NADH Electrooxidation Using Bis(1,10-phenanthroline-5,6-dione) (2,2'-bipyridine)ruthenium(II)-Exchanged Zirconium Phosphate Modified Carbon Paste Electrodes

We present a carbon paste electrode (CPE) modified using the electron mediator bis(1,10‐phenanthroline‐5,6‐dione)(2,2′‐bipyridine)ruthenium(II) ([Ru(phend)₂bpy]²⁺) exchanged into the inorganic layered material zirconium phosphate (ZrP). X‐Ray powder diffraction showed that the interlayer distance of ZrP increases upon [Ru(phend)₂bpy]²⁺ intercalation from 10.3 Å to 14.2 Å. The UV‐vis and IR spectroscopies results showed the characteristic peaks expected for [Ru(phend)₂bpy]²⁺. The UV‐vis spectrophotometric results indicate that the [Ru(phend)₂bpy]²⁺ concentration inside the ZrP layers increased as a function of the loading level. The exchanged [Ru(phend)₂bpy]²⁺ exhibited luminescence even at low concentration. Modified CPEs were constructed and analyzed using cyclic voltammetry. The intercalated mediator remained electroactive within the layers (E°′=–38.5 mV vs. Ag/AgCl, 3.5 M NaCl) and electrocatalysis of NADH oxidation was observed. The kinetics of the modified CPE shows a Michaelis–Menten behavior. This CPE was used for the oxidation of NADH in the presence of Bakers' yeast alcohol dehydrogenase. A calibration plot for ethanol is presented.     

A Novel Three‐Electrode System Fabricated on Polymethyl Methacrylate for On‐Chip Electrochemical Detection

A new strategy of three‐electrode system fabrication in polymer‐based microfluidic systems is described here. Standard lithography, hot embossing and UV‐assisted thermal bonding were employed for fabrication and assembly of the microfluidic chip. For the electrode design the gold working (WE) and counter electrodes (CE) are placed inside a main channel through which the sample solution passes. A silver reference electrode (RE) is embedded in a small side channel containing KCl solution that is continuously pushed into the main channel. In the present work, the overall electrochemical set up and its microfabrication is described. Conditions including silver ion concentration, cyclic voltammetry (CV) settings, and the flow rate of KCl solution in the RE channel were optimized. The electrochemical performance of the three‐electrode system was evaluated by CV and also by amperometric oxidation of ferro hexacyanide ([Fe(CN)₆]^4?) and ruthenium bipyridyl ([Ru(bipy)₃]²⁺) at 400 mV and 1200 mV, respectively. CV analysis using ferri/ferro hexacyanide showed a stable, quasi‐reversible redox reaction at the electrodes with 96 mV peak separation and an anodic/cathodic peak ratio of 1. Amperometric analysis of the electrochemical species resulted in linear correlation between analyte concentration and current response in the range of 0.5–15 µM for [Fe(CN)₆]^4?, and 0–1000 µM for [Ru(bipy)₃]²⁺. Upon the given experimental conditions, the limit of detection was found to be 3.15 µM and 24.83 µM for [Fe(CN)₆]^4? and [Ru(bipy)₃]²⁺, respectively. As a fully integrated three‐electrode system that is fabricated on polymer substrates, it has great applications in microfluidic‐based systems requiring stable electrochemical detection.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

Cyano‐bridged Molecular Square: [Ni(iprtacn)Fe(phen)2(CN)2]2(PF6)4·6CH3CN – Preparation,Structure, Magnetic Properties and Binding with DNA

The cyano‐bridged molecular square Ni(iprtacn)]₂[Fe(phen)₂(CN)₂]₂(PF₆)₄ · 6CH₃CN ( 1 ) (iprtacn = 1,4,7‐triisopropyl‐1,4,7‐triazacyclononane, phen = 1, 10‐phenanthroline) was prepared and its crystal structure, magnetic properties, and binding with DNA were characterized. The four metal ions Ni^IIFe^IINi^IIFe^II of the complex 1 are almost coplanar. Magnetic susceptibilities measured over the range of 2–300 K show weak antiferromagnetic interactions between the two nickel(II) ions; best fitting for the experimental data leads to J = –1.27 cm^–1. UV/Vis and fluorescence spectra show that the complex is able to displace DNA‐bound EB and bind to DNA with strong interactions.     

