Novel nano molten salt tetra‐2,3‐pyridiniumporphyrazinato‐oxo‐vanadium tricyanomethanide as a vanadium surface‐free phthalocyanine catalyst: Application to Strecker synthesis of α‐aminonitrile derivatives

Efficient and recyclable novel nano tetra‐2,3‐pyridiniumporphyrazinato‐oxo‐vanadium tricyanomethanide, {[VO(TPPA)][C(CN)₃]₄}, as a vanadium surface‐free phthalocyanine‐based molten salt catalyst was successfully designed, produced and used for the Strecker synthesis of α‐aminonitrile derivatives through a one‐pot three‐component reaction between aromatic aldehydes, trimethylsilyl cyanide and aniline derivatives under neat conditions at 50 °C. This catalyst was well characterized using Fourier transform infrared, UV–visible, X‐ray photoelectron and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and high‐resolution transmission electron microscopies, inductively coupled plasma mass spectrometry and thermogravimetric analysis. The catalyst can be simply recovered and reused several times without significant loss of catalytic activity.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

Synthesis of a New Chiral Source, (1R,2S)‐1‐Phenylphospholane‐2‐carboxylic Acid,via a Key Intermediate α‐Phenylphospholanyllithium Borane Complex: Configurational Stability and X‐ray Crystal Structure of an α‐Monophosphinoalkyllithium Borane Complex

A synthetic route to enantiomerically pure (1R,2S)‐1‐phenylphospholane‐2‐carboxylic acid ( 1 ), which is a phosphorus analogue of proline, has been established. A key step is the deprotonation–carboxylation of the 1‐phenylphospholane borane complex 3 by using sBuLi/1,2‐dipiperidinoethane (DPE). Configurational stability of the key intermediate, the amine‐coordinated α‐phosphinoalkyllithium borane complex 4 , was investigated by employing lithiodestannylation–carboxylation of both diastereomers of the 1‐phenyl‐2‐trimethylstannylphospholane borane complex 7 in the presence of several kinds of amines, and as a result, 4 was found to be configurationally labile even at ?100 °C. The key intermediate, the DPE‐coordinated trans‐1‐phenyl‐2‐phospholanyllithium borane complex 9 , was isolated, and the structure was identified by X‐ray crystal structure analysis. This is the first X‐ray crystal structure determined for an α‐monophosphinoalkyllithium borane complex. Remarkably, the alkyllithium complex is monomeric and tricoordinate at the lithium center with a slightly pyramidalized environment, and the existence of a Li? C bond (2.170 Å) has been confirmed. Moreover, ¹H–⁷Li HOESY and ⁶Li NMR analyses suggested the structure of 9 in solution as well as the existence of an equilibrium between 9 , its cis isomer, and the ion pair 8 at room temperature, which was extremely biased towards 9 at ?100 °C. Finally, 1 was used as a chiral ligand in a palladium‐catalyzed allylic substitution, and the desired product was obtained in high yield with good enantioselectivity.     

Crystallization behavior of isotactic propylene‐1‐hexene random copolymer revealed by time‐resolved SAXS/WAXD techniques

The crystallization behavior of isotactic propylene‐1‐hexene (PH) random copolymer having 5.7% mole fraction of hexene content was investigated using simultaneous time‐resolved small‐angle X‐ray scattering (SAXS) and wide‐angle X‐ray diffraction (WAXD) techniques. For this copolymer, the hexene component cannot be incorporated into the unit cell structure of isotactic polypropylene (iPP). Only α‐phase crystal form of iPP was observed when samples were melt crystallized at temperatures of 40 °C, 60 °C, 80 °C, and 100 °C. Comprehensive analysis of SAXS and WAXD profiles indicated that the crystalline morphology is correlated with crystallization temperature. At high temperatures (e.g., 100 °C) the dominant morphology is the lamellar structure; while at low temperatures (e.g., 40 °C) only highly disordered small crystal blocks can be formed. These morphologies are kinetically controlled. Under a small degree of supercooling (the corresponding iPP crystallization rate is slow), a segmental segregation between iPP and hexene components probably takes place, leading to the formation of iPP lamellar crystals with a higher degree of order. In contrast, under a large degree of supercooling (the corresponding iPP crystallization rate is fast), defective small crystal blocks are favored due to the large thermodynamic driving force and low chain mobility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 26–32, 2010     

