Controlling the π‐Stacking Behavior of Pyrene Derivatives: Influence of H‐Bonding and Steric Effects in Different States of Aggregation

The performance of opto‐electronic devices built from low‐molecular‐weight dye molecules depends crucially on the stacking properties and the resulting coupling of the chromophoric systems. Herein we investigate the influence of H‐bonding amide and bulky substituents on the π‐stacking of pyrene‐containing small molecules in dilute solution, as supramolecular aggregates, and in the solid state. A set of four pyrene derivatives was synthesized in which benzene or 4‐tert‐butyl benzene was linked to the pyrene unit either through an ester or an amide. All four molecules form supramolecular H‐aggregates in THF solution at concentrations above 1×10^?4 mol L^?1. These aggregates were transferred on a solid support and crystallized. We investigate: the excimer formation rates within supramolecular aggregates; the formation of H‐bonds as well as the optical changes during the transition from the amorphous to the crystalline state; and the excimer to monomer fluorescence ratio in crystalline films at low temperatures. We reveal that in solution supramolecular aggregation depends predominantly on the pyrene chromophores. In the crystalline state, however, the pyrene stacking can be controlled gradually by H‐bonding and steric effects. These results are further confirmed by molecular modeling. This work bears fundamental information for tailoring the solid state of functional optoelectronic materials.     

Effect of ethylene glycol on the thermodynamic and micellar properties of Tween 20

The aggregation behaviour of Tween 20 in ethylene glycol-water mixed solvents has been investigated using surface tension, density, static and dynamic light scattering, and fluorescence measurements. Micellar and surface thermodynamics data were obtained from the temperature dependence of critical micelle concentrations in various aqueous mixtures of ethylene glycol. In order to evaluate the influence of the cosolvent, the differences in the Gibbs energies of micellization of Tween 20 between water and binary solvents were determined. This study allowed us to conclude that the ability of ethylene glycol to act as a structure breaker and its interaction with the surfactant hydrophilic group are the controlling factors of the micellization process. From the evaluation of the thermodynamics of adsorption at the solution-air interface, it was determined that the surface activity of the surfactant decreases slightly with increasing concentration of ethylene glycol at a given temperature. Partial specific volume data, obtained by density measurements, indicate that the fraction of solvent molecules interacting with the micelle, via hydrogen bonds, remained roughly constant. The effect of cosolvent on the size and solvation of the aggregates was analysed by means of static and dynamic light scattering measurements. It was found that the aggregation number decreased, whereas the whole micellar solvation increased with the ethylene glycol content. Micellar micropolarity was examined using two different probes, pyrene and 8-anilinonaphthelene-1-sulfonic acid, and was found to increase with ethylene glycol addition, accompanied by an enhanced solvation. Fluorescence polarization measurements found by using coumarin 6 as a hydrophobic probe revealed an increase in the micellar microviscosity. The observed trends in these microenvironmental properties were ascribed to a participation by ethylene glycol in the micellar solvation layer.     

Effect of urea on self-organization of sodium N-(11-acrylamidoundecanoyl)-l-valinate in water

In this paper, the hypotheses proposed for the action of urea on the perturbation of molecular assemblies have been tested through studies of the effects of urea on the aggregation properties of a chiral surfactant, sodium N-(11-acrylamidoundecanoyl)-L-valinate in water. Surface tension, fluorescence, and circular dichroism were used to characterize the solution behavior of the amphiphile in the presence of urea. Surface tension measurement indicated decrease of critical aggregation concentration (cac) with the addition of urea in the low concentration range. Fluorescence probe studies using pyrene and 1-anilinonaphthalene indicated solubilization of urea molecules near the aggregate-water interface. Fluorescence anisotropy measurements using 1,6-diphenylhexatriene as probe molecule suggested increase of packing of the hydrocarbon chains of the amphiphiles upon addition of low concentration of urea. Dynamic light scattering measurements showed an increase of the hydrodynamic radius (R(h)) in the presence of increased concentration of urea. At higher concentrations of urea, the R(h) value decreased. Circular dichroism spectra showed the presence of chiral aggregates even in the presence of high concentration of urea.     

