Unexpected 1,3‐Dipolar Cycloaddition Reaction of Thiazolo[3,2‐a]pyrimidine Derivatives and Nitrilimine

The 1,3‐dipolar cycloaddition reactions of nitrilimine with thiazolo[3,2‐a]pyrimidine derivatives was investigated. Bis‐cycloadducts were obtained through a domino 1,3‐dipolar cycloaddition/ring‐opening/ring‐opening/1,3‐dipolar cycloaddition processes. The structures of the products were characterized thoroughly by NMR, IR, MS, elemental analysis together with X‐ray crystallographic analysis.     

Efficient Synthesis of Pyrrolo[1,2-f]phenanthridine Derivatives via Dipolar Cycloaddition of Phenanthridine,Activated Acetylenes,and Ethyl Bromopyruvate

The three-component reactions of phenanthridine, activated acetylenes, and ethyl bromopyruvate through both of simultaneous and stepwise process are surveyed. The reactions afforded the corresponding pyrrolo[1,2-f]phenanthridine derivatives in good yields without using any catalyst and activation.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

1,4‐Dipolar Cycloaddition Reactions in Ionic Liquids: A Facile Synthesis of 9aH,15H‐[1]Benzopyrano[3′,2′: 3,4]pyrido[2,1‐a]isoquinolines (=9aH,15H‐Benzo[a][1]benzopyrano[2,3‐h]quinolizines)

Ionic liquids were found to be a suitable reaction medium for 1,4‐dipolar cycloaddition reactions of an isoquinoline, an activated alkyne, and a 4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehyde at room temperature to afford [1]benzopyrano‐pyrido‐isoquinoline (=9aH,15H‐benzo[a][1]benzopyrano[2,3‐h]quinolizine) derivatives selectively in good yields. The ionic liquid can be recovered and recycled in further runs without loss of activity.     

Synthesis of Novel Spiro Thiazolo[3,2-a][1,3,5]triazines via 1,3-Dipolar Cycloaddition of Azomethine Ylide

The 1,3‐dipolar cycloaddition of an azomethine ylide generated by a decarboxylative route from sarcosine and acenaphthenequinone to 7‐arylmethylidene‐3‐aryl‐3,4‐dihydro‐2H‐thiazolo[3,2‐a][1,3,5]triazin‐6(7H)‐ones afforded novel dispiro[acenaphthylene‐1,2′‐pyrrolidine]‐3′,7′ ′‐[1,3]thiazolo[3,2‐a][1,3,5]triazines in moderate yields. The structures of the products were determined and characterized thoroughly by NMR, MS, IR, elemental analysis and X‐ray crystallographic analysis. The results of experiment indicated that this 1,3‐dipolar cycloaddition proceeded with high stereoselectivity and regioselectivity.     

Synthesis of 2,5‐Disubstituted Derivatives of Pyrano[2,3‐d][1,3]thiazines via the Interaction of 2‐Substituted 4‐Hydroxy‐6H‐1,3‐thiazine‐6‐ones with Aldehydes

A new and efficient route for the synthesis of derivatives of the poorly investigated pyrano[2,3‐d][1,3]thiazine heterocyclic system is disclosed. These compounds were prepared via annulation of 2‐aryl‐4‐hydroxy‐6H‐1,3‐thiazine‐6‐ones with aliphatic and aromatic aldehydes in the presence of pyridine. The method is general and versatile, and the interaction is independent on the nature of the aldehyde, the only exceptions being formaldehyde and salicylaldehydes.     

Synthesis and Reactions of 3‐Methylthiazolo[3,2‐a]Benzimidazole‐2‐Carboxylic Acid Hydrazide: Synthesis of Some New Pyrazole, 1,3‐Thiazoline, 1,2,4‐Triazole and 1,2,4‐Triazolo[3,4‐b]‐1,3,4‐Thiadiazine Derivatives Pendant to Thiazolo[3,2‐a]Benzimidazole Moiety

