Detection of LAMP Products Using CNT Array Electrode

We described here a novel strategy for discriminating target gene by integrating loop‐mediated isothermal amplification (LAMP) and differential pulse voltammetry (DPV). After a successful LAMP reaction, the anodic peak current (i_pa) of the free 2′‐deoxyguanosine 5′‐triphosphate (dGTP) decreased remarkably at a carbon nanotubes array working electrode, owing to the consumption of free dGTP as one of reactive substrates. Thus, the change of current response was used to characterize the result of LAMP reaction. And hence the presence of the target gene in template DNA could be discriminated easily. The malB gene extracted from Escherichia coli cells was tested as a model. After the reaction for 30 min, the LAMP mix was scanned directly. Then the information of the target gene in 0.8 picogram template DNA was obtained accurately. The result was in good accordance with that obtained with optical‐based methods (gel electrophoresis and fluorescent dye). The new strategy has the advantages of being very simple to perform, rapid response, elimination of post‐amplification processing, avoidance of auxiliary reagents and low cost (there was almost no cost for the detection step). Therefore, it was quite promising for use in miniaturized devices and in the development of point‐of‐care applications.     

Synthesis of (2′S)‐2′‐Deoxy‐2′‐C‐methylpurine Nucleosides and Their Phosphoramidites

We describe the stereoselective synthesis of (2′S)‐2′‐deoxy‐2′‐C‐methyladenosine ( 12 ) and (2′S)‐2′‐deoxy‐2′‐C‐methylinosine ( 14 ) as well as their corresponding cyanoethyl phosphoramidites 16 and 19 from 6‐O‐(2,6‐dichlorophenyl)inosine as starting material. The methyl group at the 2′‐position was introduced via a Wittig reaction (→ 3 , Scheme 1) followed by a stereoselective oxidation with OsO₄ (→ 4 , Scheme 2). The primary‐alcohol moiety of 4 was tosylated (→ 5 ) and regioselectively reduced with NaBH₄ (→ 6 ). Subsequent reduction of the 2′‐alcohol moiety with Bu₃SnH yielded stereoselectively the corresponding (2′S)‐2′‐deoxy‐2′‐C‐methylnucleoside (→ 8a ).     

Packing effects in 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine

Structure analyses of 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₄N₂O₂, (I), and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₂Br₂N₂, (II), reveal intermolecular hydrogen bonding in both compounds. For (I), O—H·N intermolecular hydrogen bonding leads to the formation of an infinite two‐dimensional polymer, and π stacking interactions are also observed. For (II), C—H·N intermolecular hydrogen bonding leads to the formation of a zigzag polymer. The two compounds crystallize in different crystal systems, but both mol­ecules possess C_i symmetry, with one half mol­ecule in the asymmetric unit.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Photophysical and Duplex‐DNA‐Binding Properties of Distamycin Dimers Based on 4,4′‐ and 2,2′‐Dialkoxyazobenzenes as the Core

Distamycin‐based tetrapeptide ( 1 ) was covalently tethered to both ends of the central dihydroxyazobenzene moiety at either the 2,2′ or 4,4′ positions. This afforded two isomeric, distamycin–azobenzene–distamycin systems, 2 (para) and 3 (ortho), both of them being photoisomerizable. Illumination of these conjugates in solution at approximately 360 nm induced photoisomerization and the time course of the process was followed by UV/Vis and ¹H NMR spectroscopy. The kinetics of the thermal reversion at various temperatures of cis to trans isomers of the conjugates obtained after photoillumination were also examined. This afforded the respective thermal‐activation parameters. Both the molecular architecture and the location of the substituent around the core azobenzene determined the rate and activation‐energy barrier for the cis‐to‐trans back‐isomerization of these conjugates in solution. Duplex–DNA binding of the conjugates and the changes in DNA‐binding efficiency upon photoisomerization was also examined by CD spectroscopy, thermal denaturation studies, and a Hoechst displacement assay. The conjugate 2 showed higher DNA‐binding affinity and a greater change in the DNA‐binding efficiency upon photoisomerization compared with its 2,2′‐disubstituted counterpart. The experimental findings were substantiated by using molecular‐docking studies involving each conjugate with a model duplex d[(GC(AT)₁₀CG)]₂ DNA molecule.     

