Determination of niobium in pyrochlore ore by differential pulse polarography

A differential pulse polarographic method has been developed for the quantitative determination of niobium in pyrochlore ore. One-step polarographic curves were obtained in 0.01 mol L(-1) EDTA as supporting electrolyte. Analytical curves indicated that response was linearly dependent on Nb(V) concentration between 1.6 and 8.6 mg L(-1) in the pH range 2-5. The system is quasi-reversible and controlled by diffusion in 0.01 mol L(-1) EDTA as supporting electrolyte; the electrode process involves one-electron reduction of Nb(V) to Nb(IV). The results obtained so far for niobium in pyrochlore ore were comparable with those obtained by X-ray fluorescence determination. Ions such as Fe(III), Cr(III), As(III), Cu(II), Ni(II), Co(II), Mn(II), Sn(IV), Zn(II), V(V), Ta(V), W(VI), Ce(IV), and Ti(IV) did not interfere. Possible interference from Pb(II) can be avoided by complexation with the supporting electrolyte in the pH range 3.5 to 4.6; Mo(VI) ions can be tolerated when their concentration is one-tenth that of Nb(V).     

Test analysis method using ion pairs of pyrocatechol azo derivatives and trihydroxyfluorones with cetylpyridinium and their chelates with metal ions immobilized on paper

A two-stage procedure is proposed for the immobilization of ion pairs of pyrocatechol azo derivatives and trihydroxyfluorones and their chelates with metal ions on paper. It is demonstrated that ion pairs of phenylfluorone and thiazolylazopyrocatechol with cetylpyridinium can be used for the test determination of 0.01-10 mg/L Ti(IV), 0.05-20 mg/L Mo(VI), and 0.1–20 mg/L W(VI) and V(V) by the length of the colored zone of test strips after their contact with a test solution and for the determination of 0.01-0.5 mg/L Al and Mo(VI) and 0.001-0.1 mg/L Ti(IV) by the color intensity of reactive papers after passing a test solution. Chelates of Mo(VI) with tiazolylazopyrocatechol and of Sb(III) with phenylfluorone are used for the test determination of 0.01-1000 mg/L cationic surfactants. The selectivity of reactions is studied, and procedures are proposed for the determination of the above elements in different materials. The relative standard deviation of the results of analysis is no higher than 50%.     

Investigation of removal of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) oxy-ions from industrial waste-waters by adsorption and electrosorption at high-area carbon cloth

Adsorption and electrosorption of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) ions from water samples at low concentration were studied at high-area C-cloth electrodes. The concentrations of ions in the solution were monitored using in situ UV spectroscopy. All the investigated ions, except V(IV), showed better adsorption in acidic media. Positive polarization of the C-cloth caused increased adsorption of Cr(VI), Mo(VI), and V(V) ions. When previously adsorbed, Mo(VI) and V(V) ions were shown to be largely desorbable by negative polarization of the C-cloth. Since V(IV) does not become adsorbed significantly at the C-cloth in acidic media, the method provides an interesting means for separation of V(V) and V(IV) species in solution.     

Application of the Weisz Ring oven technique to the separation and identification of micro-quantities of some less familiar cations

Summary Use of the ring oven in separation and identification of mixtures of less familiar metal ions has been described. Separation of metal ions from the following mixtures has successfully been carried out: 1. UO₂(II) and Th(IV), 2. Th(IV) and Ce(IV), 3. Pd(II) and Au(III), 4. Pt(IV) and Au(III), 5. Ce(III) and Ce(IV), 6. UO₂(II), Th(IV) and Ti(IV), 7. Th(IV), Ti(IV) and Ce(IV), 8. Th(IV), Ce(IV) and Zr(IV), 9. Ti(IV), V(V) and Zr(IV), 10. Mo(VI), V(V) and W(VI) and 11. Be(II), Al(III) and Mg(II). In the case of binary mixtures, the separation was in the form of a central spot and a concentric ring; in ternary mixtures the metals were precipitated in a central spot and two concentric rings.