Effect of urea on self-organization of sodium N-(11-acrylamidoundecanoyl)-L-valinate in water

In this paper, the hypotheses proposed for the action of urea on the perturbation of molecular assemblies have been tested through studies of the effects of urea on the aggregation properties of a chiral surfactant, sodium N-(11-acrylamidoundecanoyl)-L-valinate in water. Surface tension, fluorescence, and circular dichroism were used to characterize the solution behavior of the amphiphile in the presence of urea. Surface tension measurement indicated decrease of critical aggregation concentration (cac) with the addition of urea in the low concentration range. Fluorescence probe studies using pyrene and 1-anilinonaphthalene indicated solubilization of urea molecules near the aggregate-water interface. Fluorescence anisotropy measurements using 1,6-diphenylhexatriene as probe molecule suggested increase of packing of the hydrocarbon chains of the amphiphiles upon addition of low concentration of urea. Dynamic light scattering measurements showed an increase of the hydrodynamic radius (R(h)) in the presence of increased concentration of urea. At higher concentrations of urea, the R(h) value decreased. Circular dichroism spectra showed the presence of chiral aggregates even in the presence of high concentration of urea.     

The solubilisation behaviour of some dichloroalkanes in aqueous solutions of PEO-PPO-PEO triblock copolymers: a dynamic light scattering, fluorescence spectroscopy, and SANS study

The aggregation behaviour of PEO-PPO-PEO triblock copolymers in water and in water + chlorinated additive mixtures was studied by means of fluorescence spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The copolymers were chosen such as to investigate the effects of molecular architecture (L35 and 10R5) and molecular weight by keeping constant the hydrophilic/hydrophobic balance (F88 and F108). 1,2-Dichloroethane was used as a prototype of water basins contaminants. The hydrodynamic radius of the block copolymer aggregates (R(h,M)) and the intensity ratio of pyrene of the first and the third vibrational band (I(1)/I(3)) were determined as a function of temperature (10-45 degrees C) and concentration. The copolymer architecture essentially does not affect R(h,M) in the entire range of temperature and concentration investigated. At a given temperature, increasing macromolecular size leads to a decrease of R(h,M). With rising temperature R(h,M) also decreases. According to the DLS results, the I(1)/I(3) change with temperature clearly detects the aggregation only for F88 and F108. The presence of 1,2-dichloroethane, at concentrations close to its solubility in water, does not lead to changes in the distribution of hydrodynamic radii for L35 and 10R5. Larger quantities of additive induce the formation of quite polydisperse mixed aggregates for L35 and of networks for 10R5. In the case of F88 and F108, low concentrations of additive lead to formation of mixed aggregates with smaller R(h,M). The SANS results corroborate the DLS and fluorescence findings proving enhancement of the copolymer aggregation through the presence of 1,2-dichloroethane. The DLS findings combined with those from the fluorescence spectroscopy provide some insight into the site of solubilisation of the additive in the aggregates.     

Spontaneously formed vesicles of sodium N-(11-acrylamidoundecanoyl)-glycinate and L-alaninate in water