Factors Affecting DNA–DNA Interstrand Cross‐Links in the Antiparallel 3′–3′ Sense: A Comparison with the 5′–5′ Directional Isomer

Reported herein is a study of the unusual 3′–3′ 1,4‐GG interstrand cross‐link (IXL) formation in duplex DNA by a series of polynuclear platinum anticancer complexes. To examine the effect of possible preassociation through charge and hydrogen‐bonding effects the closely related compounds [{trans‐PtCl(NH₃)₂}₂(μ‐trans‐Pt(NH₃)₂{NH₂(CH₂)₆NH₂}₂)]⁴⁺ (BBR3464, 1 ), [{trans‐PtCl(NH₃)₂}₂(μ‐NH₂(CH₂)₆NH₂)]²⁺ (BBR3005, 2 ), [{trans‐PtCl(NH₃)₂}₂(μ‐H₂N(CH₂)₃NH₂(CH₂)₄)]³⁺ (BBR3571, 3 ) and [{trans‐PtCl(NH₃)₂}₂{μ‐H₂N(CH₂)₃‐N(COCF₃)(CH₂)₄}]²⁺ (BBR3571‐COCF₃, 4 ) were studied. Two different molecular biology approaches were used to investigate the effect of DNA template upon IXL formation in synthetic 20‐base‐pair duplexes. In the “hybridisation directed” method the monofunctionally adducted top strands were hybridised with their complementary 5′‐end labelled strands; after 24 h the efficiency of interstrand cross‐linking in the 5′–5′ direction was slightly higher than in the 3′–3′ direction. The second method involved “postsynthetic modification” of the intact duplex; significantly less cross‐linking was observed, but again a slight preference for the 5′–5′ duplex was present. 2D [¹H, ¹⁵N] HSQC NMR spectroscopy studies of the reaction of [¹⁵N]‐ 1 with the sequence 5′‐d{TATACATGTATA}₂ allowed direct comparison of the stepwise formation of the 3′–3′ IXL with the previously studied 5′–5′ IXL on the analogous sequence 5′‐d(ATATGTACATAT)₂. Whereas the preassociation and aquation steps were similar, differences were evident at the monofunctional binding step. The reaction did not yield a single distinct 3′–3′ 1,4‐GG IXL, but numerous cross‐linked adducts formed. Similar results were found for the reaction with the dinuclear [¹⁵N]‐ 2 . Molecular dynamics simulations for the 3′–3′ IXLs formed by both 1 and 2 showed a highly distorted structure with evident fraying of the end base pairs and considerable widening of the minor groove.     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

N2‐Substituted 2′‐Deoxyguanosine Triphosphate Derivatives as Selective Substrates for Human DNA Polymerase κ

N²‐Alkyl‐2′‐deoxyguanosine triphosphate (N²‐alkyl‐dGTP) derivatives with methyl, butyl, benzyl, or 4‐ethynylbenzyl substituents were prepared and tested as substrates for human DNA polymerases. N²‐Benzyl‐dGTP was equal to dGTP as a substrate for DNA polymerase κ (pol κ), but was a poor substrate for pols β, δ, η, ι, or ν. In vivo reactivity was evaluated through incubation of N²‐4‐ethynylbenzyl‐dG with wild‐type and pol κ deficient mouse embryonic fibroblasts. CuAAC reaction with 5(6)‐FAM‐azide demonstrated that only cells containing pol κ were able to incorporate N²‐4‐ethynylbenzyl‐dG into the nucleus. This is the first instance of a Y‐family‐polymerase‐specific dNTP, and this method could be used to probe the activity of pol κ in vivo.     

