Single step conversion of UO2 and U3U8 into uranyl sulphate solution

A direct and simple method for the conversion of UO₂ and U₃O₈ powder into uranyl sulphate solution is described, eliminating many tedious chemical steps. UO₂ and U₃O₈ are not soluble in concentrated or dilute sulphuric acid, as uranium in lower oxidation state does not react with sulphuric acid. However, nitric acid oxidizes uranium from lower valency to higher valency state, i.e., tetravalent to the hexavalent uranyl ion in solution. Sufficient amount of sulphuric acid present in the reaction mixture makes it possible for uranyl ions, formed by oxidation of nitric acid, to react with sulphuric acid forming uranyl sulphate.     

UO2, NpO2 and PuO2 preparation in aqueous nitrate solutions in the presence of hydrazine hydrate

It was established that heating to 90 °C of nitrate solutions of U, Np and Pu in the presence of hydrazine hydrate results in the formation of hydrated dioxides of these elements. On ignition under inert or reducing conditions in the temperature range of 280–800 °C hydrated uranium dioxide transmogrify into crystalline UO₂. On ignition in air atmosphere UO₂·nH₂O turns into UO₃ at 440 °C and into U₃O₈ at 570–800 °C. It was shown that thermolysis of the solution containing a mixture of uranium, neptunium and plutonium nitrates at 90 °C in the presence of hydrazine hydrate allows one to prepare hydrated dioxides (U, Np, Pu)O₂·nH₂O which on heating to ~300 °C transmogrify into crystalline product of UO₂, NpO₂ and PuO₂ solid solution. The technique of preparation of solid solutions of U and Pu dioxides is very promising as simple and effective method of production of MOX-fuel for.     

Binuclear Uranium(VI) Complexes with a “Pacman” Expanded Porphyrin: Computational Evidence for Highly Unusual Bis‐Actinyl Structures

On the basis of uranyl complexes reacting with a polypyrrolic ligand (H₄L), we explored structures and reaction energies of a series of new binuclear uranium(VI) complexes using relativistic density functional theory. Full geometry optimizations on [(UO₂)₂(L)], in which two uranyl groups were initially placed into the pacman ligand cavity, led to two minimum‐energy structures. These complexes with cation–cation interactions (CCI) exhibit unusual coordination modes of uranyls: one is a T‐shaped ( T ) skeleton formed by two linear uranyls {O_exo?U₂?O_endo→U₁(?O_exo)₂}, and another is a butterfly‐like ( B ) unit with one linear uranyl coordinating side‐by‐side to a second cis‐uranyl. The CCI in T was confirmed by the calculated longest distance and lowest stretching vibrational frequency of U₂?O_endo among the four U?O bonds. Isomer B is more stable than T , for which experimental tetrameric analogues are known. The formation of B and T complexes from the mononuclear [(UO₂)(H₂L)(thf)] ( M ) was found to be endothermic. The further protonation and dehydration of B and T are thermodynamically favorable. As a possible product, we have found a trianglelike binuclear uranium(VI) complex having a O?U?O?U?O unit.     

Determination of trace level impurities in uranium compounds by ICP-AES after organic extraction

The determination was studied of Al, B, Be, Cd, Ca, Co, Cu, Mg, Mn, Mo, Pb, Si, Sn, V, Cr, Ni, and Fe as trace level impurities in uranium compounds by ICP-AES after extraction of uranium with three different mixtures of di-(2-ethyl-hexyl) phosphate (D2EHP) and tri-(2-ethyl-hexyl)-phosphate (T2EHP) in solvents like toluene, carbon tetrachloride, hexane and cyclohexane. The study was carried out in presence of different concentrations of HCl and HNO₃. A single extraction with D2EHP in cyclohexane using nitric acid as matrix was sufficient to reduce the U₃O₈ concentration from 100 g/l to 100 g/ml. The ICP-AES instrumentation applied, allowed the determination of metal concentrations ten-times lower than those usually found in nuclear grade U₃O₈. To check the efficiency of the extraction and the accuracy of the proposed method, Certified Reference Materials were used in the dissolution and extraction steps. The method described can be used for the determination of trace metals in nuclear grade U₃O₈.     

