Silver Nanoparticle Thin Films with Nanocavities for Surface‐Enhanced Raman Scattering

The formation of nanometer‐sized gaps between silver nanoparticles is critically important for optimal enhancement in surface‐enhanced Raman scattering (SERS). A simple approach is developed to generate nanometer‐sized cavities in a silver nanoparticle thin film for use as a SERS substrate with extremely high enhancement. In this method, a submicroliter volume of concentrated silver colloidal suspension stabilized with cetyltrimethylammonium bromide (CTAB) is spotted on hydrophobic glass surfaces prepared by the exposure of the glass to dichloromethysilane vapors. The use of a hydrophobic surface helps the formation of a more uniform silver nanoparticle thin film, and CTAB acts as a molecular spacer to keep the silver nanoparticles at a distance. A series of CTAB concentrations is investigated to optimize the interparticle distance and aggregation status. The silver nanoparticle thin films prepared on regular and hydrophobic surfaces are compared. Rhodamine 6G is used as a probe to characterize the thin films as SERS substrates. SERS enhancement without the contribution of the resonance of the thin film prepared on the hydrophobic surface is calculated as 2×10⁷ for rhodamine 6G, which is about one order of magnitude greater than that of the silver nanoparticle aggregates prepared with CTAB on regular glass surfaces and two orders of magnitude greater than that of the silver nanoparticle aggregates prepared without CTAB on regular glass surfaces. A hydrophobic surface and the presence of CTAB have an increased effect on the charge‐transfer component of the SERS enhancement mechanism. The limit of detection for rhodamine 6G is estimated as 1.0×10^?8 M . Scanning electron microscopy and atomic force microscopy are used for the characterization of the prepared substrate.     

Size Effect of 3D Aggregates Assembled from Silver Nanoparticles on Surface‐Enhanced Raman Scattering

Size matters: Nanometer‐sized gaps in aggregates of silver nanoparticles are generated by covering the nanoparticle surface with a bilayer of cetyltrimethylammonium bromide. The nanometer‐ to micrometer‐sized wells are lithographically generated on polydimethylsiloxane surfaces. The wells filled with the modified nanoparticles (see picture) and the effect of the aggregate size on SERS enhancement are investigated.

     

Theoretical Vibrational Raman and Surface‐Enhanced Raman Scattering Spectra of Water Interacting with Silver Clusters

In this study, we analyzed the Raman spectrum of a water molecule adsorbed on a cluster of 20 silver atoms, and the plasmonic electromagnetic effect of the silver surface was also considered to give a theoretical prediction of the surface‐enhanced Raman scattering spectrum. The calculations were performed at the density functional theory (DFT) level by using both frozen and unfrozen silver clusters. Two different models were used to consider the plasmonic enhancement; one of them was a modified classical (dipole) model and the other was the coupled perturbed Hartree–Fock method with excitation frequencies obtained from time‐dependent DFT calculations and with proper detuning of these frequencies. The importance of small geometrical distortions of the silver surface in the orientation of the adsorbed water was shown. Moreover, it was shown how the symmetry of the transition dipole moment and the symmetry of the vibrational modes influence the Raman intensities of the SERS spectrum.     

Novel Silver/Poly(vinyl alcohol) Nanocomposites for Surface‐Enhanced Raman Scattering‐Active Substrates

Summary: Surface‐enhanced Raman scattering (SERS)‐active substrates with high enhancement were prepared by an in situ reduction method. Novel silver/poly(vinyl alcohol) (PVA) nanocomposite films were obtained, in which the silver nitrate, poly(γ‐glutamic acid) (PGA), and PVA acted as precursor, stabilizer, and polyol reducant, respectively. The UV‐visible spectra of the as‐fabricated films showed that the surface plasmon resonance (SPR) absorption band was narrow and of a stronger intensity, which indicates that the Ag nanoparticle size distribution on the substrate was highly uniform. This finding was further confirmed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and field‐emission scanning electron microscope (FE‐SEM) measurements. It was found that a PGA‐stabilized PVA nanocomposite film revealed the presence of well‐dispersed spherical silver nanoparticles with an average diameter of 90 nm. The new substrate presents high SERS enhancement and the enhanced factor is estimated to be 10⁶ for the detection of benzoic acid.

The Raman scattering enhancement factor for the Raman spectra of benzoic acid on the various nanocomposite films.     