Two N-acyl amino acid surfactants, sodium N-(11-acrylamidoundecanoyl)-glycinate (SAUG) and L-alaninate (SAUA), were synthesized and characterized in aqueous solution. A number of techniques, such as surface tension, fluorescence probe, light scattering, and transmission electron microscopy were employed for characterization of the amphiphiles in water. The surface and interfacial properties were measured. The amphiphiles have two critical aggregation concentrations. The results of surface tension and fluorescence probe studies suggested formation of bilayer self-assemblies in dilute aqueous solutions of the amphiphiles. The magnitudes of free energy change of aggregation have indicated that bilayer formation is more favorable in the case of SAUG. Steady-state fluorescence measurements of pyrene and 1,6-diphenyl-1,3,5-hexatriene (DPH) were used to study the microenvironment of the molecular self-assemblies. Temperature-dependent fluorescence anisotropy change of DPH probe revealed phase transition temperature of the bilayer self-assemblies. The effects of pH on the structure of the self-assemblies of SAUG and SAUA have been studied. The role of intermolecular hydrogen bonding between amide groups upon aggregation toward microstructure formation in solution has been discussed. Circular dichroism spectra suggested the presence of chiral aggregates in an aqueous solution of SAUA. The transmission electron micrographs revealed the presence of closed spherical vesicles in aqueous solutions of the amphiphiles. Dynamic light scattering measurements were performed to obtain average size of the aggregates.     

Preparation of substituted ionic carbohydrate polymers and their interactions with ionic surfactants

The formation of micelles of hexadecyltrimethylammonium chloride (CTAC) and sodium dodecylsulfate (SDS) in aqueous solutions containing charged polysaccharides was studied by steady-state and time-resolved fluorescence measurements using pyrene as a photophysical probe. Micropolarity studies using the I₁/I₃ ratio of the vibronic emission bands of pyrene and the behaviour of the I_E/I_M ratio between the excimer and monomer emissions show the formation of hydrophobic domains. The interactions between the polyelectrolytes and surfactants of opposite charge lead to the formation of induced pre-micelles at surfactant concentrations lower than the critical micellar concentration (cmc) of the surfactants. At similar concentrations, the I_E/I_M ratio shows a peak. This aggregation process is assumed to be due to electrostatic attractions. At higher surfactant concentrations, near the critical micellar concentration, micelles with the same properties as those found in pure aqueous solution are formed. On the other hand, systems containing polyelectrolytes and surfactants of the same charge do not show this behaviour at low concentrations. The presence of long alkyl chains bound to the polyelectrolytes also induces the formation of free micelles at concentrations somewhat below the aqueous cmc.     

Submicron Y2O3 particles codoped with Eu and Tb ions: size controlled synthesis and tuning the luminescence emission

The present study was aimed at elucidating the mechanism of aggregation in water of hydroxyl-terminated polyethylene glycol (PEG) of low molecular weight (600 g/mol). The results from fluorescence spectroscopy at different temperatures were consistent with surface tension measurements, suggesting aggregate formation. Indeed, the process of aggregation is accompanied by an increase in the fluorescence emission of a hydrophobic probe. So, PEG aggregates in the form of internal hydrated helices covered with CH(2) groups are shown to yield hydrophobic regions. These regions created upon PEG aggregation in water and at a temperature close to 35°C result from a balance between H bonding and entropic effects. By providing the first experimental evidence for hydrophobic mediation of aggregation with OH-terminated oxy-ethylene chains of low molecular weight, this study highlights their surfactant-like behaviour.     

Aggregation behavior in mixed system of double-chained anionic surfactant with single-chained nonionic surfactant in aqueous solution

The aggregation behavior of mixed systems of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) or sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) with nonionic surfactant pentaethylene glycol mono-n-dodecyl ether (C12E5) have been studied by means of steady-state fluorescence, electrical conductivity, dynamic light scattering, transmission electron microscopy, electrophoretic light scattering and pyrene solubilization measurements. The critical concentrations for aggregation, micropolarity, mobility, solubilization capacity and morphology of aggregates are characterized. Two critical concentrations for aggregation are observed in the mixed surfactants, which may correspond to the formation of different kinds of aggregates. Moreover, it is more favorable for AOT-C12E5 to form mixed vesicles compared to SBPBS-C12E5 at higher mole fraction of C12E5. In addition, it is revealed that SBPBS-C12E5 mixture has larger solubilization capacity for pyrene than AOT-C12E5 system.     

Poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers: preparation and aqueous solution properties

A series of water-soluble, amphiphilic graft copolymers has been prepared by free-radical copolymerization of methoxypoly(ethylene glycol) macromonomers, with either methyl methacrylate or butyl methacrylate as the comonomers, in water/ethanol solvent mixtures. Lower molecular weight copolymers were obtained by increasing the concentration of the initiator, azobisisobutyronitrile (AIBN), used in the polymerization reaction. However, the route used also led to the formation of significant quantities of tetramethylsuccinodinitrile, a toxic byproduct resulting from the cage reaction of AIBN. Static fluorescence measurements using pyrene as a probe, along with 1H NMR experiments, showed that the graft copolymers form aggregates in water at very low concentrations (approximately 0.01 g l(-1)) with the pendant hydrophilic graft chains forming a stabilizing shell around the hydrophobic backbone. An increase in the hydrophile-lipophile balance of the graft copolymers was found to lead to smaller aggregates with lower aggregation numbers and highly swollen hydrophilic shells, as revealed by small angle neutron scattering (SANS).     

Synthesis of ionic polyurethanes with pyrene rings: Spectral properties and fluorescence quenching study

Hydrophilic ionic polyurethanes with 4‐chloromethylphenylcarbamoyl‐1‐oxymethylpyrene located on the quaternary ammonium structure from a polymer based on poly(ethylene glycol), isophorone diisocyanate, and N‐methyldiethanolamine were prepared by a quaternization reaction, in which the amount of pyrene covalently attached to the polymeric backbone ranged from 1.14 to 19.82 mmol of fluorophore/100 g of polymer. It was interesting to compare the photoluminescence of the pyrene polyurethane carrying a few mole percent of pyrene moieties with that of a third polymer resulting from its subsequent quaternization with benzyl chloride up to a concentration of ionic groups as in the latter (quaternization degree = 14.15%). The process of excimer formation between the pyrene molecules attached to the ionic polyurethane was investigated in tetrahydrofuran (THF), dimethylformamide, film, and THF/H₂O to illustrate the expected differences in the polymer behavior compared with that of the starting pyrene derivative. The formation of aggregates or core–shell micelles was sustained by the fluorescence data, which indicated the existence of pyrene units in the ground state of the molecule, giving rise thus to an explanation for the high excimer‐to‐monomer intensity ratio. The fluorescence decay of pyrene polyurethanes in the presence of various concentrations of nitrobenzene used as a quencher was analyzed too when the fluorescence quenching in the polymer solution normally followed Stern–Volmer kinetics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3945–3956, 2005     

Aggregation and Photodimerization of Areno‐Condensed Annulenes

[18]‐ and [24]Annulenes condensed with three pyrene or phenanthrene ring systems show, in solution, especially in apolar solvents, a strong aggregation evidenced, for example, by concentration‐dependent ¹H‐NMR spectra. However, the fluorescence bands and the fluorescence lifetimes of these compounds depend only to a minor extent on the concentration and correspond essentially to the measurements obtained for the monomer. Among several models discussed, one is favored in which aggregates can be excited, but the emission is due to an almost undisturbed monomer. Even for the pyrene system, an excimer fluorescence cannot be detected. Nevertheless, short‐lived excimers are responsible for the regio‐ and stereoselective photodimerization to belt cyclophanes.     

Fluorescence Probe Study of the Interaction Between Acrylic Acid-co-Ethyl Methacrylate Copolymers and Sodium Dodecylsulfate

The interaction between sodium dodecylsulfate (SDS) and acrylic acid (AA)–ethyl methacrylate (EMA) copolymers has been investigated using steady state fluorescence and conductimetric measurements to assess the effect of the polymer composition on the aggregation process. Micropolarity studies using the ratio between the emission intensities of the vibronic bands of pyrene (I₁/I₃) and the shift of the fluorescence emission of pyrene-3-carboxaldehyde show that the interaction of SDS with AA-EMA copolymers occurs at surfactant concentrations smaller than that observed for the pure surfactant in water and depends on the copolymer composition. The increase of ethyl methacrylate in the copolymers lowers the critical aggregation concentration (CAC) due to the larger hydrophobic character of the polymer backbone. The formation of aggregates on the macromolecule is induced mainly by hydrophobic interactions, but the process is also influenced by the ionic strength due to the counter-ions of the polyelectrolyte.     