低浓缩铀靶辐照后溶液中铀的化学种态及主要裂变元素的影响

利用化学种态分析软件CHEMSPEC计算了低浓缩铀靶辐照后溶液中铀(U)的化学种态分布及其主要裂变元素对U化学种态的影响。结果表明,在单组分体系中,pH值和铀酰浓度都会显著影响U的化学种态分布。随着铀酰浓度的增大,溶液中将会生成多核配合物;在较高的NO₃^-浓度下,U在溶液中主要以UO₂²⁺和UO₂NO³⁺的形式存在。CO₂对不同浓度铀的种态分布影响结果表明,当铀酰浓度较低时,铀的化学种态多以碳酸铀酰的形式存在;当铀酰浓度较高时,铀的化学种态多以氢氧铀酰或柱铀矿沉淀的形式存在。计算发现,当裂片元素Tc、I、Mo的浓度小于0.01mol·L^-1并分别以TcO₄^-、I^-、MoO₄^2-的种态存在时,这些裂片元素不改变铀的各化学种态的分布。     

Template‐Free Synthesis and Mechanistic Study of Porous Three‐Dimensional Hierarchical Uranium‐Containing and Uranium Oxide Microspheres

A novel type of uranium‐containing microspheres with an urchin‐like hierarchical nano/microstructure has been successfully synthesized by a facile template‐free hydrothermal method with uranyl nitrate hexahydrate, urea, and glycerol as the uranium source, precipitating agent, and shape‐controlling agent, respectively. The as‐synthesized microspheres were usually a few micrometers in size and porous inside, and their shells were composed of nanoscale rod‐shaped crystals. The growth mechanism of the hydrothermal reaction was studied, revealing that temperature, ratios of reactants, solution pH, and reaction time were all critical for the growth. The mechanism study also revealed that an intermediate compound of 3 UO₃?NH₃?5 H₂O was first formed and then gradually converted into the final hydrothermal product. These uranium‐containing microspheres were excellent precursors to synthesize porous uranium oxide microspheres. With a suitable calcination temperature, very uniform microspheres of uranium oxides (UO_2+x, U₃O₈, and UO₃) were successfully synthesized.     

Oxo–Group‐14‐Element Bond Formation in Binuclear Uranium(V) Pacman Complexes

Simple and versatile routes to the functionalization of uranyl‐derived U^V–oxo groups are presented. The oxo‐lithiated, binuclear uranium(V)–oxo complexes [{(py)₃LiOUO}₂(L)] and [{(py)₃LiOUO}(OUOSiMe₃)(L)] were prepared by the direct combination of the uranyl(VI) silylamide “ate” complex [Li(py)₂][(OUO)(N”)₃] (N”=N(SiMe₃)₂) with the polypyrrolic macrocycle H₄L or the mononuclear uranyl (VI) Pacman complex [UO₂(py)(H₂L)], respectively. These oxo‐metalated complexes display distinct U? O single and multiple bonding patterns and an axial/equatorial arrangement of oxo ligands. Their ready availability allows the direct functionalization of the uranyl oxo group leading to the binuclear uranium(V) oxo–stannylated complexes [{(R₃Sn)OUO}₂(L)] (R=nBu, Ph), which represent rare examples of mixed uranium/tin complexes. Also, uranium–oxo‐group exchange occurred in reactions with [TiCl(OiPr)₃] to form U‐O? C bonds [{(py)₃LiOUO}(OUOiPr)(L)] and [(iPrOUO)₂(L)]. Overall, these represent the first family of uranium(V) complexes that are oxo‐functionalised by Group 14 elements.     

