Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of chelate ring size on the stability of a [Cu(II)-NO] intermediate

Three copper(II) complexes, 1, 2, and 3 with L(1), L(2) and L(3) [L(1) = 2-(2-aminoethyl)-pyridine; L(2) = 2-(N-ethyl-2-aminoethyl)-pyridine; L(3) = 3,3'-iminobis(N,N-dimethylpropylamine)], respectively, were synthesized and characterized. Addition of nitric oxide gas to the degassed acetonitrile solution of the complexes were found to result in the reduction of the copper(II) center to copper(I). In cases of complexes 1 and 2, the formation of the [Cu(II)-NO] intermediate prior to the reduction of Cu(II) was evidenced by UV-visible, solution FT-IR and X-band EPR spectroscopic studies. However, for complex 3, the formation of [Cu(II)-NO] has not been observed. DFT calculations on the [Cu(II)-NO] intermediate generated from complex 1 suggest a distorted square pyramidal geometry with the NO ligand coordinated to the Cu(II) center at an equatorial site in a bent geometry. In the case of complex 1, the reduction of the copper(II) center by nitric oxide afforded ligand transformation through diazotization at the primary amine site in acetonitrile solution; whereas, in an acetonitrile-water mixture, it resulted in 2-(pyridine-2-yl)ethanol. On the other hand, in cases of complexes 2 and 3, it was found to yield N-nitrosation at the secondary amine site in the ligand frameworks. The final organic products, in each case, were isolated and characterized by various spectroscopic studies.     

Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of substitution on ligand nitrosation

Three copper(ii) complexes with bidentate ligands L(1), L(2) and L(3) [L(1), N,N(/)-dimethylethylenediamine; L(2), N,N(/)-diethylethylenediamine and L(3), N,N(/)-diisobutylethylenediamine], respectively, were synthesized as their perchlorate salts. The single crystal structures for all the complexes were determined. The nitric oxide reactivity of the complexes was studied in acetonitrile solvent. The formation of thermally unstable [Cu(II)-NO] intermediate on reaction of the complexes with nitric oxide in acetonitrile solution was observed prior to the reduction of copper(II) centres to copper(I). The reduction was found to result with a simultaneous mono- and di-nitrosation at the secondary amine sites of the ligand. All the nitrosation products were isolated and characterized. The ratio of the yield of mono- and di-nitrosation product was found to be dependent on the N-substitution present in the ligand framework.     

Nitric oxide reduction of copper(II) complexes: spectroscopic evidence of copper(II)-nitrosyl intermediate

Two copper(II) complexes, 1 and 2 with L(1) and L(2) [L(1) = 2- aminomethyl pyridine; L(2) = bis-(2-aminoethyl)amine], respectively, in degassed acetonitrile solvent, on exposure to NO gas, were found to form a thermally unstable [Cu(II)-NO] intermediate which then resulted in the reduction of the copper(II) centers. The formation of the [Cu(II)-NO] intermediate was evidenced by UV-visible, FT-IR, and EPR spectroscopic studies. The reduction of the copper(II) centers by nitric oxide afforded ligand transformation through diazotization at the primary amine coordination site, in both cases. The modified ligands, in each case, were isolated and characterized.     

Reduction of copper(II) complexes of tridentate ligands by nitric oxide and fluorescent detection of NO in methanol and water media