Activation of Aryl and Heteroaryl Halides by an Iron(I) Complex Generated in the Reduction of [Fe(acac)3] by PhMgBr: Electron Transfer versus Oxidative Addition

The mechanism of the reactions of aryl/heteroaryl halides with aryl Grignard reagents catalyzed by [Fe^III(acac)₃] (acac=acetylacetonate) has been investigated. It is shown that in the presence of excess PhMgBr, [Fe^III(acac)₃] affords two reduced complexes: [PhFe^II(acac)(thf)_n] (n=1 or 2) (characterized by ¹H NMR and cyclic voltammetry) and [PhFe^I(acac)(thf)]^? (characterized by cyclic voltammetry, ¹H NMR, EPR and DFT). Whereas [PhFe^II(acac)(thf)_n] does not react with any of the investigated aryl or heteroaryl halides, the Fe^I complex [PhFe^I(acac)(thf)]^? reacts with ArX (Ar=Ph, 4‐tolyl; X=I, Br) through an inner‐sphere monoelectronic reduction (promoted by halogen bonding) to afford the corresponding arene ArH together with the Grignard homocoupling product PhPh. In contrast, [PhFe^I(acac)(thf)]^? reacts with a heteroaryl chloride (2‐chloropyridine) to afford the cross‐coupling product (2‐phenylpyridine) through an oxidative addition/reductive elimination sequence. The mechanism of the reaction of [PhFe^I(acac)(thf)]^? with the aryl and heteroaryl halides has been explored on the basis of DFT calculations.     

Nitrates and bis(dithiooxalato)nickelates(II) of biacetyldihydrazone complexes

Summary Biacetyldihydrazone (BdH) complexes [M(BdH)₃](NO₃)₂ (M=Co^II, Ni^II, Cu^II or Zn^II); [Fe(BdH)₃](NO₃)₃; [M(BdH)₃][Ni(dto)₂] (M=Co^II, Ni^II or Zn^II; dto=dithiooxalate); [Cu(BdH)₂][Ni(dto)₂] and [Fe(BdH)₃]₂[Ni(dto)₂]₃ have been prepared and characterized by chemical analysis, conductance measurements, electronic and i.r. spectral studies and cyclic voltammetry.A mononuclear octahedral configuration is proposed for all cationic complexes, excepting [Cu(BdH)₂][Ni(dto)₂, which is probably a dithiooxalate bridged dimer.     

Electrochemical Behavior and Multilayer Assembly Films with Fine Functional Activities of the Sandwich‐Type Polyoxometallate [Sb2W20Fe2O70(H2O)6]8−

The iron‐substituted sandwich‐type polyoxometalate (POM), comprised of the main group element Sb(III) as the central heteroatom, [Sb₂W₂₀Fe₂O₇₀(H₂O)₆]^8? (Sb₂W₂₀Fe₂), is one of the Krebs‐type derivatives. For the first time, the POMs' redox electrochemistry has been elucidated under acidic conditions employing cyclic voltammetry. It exhibited what is believed to be a bielectronic redox couple associated with the two Fe(III) centers followed by four‐electron and two‐electron redox processes, respectively, with these being attributed to redox processes of the tungsten‐oxo framework. The oxidized form of this POM was found to be stable from pH 1.5 to pH 6. Release of the iron centers from the complex, namely demetallization, was observed upon reduction of the Fe(III) sites at room temperature, with an influence of the solution pH being observed. Through the technique of layer‐by‐layer (LBL) assembly, the POM was successfully immobilized on both quartz and glassy carbon electrode (GCE) surfaces by alternate deposition with the polyelectrolyte poly(diallydimethylammonium chloride) (PDDA). Thus‐prepared multilayer films have been characterized by cyclic voltammetry (CV), UV‐vis spectroscopy (UV‐vis) and XPS. The electrocatalytic activities of the multilayer films containing Sb₂W₂₀Fe₂ have been investigated towards the reduction of NO₃^? and IO₃^?. With an increase in the number of Sb₂W₂₀Fe₂ monolayers within the assembly, the catalytic current towards the reduction of IO₃^? was enhanced.     

Electrochemical Detection of Pb(II) by Glassy Carbon Electrode Modified with Amine-Functionalized Magnetite Nanoparticles

An amine-Fe₃O₄ modified glassy carbon (GC) electrode was constructed for detecting Pb(II) ions in wastewater. The electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Square wave anodic stripping voltammetry (SWASV) was used to detect the Pb(II), and the detection limit of Pb(II) was 0.15 µM. The sensitivity of the electrode to detect Pb(II) was about 10.07 µA/µM, with a correlation coefficient of 0.991, which was approximately 10 times bigger than that of a pure Fe₃O₄ modified electrode. The electrode also showed good selectivity and stability. This results indicated that the amine-magnetite material could have some potential applications in heavy metal ions detection in wastewater.     

