high rate capability. The excellent electrochemical properties originate from the nanorod-building morphology and mesoporosity of TiO(2) spheres that provide good electrical contact, accommodates the strain smoothly, and facilitates facile lithium-ion diffusion.     

One-step and self-assembly based fabrication of Pt/TiO2 nanohybrid photocatalysts with programmed nanopatterns

Hybrid Pt/TiO(2) nanostructures with diverse morphologies from nanodot, nanowire to mesoporous structures were obtained by a one-step synthesis based on block copolymer self-assembly. The structural transformation was easily tuned by controlling the relative amount of TiO(2) sol-gel precursor to poly(styrene-block-ethylene oxide) diblock copolymer (PS-b-PEO). These Pt/TiO(2) nanocomposites were utilized as photocatalysts with enhanced activity via synergistic coupling. Key parameters including the amount of TiO(2), types of morphology of photocatalysts, and the platinization of TiO(2) discussed in this study affected photocatalytic performance given that the hybrids were well-dispersed in nanopatterned configurations.     

温度控制TiO2纳米管及管/线复合阵列的制备

以含有NH4F的乙二醇溶液为电解液,在宽温度范围内(10~70℃)对纯Ti表面进行阳极氧化,制得形貌可控的TiO2纳米结构。利用场发射扫描电子显微镜(FESEM)和透射电镜(TEM)对纳米TiO2的形貌进行表征。结果表明,随着电解液温度的变化,纳米TiO2的形貌得到控制,可形成TiO2纳米管阵列及纳米管阵列/纳米线复合结构,温度40~50℃为转折温区。     

Facile SILAR Processed Bi2S3:PbS Solid Solution on MWCNTs for High‐performance Electrochemical Supercapacitor

Carbon based composite materials have gained much attention because of fulfilling desirable properties for supercapacitor application. In the featured work, the thin film of Bi₂S₃:PbS solid solution has been synthesized on multi‐walled carbon nanotubes (MWCNTs) by simple successive ionic layer adsorption and reaction (SILAR) method. The nanoparticle morphology provides sufficient electroactive channels for electrolyte ions to penetrate during electrochemical activities. The composite exhibits superior specific capacitance 676 F/g at constant specific current density of 5.56 A/g with fast charge‐discharge cycles. In association of energy storage characteristics, the fabricated symmetric cell exhibits excellent energy density of 13.36 Wh/kg by acquiring power density of 0.83 kW/kg. The superior results of the hybrid electrode promise a novel direction for high performance supercapacitor application.     

Pt‐Pd‐Co Trimetallic Alloy Network Nanostructures with Superior Electrocatalytic Activity towards the Oxygen Reduction Reaction

Pt alloy nanostructures show great promise as electrocatalysts for the oxygen reduction reaction (ORR) in fuel cell cathodes. Herein, three‐dimensional (3D) Pt‐Pd‐Co trimetallic network nanostructures (TNNs) with a high degree of alloying are synthesized through a room temperature wet chemical synthetic method by using K₂PtCl₄/K₃Co(CN)₆–K₂PdCl₄/K₃Co(CN)₆ mixed cyanogels as the reaction precursor in the absence of surfactants and templates. The size, morphology, and surface composition of the Pt‐Pd‐Co TNNs are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected‐area electron diffraction (SAED), energy dispersive spectroscopy (EDS), EDS mapping, X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS). The 3D backbone structure, solid nature, and trimetallic properties of the mixed cyanogels are responsible for the 3D structure and high degree of alloying of the as‐prepared products. Compared with commercially available Pt black, the Pt‐Pd‐Co TNNs exhibit superior electrocatalytic activity and stability towards the ORR, which is ascribed to their unique 3D structure, low hydroxyl surface coverage and alloy properties.     

Facile Synthesis of Three‐Dimensional Pt‐TiO2 Nano‐networks: A Highly Active Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Three‐dimensional (3D) porous metal and metal oxide nanostructures have received considerable interest because organization of inorganic materials into 3D nanomaterials holds extraordinary properties such as low density, high porosity, and high surface area. Supramolecular self‐assembled peptide nanostructures were exploited as an organic template for catalytic 3D Pt‐TiO₂ nano‐network fabrication. A 3D peptide nanofiber aerogel was conformally coated with TiO₂ by atomic layer deposition (ALD) with angstrom‐level thickness precision. The 3D peptide‐TiO₂ nano‐network was further decorated with highly monodisperse Pt nanoparticles by using ozone‐assisted ALD. The 3D TiO₂ nano‐network decorated with Pt nanoparticles shows superior catalytic activity in hydrolysis of ammonia–borane, generating three equivalents of H₂.     

Preparation of nearly monodisperse multiply coated submicrospheres with a high refractive index

Nearly monodisperse SiO2/TiO2/SiO2 multiply coated submicrospheres with nearly monodisperse silica submicrospheres as cores, thick titania layers, and thin silica skin were prepared to increase the refractive index of complex submicrospheres while keeping their near monodispersity and perfect surface properties. Nearly monodisperse colloidal silica submicrospheres as cores with a diameter of 200 nm were synthesized by a seeding technique on the basis of the hydrolysis of tetraethyl orthosilicate (TEOS) in an aqueous ethanol solution with ammonia as catalyst. On the basis of the hydrolysis of tetrabutyl orthotitanate, a procedure combining continuous feeding with multistep coating was determined to prepare titania coatings about 40 nm thick and increase the refractive index of the complex submicrospheres. The hydrolysis of TEOS was still used to get the outmost silica coating about 10 nm thick on titania coated silica submicrospheres to eliminate random aggregation caused by the TiO2 surface properties of the TiO2/SiO2 complex submicrospheres during the final fabrication of photonic crystals.     