Cetylpyridinium Chloride Activated Trinitrotoluene Explosive Lights Up Robust and Ultrahigh Surface‐Enhanced Resonance Raman Scattering in a Silver Sol

Surface‐enhanced resonance Raman scattering (SERRS) is not realized for most molecules of interest. Here, we developed a new SERRS platform for the fast and sensitive detection of 2,4,6‐trinitrotoluene (TNT), a molecule with low Raman cross section. A cationic surfactant, cetylpyridinium chloride (CPC) was modified on the surface of silver sols (CP‐capped Ag). CPC not only acts as the surface‐seeking species to trap sulfite‐sulfonated TNT, but also undergoes complexation with it, resulting in the presence of two charge‐transfer bands at 467 and 530 nm, respectively. This chromophore absorbs the visible light that matches with the incident laser and plasmon resonance of Ag sols by the use of a 532.06 nm laser, and offered large resonance Raman enhancement. This SERRS platform evidenced a fast and accurate detection of TNT with a detection limit of 5×10^?11 M under a low laser power (200 μW) and a short integration time (3 s). The CP‐capped Ag also provides remarkable sensitivity and reliable repeatability. This study provides a facile and reliable method for TNT detection and a viable idea for the SERS detection of various non‐resonant molecules.     

Selectively Deposited Silver Coatings on Gold‐Capped Silicon Nanowires for Surface‐Enhanced Raman Spectroscopy

Gold caps on silicon nanowires are selectively coated with silver by autometallography (electroless deposition). Changing the conditions of silver deposition, a variety of different coating morphologies can be produced (see figure). The different silver coating morphologies are investigated in terms of their capabilities for surface enhanced Raman scattering (SERS) experiments.

     

新型银胶基底研究HSA的近红外表面增强拉曼散射

用紫外—可见两步光化学还原法，合成了等离子体共振峰出现在近红外区的新 型绿色银胶．首次用该银胶作为基底研究人血清白蛋白(HSA)的近红外表面增强拉 曼散射(NIR—SERS)，发现银胶中的线状银纳米粒子聚集体有较强的NIR—SERS效应 和生物兼容性，这为研究生物大分子的结构、构象和界面作用提供了一种较为理想 的活性基底．由所得到的NIR—SERS光谱可发现，吸附在银纳米粒子表面的HSA的肽 链骨架仍以α—螺旋结构为主，其二级构象特征基本不变；吸附作用诱导部分芳香 氨基酸残基所处的微环境发生改变，趋于银纳米粒子表面．此外，明显观察到 COO^-与C—S的特征谱带说明HSA中去质子的羧基氧、二硫桥键的硫直接与银纳米粒 子表面作用．     

Simultaneous Capture,Detection, and Inactivation of Bacteria as Enabled by a Surface‐Enhanced Raman Scattering Multifunctional Chip

Herein, we present a multifunctional chip based on surface‐enhanced Raman scattering (SERS) that effectively captures, discriminates, and inactivates pathogenic bacteria. The developed SERS chip is made of a silicon wafer decorated with silver nanoparticles and modified with 4‐mercaptophenylboronic acid (4‐MPBA). It was prepared in a straightforward manner by chemical reduction assisted by hydrogen fluoride etching, followed by the conjugation of 4‐MPBA through Ag? S bonds. The dominant merits of the fabricated SERS chip include excellent reproducibility with a relative standard deviation (RSD) value smaller than 11.0 %, adaptable bacterial‐capture efficiency (ca. 60 %) at low concentrations (500–2000 CFU mL^?1), a low detection limit (down to a concentration of 1.0×10² cells mL^?1), and high antibacterial activity (an antibacterial rate of ca. 97 %). The SERS chip enabled sensitive and specific discrimination of Escherichia coli and Staphylococcus aureus from human blood.     

Surface‐Enhanced Raman Scattering Based on Controllable‐Layer Graphene Shells Directly Synthesized on Cu Nanoparticles for Molecular Detection

Graphene shells with a controllable number of layers were directly synthesized on Cu nanoparticles (CuNPs) by chemical vapor deposition (CVD) to fabricate a graphene‐encapsulated CuNPs (G/CuNPs) hybrid system for surface‐enhanced Raman scattering (SERS). The enhanced Raman spectra of adenosine and rhodamine 6G (R6G) showed that the G/CuNPs hybrid system can strongly suppress background fluorescence and increase signal‐to‐noise ratio. In four different types of SERS systems, the G/CuNPs hybrid system exhibits more efficient SERS than a transferred graphene/CuNPs hybrid system and pure CuNPs and graphene substrates. The minimum detectable concentrations of adenosine and R6G by the G/CuNPs hybrid system can be as low as 10^?8 and 10^?10 M , respectively. The excellent linear relationship between Raman intensity and analyte concentration can be used for molecular detection. The graphene shell can also effectively prevent surface oxidation of Cu nanoparticles after exposure to ambient air and thus endow the hybrid system with a long lifetime. This work provides a basis for the fabrication of novel SERS substrates.     