---

Zusammenfassung Zur Trennung und Identifizierung folgender Gemische seltenerer Metallionen wurde der Ringofen mit Erfolg verwendet: 1. UO₂(II) und Th(IV), 2. Th(IV) und Ce(IV), 3. Pd(II) und Au(III), 4. Pt(IV) und Au(III), 5. Ce(III) und Ce(IV), 6. UO₂(II), Th(IV) und Ti(IV), 7. Th(IV), Ti(IV) und Ce(IV). 8. Th(IV), Ce(IV) und Zr(IV), 9. Ti(IV), V(V) und Zr(IV), 10. Mo(VI), V(V) und W(VI) und 11. Be(II), Al(III) und Mg(II). Bei binären Gemischen erfolgt die Trennung in einen zentralen Fleck und einen Ring, bei ternären Mischungen in einen Fleck und zwei konzentrische Ringe.

---

Résumé On a décrit l'utilisation du four annulaire pour la séparation et l'identification de mélanges d'ions métalliques moins courants. On a effectué la séparation des ions métalliques à partir des mélanges suivants: 1. UO₂(II) et Th(IV), 2. Th(IV) et Ce(IV), 3. Pd(II) et Au(III), 4. Pt(IV) et Au(III), 5. Ce(III) et Ce(IV), 6. UO₂(II), Th(IV) et Ti(IV), 7. Th(IV), Ti(IV) et Ce(IV), 8. Th(IV), Ce(IV) et Zr(IV), 9. Ti(IV), V(V) et Zr(IV), 10. Mo(VI), V(V) et W(VI) et 11. Be(II), Al(III) et Mg(II). Dans le cas des mélanges binaires, la séparation se présentait sous forme d'une tache centrale et d'un anneau concentrique; chez les mélanges ternaires, les métaux étaient précipités en une tache centrale et deux anneaux concentriques.

     

Thin-layer chromatography of inorganic ions on polyethyleneimine cellulose in sulfuric acid and acid-ammonium sulfate media

Summary The thin-layer chromatographic behavior of 49 inorganic ions on polyethyleneimine (PEI) cellulose, a weakly basic anion-exchanger, has been systematically studied in sulfuric acid and ammonium sulfate media (both 0.01–1.0 moldm⁻³). The sorption on the cellulose decreases with increasing concentration of the acid or sulfate for most of the ions and to a lesser extent for Hg(II), Bi(III), Th(IV), Nb(V), and U(VI). The R_f values of Pd(II), Ru(III), Au(III), Pt(IV), and Ta(V) are extremely low in both systems. Ba(II), Pb(II), Sb(III), Mo(VI), and W(VI) are also strongly retained on the layer. Oxy-anions such as As(III) and Se(VI) are not adsorbed on the cellulose to any great extent, but Re(VII) distributes on the plate with a R_f value of about 0.5. The characteristic retention on PEI-cellulose layer of several polyvalent ions, which form anionic sulfato complexes, can be observed in ammonium sulfate media. Possibilities for separations of analytical interest are also demonstrated in both systems.     

Chromatography of inorganic ions on polyethyleneimine cellulose layer in hydrochloric acid — Ammonium thiocyanate media

Summary Thin-layer chromatographic behavior of 58 inorganic ions on polyethyleneimine (PEI) cellulose has been systematically surveyed in hydrochloric acid — ammonium thiocyanate media. In this media most of the ions distribute chromatographically on the layer. Ag(I), Hg(II), Pd(II), Au(III), Bi(III), Ru(III), Pt(IV), Nb(V), Ta(V), Mo(VI), and W(VI) are strongly retained, while alkali earths(II), Mg(II), As(III), Ti(IV), and Te(VI) are not absorbed to any great extent in this system. An interesting correlation was found between the R_f values on PEI-cellulose in the thiocyanate media and the paramagnetic moment of the rare earths(III). An oddeven fluctuation against the atomic number is also found for the heavy rare earths(III). Chromatographic separation of many inorganic ions of analytical interest is demonstrated in this system.     

The application of the spectroelectrochemical method in the studies of molybdenum,tungsten, and uranium in chloride melts

The behavior of molybdenum(III), tungsten(IV), and uranium(VI) ions in NaCl-2CsCl-eutectic-mixture-based melt at 550°C is studied by spectroelectrochemical method. Anodic oxidation of MoCl₆³⁻ and WCl₆²⁻ yields melt-soluble chloride compounds MoCl₆²⁻ and WCl₆⁻ respectively. It is shown that the electrochemical recharging in the Mo(III)/Mo(IV) system is reversible; the formal standard potential E*_{Mo(IV)/Mo(III)}and the Gibbs energy $ \Delta G_{MoCl_4 (melt)}^* $ \Delta G_{MoCl_4 (melt)}^* are evaluated. The cathodic reduction of U(VI) yields U(V) ions. The cathodic reduction of W(IV) ion does not yield melt-soluble tungsten compounds of lower oxidation state.     