Two copper complexes, 1 and 2, with tridentate N-donor ligands, L(1) and L(2) [L(1)= (1-methyl-1H-imidazol-2-ylmethyl)-(2-pyridin-2-yl-ethyl)amine, L(2) = (2-pyridin-2-yl-ethyl)-pyridin-2 yl-methylamine] respectively, have been synthesized and characterized. On exposure to nitric oxide, the copper(II) centers in complexes 1 and 2 were found to undergo reduction in various solvents. In acetonitrile solvent the reduction was accompanied by a simultaneous N-nitrosation on the secondary amine center on the ligand frameworks. Complexes 3 and 4 were prepared with ligands L(3) and L(4), respectively. L(3) and L(4) [L(3) = 5-dimethylamino-naphthalene-1-sulfonic acid (1-methyl-1H-imidazol-2-ylmethyl)-(2-pyridin-2-yl-ethyl)-amide; L(4) = 5-dimethylamino-naphthalene-1-sulfonic acid(2-pyridin-2-yl-ethyl)-pyridin-2-ylmethyl-amide] are the dansyl derivatives of L(1) and L(2), respectively. Complex 4, due to paramagnetic quenching, does not display any fluorescence; however, on addition of nitric oxide to a methanol or water solution of complex 4, the fluorescence intensity of the fluorophore has been found to be restored. This is attributed to the reduction of the Cu(II) center by nitric oxide to diamagnetic Cu(I). The turn-on of quenched fluorescence intensity has been observed both in methanol and water media.     

Copper(ii) complexes as turn on fluorescent sensors for nitric oxide

Two copper(ii) complexes, 1 and 2, of two tridentate N-donor ligands, L(1) and L(2) [L(1) = dansyl derivative of bis-[3-(dimethylamino)-propyl]amine; L(2) = dansyl derivative of dipropylenetriamine] were synthesized and characterized. The quenched fluorescence intensity of complexes 1 and 2, in degassed methanol or aqueous (buffered at pH 7.2) solution, was found to reappear on exposure to nitric oxide. This is attributed to the reduction of paramagnetic Cu(ii) center by nitric oxide to diamagnetic Cu(i).     

First example of a Cu(I)-(η2-O,O)nitrite complex derived from Cu(II)-nitrosyl

Copper(II) complex, 1, of the bidentate ligand, L [L = bis(2-ethyl-4-methyl-imidazol-5yl)methane] has been synthesized and structurally characterized. Addition of nitric oxide gas to a degassed acetonitrile solution of 1 yielded the corresponding copper(ii)-nitrosyl complex, 2. In acetonitrile, complex 2 on reaction with water afforded the corresponding copper(I)-nitrite complex, 3. Single crystal structure of complex 3 reveals the bidentate nitrite (η(2)-O,O) bonding. This is the first example of a structurally characterized Cu(I)-(η(2)-O,O)nitrite complex with N-donor ligand. The sequence of the formation of these complexes is just the reverse of the key steps of the postulated nitrite reduction cycle by CuNiRs.     

Synthesis and reactivity of a (mu-1,1-hydroperoxo)(mu-hydroxo)dicopper(II) complex: ligand hydroxylation by a bridging hydroperoxo ligand

A new tetradentate tripodal ligand (L3) containing sterically bulky imidazolyl groups was synthesized, where L3 is tris(1-methyl-2-phenyl-4-imidazolylmethyl)amine. Reaction of a bis(mu-hydroxo)dicopper(II) complex, [Cu2(L3)2(OH)2]2+ (1), with H2O2 in acetonitrile at -40 degrees C generated a (mu-1,1-hydroperoxo)dicopper(II) complex [Cu2(L3)2(OOH)(OH)]2+ (2), which was characterized by various physicochemical measurements including X-ray crystallography. The crystal structure of 2 revealed that the complex cation has a Cu2(mu-1,1-OOH)(mu-OH) core and each copper has a square pyramidal structure having an N3O2 donor set with a weak ligation of a tertiary amine nitrogen in the apex. Consequently, one pendant arm of L3 in 2 is free from coordination, which produces a hydrophobic cavity around the Cu2(mu-1,1-OOH)(mu-OH) core. The hydrophobic cavity is preserved by hydrogen bondings between the hydroperoxide and the imidazole nitrogen of an uncoordinated pendant arm in one side and the hydroxide and the imidazole nitrogen of an uncoordinated pendant arm in the other side. The hydrophobic cavity significantly suppresses the H/D and 16O/18O exchange reactions in 2 compared to that in 1 and stabilizes the Cu2(mu-1,1-OOH)(mu-OH) core against decomposition. Decomposition of 2 in acetonitrile at 0 degrees C proceeded mainly via disproportionation of the hydroperoxo ligand and reduction of 2 to [Cu(L3)]+ by hydroperoxo ligand. In contrast, decomposition of a solid sample of 2 at 60 degrees C gave a complex having a hydroxylated ligand [Cu2(L3)(L3-OH)(OH)2]2+ (2-(L3-OH)) as a main product, where L3-OH is an oxidized ligand in which one of the methylene groups of the pendant arms is hydroxylated. ESI-TOF/MS measurement showed that complex 2-(L3-OH) is stable in acetonitrile at -40 degrees C, whereas warming 2-(L3-OH) at room temperature resulted in the N-dealkylation from L3-OH to give an N-dealkylated ligand, bis(1-methyl-2-phenyl-4-imidazolylmethyl)amine (L2) in approximately 80% yield based on 2, and 1-methyl-2-phenyl-4-formylimidazole (Phim-CHO). Isotope labeling experiments confirmed that the oxygen atom in both L3-OH and Phim-CHO come from OOH. This aliphatic hydroxylation performed by 2 is in marked contrast to the arene hydroxylation reported for some (mu-1,1-hydroperoxo)dicopper(II) complexes with a xylyl linker.     