Reductive deposition of Rh nanostructures on n-type porous silicon: X-ray absorption and X-ray excited optical luminescence studies

22Porous silicon (PS) prepared from an n-type Si(100) wafer was utilized as a reducing agent and a nanosubstrate for the reduction of rhodium complex ions [RhCl6]3- from aqueous solution to metallic Rh nanostructures on the surface of the n-type PS. The morphology and the electronic properties of the PS layers as well as the rhodium nanostructures were studied by field emission scanning electron microscopy, X-ray absorption fine structures spectroscopy, and X-ray excited optical luminescence (XEOL). The average particle size of Rh nanostructures on PS was estimated to be approximately 7 nm by the X-ray diffraction pattern. The specificity ofXEOL allowed for the investigation of the effect of Rh nanostructures on the optical properties of PS.     

Self-assembled Synthesis of 3D CuO Flocculus-like Nanosheet-based Hierarchical Nanostructures

A simple, surfactant-free, and environmentally benign method has been developed to synthesize a novel 3D flocculus-like CuO hierarchical nanostructure self-assembled with 2D nanosheet as building blocks. Detailed proofs demonstrate that the overall synthetic process underwent the dehydration and re-crystallization of precursor Cu(OH)₂ nanowires, and the subsequent two-step oriented attachment. In addition, 3D butterfly-like and flower-like CuO nanostructures consisted of 2D nanosheets could be obtained by adjusting the concentration of NaOH(c_NaOH) in the solution. c_NaOH played a key role in tailoring the thickness of the nanosheets and changing the morphology of the product. This report may be helpful to constructing fine-tune hierarchical CuO nanostructures under basic conditions.     

Wet chemical synthesis of Cu/TiO2 nanocomposites with integrated nano-current-collectors as high-rate anode materials in lithium-ion batteries

Using a soft-template assisted method, well-organized Cu/TiO(2) nanoarchitectured electrode materials with copper nanowires as their own current collectors are synthesized by controlled hydrolysis of tetrabutyl titanate in the presence of Cu-based nanowires, and investigated by SEM, TEM, XRD, Raman spectroscopy and electrochemical tests towards lithium storage. Two types of Cu/TiO(2) nanocomposites with different TiO(2) grain sizes are obtained by using different thermal treatments. The two types of Cu/TiO(2) nanocomposites show much enhanced rate performances compared with bare TiO(2). A high-rate capability (reversible capacity at 7500 mA g(-1) still accounts for 58% of its initial capacity at 50 mA g(-1)) is observed for the Cu/TiO(2) nanocomposite with smaller TiO(2) grain size. The improvements can be attributed to the integrated Cu nanowires as mechanical supports and efficient current collectors. A cell made from the Cu/TiO(2) nanoarchitectured electrodes exhibits promise as an energy storage device with both high energy and high power densities.     

Photoelectrocatalytic Oxidation of Glutathione Based on Porous TiO(2)-Pt Nanowhiskers

The performance of TiO(2) nanoparticles is extremely attractive in various areas of chemical and biochemical engineering as they can effectively work by combining the photocatalytic property with various superior properties of the related nanostructure. The relevant photoelectrochemical detection has attracted considerable interest and shown potential applications in a wide range of areas. In this study, we have prepared new nanowhiskers of platinum-doped titanium dioxide (TiO(2)-Pt), which could be further used to fabricate a novel nanointerface for the sensitive detection of biomolecules including glutathione (GSH). Our observations demonstrate that the sensitive TiO(2)-Pt nanowhiskers biointerface could be readily fabricated by casting the TiO(2)-Pt nanowhiskers suspension on a glassy carbon electrode (GCE), which could readily combine the photocatalytic and eletrocatalytic properties of TiO(2) nanocomposites to introduce a novel photoelectrocatalytic biosensor for GSH detection in real samples. Compared to other analysis strategies, the TiO(2)-Pt nanowhiskers-modified GCE showed a considerably high sensitivity for the detection of GSH due to the excellent photoelectrocatalytic ability of the porous TiO(2)-Pt nanowhiskers. Scanning electron microscopy (SEM), Raman spectroscopy, and electrochemical impedance spectroscopy have shown that Pt can readily blend with porous TiO(2) nanowhiskers and facilitate the relevant catalysis property of TiO(2), resulting in the enhanced photoelectrocatalytic effect. Thus, through the new strategy of the utilization of the excellent photoelectrocatalytic property of TiO(2)-Pt nanocomposites, it is possible to realize the rapid electrochemical detection of glutathione with high sensitivity, low cost, and good reproducibility.     

Rutile TiO2 nano-branched arrays on FTO for dye-sensitized solar cells

Hierarchical TiO(2) nanostructures would be desirable for preparing dye-sensitized solar cells because of their large amount of dye adsorption and superior light harvesting efficiency, as well as efficient charge separation and transport properties. In this study, rutile TiO(2) nano-branched arrays grown directly on transparent conductive glass (FTO) were prepared by a facile two-step wet chemical synthesis process, using a simple aqueous chemical growth method involving immersing the TiO(2) nanorod arrays in an aqueous TiCl(4) solution as seeds, which were prepared by a hydrothermal method. The dye-sensitized solar cells based on the TiO(2) nano-branched arrays which were only about 3 μm in length show a short-circuit current intensity of 10.05 mA cm(-2) and a light-to-electricity conversion efficiency of 3.75%, which is nearly three times as high as that of bare nanorod arrays, due to the preferable nanostructure, which not only retains the efficient charge separation and transport properties of the nanorod arrays, but also can improve the amount of dye adsorption due to the increased specific surface area from the nanobranches.