Extraction of metal ions with a primary amine

This paper describes some experimental results obtained at the extraction of sulfate solutions of U(VI), Mo(VI), V(V), Ce(IV), Zr(IV), Fe(III), Al(III) with a benzene solution of Primene JMT. The aqueous solutions consist of metal sulfates (or other metal salts) in the presence of sulfuric acid with a concentration range of 0–2.1 mol·dm^–3, the concentration of amine in the organic phase being 0.1–0.3 mol·dm^–3. The presence of various species of metal ions in the aqueous phase is considered and the equilibrium concentration of substances extracted in the organic phase is determined. On the basis of the results of chemical analysis (concentration of metals and sulfate ions) the composition of the prevailing complexes in the organic phase is proposed.     

A chelating resin containing 1-(2-thiazolylazo)-2-naphthol as the functional group; synthesis and sorption behavior for trace metal ions

A new polystyrene-divinylbenzene resin containing 1-(2-thiazolylazo)-2-naphthol (TAN) functional group was synthesized and its sorption behavior for 19 metal ions including Zr(IV), Hf(IV) and U(VI) was investigated by batch and column experiments. The chelating resin showed a high sorption affinity for Zr(IV) and Hf(IV) at pH 2. Some parameters affecting the sorption of the metal ions are detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(IV) and Hf(IV) that were higher than those of the other metal ions were 0.92 and 0.87 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as: Zr(IV)>Hf(IV)>Th(IV)>V(V)>Nb(V)>Cu(II)>U(VI)>Ta(V)>Mo(VI)>Cr(III)>Sn(IV)>W(VI). Quantitative recovery of most metal ions except Zr(IV) was achieved using 2 M HNO₃. Desorption and recovery of Zr(IV) was successfully performed with 2 M HClO₄ and 2 M HCl.     

2,3,7-Trihydroxyfluorones immobilized on cellulose matrices in test methods for determining rare elements

It was shown that 2,3,7-trihydroxyfluorones immobilized by adsorption on cellulose matrices can be used as reagents for the test determination of Mo(VI), Ti(IV), Ge(IV), Hf(IV), Nb(V), Ta(V), W(VI), Bi(III), V(IV), and Zr(IV). The change of the protolytic and complexing properties of trihydroxyfluorones immobilized on cellulose matrices was considered in comparison to corresponding properties in a solution. It was found that the reactions of trihydroxyfluorones with rare elements on cellulose matrices and in a solution exhibit similar effects upon the addition of cetylpyridinium. These effects are the bathochromic shift of the absorption maxima of the reagents and their complexes with analytes and the extension of the range of optimum acidity for complex formation. The complexation of salicylfluorones with the titanium(IV) in solution and on cellulose paper was studied by IR spectrometry. Phenylfluorone immobilized on a mixed-fiber cloth as used in test determinations of (mg/L) 0.05–5 Ti(IV), V(IV), Hf(IV), Nb(V), and Mo(VI); 0.01–5 Ge(IV) and Zr(IV); 0.05–1 Bi(III) and W(VI); and 0.1–5 Ta(V) by the color intensity of the indicator matrix after passing through 20 mL of a test solution. It was shown that phenylfluorone immobilized on cellulose paper can be used to determine (mg/L) 0.05–50 Ti(IV), 0.5–1000 Ge(IV), 0.5–500 Zr(IV), 5–200 Bi(III), 0.1–50 Mo(VI), 0.1–1000 V(IV), 0.1–100 Nb(V), 0.1–800 Hf(IV), 1–100 Ta(V), and 1–800 W(VI) by the length of the colored zone of a test strip after it was brought into contact with a test solution.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Separation of rhenium by thin-layer chromatography with polyethyleneimine cellulose in hydrochloric acid media

Summary The thin-layer chromatographic behavior of 49 inorganic ions on polyethyleneimine (PEI) cellulose has been investigated in hydrochloric acid media (0.01–1.0 mol dm⁻³). The sorption on the cellulose decreases with increasing acid concentration for most of the ions, but As(III), Ti(IV) and Te(VI) do not exhibit any R_f variation with the acid concentration. The R_f spectra of TI(I), Cd(II), Pb(II) and Zn(II) have a maximum. Ag(I), Bi(III), Nb(V), Ta(V), Mo(VI) and W(VI) are retained tightly on the layer, due to either insoluble salt formation or extensive hydrolysis. The extremely low R_f values of Hg(II), Pd(II), Au(III), Ru(III) and Pt(IV) are accounted for by stability of their chlorocomplexes. Re(VII) distributes chromatographically, having moderate R_f values between 0.3 and 0.6, so that the selective separation of Re(VII) from the other ions is feasible.     