Electrocatalytic oxidation of pyridoxine (vitamin B<Subscript>6</Subscript>) on aluminum electrode modified by metallic palladium particles/iron (III) hexacyanoferrate (II) film

The electrocatalytic activity of a Prussian blue (PB) film on the aluminum electrode by taking advantage of the metallic palladium characteristic as an electron-transfer bridge (PB/Pd–Al) for electrooxidation of 2-methyl-3-hydroxy-4,5-bis (hydroxyl–methyl) pyridine (pyridoxine) is described. The catalytic activity of PB was explored in terms of Fe^III [Fe^III (CN)₆]/Fe^III [Fe^II (CN)₆]¹⁻ system. The best mediated oxidation of pyridoxine (PN) on the PB/Pd–Al-modified electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 6 at scan rate of 20 mV s⁻¹. The mechanism and kinetics of the catalytic oxidation reaction of PN were monitored by cyclic voltammetry and chronoamperometry. The results were explained using the theory of electrocatalytic reactions at chemically modified electrodes. The charge transfer-rate limiting reaction step is found to be a one-electron abstraction, whereas a two-electron charge transfer reaction is the overall oxidation reaction of PN by forming pyridoxal. The value of α, k, and D are 0.5, 1.2 × 10² M⁻¹ s⁻¹, and 1.4 × 10⁻⁵ cm² s⁻¹, respectively. Further examination of the modified electrodes shows that the modifying layers (PB) on the Pd–Al substrate have reproducible behavior and a high level of stability after posing it in the electrolyte or Pyridoxine solutions for a long time.     

Light Harvesting and Directional Energy Transfer in Long‐Lived Homo‐ and Heterotrimetallic Complexes of FeII,RuII, and OsII

A new family of trimetallic complexes of the form [(bpy)₂M(phen‐Hbzim‐tpy)M′(tpy‐Hbzim‐phen)M(bpy)₂]⁶⁺ (M=Ru^II, Os; M′=Fe^II, Ru^II, Os; bpy=2,2′‐bipyridine) derived from heteroditopic phenanthroline–terpyridine bridge 2‐{4‐[2,6‐di(pyridin‐2‐yl) pyridine‐4‐yl]phenyl}‐1H‐imidazole[4,5‐f][1,10]phenanthroline (phen‐Hbzim‐tpy) were prepared and fully characterized. Zn²⁺ was used to prepare mixed‐metal trimetallic complexes in situ by coordinating with the free tpy site of the monometallic precursors. The complexes show intense absorptions throughout the UV/Vis region and also exhibit luminescence at room temperature. The redox behavior of the compounds is characterized by several metal‐centered reversible oxidation and ligand‐centered reduction processes. Steady‐state and time‐resolved luminescence data show that the potentially luminescent Ru^II‐ and Os^II‐based triplet metal‐to‐ligand charge‐transfer (³MLCT) excited states in the triads are quantitatively quenched, most likely by intercomponent energy transfer to the lower lying ³MLCT (for Ru and Os) or triplet metal‐centered (³MC) excited states of the Fe^II subunit (nonluminescent). Interestingly, iron did not adversely affect the photophysics of the respective systems. This suggests that the multicomponent molecular‐wire‐like complexes investigated here can behave as efficient light‐harvesting antennas, because all the light absorbed by the various subunits is efficiently channeled to the subunit(s) in which the lowest‐energy excited states are located.     

Nucleic Acid Biosensor for Detection of Human Immunodeficiency Virus Using Aquabis(1,10‐phenanthroline)copper(II) Perchlorate as Electrochemical Indicator

The electrochemical behavior of aquabis(1,10‐phenanthroline)copper(II) perchlorate [Cu(H₂O)(phen)₂]·2ClO₄, where phen=1,10‐phenanthroline, on binding to DNA at a glassy carbon electrode (GCE) and in solution, was described. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) results showed that [Cu(H₂O)(phen)₂]²⁺ had excellent electrochemical activity on the GCE with a couple of quasi‐reversible redox peaks. The interaction mode between [Cu(H₂O)(phen)₂]²⁺ and double‐strand DNA (dsDNA) was identified to be intercalative binding. An electrochemical DNA biosensor was developed with covalent immobilization of human immunodeficiency virus (HIV) probe for single‐strand DNA (ssDNA) on the modified GCE. Numerous factors affecting the probe immobilization, target hybridization, and indicator binding reactions were optimized to maximize the sensitivity and speed of the assay. With this approach, a sequence of the HIV could be quantified over the range from 7.8×10^?9 to 3.1×10^?7 mol·L^?1 with a linear correlation of γ=0.9987 and a detection limit of 1.3×10^?9 mol·L^?1.     