The reaction of 3‐methylthiazolo[3,2‐a]benzimidazole‐2‐carboxylic acid ethyl ester (1) with hydrazine hydrate gives the hydrazide 2 which reacts with CS₂/KOH to afford the potassium salt 3. Treatment of 3 with l‐aryl‐2‐bromoethanones 4a,b afforded the 1,3‐thiazoline derivatives 6a,b, respectively, while the reaction of 3 with hydrazine hydrate afforded 1,2,4‐triazole‐3‐thione derivative 9. The reaction of 9 with l‐aryl‐2‐bromoethanones 4a,b and with hydrazonyl chlorides 11a,b gave the 1,2,4‐triazolo[3,4‐b]‐1,3,4‐thiadiazine derivatives 10a,b and 12a,b, respectively. Treatment of hydrazide 2 with phenyl isothiocyanate in refluxing benzene gave the thiosemicarbazide derivative 16. The latter reaction gave 1,3,4‐oxadiazole derivative 17 when benzene was replaced by DMF. Cyclization of the thiosemicarbazide derivative 16 with NaOH resulted in the formation of the 1,2,4‐triazole‐3‐thione derivative 18.     

Multicomponent Transformation of Isoindoline‐1,3‐diimine (=1H‐Isoindole‐1,3(2H)‐diimine), Acetylenic Esters,and Triphenylphosphine to Novel Dihydropyrimido[2,1‐a]isoindole Derivatives

The three‐component reaction of the zwitterions generated from dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates and triphenylphosphine (Ph₃P) with isoindoline‐1,3‐diimine (=1H‐isoindole‐1,3(2H)‐diimine) is described (Scheme 1). This reaction affords the corresponding special type of substituted dihydropyrimido[2,1‐a]isoindole derivatives in good yields without using any catalyst and activation (Table).     

The Synthesis of 2,11‐Diamino‐4,9‐diphenyl‐4,9‐dihydrobenzo [f] pyrano[3,2‐h]chromene‐3,10‐dicarbonitrile Derivatives using Triethanolammonium Acetate as a Green Ionic Liquid

Triethanolammonium acetate [TEA ][HOAc ] was used as a green ionic liquid and successfully utilized for the multi‐component synthesis of 2,11‐diamino‐4,9‐diphenyl‐4,9‐dihydrobenzo[f]pyrano[3,2‐h]chromene‐3,10‐dicarbonitrile derivatives as new compounds by the reaction of 2,3‐naphthalenediol with malononitrile and various aldehydes. Mild reaction conditions and high yields are some of the advantages of this method. These compounds were identified by IR , NMR spectroscopy and mass analysis.     

Synthesis of[1,2,4]Oxadiazolo[4,5-a]thiazolo[2,3-b]pyrimidin-9(10H)-ones via 1,3-Dipolar Cycloaddition of Nitrile Oxide to Thiazolo[3,2-a]pyrimidin-3-one Derivatives

A new class of [1,2,4]oxadiazolo[4,5‐a]thiazolo[2,3‐b]pyrimidin‐9(10H)‐one was prepared in moderate yields by the reaction of nitrile oxide with 2‐arylmethylidene‐6,7‐dihydro‐5H‐thiazolo[3,2‐a]pyrimidin‐3‐one. The reaction site of dipolarphile is the C?N of thiazolo[3,2‐a]pyrimidin‐3‐one rather than the expected C?C of arylmethylidene. The structures of the products were characterized thoroughly by IR, elemental analysis, MS, and NMR analysis.     

One‐Pot Green Synthesis of Thiazolo[3,2‐a]pyridine Derivatives via Tandem Cyclization in Aqueous Media

Facile, three‐component domino reactions of readily available thioglycolic acid/ethyl thioglycolate, aromatic aldehydes, and malononitrile/ethyl cyanoacetate in aqueous potassium carbonate at room temperature afforded thiazolo[3,2‐a]pyridine derivatives chemoselectively in good to excellent yield. All the formed 4H‐chromenes were characterized by spectral and X‐ray methods.     

An Approach to the Synthesis of Spiro[indene‐pyridoisoquinoline] Derivatives via 1,4‐Dipolar Cycloaddition of Isoquinoline and Acetylene Esters,and (1,3‐Dihydro‐1,3‐dioxo‐2H‐inden‐2‐ylidene)malononitrile

A concise and efficient approach to the spiro‐tetrahydroisoquinoline derivatives has been developed by 1,4‐dipolar cycloaddition of zwitterions resulting from isoquinoline and acetylene esters and (1,3‐dihydro‐1,3‐dioxo‐2H‐inden‐2‐ylidene)malononitrile in MeCN at room temperature. The significance of this method lies in good yields and ease of product purification, and no inert atmosphere is required. The structures of the products were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme).     