Toroid morphology by ABC-type amphiphilic rod-coil molecules at the air-water interface

The interfacial and aggregation behavior of the ABC-type amphiphilic molecules with semirigid dumbbell-shaped core and variable length of hydrophobic branched tails (R=(CH2)nCH3 with n=5 (1), 9 (2), 13 (3)) were investigated. At low surface pressure, smooth, uniform monolayers were formed at the air-water interface by molecules 1 and 2, whereas for molecule 3 unique 2D toroid aggregates have been formed. These aggregates were relatively stable within a range of surface pressure and spreading solution concentration. Upon compression, the 2D toroid aggregates collapsed into large, round 3D aggregates. Finally, the choice of spreading solvent has a great influence on aggregation formation into 2D or 3D micelles as a result of the variable balance of the hydrophobic interactions of branched tails and the pi-pi stacking interaction between aromatic segments.     

Probing Bile Salt Aggregates by Fluorescence Quenching

Abstract— The combination of steady-state and time-resolved quenching experiments was employed to study the aggregation behavior of sodium cholate at concentrations below 50 mAf. Naphthalene, anthracene and pyrene were used as fluorescent probe molecules, and protection by the aggregates from aqueous quenchers, as well as the onset of aggregation at low sodium cholate concentrations, was dependent on the shape of the probes. Protection from aqueous quenchers was inferred by comparing the efficiency for dynamic quenching in the absence and presence of sodium cholate and was best for naphthalene followed by pyrene and anthracene. Static quenching was observed, suggesting that probe molecules are located in an aggregate environment that also contains iodide. The incorporation of pyrene at low sodium cholate concentrations, as well as the small degree of static quenching observed, suggest that the shape complementarity, i.e. hydrophobic surface and packing, between pyrene and sodium cholate is optimum for aggregate formation.     

Spontaneous formation of vesicles by sodium 2-dodecylnicotinate in water

The surface activity and aggregation behavior of a synthesized nicotinic acid based anionic surfactant, sodium 2-dodecylnicotinate, were studied in aqueous solution. The self-assembly formation was investigated by use of a number of techniques, including surface tension and conductivity measurements, fluorescence spectroscopy, dynamic light scattering measurement, gel permeation chromatography, and microscopy. The amphiphile exhibits two breaks in the surface tension vs concentration plot, indicating stepwise aggregate formation and thus producing two values of the aggregation concentration. Stepwise aggregation of the amphiphile was further confirmed by steady-state fluorescence spectroscopy using pyrene as a probe molecule, and also the micropolarity of the aggregates was determined. The rigidity of the microenvironment was estimated by determining steady-state fluorescence anisotropy using 1,6-diphenyl-1,3,5-hexatriene as a fluorescence probe molecule. The average hydrodynamic radius and size distribution of the aggregate suggest formation of larger aggregates in aqueous solution. The formation of vesicles in water was established by conductivity measurement and a dye entrapment experiment. The entrapment of a small solute and the release capability have also been examined to demonstrate these bilayers form enclosed vesicles. Transmission electron micrographs revealed the existence of closed vesicles and closed tubules in aqueous solution. Therefore, for the first time, it has been observed that this simple single-chain nicotinic acid based amphiphile spontaneously assembles to vesicles in aqueous solution.     