Novel hydrazone derivatives of 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde

The structures of new oxaindane spiropyrans derived from 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde (SP1), namely N‐benzyl‐2‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]hydrazinecarbothioamide, C₂₇H₂₅N₃O₃S, (I), at 120 (2) K, and N′‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]‐4‐methylbenzohydrazide acetone monosolvate, C₂₇H₂₄N₂O₄·C₃H₆O, (II), at 100 (2) K, are reported. The photochromically active C_spiro—O bond length in (I) is close to that in the parent compound (SP1), and in (II) it is shorter. In (I), centrosymmetric pairs of molecules are bound by two equivalent N—H...S hydrogen bonds, forming an eight‐membered ring with two donors and two acceptors.     

Flip‐type disorder in 3‐substituted 2,2′:5′,2′′‐terthiophenes

In the crystal structures of four thiophene derivatives, (E)‐3′‐[2‐(anthracen‐9‐yl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₈H₁₈S₃, (E)‐3′‐[2‐(1‐pyrenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₃₀H₁₈S₃, (E)‐3′‐[2‐(3,4‐dimethoxyphenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₂H₁₈O₂S₃, and (E,E)‐1,4‐bis[2‐(2,2′:5′,2′′‐terthiophen‐3′‐yl)ethenyl]‐2,5‐dimethoxybenzene, C₃₆H₂₆O₂S₆, at least one of the terminal thiophene rings is disordered and the disorder is of the flip type. The terthiophene fragments are far from being coplanar, contrary to terthiophene itself. The central C—C=C—C fragments are almost planar but the bond lengths suggest slight delocalization within this fragment. The crystal packing is determined by van der Waals interactions and some weak, relatively short, C—H...S and C—H...π directional contacts.     

Regio‐ and stereospecific assembly of dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidines] from simple precursors using a one‐pot procedure: synthesis,spectroscopic and structural characterization,and a proposed mechanism of formation

The synthesis and characterization of three new dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine] compounds are reported, together with the crystal structures of two of them. (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐Chlorophenyl)‐1‐hexyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₈H₃₀ClN₃O₂S₂, (I), (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐1‐benzyl‐5‐methyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₃₀H₂₆ClN₃O₂S₂, (II), and (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐5‐fluoro‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₂H₁₇ClFN₃O₂S₂, (III), were each isolated as a single regioisomer using a one‐pot reaction involving l ‐proline, a substituted isatin and (Z)‐5‐(4‐chlorobenzylidene)‐2‐sulfanylidenethiazolidin‐4‐one [5‐(4‐chlorobenzylidene)rhodanine]. The compositions of (I)–(III) were established by elemental analysis, complemented by high‐resolution mass spectrometry in the case of (I); their constitutions, including the definition of the regiochemistry, were established using NMR spectroscopy, and the relative configurations at the four stereogenic centres were established using single‐crystal X‐ray structure analysis. A possible reaction mechanism for the formation of (I)–(III) is proposed, based on the detailed stereochemistry. The molecules of (I) are linked into simple chains by a single N—H…N hydrogen bond, those of (II) are linked into a chain of rings by a combination of N—H…O and C—H…S=C hydrogen bonds, and those of (III) are linked into sheets by a combination of N—H…N and N—H…S=C hydrogen bonds.     

Oligodeoxynucleotide Duplexes Containing (5′S)‐5′‐C‐Alkyl‐Modified 2′‐Deoxynucleosides: Can an Alkyl Zipper across the DNA Minor‐Groove Enhance Duplex Stability?