双大环配体与铜双核配合物的合成、晶体结构和磁偶合性质

由新型双功能配体2,6-双(1,5,9-三氮杂环十二烷)-2,6-二甲基苯甲酸(L)与溴化铜在甲醇中反应得到新型铜双核配合物[Cu~2LBr~2]Br.3H~2O单晶。晶体结构分析表明:2个Cu(II)中心离子由配体L中的羧酸基团桥联;2个等价的Cu(II)中心离子均由双功能配体L的1,5,9-三氮杂环十二烷([12aneN~3)的3个氮原子和羧酸的1个氧原子及1个Br^-离子配位,并都处在三角双锥的配位环境中;分子内Cu...Cu双核间的距离为0.5884(6)nm。变温磁化率数据表明:在同一分子中的2个铜核之间存在反铁磁偶合作用(J=-22.49cm^-^1)。     

Syntheses and ligand interconversions of copper(II) derivatives of the metalloligand [Pt2(mu-S)2(PPh3)4

The reactivity of the metalloligand [Pt2(micro-S)2(PPh3)4] towards a variety of copper(II)-ligand systems has been studied. Reaction of [Pt2(mu-S)2(PPh3)4] with copper(II) halide complexes [CuCl2L](L = 2,2'-bipyridine and 1,10-phenanthroline) gave trinuclear dicationic products [Pt2(mu-S)2(PPh3)4CuL]2+, and the 8-hydroxyquinolinate (hq) complex [Cu(hq)2] gave [Pt2(mu-S)2(PPh3)4Cu(hq)]+, isolated as their BPh4- or PF6- salts. Related cationic complexes with other ancillary amine ligands (1,2-diaminoethane, 1,2-diaminopropane, 1,2-diaminocyclohexane) were obtained by reactions of [Pt2(mu-S)2(PPh3)4] with CuCl2 and the amine. In contrast, reaction of [Pt2(mu-S)2(PPh3)4] with CuCl2 and NH3 in methanol gave the intensely blue methoxy-bridged dicopper complex [{Pt(2)(mu-S)2(PPh3)4Cu(OMe)}2]2+, isolated as its hexafluorophosphate salt. Copper beta-diketonate complexes reacted with [Pt2(mu-S)2(PPh3)4] giving [Pt2(mu-S)2(PPh3)4Cu(beta-diketonate)]+PF6- complexes, with the CH3COCHCOCH3(acac) and CF3COCHCO(2-thienyl)(tta) derivatives characterised by X-ray structure determinations. The local Cu(II) environment ranges from distorted square-planar to an intermediate form of square-planar and tetrahedral. The beta-diketonate derivatives show varying stability towards methanolysis, giving [{Pt2(mu-S)2(PPh3)4Cu(OMe)}2]2+.     