The polarographic determination of traces of titanium-(IV) in the presence of n-benzoyl-n-phenylhydroxylamine

The polarographic behavior of the titanium(IV)-N-benzoyl-N-phenyl-hydroxylamine (BPHA) system in acidic medium and in water-ethanol mixtures has been studied. In (1+3) water-ethanol containing 2 M sulfuric acid and 0.05 M BPHA, titanium(IV) gives a single kinetically controlled wave. Titanium(IV) can be determined at concentrations as low as 5·10^-6M, in the presence of Fe(III), Cu(II), V(V), etc., but Cd(II), Sn(II and IV), As(V), U(VI) and Mo(VI) interfere.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Rapid and selective method for the spectrophotometric determination of tin using potassium ethylxanthate

Tin (II) forms a yellow complex with potassium ethylxanthate which can be extracted into chloroform. Tin is determined spectrophotometrically by measuring the absorbance at 360 nm. Beer's law is obeyed up to 120 g of Sn in the aqueous phase with a Sandell sensitivity of 0.013 g Sn/cm². Metal ions such as Ti(IV), Cr(VI), Mn(II), Cu(II), Zn(II), Al(III), U(VI), W(VI), Th(IV) and Zr(IV) do not interfere, but Mo(VI), Co(II) and Bi(III) do. Interference due to Fe(II, III), Ni(II) and V(V) is checked by suitable masking agents. Analysis of some synthetic and industrial samples has been carried out by the proposed method.     

Sorption and separation of some elements of nuclear importance using Chelex-100

Chelex-100, in the anionic form has been studied for its ability to perform selective separation and concentration of some metal ions of nuclear importance from mineral acid solutions. The sorption behavior of Zr(IV)–Nb(V), Mo(VI), Tc(VII), Te(IV) and U(VI) from solutions of hydrochloric and sulphuric acids on Chelex-100 has been studied under static and dynamic conditions. Mo(VI) and Tc(VII) have been concentrated on the resin from hydrochloric or sulphuric acid solutions at low acidities probably, as the anions MoO ₄ ^2– and TcO ₄ ^– , respectively. Te(IV) has been isolated from hydrochloric acid solutions of normalities 6 in the form of the anionic chloro complex TeCl ₆ ^2– . Optimum conditions for elution and separation of Mo(VI), Tc(VII), Te(IV) and U(VI) were recommended.     

The Enhancement of the Formation of Wells–Dawson-Type Polyoxometalates by the Addition of High Concentrations of LiCl

Wells–Dawson-type polyoxometalates are formed by heating an acidic Mo(VI) or W(VI) solution containing significantly higher concentrations of hetero ions, P(V) or As(V), than the ideal molar ratio [M]/[X] = 1/9 (M = Mo, W; X = P, As). Most of the phosphate and arsenate remains unreacted in the reaction mixture. These reaction conditions are unusual, even though more reagents than the stoichiometric amounts are frequently needed to obtain complete reactions. In the present study, the replacement of a large amount of unreacted hetero ions containing salts by normal ions (salts) was investigated. The formation of Wells–Dawson-type polyoxometalates, [X₂M₁₈O₆₂]^6? (X = P, As; M = Mo, W), in the presence of LiCl and NaCl was investigated by Raman spectroscopy and ³¹P NMR in aqueous solution. The addition of LiCl enhanced the formation of Wells–Dawson-type polyoxometalates, which formed under solution conditions close to the ideal molar ratio [M]/[X] = 1/9.     

Untersuchungen zur anwendung ternärer komplexe in der photometrie—I Die bestimmung des Titan(IV) mit Tiron in gegenwart von äthylendiamintetraessigsäure

Two model systems and three analytical procedures based on them have been investigated analytically and characterized statistically with the aim of evaluating the application of ternary complexes in photometry. From measurements on the systems Ti(IV), Tiron (TiR^8?₃, procedure I), