Optical and Magnetic Properties of Conjugate Structures of PbSe Quantum Dots and γ‐Fe2O3 Nanoparticles

An investigation of the optical and magnetic properties of a unique hydrogen‐linked conjugate nanostructure, comprised of superparamagnetic γ‐Fe₂O₃ nanoparticles (NPs) and near‐infrared PbSe nanocrystal quantum dot (NQD) chromophores, is reported. The results show retention of the NQDs’ emission quantum efficiency and radiative lifetime, and only a small red shift of its band energy, upon conjugation to the dielectric surroundings of γ‐Fe₂O₃ NPs. The study also shows the sustainability of the superparamagnetism of the NPs after conjugation, with only a slight decrease of the ferromagnetic–superparamagnetic transition temperature with respect to that of the individual NPs. Thus, the conjugate nanostructure can be considered as a useful medical platform when PbSe NQDs act as fluorescent tags, while the γ‐Fe₂O₃ NPs are used as a vehicle driven by an external magnetic field for targeted delivery of tags or drugs.     

3D Porous Carbon Framework Stabilized Ultra‐Uniform Nano γ‐Fe2O3: A Useful Catalyst System

We present a novel strategy for the scalable fabrication of γ‐Fe₂O₃@3DPCF, a three‐dimensional porous carbon framework (PCF) anchored ultra‐uniform and ultra‐stable γ‐Fe₂O₃ nanocatalyst. The γ‐Fe₂O₃@3DPCF nanocomposites were facilely prepared with the following route: condensation of iron(III) acetylacetonate with acetylacetonate at room temperature to form the polymer precursor (PPr), which was carbonized subsequently at 800 °C. The homogeneous aldol condensation offered an ultra‐uniform distribution of iron, so that the γ‐Fe₂O₃ nanoparticles (NPs) were uniformly distributed in the 3D carbon architecture with the average size of approximate 20 nm. The Fe₂O₃ NPs were capped with carbon, so that the iron oxide maintained its γ‐phase instead of the more stable α‐phase. The nanocomposite was an excellent catalyst for the reduction of nitroarene; it gave >99 % conversion and 100 % selectivity for the reduction of nitroarenes to the corresponding anilines at 100 °C. The fabrication of the γ‐Fe₂O₃@3DPCF nanocatalyst represents a green and scalable method for the synthesis of novel carbon‐based metal oxide nanostructures.     

Mössbauer Spectroscopic Investigation of FeII and FeIII 3,4,5‐Trihydroxybenzoates (Gallates) – Proposed Model Compounds for Iron‐Gall Inks

Iron gallates with iron in the oxidation states Fe²⁺ and Fe³⁺ were prepared and studied by Mössbauer spectroscopy, X‐ray diffraction, and IR spectroscopy. Fe^III 3,4,5‐trihydroxybenzoate (gallate) Fe(C₇O₅H₄) · 2H₂O, whose structure was first determined by Wunderlich, was obtained by the reaction of gallic acid and metallic iron or by oxidation of the Fe^II gallate, which was obtained by the reaction of ferrous sulfate with 3,4,5‐trihydroxybezoic acid (gallic acid) under anoxic conditions. Trials to reproduce the hydrothermal preparation method of Feller and Cheetham show that the result depends crucially on the free gas volume in the reaction vessel. If there is no free volume one obtains the same Fe^III gallate as in the other preparation methods. With a large free volume another compound was found to form whose composition and structure could not be determined. It could be specified only by Mössbauer spectroscopy. Fe^III gallate, the Fe^II gallate, and the new phase show magnetic ordering at liquid helium temperature.     

A Mössbauer spectroscopy investigation of the Intergrowth Phases LaSr3Fe3−xMx010−δ (M = Al,Cu)

Iron-57 Mössbauer spectroscopy confirms a high sensitivity of the three-dimensional magnetic ordering temperature (T_Néel) for a series of new intergrowth phases to both oxygen stoichiometry and the partial substitution of iron by copper and aluminium in the Ruddlesden-Popper phase LaSr₃Fe₃0_10?δ. The chemical isomer shifts suggest that significant covalent electron delocalization exists in these phases. Spectra for the paramagnetic phases indicate two distinct iron coordination environments consistent with x-ray and neutron diffraction structure determinations. The Mössbauer spectra at 4.8 K exhibit the overlap of two magnetic hyperfine patterns corresponding to cooperative magnetic order at the iron sites with internal fields of 45 and 27 Tesla for nominal Fe³⁺ and Fe⁴⁺ sites respectively.     

Structural Properties,Mössbauer Spectra,and Magnetism of Perovskite‐Type Oxides SrFe1–xTixO3–y

Perovskite‐type phases SrFe_1–xTi_xO_3–y with 0.1 ≤ x ≤ 0.7 have been prepared from the oxides, and, in order to reach high oxygen contents and Fe^IV fractions, annealed at oxygen pressures of 60 MPa. The materials were characterised by powder x‐ray and neutron diffraction, ⁵⁷Fe Mössbauer spectroscopy, and magnetic susceptibility measurements. All samples of the series crystallise in a cubic perovskite structure and reveal considerable oxygen deficiency. The Mössbauer parameters suggest that for x = 0.1, where the Fe^IV fraction is about 90%, the itinerant electronic state of SrFeO₃ is essentially retained. In materials with larger x increasing amounts of Ti^IV and Fe^III ions lead to a stronger localisation of the σ* (Fe 3 d – O 2 p) electrons. There is no evidence for a charge disproportionation of Fe^IV in any of the materials. Magnetic susceptibility measurements show a divergence of zero‐field cooled and field‐cooled data below a temperature T_m and deviations from Curie‐Weiss behaviour above T_m. The data are indicative of spin‐glass behaviour due to disorder and competing exchange interactions.     

In situ — High Temperature Mössbauer Spectroscopy of Iron Nitrides and Nitridoferrates

The stoichiometric iron nitrides γ′‐Fe₄N, ε‐Fe₃N and ζ‐Fe₂N were characterized by Mössbauer spectroscopy. The thermal decomposition of ε‐Fe₃N was studied in‐situ by means of a specially developed Mössbauer furnace. We found ε‐Fe₃N to γ′‐Fe₄N and ε‐Fe₃N_x (x ≥ 1.3) as decomposition products and determined the border of γ′/ε transformation at T ? 930 K. Mössbauer spectroscopy was applied to study in‐situ the thermal decomposition of the nitridometalate Li₃[Fe^IIIN₂] and the formation of Li₂[(Li_1‐xFe^I_x)N], the compound with the largest local magnetic field ever observed in an iron containing material. The kinetics of formation and the stability of Li₂[(Li_1‐xFe^I_x)N] was of particular interest in the present study.     

Hydrothermal Synthesis,Crystal Structure Determination,and Magnetic Properties of a New Calcium Iron Iridium Hydrogarnet Ca3(Ir2–xFex)(FeO4)2–x(O4H4)1+x with 0 ≤ x ≤ 1

The new calcium iron iridium hydrogarnet Ca₃(Ir_2–xFe_x)(FeO₄)_2–x(H₄O₄)_1+x (0 ≤ x ≤ 1) was obtained by hydrothermal synthesis under strongly oxidizing alkaline conditions. The compound adopts a garnet‐like crystal structure and crystallizes in the acentric cubic space group I4 3d (no. 220) with a = 12.5396(6) Å determined at T = 100 K for a crystal with a refined composition Ca₃(Ir_1.4Fe_0.6)(FeO₄)_1.4(O₄H₄)_1.6. Iridium and iron statistically occupy the octahedrally coordinated metal position, the two crystallographically independent tetrahedral sites are partially occupied by iron. Hydroxide groups are found to cluster as hydrogarnet defects, i.e. partially substituting oxide anions around the empty tetrahedral metal sites. The presence of hydroxide ions was confirmed by infrared spectroscopy and the hydrogen content was quantified by carrier gas hot extraction; the overall composition was verified by energy dispersive X‐ray spectroscopy. The structure model is supported by ⁵⁷Fe‐Mössbauer spectroscopic data evidencing different Fe sites and a magnetic ordering of the octahedral iron sublattice at room temperature. The thermal decomposition proceeds via three steps of water loss and results in Ca₂Fe₂O₅, Fe₂O₃ and Ir. Mössbauer and magnetization data suggest magnetic order at ambient temperature with complex magnetic interactions.     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Perylene diimide‐modified magnetic γ‐Fe2O3/CeO2 nanoparticles as peroxidase mimics for highly sensitive colorimetric detection of Vitamin C

Perylene diimide‐modified magnetic γ‐Fe₂O₃/CeO₂ nanoparticles (γ‐Fe₂O₃/CeO₂‐PDI) were prepared and exhibited excellent peroxidase‐like activity. The samples were characterized by HR‐TEM, XRD, Raman, N₂ adsorption, magnetic strength and XPS. The obtained γ‐Fe₂O₃/CeO₂‐PDI had size of 10~20 nm with high specific surface area of 77 m²/g, and could be easily separated from the aqueous solution by using a magnet, which are in favor of its practical application. Due to the decoration of PDI, the γ‐Fe₂O₃/CeO₂‐PDI possessed more surface defects (Ce³⁺) and active oxygen species than that of γ‐Fe₂O₃/CeO₂, resulting in the outstanding catalytic performance. And the composite catalyst also showed highly sensitive and selectivity toward VC with a limit of detection of 0.45 μM. Based on the fluorescent results, a possible hydroxyl radical (?OH) catalytic mechanism was proposed. It is believed that the as‐prepared γ‐Fe₂O₃/CeO₂‐PDI nanoparticles are promising biosensors applied for biomedical and food analysis.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

A New Iron‐Based Carbon Monoxide Oxidation Catalyst: Structure–Activity Correlation

A new iron‐based catalyst for carbon monoxide oxidation, as a potential substitute for precious‐metal systems, has been prepared by using a facile impregnation method with iron tris‐acetylacetonate as a precursor on γ‐Al₂O₃. Light‐off and full conversion temperatures as low as 235 and 278 °C can be reached. However, the catalytic activity strongly depends on the loading; lower loadings perform better than higher ones. The different activities can be explained by variations of the structures formed. The structures are thoroughly characterized by a multimethodic approach by using X‐ray diffraction, Brunauer–Emmett–Teller surface areas, and Mössbauer spectroscopy combined with diffuse reflectance UV/Vis and X‐ray absorption spectroscopy. Consequently, isolated tetrahedrally coordinated Fe³⁺ centers and phases of AlFeO₃ are identified as structural requirements for high activity in the oxidation of carbon monoxide.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

Crystal structure and the magnetic properties of tris(2-chloromethyl-4-oxo-4H-pyran-5-olato-κ2O5,O4)iron(III)

The tris(2-chloromethyl-4-oxo-4H-pyran-5-olato-κ²O⁵,O⁴)iron(III), [Fe(kaCl)₃], has been synthesized and characterized by the crystal structure analysis, magnetic susceptibility measurements, Mössbauer, and EPR spectroscopic methods. The X-ray single crystal analysis of [Fe(kaCl)₃] revealed a mer isomer. The magnetic susceptibility measurements indicated the paramagnetic character in the temperature range of 2 K–298 K. The EPR and Mössbauer spectroscopy confirmed the presence of an iron center in a high-spin state. Additionally, the temperature-independent Mössbauer magnetic hyperfine interactions were observed down to 77 K. These interactions may result from spin–spin relaxation due to the interionic Fe³⁺ distances of 7.386 Å.     

Efficient Noble‐Metal‐Free γ‐Fe2O3@NiO Core–Shell Nanostructured Photocatalysts for Water Oxidation

Flowerlike noble‐metal‐free γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures have been fabricated and examined as a catalyst in the photocatalytic oxidation of water with [Ru(bpy)₃](ClO₄)₂ as a photosensitizer and Na₂S₂O₈ as a sacrificial electron acceptor. An apparent TOF of 0.29 μmols^?1 m^?2 and oxygen yield of 51 % were obtained with γ‐Fe₂O₃@NiO. The γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures could be easily separated from the reaction solution whilst maintaining excellent water‐oxidation activity in the fourth and fifth runs. The surface conditions of γ‐Fe₂O₃@NiO also remained unchanged after the photocatalytic reaction, as confirmed by X‐ray photoelectron spectroscopy (XPS).     

A simple solution route to control synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanomaterials at low temperature and their magnetic properties

A series of nanostructured iron compounds including cubic Fe₃O₄ and orthorhombic FeOOH were synthesized via a facile low temperature (in the range of 60?100°C) solution method. In the whole process, the interaction between FeCl₂·4H₂O and methenamine (C₆H₁₂N₄) was carried out through a reflux device under different reaction conditions such as temperature, solvent, and duration. The samples were detected by XRD, TEM, SAED, physical property measurement system, and Mössbauer spectroscopy, separately. The experiments showed that magnetic mixture nanoparticles had flake and rod morphologies, and cubic Fe₃O₄ took on grain nanostructure. Magnetism measurements indicated that the saturated magnetization of the as-obtained magnetic mixture was lower than that of the cubic magnetite. Mössbauer spectroscopy testified the sample consisting of cubic magnetite rather than γ-Fe₂O₃. In addition, a possible growth mechanism of cubic magnetic nanoparticles under different conditions was discussed.     

γ‐Fe2O3@Cu3Al‐LDH‐TUD as a new Amphoteric,Highly Efficient and Recyclable Heterogeneous Catalyst for the Solvent‐free Synthesis of Dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens

Thiourea dioxide was immobilized on γ‐Fe₂O₃@Cu₃Al‐LDH magnetic nanoparticles to prepare the γ‐Fe₂O₃@Cu₃Al‐LDH‐TUD MNPs. The structure and properties of these magnetic nanoparticles were established by FT‐IR, EDX, SEM, XRD, and hystogram of particle size analytical methods. The results obtained from these analytical methods confirmed the successful immobilization of the thiourea dioxide onto the magnetic support. The synthesized magnetic nanoparticles (MNPs) exhibited high catalytic activity in one‐pot three‐component reactions under mild and solvent‐free conditions for the synthesis of diverse ranges of dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens. All the reactions proceeded smoothly to furnish the respective products in excellent yields. Simple isolation of the products, avoidance of harmful organic solvents, versatility of the catalyst and its easy magnetic separation and reusability with no significant loss of activity are the main advantages of the present method.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.