A series of oligonucleotides containing (5′S)‐5′‐C‐butyl‐ and (5′S)‐5′‐C‐isopentyl‐substituted 2′‐deoxyribonucleosides were designed, prepared, and characterized with the intention to explore alkyl‐zipper formation between opposing alkyl chains across the minor groove of oligonucleotide duplexes as a means to modulate DNA‐duplex stability. From four possible arrangements of the alkyl groups that differ in the density of packing of the alkyl chains across the minor groove, three (duplex types I – III , Fig. 2) could experimentally be realized and their duplex‐forming properties analyzed by UV‐melting curves, CD spectroscopy, and isothermal titration calorimetry (ITC), as well as by molecular modeling. The results show that all arrangements of alkyl residues within the minor groove of DNA are thermally destabilizing by 1.5–3°/modification in T_m. We found that, within the proposed duplexes with more loosely packed alkyl groups (type‐ III duplexes), accommodation of alkyl residues without extended distorsion of the helical parameters of B‐DNA is possible but does not lead to higher thermodynamic stability. The more densely packed and more unevenly distributed arrangement (type‐ II duplexes) seems to suffer from ecliptic positioning of opposite alkyl groups, which might account for a systematic negative contribution to stability due to steric interactions. The decreased stability in the type‐ III duplexes described here may be due either to missing hydrophobic interactions of the alkyl groups (not bulky enough to make close contacts), or to an overcompensation of favorable alkyl‐zipper formation presumably by loss of structured H₂O in the minor groove.     

(2′‐O‐Methyl‐RNA)‐3′‐PNA Chimeras: A New Class of Mixed Backbone Oligonucleotide Analogues with High Binding Affinity to RNA

The automated on‐line synthesis of DNA‐3′‐PNA chimeras 1 – 4 and (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras 5 – 8 is described, in which the 3′‐terminal part of the oligonucleotide is linked to the N‐terminal part of the PNA via N‐(ω‐hydroxyalkyl)‐N‐[(thymin‐1‐yl)acetyl]glycine units (alkyl=Et, Ph, Bu, and pentyl). By means of UV thermal denaturation, the binding affinities of all chimeras were directly compared by determining their T_m values in the duplex with complementary DNA and RNA. All investigated DNA‐3′‐PNA chimeras and (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras form more‐stable duplexes with complementary DNA and RNA than the corresponding unmodified DNA. Interestingly, a N‐(3‐hydroxypropyl)glycine linker resulted in the highest binding affinity for DNA‐3′‐PNA chimeras, whereas the (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras showed optimal binding with the homologous N‐(4‐hydroxybutyl)glycine linker. The duplexes of (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras and RNA were significantly more stable than those containing the corresponding DNA‐3′‐PNA chimeras. Surprisingly, we found that the charged (2′‐O‐methyl‐RNA)‐3′‐PNA chimera with a N‐(4‐hydroxybutyl)glycine‐based unit at the junction to the PNA part shows the same binding affinity to RNA as uncharged PNA. Potential applications of (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras include their use as antisense agents acting by a RNase‐independent mechanism of action, a prerequisite for antisense‐oligonucleotide‐mediated correction of aberrant splicing of pre‐mRNA.     

7‐Halogenated 7‐Deazapurine 2′‐Deoxyribonucleosides Related to 2′‐Deoxyadenosine, 2′‐Deoxyxanthosine,and 2′‐Deoxyisoguanosine: Syntheses and Properties