Hexavalent uranium dicarboxylates with hydrazine. Preparation,characterization and thermal studies

The uranium complexes of composition,UO₂X⋅N₂H₄⋅H₂O, X=succinate or glutarate, UO₂X₂⋅N₂H₄⋅H₂O, X=Hadipate, Hpimelate, Hsuberate, Hazelate and Hsebacate and UO₂X⋅N₂H₄, where X=malate and oxydiacetate have been prepared and characterized by analytical, spectral (IR and electronic), thermal and X-ray powder diffraction studies. Hydrazine acts as a monodentate ligand in uranyl succinate, glutarate, malate and oxydiacetate hydrazinates and bidentate in uranyl adipate, pimelate, suberate, azelate and sebacate hydrazinate hydrate complexes. The dicarboxylate anions bind the uranium through uni- and bidentate fashion depending upon the coordination polyhedra. All the dicarboxylate hydrazinate complexes in this series decompose to give U₃O₈ as the end product through their respective uranyl dicarboxylate intermediates. Malate and oxydiacetate compounds decompose exothermically in a single step. The coordinated water is confirmed from thermal data. The complexes of succinate to sebacate seem to possess hexagonal bipyramidal geometry around uranium, whereas pentagonal bipyramidal geometry has been proposed for both malate and oxydiacetate complexes. This revised version was published online in August 2006 with corrections to the Cover Date.     

低浓缩铀靶辐照后溶液中铀的化学种态及主要裂变元素的影响

利用化学种态分析软件CHEMSPEC计算了低浓缩铀靶辐照后溶液中铀(U)的化学种态分布及其主要裂变元素对U化学种态的影响。结果表明,在单组分体系中,pH值和铀酰浓度都会显著影响U的化学种态分布。随着铀酰浓度的增大,溶液中将会生成多核配合物;在较高的NO₃^-浓度下,U在溶液中主要以UO₂²⁺和UO₂NO₃⁺的形式存在。CO₂对不同浓度铀的种态分布影响结果表明,当铀酰浓度较低时,铀的化学种态多以碳酸铀酰的形式存在;当铀酰浓度较高时,铀的化学种态多以氢氧铀酰或柱铀矿沉淀的形式存在。计算发现,当裂片元素Tc、I、Mo的浓度小于0.01 mol·L^-1并分别以TcO₄^-、I^-、MoO₄^2-的种态存在时,这些裂片元素不改变铀的各化学种态的分布。     

Ligand-Supported Facile Conversion of Uranyl(VI) into Uranium(IV) in Organic and Aqueous Media

Reduction of uranyl(VI) to U^V and to U^IV is important in uranium environmental migration and remediation processes. The anaerobic reduction of a uranyl U^VI complex supported by a picolinate ligand in both organic and aqueous media is presented. The [U^VIO₂(dpaea)] complex is readily converted into the cis-boroxide U^IV species via diborane-mediated reductive functionalization in organic media. Remarkably, in aqueous media the uranyl(VI) complex is rapidly converted, by Na₂S₂O₄, a reductant relevant for chemical remediation processes, into the stable uranyl(V) analogue, which is then slowly reduced to yield a water-insoluble trinuclear U^IV oxo-hydroxo cluster. This report provides the first example of direct conversion of a uranyl(VI) compound into a well-defined molecular U^IV species in aqueous conditions.     

Ligand‐Supported Facile Conversion of Uranyl(VI) into Uranium(IV) in Organic and Aqueous Media

Reduction of uranyl(VI) to U^V and to U^IV is important in uranium environmental migration and remediation processes. The anaerobic reduction of a uranyl U^VI complex supported by a picolinate ligand in both organic and aqueous media is presented. The [U^VIO₂(dpaea)] complex is readily converted into the cis‐boroxide U^IV species via diborane‐mediated reductive functionalization in organic media. Remarkably, in aqueous media the uranyl(VI) complex is rapidly converted, by Na₂S₂O₄, a reductant relevant for chemical remediation processes, into the stable uranyl(V) analogue, which is then slowly reduced to yield a water‐insoluble trinuclear U^IV oxo‐hydroxo cluster. This report provides the first example of direct conversion of a uranyl(VI) compound into a well‐defined molecular U^IV species in aqueous conditions.     