Achieving High‐Temperature Stability of Metastable α‐MoC1‐x by Suppressing Phase Transformation with Mounted Atoms for Lithium Storage Performance

Despite a significant advancement in preparing metastable materials, one common problem is the strict and precious reaction conditions due to their metastable structures. Herein, we achieved the preparation of high‐temperature stabilized metastable α‐MoC_1?x by mounting zinc atoms into its lattice structure. Such a structural construction could suppress the phase transformation from α‐MoC_1?x to β‐Mo₂C through restricting the displacement of Mo atoms upon increased temperature. The resultant metastable α‐MoC_1?x can be stabilized up to 1000 °C and this stability temperature is the highest for the metastable α‐MoC_1?x so far. Synchrotron X‐ray absorption spectroscopy (XAS) and X‐ray photoelectron spectroscopy (XPS) confirm the structure of Zn‐mounted α‐MoC_1?x. Density functional theory (DFT) calculations reveal that the introduction of the Zn atoms in the lattice structure of α‐MoC_1?x could significantly decrease the energy difference (ΔE) between α‐MoC_1?x and β‐Mo₂C, thus effectively suppressing the phase transformation from α‐MoC_1?x to β‐Mo₂C and accordingly maintaining the high‐temperature stability of α‐MoC_1?x. This novel strategy can be used as a universal method to be extended to synthesize metastable α‐MoC_1?x from different precursors or other mounted elements. Moreover, the optimal product exhibits excellent lithium storage performances in terms of the cycling stability and rate performance.     

Physiochemical properties and novel biological applications of Callistemon viminalis‐mediated α‐Cr2O3 nanoparticles

We report an eco‐friendly synthesis of α‐Cr₂O₃ nanoparticles (NPs) using Callistemon viminalis (Bottle Brush) flower extracts as an efficient reducing and capping agent. NPs of sizes 15 nm and 17 nm were synthesized by annealing them at 400°C and 500°C, respectively, which were characterized by X‐ray diffraction, UV–Vis, Fourier transform‐infrared, high‐resolution‐transmission electron microscopy/scanning electron microscopy, SAED, energy‐dispersive X‐ray spectroscopy and SQUID. Microplate‐based assay was used for examining antibacterial potential against 12 pathogenic bacterial strains, and their minimum inhibitory concentrations were calculated. MTT cytotoxic assay was accomplished on Leishmania tropica amastigotes and promastigotes, which revealed IC₅₀ values of 44 μg/ml and 10.56 μg/ml, respectively. An IC₅₀ value of 46.32 μg/ml was obtained for HepG2 cancer cells. Enzyme inhibition studies indicated good acetylcholinesterase, moderate butyrylcholinesterase and low alpha‐glucosidase inhibition. Hemolytic assay indicated hemocompatibility at low concentration. In addition, good DPPH radical scavenging and moderate reducing power and total antioxidant potential was revealed by α‐Cr₂O₃ NPs.     

Synthesis,characterization and application of 3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate as nanostructured catalyst for the tandem reaction of β‐naphthol with aromatic aldehydes and amide derivatives

3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate {[Msim]FeCl₄} was prepared and fully characterized by fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX) and vibrating sample magnetometer (VSM) and used, as an efficient catalyst, for the tandem reaction of β‐naphthol with aromatic aldehydes and benzamide at 110 °C under solvent‐free conditions to give 1‐amidoalkyl‐2‐naphthols in high yields and very short reaction times.     