A photophysical study of the interactions in poly(styrene-4-sulphonate)–n-butylvinylether block and random copolymers

Interactions between the moieties responsible for the conformations and hydrophobic microdomains in poly(styrene-4-sulphonate) (PSS) and its copolymers with n-butylvinylether (BVE) were studied by their emission spectra and the lifetimes of the phenyl groups and pyrene used as a photochemical probe. The emission spectra of PSS shows bands due to dimers and higher aggregates as well as the characteristic excimer band. At low concentrations, the random copolymers have spectra similar to that of the free monomer, whereas the block copolymers have spectra like that of PSS. At higher concentrations, the random copolymer also shows these excimer bands, due to interchain interactions. Results from the emission of pyrene prove that the behaviour of the copolymers with approximately 40% BVE seems to be relatively independent of having random or block configurations. Except at low concentrations (<0.05 g/dl), where the block copolymer already has a conformation with “stable” hydrophobic microdomains, both types of copolymers behave similarly. There is an initial aggregate equilibrium between individual chains and aggregates, associated with a relocation of the probes. At higher concentrations, both copolymers suffer a severe change in conformation, due to the formation of “stable” hydrophobic microdomains, resulting from interchain interactions. In both cases the lifetimes of pyrene are of the order of 240 ± 10 ns. Received: 27 August 1998 Accepted: 11 January 1999     

疏水改性聚丙烯酰胺的荧光研究

使用荧光探针技术,跟踪了疏水改性聚丙烯酰胺(HMPAM)在溶液中的变化过程,对HMPAM在溶液中的聚集行为进行了研究。同时也对部分水解聚丙烯酰胺(HPAM)作了对比研究。发现HMPAM在溶液中具有独特的变化规律:由疏水缔合形成超分子聚集体,再由超分子聚集体形成布满整个溶液空间网络结构的过程。并使用粘度法对其宏观流变性能进行了研究,发现两种手段所得的结果具有较好的对应关系。     

Photoresponsive soft materials: Synthesis and photophysical studies of a stilbene‐based diblock copolymer

An amphiphilic diblock copolymer composed of a photoresponsive dialkoxycyanostilbene polymethacrylate and poly(ethylene oxide) (PDACS‐b‐PEO) was synthesized and its photophysical and aggregation properties were investigated. The amphiphilic nature of the polymer caused it to self‐assemble in water, and dynamic light scattering studies indicated formation of spherical aggregates with an average size of 160 nm. Atomic force microscopy images of dried films cast from solutions containing the polymer aggregates revealed supramolecular aggregates with a spherical morphology. Photoisomerization of the stilbene chromophore in PDACS‐b‐PEO on UV irradiation resulted in the destruction of the self‐assembled superstructures which could be attributed both to change in shape of the chromophore from the linear trans isomer to the bent cis isomer which would hinder self‐aggregation of the molecules and the higher dipole moment of the cis isomer leading to a reduction of the hydrophobic nature of the stilbene containing block of PDACS‐b‐PEO. It was observed that hydrophobic dyes such as curcumin could be encapsulated within the hydrophobic interior of the spherical micellar aggregates from which the encapsulated dye could be released on UV irradiation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Amphiphilic Fluorescence Resonance Energy-Transfer Dyes: Synthesis,Fluorescence, and Aggregation Behavior in Water

Amphiphilic pyrene/perylene bis-chromophore dyes were synthesized from unsymmetrically substituted perylene bisimide dyes, which were obtained through three synthetic methods. The optical and aggregation behaviors of these functional dyes were studied by means of UV/Vis absorption and fluorescence spectroscopy, dynamic light scattering, and TEM. These dyes are highly fluorescent and cover the whole visible-light region. A donor/acceptor dye displays intramolecular fluorescence resonance energy transfer (FRET), with a high efficiency of up to 96.4 % from pyrene to perylene bisimide chromophores, which leads to a high fluorescence color sensitivity to environmental polarity. Under a λ=365 nm UV lamp, the light-emitting colors of the donor/acceptor dye change from green to yellow with increasing solvent polarity, which demonstrates application potential as a new class of FERT probes. The donor/acceptor dye in water was assembled into hollow vesicles with a narrow size distribution. The bilayer structure of the vesicular wall was directly observed by means of TEM. These vesicular aggregates in water are fluorescent at λ=650–850 nm within the near-infrared region.