A series of 7‐fluorinated 7‐deazapurine 2′‐deoxyribonucleosides related to 2′‐deoxyadenosine, 2′‐deoxyxanthosine, and 2′‐deoxyisoguanosine as well as intermediates 4b – 7b, 8, 9b, 10b , and 17b were synthesized. The 7‐fluoro substituent was introduced in 2,6‐dichloro‐7‐deaza‐9H‐purine ( 11a ) with Selectfluor (Scheme 1). Apart from 2,6‐dichloro‐7‐fluoro‐7‐deaza‐9H‐purine ( 11b ), the 7‐chloro compound 11c was formed as by‐product. The mixture 11b / 11c was used for the glycosylation reaction; the separation of the 7‐fluoro from the 7‐chloro compound was performed on the level of the unprotected nucleosides. Other halogen substituents were introduced with N‐halogenosuccinimides ( 11a → 11c – 11e ). Nucleobase‐anion glycosylation afforded the nucleoside intermediates 13a – 13e (Scheme 2). The 7‐fluoro‐ and the 7‐chloro‐7‐deaza‐2′‐deoxyxanthosines, 5b and 5c , respectively, were obtained from the corresponding MeO compounds 17b and 17c , or 18 (Scheme 6). The 2′‐deoxyisoguanosine derivative 4b was prepared from 2‐chloro‐7‐fluoro‐7‐deaza‐2′‐deoxyadenosine 6b via a photochemically induced nucleophilic displacement reaction (Scheme 5). The pK_a values of the halogenated nucleosides were determined (Table 3). ¹³C‐NMR Chemical‐shift dependencies of C(7), C(5), and C(8) were related to the electronegativity of the 7‐halogen substituents (Fig. 3). In aqueous solution, 7‐halogenated 2′‐deoxyribonucleosides show an approximately 70% S population (Fig. 2 and Table 1).     

Optically Active Helical Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl]: New Ligand for Asymmetric Addition of Diethylzinc to Aryl Aldehyde

Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl] (L*) was obtained by taking off the protecting groups of poly[(S)‐3‐vinyl‐2,2′‐bis(methoxymethoxy)‐1,1′‐binaphthyl] (poly‐ 1 ). L* was proved to keep a stable helical conformation in solution. The application of helical L* in the asymmetric addition of diethylzinc to aldehydes has been studied. The catalytic system employing 10 mol% of L* and 150 mol% of Ti(OⁱPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes, giving up to 99% enantiomeric excess (ee) and up to 93% yield of the corresponding secondary alcohol at 0°C. The chiral polymer can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Synthesis of 3′‐Thioamido‐Modified 3′‐Deoxythymidine 5′‐Triphosphates by Regioselective Thionation and Their Use as Chain Terminators in DNA Sequencing

The thioamide derivatives 3′‐deoxy‐5′‐O‐(4,4′‐dimethoxytrityl)‐3′‐[(2‐methyl‐1‐thioxopropyl)amino]thymidine ( 4a ) and 3′‐deoxy‐5′‐O‐(4,4′‐dimethoxytrityl)‐3′‐{{6‐{[(9H‐(fluoren‐9‐ylmethoxy)carbonyl]amino}‐1‐thioxohexyl}amino}thymidine ( 4b ) were synthesized by regioselective thionation of the corresponding amides 3a and 3b with 2,4‐bis(4‐methoxyphenyl)‐1,3,2,4‐dithiadiphosphetane 2,4‐disulfide (Lawesson's reagent). The addition of exact amounts of pyridine to the reaction mixture proved to be essential for an efficient transformation. The thioamides were converted into the corresponding 5′‐triphosphates 6a and 6b . Compound 6a was chosen for DNA sequencing experiments, and 6b was further labelled with fluorescein (→ 8 ).     

3′‐Deoxyribopyranose (4′→2′)‐Oligonucleotide Duplexes (=p‐DNA Duplexes) as Substitutes of RNA Hairpin Structures