Design,synthesis, characterization and catalytic performance of a new cellulose‐based magnetic nanocomposite in the one‐pot three‐component synthesis of α‐aminonitriles

A sulfonated magnetic cellulose‐based nanocomposite was prepared and characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. Then, it was used as a green nanocatalyst for the synthesis of α‐aminonitriles by a one‐pot three‐component condensation reaction of aldehydes or ketones, amines and trimethylsilylcyanide in ethanol at room temperature. The reaction procedure is simple, yields are very high, reaction time is very short and the catalyst can be easily separated from the reaction mixture and reused in subsequent reactions without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

The Stereochemical Course of the α‐Hydroxyphosphonate–Phosphate Rearrangement

The phosphonate–phosphate rearrangement is an isomerisation of α‐hydroxyphosphonates bearing electron‐withdrawing substituents at the α‐carbon atom. We studied the stereochemical course of this rearrangement with respect to phosphorus. A set of four diastereomeric α‐hydroxyphosphonates was prepared by a Pudovik reaction from two diastereomeric cyclic phosphites. The hydroxyphosphonates were separated and rearranged with Et₃N as base. In analogy to trichlorphon, which was the first reported compound undergoing this rearrangement. All four hydroxyphosphonates could be rearranged to 2,2‐dichlorovinyl phosphates. Single‐crystal X‐ray structure analyses of the α‐hydroxyphosphonates and the corresponding phosphates allowed us to show that the rearrangement proceeds with retention of configuration on the phosphorus atom.     

Solid State Reactions in the Al‐Si‐C System

The study is aimed to prevent the formation of the aluminium carbide compound Al₄C₃ that negatively affects Al‐Si‐C based materials. The reaction products of elementary aluminium, silicon and graphite as well as aluminium with either β‐SiC or α‐SiC without and with graphite at temperatures 1200°‐2500 °C under different atmospheres and reaction times were characterized using powder X‐ray diffraction and scanning electron microscopy (SEM) with an energy dispersive X‐ray (EDX) analysis. The results of the powder diffraction study show that under the conditions (1450 °C; 8 h; vacuum) the formation of Al₄C₃ could be prevented. The reaction products at those conditions consist of the ternary compound Al₄SiC₄ besides SiC and residual carbon. The ternary aluminium silicon carbide Al₄SiC₄ crystallizes in a hexagonal crystal system with unit cell dimensions a = 327.64(4) pm, b = 2171.2(6) pm and space group P6₃mc (no. 186). The crystal structure of Al₄SiC₄ is isostructural with Al₅C₃N and consists of layers of Al₄C₃ and SiC.     

Synthesis,X‐ray crystal structure and biological activities of α‐phenoxyl‐1,2,3‐thiadiazoleacetamide

The annelation of 1,2,3‐thiadiazole rings was accomplished by the reaction of N‐acylhydrazone 2a bearing an adjacent α‐methyl with thionyl chloride to give α‐chloro‐N‐methyl‐1,2,3‐thiadiazole‐4‐acetamide 4 and was demonstrated by the X‐ray crystal structure of its derivative 5a. A novel series of α‐substituted phenoxy‐N‐methyl‐1,2,3‐thiadiazole‐4‐acetamide 5 were synthesized through the reaction of the compound 4 and phenols. The results of bioassays show that the title compounds exhibit good anti‐HBV activities. The crystal of compound 5a , N‐methyl‐α‐2‐bromophenyl‐1,2,3‐thiadiazole‐4‐acetamide, has been prepared and determined by X‐ray diffraction.     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Synthesis,Characterization and Crystal Structure of 4‐Amino‐1,2,4‐Δ2‐triazoline‐5‐thione and its Silver(I) Complex

The reaction of 4‐amino‐1,2,4‐Δ²‐triazoline‐5‐thione (ATT, 1 ) with AgNO₃ in methanol led to the complex [Ag(ATT)₂]NO₃ ( 2 ). 2 was characterized by elemental analyses, ¹H NMR, IR, and Raman spectroscopy as well as single‐crystal X‐ray diffraction. The molecular structure of 1 was also determined by single crystal X‐ray analysis. Crystal data for 1 at ?80 C: space group C2/c with a = 2107.4(2), b = 1425.1(1), c = 688.4(1) pm, β = 104.55(1)°, Z = 16, R₁ = 0.0514, crystal data for 2 at ?80 °C: space group P2₁/c with a = 675.7(1), b = 1321.1(1), c = 1311.2(1) pm, β = 90.03(1)°, Z = 4, R₁ = 0.0437.     