Amine mediated proton transfer reaction and C-Cl bond activation of solvent chloroform by a trinuclear copper(II) complex of a glucopyranosylamine derived ligand

An amine mediated C-Cl bond activation process of the solvent chloroform has been explored by a coordinatively labile trinuclear Cu(II) complex, [Cu3(L1)2(MeOH)(H2O)] (1), derived from N-(3-tert-butyl-2-hydroxybenzylidene)-4,6-O-ethylidene--D-glucopyranosylamine (H3L1). The effect of activation is extremely high with methylamine, resulting in the formation of [Cu(MeNH2)5]Cl2 (2) and [Cu(L2)2] (3; HL2 = 2-tert-butyl-6-[(methylimino)methyl]phenol), however, under identical conditions it is moderate with ethylamine resulting in the isolation of crystals of the intermediate amine bound trinuclear copper(II) complex, [Cu3(L1)2(EtNH2)2(MeOH)2] (5), which was further converted into the mononuclear complex, [Cu(HL1)(EtNH2)] (6), in a novel crystal-to-crystal transformation. The successive isolation of the ethylamine-bound tri- and mononuclear complexes, 5 and 6, supported the occurrence of proton transfer reactions, which might be a key step in C-Cl bond activation. The primary and secondary amines, 2-aminomethylpyridine, N,N-dimethylethylenediamine, and 1,4,7-triazacyclononane, also having chelating features further enhance the rate of activation. No activation has been noted in the case of triethylamine and N,N,N,N-tetramethylethylenediamine. Formation of a carbene-trapped compound, 2,6-xylyl isocyanide, was confirmed in the reaction of complex 1 with 1,4,7-triazacyclononane and 2,6-xylidine in CHCl3, suggesting that the C-Cl bond cleavage led to the generation of dichlorocarbene. In addition, the mononuclear complex 6 has been transformed into a homotrinuclear complex [Cu3(L1)2(MeOH)2] by treatment with Cu(II) ions in MeOH/CHCl3, suggesting the possibility that the former could be regarded as a suitable metalloligand for heterotrimetallic complex synthesis.     

Asymmetric sulfur atom coordination in a copper(II) dipicolylamine (DPA) complex with a thioglycoside ligand

The 2,2'-dipicolylamine (DPA)-tethered thioglycoside ligand, N,N-bis(2-pyridylmethyl)-2-aminoethyl 1-deoxy-1-thio-2,3,4,6-tetra-O-acetyl-beta-d-glucopyranoside (sL1), has been prepared and its copper(II) complex synthesized. Using copper(II) chloride, the copper complex was isolated as a chloride-bound species formulated as [Cu(sL1)Cl(ClO(4))](1). The corresponding O-glycoside complex ([Cu(L1)Cl](ClO(4)), 2) was also prepared using L1 (N,N-bis(2-pyridylmethyl)-2-aminoethyl 2,3,4,6-tetra-O-acetyl-beta-d-glucopyranoside), and both complexes were characterized and compared by means of X-ray crystallography, cyclic voltammetry, electronic absorption and circular dichroism (CD) spectra. Although both complexes exhibited similar copper coordination geometries, the absolute configuration of the O/S chiral center generated by the copper coordination was inverted. The electronic and CD spectra of acetonitrile solutions of 1 and 2 were different likely due to the presence of a copper-sulfur charge-transfer band for 1. Complex also exhibits a large Cotton effect around 700 nm. The corresponding d-d transition of the copper(II) center reveals that the asymmetric copper-sulfur (oxygen) coordination remains even in solution.     

Reporting a unique example of electronic bistability observed in the form of valence tautomerism with a copper(II) helicate of a redox-active nitrogenous heterocyclic ligand

Valence tautomeric compounds involving nondixolene-type ligands are rare. The triple-helicate copper(II) complex [Cu(II)(2)(L)(3)](ClO(4))(4)·3CH(3)CN (1) containing a redox-active N-heterocyclic ligand (L) has been prepared and displays VT equilibrium in solution, as established by electronic spectroscopy, electron paramagnetic resonance spectroscopy, and cyclic and differential pulse voltammetry carried out at variable temperatures. The process involves intramolecular transfer of an electron from one of the L ligands to a copper(II) center, leading to the oxidation of L to an L(?+) radical with concomitant reduction of the Cu(II) center to Cu(I), as shown by the equilibrium [Cu(II)Cu(I)L(?+)L(2)](4+) ? [Cu(II)(2)L(3)](4+).     