Fabrication of Self‐Assembled Tris(1,10‐phenanthroline) ruthenium/12‐Molybdophosphoric Acid Films with Bifunctional Electrocatalytic and Photoluminescent Properties

The thin films containing transition metal complex tris(1,10‐phenanthroline) ruthenium(II) Ru(phen)₃Cl₂ (abbr Ru(phen)₃, phen=1,10‐phenanthroline), and 12‐molybdophosphoric acid [PMo₁₂O₄₀]_3? (abbr PMo₁₂) were fabricated on quartz, silicon and ITO substrates by layer‐by‐layer (LBL) method. The LBL films were characterized by the UV‐vis spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy and cyclic voltammetry. The films can catalyze both the reduction of ClO , BrO , IO , and the oxidation of C₂O due to the presence of bifunctional composite, and the redox potentials depend on pH as a result of protonation. The photoluminescence of films were also investigated. The films exhibited photoluminescence arising from π*–t_2g ligand‐to‐metal transition of Ru(phen)₃.     

[M(en)3] (ndt)•H2O的水热合成、晶体结构和光学性能 ( M=NiⅡ, CoⅡ, MnⅡ and ndt=1,5-naphthalenedithiolate )

水热条件下，合成了三个新的配合物[Ni(en)₃] (ndt) ·H₂O 1, [Co(en)₃] (ndt) ·H₂O 2 和[Mn(en)₃] (ndt) ·H₂O 3。晶体结构通过X-射线单晶衍射进行了表征。三个配合物均属于单斜晶系，Cc空间群。[M(en)₃]²⁺阳离子、ndt阴离子和结晶水分子通过氢键自组装出相同结构的三维网。通过紫外-可见-近红外漫反射光谱对这三个配合物的光吸收性能和能带进行了测定。     

Kinetic studies on the periodate oxidation of an iron(II) oxime‐imine complex

The iron(II) complex of H₂L (H₂L=3, 14‐dimethyl‐4, 7, 10, 13‐tetraazahexadeca‐3,13‐diene‐2,15‐dione dioxime, Coord. Chem. Rev., 33, 87 (1980)) is oxidized by periodate very rapidly in the range pH 2.0–7.0, and the kinetics of the reaction has been followed by stopped‐flow spectrophotometry at 30°C and ionic strength I=0.20 mol L⁻¹ (NaClO₄). The reaction is found to follow a simple second‐order kinetics as −d/dt [Fe^II(H₂L)²⁺]=k [Fe^II(H₂L)²⁺] [I(VII)], giving [Fe^III(L)]⁺ and IO₃⁻ as the final products. The reaction has been proposed to occur through a H‐bonded transition state formed probably between the protonated oxime group of the ligand and the oxygen atom on the periodate species, followed by an electron transfer from Fe^II centre to I^VII in a rate‐determining step. The I^VI species thus generated reacts in a fast step with another Fe^II complex. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 23–28, 1999     

Bis(4,4′‐dimethyl‐2,2′‐bipyridine) ruthenium (II) Complexes Containing 2‐Arylimidazo‐ [4,5‐f] [1,10] phenanthroline: Syntheses,Characterization and Third‐order Nonlinear Optical Properties

Four novel mononuclear ruthenium(II) complexes [Ru(dmb)₂L]²⁺ [dmb = 4,4′‐dimethyl‐2,2′‐bipyridine, L = imidazo‐[4,5‐f][1,10]phenanthroline (IP), 2‐phenylimidazo‐[4,5‐f][1,10]phenanthroline (PIP), 2‐(4′‐hydroxyphenyl)imidazo‐[4,5‐f] [1,10] phenanthroline (HOP), 2‐(4′‐dimethylaminophenyl) imidazo‐[4, 5‐f] [1,10] phenanthroline (DMNP)] were synthesized and characterized by ES‐MS, ¹H NMR, UV‐vis and electrochemistry. The nonlinear optical properties of the ruthenium(II) complexes were investigated by Z‐scan techniques with 12 ns laser pulse at 540 nm, and all of them exhibit both nonlinear optical (NLO) absorption and self‐defocusing effect. The corresponding effective NLO susceptibility |x³| of the complexes is in the range of 2.68 × 10^?12‐4.57 × 10^?12 esu.     