Distinguishing Enantiomers by Tip‐Enhanced Raman Scattering: Chemically Modified Silver Tip with an Asymmetric Atomic Arrangement

Discrimination between enantiomers is achieved by tip‐enhanced Raman scattering (TERS) using a silver tip that is chemically modified by an achiral para‐mercaptopyridine (pMPY) probe molecule. Differences in the relative intensities of the pMPY spectra were monitored for three pairs of enantiomers containing hydroxy (?OH) and/or amino (?NH₂) groups. The N: or N⁺?H functionality of the pMPY‐modified tip participates in hydrogen‐bond interactions with a particular molecular orientation of each chiral isomer. The asymmetric arrangement of silver atoms at the apex of the tip induces an asymmetric electric field, which causes the tip to become a chiral center. Differences in the charge‐transfer (CT) states of the metal‐achiral probe system in conjunction with the asymmetric electric field produce different enhancements in the Raman signals of the two enantiomers. The near‐field effect of the asymmetric electric field, which depends on the number of analyte functional groups capable of hydrogen‐bond formation, improves the degree of discrimination.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Selective and Sensitive Recognition of Cu2+ in an Aqueous Medium: A Surface‐Enhanced Raman Scattering (SERS)‐Based Analysis with a Low‐Cost Raman Reporter

In the present study, surface‐enhanced Raman spectra of a bifunctional Raman reporter, 2‐mercaptobenzimidazole, has been found to be responsive exclusively towards Cu²⁺ ions while the reporter remains anchored on the Au nanoparticle surface. Thus a specific Cu²⁺‐ion‐detection protocol emerges. The simplicity, sensitivity, and reproducibility of the method allow routine and quantitative detection of Cu²⁺ ions. An interference study involving a wide number of other metal ions shows the procedure to be uniquely selective and analytically rigorous. A theoretical study was carried out to corroborate the experimental results. Finally, the method is promising for real‐time assessment of Cu²⁺ ions in aqueous samples and also has the ability to discriminate Cu^I and Cu^II ions in solution.     

New Tools for Investigating Electromagnetic Hot Spots in Single‐Molecule Surface‐Enhanced Raman Scattering

Surface‐enhanced Raman scattering (SERS) is quickly growing as an analytical technique, because it offers both molecular specificity and excellent sensitivity. For select substrates, SERS can even be observed from single molecules, which is the ultimate limit of detection. This review describes recent developments in the field of single‐molecule SERS (SM‐SERS) with a focus on new tools for characterizing SM‐SERS‐active substrates and how they interact with single molecules on their surface. In particular, techniques that combine optical spectroscopy and microscopy with electron microscopy are described, including correlated optical and transmission electron microscopy, correlated super‐resolution imaging and scanning electron microscopy, and correlated optical microscopy and electron energy loss spectroscopy.     

Self‐Assembled Au Nanoparticles as Substrates for Surface‐Enhanced Vibrational Spectroscopy: Optimization and Electrochemical Stability

Three‐dimensional nanostructured metallic substrates for enhanced vibrational spectroscopy are fabricated by self‐assembly. Nanostructures consisting of one to 20 depositions of 13 nm‐diameter Au nanoparticles (NPs) on Au films are prepared and characterized by means of AFM and UV/Vis reflection–absorption spectroscopy. Surface‐enhanced polarization modulation infrared reflection–absorption spectroscopy (PM‐IRRAS) is observed from Au NPs modified by the probe molecule 4‐hydroxythiophenol. The limitation of this kind of substrate for surface‐enhanced PM‐IRRAS is discussed. The surface‐enhanced Raman scattering (SERS) from the same probe molecule is also observed and the effect of the number of Au‐NP depositions on the SERS efficiency is studied. The SERS signal from the probe molecule maximizes after 11 Au‐NP depositions, and the absolute SERS intensities from different batches are reproducible within 20 %. In situ electrochemical SERS measurements show that these substrates are stable within the potential window between ?800 and +200 mV (vs. Ag/AgCl/sat. Cl^?).