Synthesis and properties of aromatic polyimides derived from 2,2,′3,3′‐biphenyltetracarboxylic dianhydride

2,2,′3,3′‐Biphenyltetracarboxylic dianhydride (2,2,′3,3′‐BPDA) was prepared by a coupling reaction of dimethyl 3‐iodophthalate. The X‐ray single‐crystal structure determination showed that this dianhydride had a bent and noncopolanar structure, presenting a striking contrast to its isomer, 3,3,′4,4′‐BPDA. This dianhydride was reacted with aromatic diamines in a polar aprotic solvent such as N,N‐dimethylacetamide (DMAc) to form polyamic acid intermediates, which imidized chemically to polyimides with inherent viscosities of 0.34–0.55 dL/g, depending on the diamine used. The polyimides from 2,2,′3,3′‐BPDA exhibited a good solubility and were dissolved in polar aprotic solvents and polychlorocarbons. These polyimides have high glass transition temperatures above 283°C. Thermogravimetric analyses indicated that these polyimides were fairly stable up to 500°C, and the 5% weight loss temperatures were recorded in the range of 534–583°C in nitrogen atmosphere and 537–561°C in air atmosphere. All polyimides were amorphous according to X‐ray determination. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1425–1433, 1999     

Self‐assembled three‐dimensional flower‐like α‐Fe2O3 nanostructures and their application in catalysis

Three‐dimensional flower‐like α‐Fe₂O₃ nanostructures have been successfully synthesized by a simple surfactant‐free environmental friendly solvolthermal process. The as‐prepared products were investigated by X‐ray powder diffraction, transmission electron microscopy, and field emission scanning electron microscopy. By adjusting the synthetic parameters, the shape of the α‐Fe₂O₃ nanostructures can be controlled. The three‐dimensional flower‐like α‐Fe₂O₃ nanostructures were found to be highly active as catalysts for phenol alkylation. The effects of various parameters, such as reaction temperature, reaction time and the amount of catalyst, were studied. The catalyst was stable and could be reused three times in normal atmosphere without suffering appreciable loss in catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and structure of new types of organogermanium compounds containing α‐amino acid or α‐aminophosphonic acid moieties

A series of germasesquioxides and germatranes containing α‐amino acid or α‐aminophosphonic acid moieties was synthesized by the reaction of β‐trichlorogermylpropionyl chloride with α‐amino acid esters or α‐aminophosphonates. The structures of all products were confirmed by ¹H NMR, ³¹P NMR, and IR spectra, and elemental analyses. The intramolecular monocyclic penta‐coordinated structure of the trichlorogermyl intermediate was determined by X‐ray diffraction. The X‐ray analyses showed that the geometry about the germanium atom was a slightly distorted trigonal bipyramid, and a coordinate covalent bond exists between the oxygen and the germanium atoms. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 73–78, 1999     

Deposition of copper‐doped iron sulfide (CuxFe1−xS) thin films using aerosol‐assisted chemical vapor deposition technique

Copper‐doped iron sulfide (Cu_xFe_1?xS, x = 0.010–0.180) thin films were deposited using a single‐source precursor, Cu(LH)₂Cl₂ (LH = monoacetylferrocene thiosemicarbazone), by aerosol‐assisted chemical vapor deposition technique. The Cu‐doped FeS thin films were deposited at different substrate temperatures, i.e. 250, 300, 350, 400 and 450 °C. The deposited thin films were characterized by X‐ray diffraction (XRD) patterns, Raman spectra, scanning electron microscopy, energy dispersive X‐ray analysis (EDX) and atomic force microscopy. XRD studies of Cu‐doped FeS thin films at all the temperatures revealed formation of single‐phase FeS structure. With increasing substrate temperature from 250 to 450 °C, there was change in morphology from wafer‐like to cylindrical plate‐like. EDX analysis showed that the doping percentage of copper increased as the substrate temperature increased from 250 to 450 °C. Raman data supports the doping of copper in FeS films. Copyright © 2010 John Wiley & Sons, Ltd.     