Electrochemical Characteristics of Poly(<Emphasis Type="Italic">o</Emphasis>-Aminobenzoic Acid) Modified Glassy-Carbon Electrode and Its Electrocatalytic Activity towards Oxidation of Epinephrine

Poly(o-aminobenzoic acid) (o-ABA) film is deposited on glassy-carbon electrode (GCE) by electropolymerization in pH 7.0 phosphate buffer solution (PBS). Electrochemical behavior of modified electrode is investigated by electrochemical impedance spectroscopy (EIS), different pulse voltammetry (DPV), and cyclic voltammetry (CV). The results indicate that there is a greater resistance during the electron transfer process in poly(o-ABA) film than in bare GCE for the redox of [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻. Further research indicates that epinephrine (EP) can be strongly absorbed on the surface of the poly(o-ABA) film-modified electrode. The modified electrode shows an excellent electrocatalytical activity on EP oxidation. The EP cathodic peak potential shifts negatively with a slope of −53.5 mV/pH, indicating that equal amounts of proton and electron are involved in the electrode reaction process. In pH 7.0 PBS, the peak current of EP and the concentration has a linear relationship from 0 to 65 μM by amperometric current-time curve. __________ From Elektrokhimiya, Vol. 41, No. 9, 2005, pp. 1059–1065. Original English Text Copyright ? 2005 by Cheng, Jin, Zhang. The text was submitted by the authors in English.     

Derivatives of the 21-tungsto-9-antimonate heteropolyanion. Part 2. Addition of transition metal cations

Ammonium salts of five new heteropolytungstates, [NaSb₉W₂₁O₈₆M₃]^12,9− (M=Mn^II, Fe^III, Co^II, Ni^II, Cu^II) have been prepared and characterized by elemental analysis, visible and i.r. spectroscopy, magnetic susceptibility measurements, and cyclic voltammetry. Evidence for ligand substitution at the M cation centres is presented, and possible binding sites for M on the polyanion surface are discussed.     

Synthesis and Structural Characterization of a Binuclear Mixed‐Ligand (Salicylate and N,N‐diethylnicotinamide) Nickel(II) Complex,Its Magnetic Properties. [Ni2(µ‐Sal)4(Dena)2]H2O

The title complex of [Ni₂(µ‐Sal)₄(Dena)₂]H₂O, [( µ‐tetrakissalicylato‐κ‐O,O)(bis‐N,N‐diethylnicotinamide‐κ‐N)(binickel(II))]hydrate, C₄₈H₅₂Ni₂N₄O₁₆, has been synthesized and explained as structural using some elemental analysis, FT‐IR spectra, UV‐Vis reflectance, magnetic measurements, thermal analysis and x‐ray diffraction methods. The analysis results showed that the unit cell of complex includes two molecules Ni^II cation, four molecules salicylates as bridge and two molecules N,N‐diethylnicotinamide ligands, also there is one molecule hydrated aqua. The compound crystallizes in the monoclinic space group P2₁/c with the following unit‐cell parameters: a =13.6776(6) Å, b =10.5238(3) Å, c =21.8165(9), α=90.00°, β=126.546(3)°, γ=90.00º and Z=2. The compound [Ni₂(µ‐Sal)₄(Dena)₂]H₂O is a typical paddle‐wheel complex structure. Two Ni^II ions are bridged by four salicylate ligands (O2, O2ⁱ, O3, O3ⁱ, O5, O5ⁱ, O6 and O6ⁱ) using a µ‐COO^? coordination mode [symmetry code: (i) 1‐x, 1‐y, 1‐z]. Each Ni^II also coordinates to one nitrogen atom (N1 and N1ⁱ) from one N,N‐diethylnicotinamide ligand molecule in the axial position. The complex has strong paramagnetic properties.     

Octacyanidorhenate(V) Ion as an Efficient Linker for Hysteretic Two‐Step Iron(II) Spin Crossover Switchable by Temperature,Light, and Pressure

A two‐step hysteretic Fe^II spin crossover (SCO) effect was achieved in programmed layered Cs{[Fe(3‐CNpy)₂][Re(CN)₈]}?H₂O ( 1 ) (3‐CNpy=3‐cyanopyridine) assembly consisting of cyanido‐bridged Fe^II‐Re^V square grid sheets bonded by Cs⁺ ions. The presence of two non‐equivalent Fe^II sites and the conjunction of 2D bimetallic coordination network with non‐covalent interlayer interactions involving Cs⁺, [Re^V(CN)₈]^3? ions, and 3‐CNpy ligands, leads to the occurrence of two steps of thermal SCO with strong cooperativity giving a double thermal hysteresis loop. The resulting spin‐transition phenomenon could be tuned by an external pressure giving the room‐temperature range of SCO, as well as by visible‐light irradiation, inducing an efficient recovery of the high‐spin Fe^II state at low temperatures. We prove that octacyanidorhenate(V) ion is an outstanding metalloligand for induction of a cooperative multistep, multiswitchable Fe^II SCO effect.     

Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.