Bispidine copper(II) compounds: effects of the rigid ligand backbone

Approximative density-functional theory calculations indicate that the tetradentate ligand L (L = 2,4-bis-(2-pyridyl)-3,7-diaza-[3.3.1]-bicyclononane) enforces an unusual and strong binding of a co-ligand (substrate) to a copper(II) center. The co-ligand in [Cu(L)(Cl)](+) completes a square-pyramidal coordination around copper(II) and binds in the equatorial plane rather than on the apical position. This configuration is a stable geometric isomer for the model complex [Cu(NH3)2(imine)2(Cl)](+), but it is disfavored by approximately 10 kJ mol(-1) and not commonly observed for CuN4 chromophores with a monodentate co-ligand. The equatorial coordination increases the bond energy of the copper(II)-chloride bond by approximately 80 kJ mol(-1), and similar results are expected for other copper(II)-L-substrate complexes, some of which show strong catalytic activity or unusual stability. Despite the enforced configuration, L does not impose significant steric strain on the copper(II) center but is well preorganized for the Jahn-Teller labile ion in this unusual geometry. The preorganization extends to the orientation of the pyridine donors (torsion angle around the copper-pyridine bond), and this seems to be of importance in the reactivity of the copper-L complexes and their derivatives.     

Reductive nitrosylation and proton-assisted bridge splitting of a (mu-oxo)dimanganese(III) complex derived from a polypyridine ligand with one carboxamide group

Aerobic oxidation of the Mn(II) complex [Mn(Papy3)(H2O)](ClO4) (1, PaPy3- is the anion of the designed ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide) in acetonitrile affords the (mu-oxo)dimanganese(III) complex [(Mn(PaPy3))2(mu-O)](ClO4)2 (3) in high yield. The unsupported single oxo bridge between the two high-spin Mn(III) centers in 3 is readily cleaved upon addition of proton sources such as phenol, acetic acid, and benzoic acid, and complexes of the type [Mn(PaPy3)(L)](ClO4) (5, L = PhO-; 6, L = AcO-; 7, L = BzO-) are formed. The basicity of the bridge is evident by the fact that simple addition of methanol to a solution of 3 in acetonitrile affords the methoxide complex [Mn(PaPy3)(OMe)](ClO4) (4). The structures of 3-5 and 7 have been determined. Passage of NO through a solution of 3 in acetonitrile produces the [Mn-NO]6 nitrosyl [Mn(PaPy3)(NO)](ClO4) (2) via reductive nitrosylation. Complexes 4-7 also afford the [Mn-NO]6 nitrosyl 2 upon reaction with NO. In the latter case, the anionic O-based ligands (such as MeO- and PhO-) act as built-in bases and promote reductive nitrosylation of the Mn(III) complexes.     

Synthesis, structure and dioxygen reactivity of a bis(micro-iodo)dicopper(I) complex supported by the [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine ligand

The air-sensitive bis(micro-iodo)dicopper(I) complex 1 supported by [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine (L) has been prepared by treating copper(I) iodide with L in anhydrous THF. Compound 1 crystallizes as a dimer in space group C2/c. Each copper(I) center has distorted tetrahedral N2I2 coordination geometry with Cu-N(pyridyl) distances 2.061(3) and 2.063(3) A, Cu-I distances 2.6162(5) and 2.7817(5) and a Cu...Cu distance of 2.9086(8) A. Complex 1 is rapidly oxidized by dioxygen in CH2Cl2 with a 1 : 1 stoichiometry giving the bis(micro-iodo)peroxodicopper(II) complex [Cu(L)(micro-I)]2O2 (2). The reaction of 1 with dioxygen has been characterized by UV-vis, mass spectrometry, EPR and Cu K-edge X-ray absorption spectroscopy at low temperature (193 K) and above. The mass spectrometry and low temperature EPR measurements suggested an equilibrium between the bis(micro-iodo)peroxodicopper(II) complex 2 and its dimer, namely, the tetranuclear (peroxodicopper(II))2 complex [Cu(L)(micro-I)]4O4 (2'). Complex 2 undergoes an effective oxo-transfer reaction converting PPh3 into O=PPh3 under anaerobic conditions. At sufficiently high concentration of PPh3, the oxygen atom transfer from 2 to PPh3 was followed by the formation of [Cu(PPh3)3I]. The dioxygen reactivity of 1 was compared with that known for other halo(amine)copper(I) dimers.     