Acceleration effects of 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene with 2‐methylimidazole‐intercalated α‐zirconium phosphate as a latent thermal initiator in the reaction of glycidyl phenyl ether and hexahydro‐4‐methylphthalic anhydride

The catalytic effects of 1,5,7‐Triazabicyclo[4.4.0]dec‐5‐ene (TBD) with 2‐methylimidazole‐intercalated α‐zirconium phosphate (α‐ZrP?2MIm) in the reaction of glycidyl phenyl ether (GPE) and hexahydro‐4‐methylphthalic anhydride (MHHPA) were investigated. The reaction did not proceed within 1 h at 60 °C. On increasing the temperature to 100 °C, the conversion reached 93% for 1 h. Without the addition of TBD, the conversion was 67% at 100 °C for 1 h. Under storage conditions at 25 °C for 7 days, the conversion of GPE was only 18%. The curing behavior of 2,2‐bis(4‐glycidyloxyphenyl)propane (DGEBA) and MHHPA in the presence of TBD with α‐ZrP?2MIm was evaluated by differential scanning calorimetry. The addition of TBD with α‐ZrP?2MIm as a latent thermal initiator, the storage stability was maintained and the reaction proceeded rapidly under heating conditions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2557–2561     

Nickel‐Catalyzed α‐Arylation of Ketones with Phenol Derivatives

The nickel‐catalyzed α‐arylation of ketones with readily available phenol derivatives (esters and carbamates) provides access to useful α‐arylketones. For this transformation, 3,4‐bis(dicyclohexylphosphino)thiophene (dcypt) was identified as a new, enabling, air‐stable ligand for this transformation. The intermediate of an assumed C? O oxidative addition was isolated and characterized by X‐ray crystal‐structure analysis.     

Physicochemical characterization of α‐chitin, β‐chitin,and γ‐chitin separated from natural resources

We isolated α‐chitin, β‐chitin, and γ‐chitin from natural resources by a chemical method to investigate the crystalline structure of chitin. Its characteristics were identified with Fourier transform infrared (FTIR) and solid‐state cross‐polarization/magic‐angle‐spinning (CP–MAS) ¹³C NMR spectrophotometers. The average molecular weights of α‐chitin, β‐chitin, and γ‐chitin, calculated with the relative viscosity, were about 701, 612, and 524 kDa, respectively. In the FTIR spectra, α‐chitin, β‐chitin, and γ‐chitin showed a doublet, a singlet, and a semidoublet at the amide I band, respectively. The solid‐state CP–MAS ¹³C NMR spectra revealed that α‐chitin was sharply resolved around 73 and 75 ppm and that β‐chitin had a singlet around 74 ppm. For γ‐chitin, two signals appeared around 73 and 75 ppm. From the X‐ray diffraction results, α‐chitin was observed to have four crystalline reflections at 9.6, 19.6, 21.1, and 23.7 by the crystalline structure. Also, β‐chitin was observed to have two crystalline reflections at 9.1 and 20.3 by the crystalline structure. γ‐Chitin, having an antiparallel and parallel structure, was similar in its X‐ray diffraction patterns to α‐chitin. The exothermic peaks of α‐chitin, β‐chitin, and γ‐chitin appeared at 330, 230, and 310, respectively. The thermal decomposition activation energies of α‐chitin, β‐chitin, and γ‐chitin, calculated by thermogravimetric analysis, were 60.56, 58.16, and 59.26 kJ mol^?1, respectively. With the Arrhenius law, ln β was plotted against the reciprocal of the maximum decomposition temperature as a straight line; there was a large slope for large activation energies and a small slope for small activation energies. α‐Chitin with high activation energies was very temperature‐sensitive; β‐Chitin with low activation energies was relatively temperature‐insensitive. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3423–3432, 2004