Analytical applications of a differential technique in laser-induced fluorimetry: accurate and precise determination of uranium in concentrates and for designing microchemielectronic devices for on-line determination in processing industries

A novel instrumental technique for the direct, fast, accurate, and precise determination of uranium in concentrates and other U-rich materials (as well as to mineralized rocks) is presented. The proposed technique is an absolute methodology, based on the comparison of the fluorescence of the accurately known standard with a sample of similar but unknown concentration in the low operational range of the instrument (on same sample-dilution basis), by the use of H₃PO₄-NH₄H₂PO₄ as a fluorescence-enhancing reagent. The relative standard deviation of the proposed technique was 0.5-0.9% (n=9) at 18.1, 36.2, 61.2, and 99.6% U₃O₈. The proposed technique is suitable for the determination of uranium in samples arising from exploration projects, ores from mining operations, mill process samples, uranium ore concentrates leading to fuel fabrication as well as samples from environmental monitoring containing up to 100% uranium. The results are in good agreement with those obtained by titrimetric, gravimetric, and TBP extraction-H₂O₂ spectrophotometric methods. The precision of the technique is within the acceptable ‘pure geochemistry’ type of analysis (R.S.D. ∼ 1.0%) and is comparable even those obtained with titrimetric and gravimetric assay. The proposed differential technique coupled with flow injection may open up new advancement in instrumentation leading to design and development of microchemielectronic devices for direct on-line determination, more compatible with the tools of computer age as also to help in handling of radioactive solutions in chemical laboratories in uranium processing industries.     

Solid phase separation and ICP-OES/ICP-MS determination of rare earth impurities in nuclear grade uranium oxide

A simple, effective and low cost solid phase extraction procedure was standardized for the trace and ultra-trace level determination of rare earth impurities, such as, Ce, Dy, Sm, Gd, Eu, Er etc. which act as neutron poisons, in nuclear grade uranium oxide (U₃O₈?>?99.9% by weight). The method involves selective separation of these elements as their fluorides with the help of activated charcoal from major uranium matrix followed by determination by ICP-MS and high resolution ICP-OES. The residual uranium content of the solution was <10???g/mL. The recovery of REEs ranges from 85 to 105%. The method was validated with nuclear grade uranium oxide standards CRM-I to CRM-V (BARC, Mumbai, India) in addition to some synthetic standards. The RSD of the method was ±12% (n?=?3).     

Thermal decomposition of ammonium uranates precipitated from uranyl nitrate solution with ammonium hydroxide

Thermal decomposition of ammonium uranates precipitated from uranyl nitrate solutions on addition of aqueous ammonium hydroxide under various conditions has been examined by thermogravimetry (TG), differential thermal analysis (DTA), infrared spectroscopy and X-ray diffraction study. The TG curves of all precipitates show the weight-loss corresponding to the calculated value as UO₃·NH₃·H₂O. The DTA curves of the precipitates give the endotherms at about 130, 210 and 590 °C and the exotherms at 340–420 °C. As a result, it is found that ammonium uranates thermally decompose to amorphous UO₃ at about 400 °C, and transform to U₃O₈ via β-UO₃.     

Development of a pH titration method for the simultaneous determination of uranium,nitrate and free-acid in the feed solution of the sol-gel process of nuclear fuel fabrication

pH titration curves generated by slow addition of alkali to solutions containing varying concentrations of uranyl nitrate and nitric acid were studied using an autotitrator linked to a personal computer. A procedure with multiple choice of equations has been developed for the estimation of free acid, nitrate and uranium in pure uranyl nitrate solution by a single titration. The technique provides a simple single-step method with required accuracy and precision for the simultaneous estimation of the three quantities in the uranyl nitrate feed solution of the sol-gel process for making UO₃ microspheres. The relative standard deviations in the determination of uranium and nitrate were ±0.82% and ±1.52%, respectively, in 15 determinations.     

A gravimetric and an X-ray fluorescence method for the determination of rubidium in Rb2U(SO4)3

Chemical characterization of rubidium uranium(IV) trisulfate, Rb₂U(SO₄)₃, a new chemical assay standard for uranium requires accurate analysis of rubidium. A gravimetric and an X-ray fluorescence method (XRF) for the determination of rubidium in this compound are described. In the gravimetric method, rubidium is determined as Rb₂Na[Co(NO₂)₆].H₂O without separating uranium with a precision of the order of ±0.5%. In the XRF method, the concentration ratio of rubidium to uranium, C_Rb/C_U, is determined in the solid samples by the binary ratio method using calibration between intensity ratios (I_Rb/I_U) and concentration ratios (C_Rb/C_U). The concentration of rubidium is derived using the uranium value which is known with a precision better than ±0.05%. The XRF method has a precision better than ±0.8% for rubidium determination.     