By automated synthesis, we prepared hybrid oligonucleotides consisting of covalently linked RNA and p‐DNA sequences (p‐DNA=3′‐deoxyribopyranose (4′→2′)‐oligonucleotides) (see Table 1). The pairing properties of corresponding hybrid duplexes, formed from fully complementary single strands were investigated. An uninterrupted π‐π‐stacking at the p‐DNA/RNA interface and cooperative pairing between the two systems was achieved by connecting them via a 4′‐p‐DNA‐2′→5′‐RNA‐3′ and 5′‐RNA‐2′→4′‐p‐DNA‐2′ phosphodiester linkage, respectively (see Fig. 4). The RNA 2′‐phosphoramidites 9 – 12 , required for the formation of the RNA‐2′→4′‐p‐DNA phosphodiester linkage were synthesized from the corresponding, 3′‐O‐tom‐protected ribonucleosides (tom=[(triisopropylsilyl)oxy]methyl; Scheme 1). Analogues of the flavin mononucleotide (=FMN) binding aptamer 22 and the hammerhead ribozyme 25 were prepared. Each of these analogues consisted of two p‐DNA/RNA hybrid single strands with complementary p‐DNA sequences, designed to substitute stem/loop and stem motifs within the parent compounds. By comparative binding and cleavage studies, it was found that mixing of the two complementary p‐DNA/RNA hybrid sequences resulted in the formation of the fully functional analogues 23 ⋅ 24 and 27 ⋅ 28 of the FMN‐binding aptamer and of the hammerhead ribozyme, respectively.     

A 4′‐(4‐carboxyphenyl)‐3,2′:6′,3′′‐terpyridine‐based luminescent cadmium(II) coordination polymer for the detection of 2,4,6‐trinitrophenol

The title coordination polymer, poly[bis[μ3‐4‐(3,2′:6′,3′′‐terpyridin‐4′‐yl)benzoato]cadmium(II)], [Cd(C₂₂H₁₄N₃O₂)₂]_n or [Cd(3‐cptpy)₂]_n, (I), has been synthesized solvothermally and characterized by IR spectroscopy, thermogravimetric analysis, and single‐crystal and powder X‐ray diffraction. The structure is composed of 3‐cptpy^? ligands bridging Cd atoms, with each Cd atom coordinated by six ligands and each ligand coordinating to three Cd atoms. Each Cd atom is in a slightly distorted trans‐N₂O₄ octahedral environment, forming a two‐dimensional layer structure with a (3,6)‐connected topology. Layers are linked to each other by π–π stacking, resulting in a three‐dimensional supramolecular framework. The strong luminescence and good thermal stability of (I) indicate that it can potentially be used as a luminescence sensor. The compound also shows a highly selective and sensitive response to 2,4,6‐trinitrophenol through the luminescence quenching effect.     

Oligonucleotides Containing Novel 4′‐C‐ or 3′‐C‐(Aminoalkyl)‐Branched Thymidines

The synthesis of four novel 3′‐C‐branched and 4′‐C‐branched nucleosides and their transformation into the corresponding 3′‐O‐phosphoramidite building blocks for automated oligonucleotide synthesis is reported. The 4′‐C‐branched key intermediate 11 was synthesized by a convergent strategy and converted to its 2′‐O‐methyl and 2′‐deoxy‐2′‐fluoro derivatives, leading to the preparation of novel oligonucleotide analogues containing 4′‐C‐(aminomethyl)‐2′‐O‐methyl monomer X and 4′‐C‐(aminomethyl)‐2′‐deoxy‐2′‐fluoro monomer Y (Schemes 2 and 3). In general, increased binding affinity towards complementary single‐stranded DNA and RNA was obtained with these analogues compared to the unmodified references (Table 1). The presence of monomer X or monomer Y in a 2′‐O‐methyl‐RNA oligonucleotide had a negative effect on the binding affinity of the 2′‐O‐methyl‐RNA oligonucleotide towards DNA and RNA. Starting from the 3′‐C‐allyl derivative 28 , 3′‐C‐(3‐aminopropyl)‐protected nucleosides and 3′‐O‐phosphoramidite derivatives were synthesized, leading to novel oligonucleotide analogues containing 3′‐C‐(3‐aminopropyl)thymidine monomer Z or the corresponding 3′‐C‐(3‐aminopropyl)‐2′‐O,5‐dimethyluridine monomer W (Schemes 4 and 5). Incorporation of the 2′‐deoxy monomer Z induced no significant changes in the binding affinity towards DNA but decreased binding affinity towards RNA, while the 2′‐O‐methyl monomer Z induced decreased binding affinity towards DNA as well as RNA complements (Table 2).