A Novel and Efficient Synthesis of Pyrido[1,2‐a]‐Fused 1,3‐Diazaheterocyclic Compounds via a One‐Pot Three‐Component Reaction

An efficient one‐pot synthesis of pyrido[1,2‐a]‐fused 1,3‐diazaheterocyclic compounds by three‐component reaction of diamine, nitroketene dithioacetal (=1,1‐bis(methylsulfanyl)‐2‐nitroethene), and electron‐poor itaconic anhydride (=2‐methylidenesuccinic anhydride=2‐methylidenebutanedioic anhydride) in aqueous EtOH is reported. This protocol has the advantages of easiness, higher yields, and shorter reaction times. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).     

An Efficient One‐Pot Four‐Component Synthesis of Functionalized Imidazo[1,2‐a]pyridines

An efficient one‐pot four‐component protocol for the synthesis of imidazo[1,2‐a]pyridines was developed by condensing ethane‐1,2‐diamine ( 2 ), 1,1‐bis(methylthio)‐2‐nitroethene ( 1 ), aldehydes 3 , and activated methylene compounds in EtOH under reflux conditions (Tables 1–3). The features of this procedure are operational simplicity, good yields of products, in situ preparation of heterocyclic ketene aminals (HKA), and catalyst‐free conditions.     

Multicomponent Reactions of Furan‐2,3‐diones: Synthesis and Characterizations of Furo[3,2‐c]pyran‐4‐ones

Furo[3,2‐c]pyran‐4‐ones, which possess a natural‐product skeleton, are synthesized via a simple, one‐pot, three‐component reaction of furan‐2,3‐diones with dialkyl acetylenedicarboxylates and Ph₃P.     

γ‐Fe2O3@Cu3Al‐LDH‐TUD as a new Amphoteric,Highly Efficient and Recyclable Heterogeneous Catalyst for the Solvent‐free Synthesis of Dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens

Thiourea dioxide was immobilized on γ‐Fe₂O₃@Cu₃Al‐LDH magnetic nanoparticles to prepare the γ‐Fe₂O₃@Cu₃Al‐LDH‐TUD MNPs. The structure and properties of these magnetic nanoparticles were established by FT‐IR, EDX, SEM, XRD, and hystogram of particle size analytical methods. The results obtained from these analytical methods confirmed the successful immobilization of the thiourea dioxide onto the magnetic support. The synthesized magnetic nanoparticles (MNPs) exhibited high catalytic activity in one‐pot three‐component reactions under mild and solvent‐free conditions for the synthesis of diverse ranges of dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens. All the reactions proceeded smoothly to furnish the respective products in excellent yields. Simple isolation of the products, avoidance of harmful organic solvents, versatility of the catalyst and its easy magnetic separation and reusability with no significant loss of activity are the main advantages of the present method.     

One‐pot Combinatorial Synthesis of Benzo[4,5]imidazo‐[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one Derivatives

A series of novel fused tetracyclic benzo[4,5]imidazo[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one derivatives were synthesized via the reaction of aryl aldehyde, 2H‐thiopyran‐3,5(4H,6H)‐dione, and 1H‐benzo[d]imidazol‐2‐amine in glacial acetic acid. This protocol features mild reaction conditions, high yields and short reaction time.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

Intramolecular Hetero‐Diels–Alder Reactions Catalyzed by BiCl3: Stereoselective Synthesis of Benzo‐Annelated Decahydrofuro[3,2‐h][1,6]naphthyridine Derivatives

A novel, efficient synthesis of a series of functionalized, benzo‐annelated decahydrofuro[3,2‐h][1,6]naphthyridine derivatives 3 has been achieved. The protocol is based on the intramolecular hetero‐Diels–Alder (IMHDA) reaction of in situ formed imines derived from an N‐prenylated sugar aldehyde 1 and different aromatic amines 2 in the presence of bismuth(III) chloride as catalyst. The reactions could be run under very mild conditions at room temperature, and were complete within 30 min, affording exclusively and stereoselectively the corresponding trans‐fused products 3 in good‐to‐excellent yields (Table).