An overview of studies on the highly dispersed uranium oxide species occluded within mesoporous MCM-41 and MCM-48 host materials

In this article we have consolidated our recent studies on anchoring of uranyl groups and encapsulation of highly dispersed nano-particles of -U₃O₈ in mesoporous MCM samples. The size of uranium oxide crystallites and the binding of uranyl groups at framework sites of host matrix depended on the preparation method, viz. wet impregnation, exchange of template cations, and the hydrothermal route. These uranium species contributed individually to the catalytic oxidation of organic molecules, such as methanol, toluene and benzyl alcohol; the uranyl groups playing a more important role at lower reaction temperatures. Also, the size and the lattice oxygen of uranium oxide crystallites played a vital role, not only in the lowering of reaction onset temperature but also in deciding the nature and the reactivity of the transient surface species formed during the oxidation of above mentioned organics. For instance, the results of in situ IR spectroscopy experiments have shown that while larger-size U₃O₈ crystallites help in the growth of certain oxymethylene (–OCH₂) and polymerized oxymethylene (–OCH₂)_n species, adsorption of methanol on smaller size particles helped in the additional formation of formate-type complexes. Thus, a relationship was found between the size of uranium oxide crystallites, the nature of the transient species formed and the catalytic conversion of methanol to form CO₂, CO and methane. In addition, the uranyl ions anchored within the pore system of host matrix are found to serve as efficient heterogeneous photocatalysts for the sunlight-assisted deep oxidation of organic molecules in the vapor phase and at room temperature. The reaction mechanisms, accounting for the catalytic properties of occluded UO_x species without and in the presence of radiation, are discussed in the light of the above mentioned results.     

Gravimetric determination of uranyl ion with 2-hydroxy-1-naphthaldehyde /2H-1N/

The precipitation of uranyl ion with 2-hydroxy-1-naphthaldehyde /2H–1N=HL/ was studied. The solid complex /orange crystals/ was characterized by IR, UV-Vis spectra. Uranium was determined as U₃O₈ after calcination of the complex at 850°C /37.78% U experimental, 36.64% U calculated for C₂₂H₁₄O₆U, UO₂L₂/. Using a statistical experimental design, the best conditions for quantitative precipitation were obtained. A gravimetric method for the determination of UO ₂ ²⁺ is proposed by weighing the complex after drying at 110°C.On leave from Instituto de Química, U.N.A.M.     

The determination of bound nitrogen in uranium hexafluoride with an ammonia electrode

Uranium hexafluoride reacts with nitrosyl fluoride (NOF), nitryl fluoride (NO₂F), and nitrogen oxides to form solid compounds such as nitrosyl heptafluorouranate (NOUF₇) and nitryl heptafluorouranate (NO₂UF₇). Since these compounds are undesirable impurities in uranium hexafluoride, a method has been developed for the determination of these nitrogen oxyfluorides in uranium hexafluoride. Uranium hexafluoride is hydrolyzed in a potassium permanganate solution which converts the uranium hexafluoride to uranyl fluoride and the nitrogen oxyfluorides to nitric acid. The nitrate is reduced with aluminum powder to ammonia, which is then measured with an ammonia electrode in a basic solution. The method is relatively interference-free because the electrode is a gas-sensing device. The detection limit is 0.8 μg bound N/g U, and the precision at 3 μg bound N/g U is ± 16%.     

Analytical application of embelin

Summary Embelin is reported as a new reagent for gravimetric estimation of (1) uranium in pure solutions at p_H 6.0–6.5 and (2) thorium in acid solutions of 0.4 N HCl. In both cases, the precipitates were ignited and weighed as U₃O₈ and ThO₂. The separation of thorium from large excess of uranium and rare earths could also be effected employing this reagent. In addition, Cu, Cd, Ca, Ba, Sr, Al, Be, Mn, Mg and Zn do not interfere.