Coordination chemistry of amine bis(phenolate) cobalt(II), nickel(II), and copper(II) complexes

Cobalt(II), nickel(II), and copper(II) (1, 2, and 3) complexes of the dianionic form of the bis(phenolate) ligand N,N-bis(3,4-dimethyl-2-hydroxybenzyl)-N',N'-dimethylethylenediamine (H2L) have been synthesized by electrochemical oxidation of the appropriate metal in an acetonitrile solution of the ligand. When copper is used as the anode, the addition of 1,10-phenanthroline to the electrolytic phase gave rise to a different compound [CuL]2.2CH3CN (4). The compounds [CoL]2.2CH3CN (1), [Ni2L2(H2O)].H2O (2), [CuL]2.3H2O (3), and [CuL]2.2CH3CN (4) were characterized by microanalysis, IR, electronic spectroscopy, FAB mass spectrometry, magnetic measurements and by single-crystal X-ray diffraction. The crystal structures show that the complexes have a dinuclear structure. In compounds 1, 3, and 4, two metal ions are coordinated by the two amine nitrogens and the two phenol oxygen atoms of a deprotonated pendant phenol ligand, with one phenolic oxygen atom from ligand acting as a bridge. In compounds 1 and 3, each metal center has a geometry that is closest to trigonal bipyramidal. Magnetic susceptibility data for both compounds show an antiferromagnetic coupling with 2J = -15 cm(-1) for the cobalt(II) complex and a strong antiferromagnetic coupling with 2J = -654 cm(-1) for the copper(II) complex. However, in 4 the geometry around the metal is closer to square pyramidal and the compound shows a lower antiferromagnetic coupling (2J = -90 cm(-1)) than in 3. The nickel atoms in the dimeric compound 2 are hexacoordinate. The NiN2O4 chromophore has a highly distorted octahedral geometry. In this structure, a dianionic ligand binds to one nickel through the two amine nitrogen atoms and the two oxygen atoms and to an adjacent nickel via one of these oxygen atoms. The nickel atoms are linked through a triple oxygen bridge involving two phenolic oxygens, each from a different ligand, and an oxygen atom from a water molecule. The two nickel ions in 2 are ferromagnetically coupled with 2J = 19.8 cm(-1).     

Metal-catalysed oxidation processes in thiosemicarbazones: new complexes with the ligand N-{2-([4-N-ethylthiosemicarbazone]methyl)phenyl}-p-toluenesulfonamide

The coordination behaviour of a new thiosemicarbazone Schiff-base building block, N-{2-([4-N-ethylthiosemicarbazone]methyl)phenyl}-p-toluenesulfonamide, H2L1 (1), incorporating a bulky tosyl group, towards Mn II, Fe II, Co II, Ni II, Cu II, Zn II, Cd II, Ag I, Sn II, and Pb II has been investigated by means of an electrochemical preparative procedure. Most metal complexes of L1 have the general formula [M(L1)]2.nX (M=Mn, Fe, Co, Ni, Cu, Cd, Pb; n=0-4, X=H2O or CH3CN), as confirmed by the structure of [Pb(L1)]2 (15), in which the lone pair on lead is stereochemically active. This lead(II) complex shows an intense fluorescence emission with a quantum yield of 0.13. In the case of silver, the complex formed was found to possess a stoichiometry of [Ag2(L1)]2.3H2O. During reactions with manganese and copper metals, interesting catalysed processes have been found to take place, with remarkable consequences regarding the ligand skeleton structure. In synthesising the manganese complex, we obtained an unexpected dithiolate thiosemicarbazone tosyl ligand, H2L2, as a side-product, which has been fully characterised, including by X-ray diffraction analysis. In the case of copper, the solid complex has the formula [CuL1]2, but the crystallised product shows the copper atoms coordinated to a new cyclised thiosemicarbazone ligand, H2L3, as in the structures of the complexes [Cu(L3)]2.CH3CN (8) and [Cu(L3)(H2O)]2.CH3CN.H2O (9). The zinc complex [Zn(L1)]4 (12) displays a particular tetranuclear zeolite-type structure capable of hosting small molecules or ions, presumably through hydrogen bonding.     

Heme/non-heme diiron(II) complexes and O2, CO, and NO adducts as reduced and substrate-bound models for the active site of bacterial nitric oxide reductase

As a first generation model for the reactive reduced active-site form of bacterial nitric oxide reductase, a heme/non-heme diiron(II) complex [(6L)Fe(II)...Fe(II)-(Cl)]+ (2) {where 6L = partially fluorinated tetraphenylporphyrin with a tethered tetradentate TMPA chelate; TMPA = tris(2-pyridyl)amine} was generated by reduction of the corresponding mu-oxo diferric compound [(6L)Fe(III)-O-Fe(III)-Cl]+ (1). Coordination chemistry models for reactions of reduced NOR with O2, CO, and NO were also developed. With O2 and CO, adducts are formed, [(6L)Fe(III)(O2-))(thf)...Fe(II)-Cl]B(C6F5)4 (2a x O2) {lambda(max) 418 (Soret), 536 nm; nu(O-O) = 1176 cm(-1), nu(Fe-O) = 574 cm(-1) and [(6L)Fe(II)(CO)(thf)Fe(II)-Cl]B(C6F5)4 (2a x CO) {nu(CO) 1969 cm(-1)}, respectively. Reaction of purified nitric oxide with 2 leads to the dinitrosyl complex [(6L)Fe(NO)Fe(NO)-Cl]B(C6F5)4 (2a x (NO)2) with nu(NO) absorptions at 1798 cm(-1) (non-heme Fe-NO) and 1689 cm(-1) (heme-NO).     

Binuclear copper(II) complexes with N4O3 coordinating heptadentate ligand: synthesis, structure, magnetic properties, density-functional theory study, and catecholase activity

The N4O3 coordinating heptadentate ligand afforded binuclear complex [Cu 2(H 2L)(mu-OH)](ClO4)2 (1) and [Cu2(L)(H2O)2]PF6 (2). In complex 1, two copper ions are held together by mu-phenoxo and mu-hydroxo bridges, whereas in complex 2, the copper centers are connected only by a mu-phenoxo bridge. In 1, both the Cu(II) centers have square pyramidal geometry (tau=0.01-0.205), whereas in the case of 2, one Cu(II) center has square pyramidal (tau=0.2517) and other one has square based pyramidal distorted trigonal bipyramidal (tau=0.54) geometry. Complexes 1 and 2 show an strong intramolecular and very weak antiferromagnetic interaction, respectively. Density-functional theory calculations were performed to establish the magneto structural correlation between the two paramagnetic copper(II) centers. Both of the complexes display a couple of one-electron reductive responses near -0.80 and -1.10 V. The complexes show significant catalytic activity at pH 8.5 on the oxidation of 3,5-di- tert-butylcatechol (3,5-DTBC) to 3,5-di- tert-butylquinone (3,5-DTBQ), and the activity measured in terms of kcat=29-37 h(-1).     

Intramolecular reductive nitrosylation: reaction of nitric oxide and a copper(II) complex of a cyclam derivative with pendant luminescent chromophores

The base-catalyzed reaction of nitric oxide with the Cu(II) complex Cu(DAC)2+ (DAC = 1,8-bis(9-anthracyl-methyl)-(1,4,8,11-tetraazacyclotetradecane)) leads to reduction of the metal center and the unexpected intramolecular nitrosylation of a secondary amine.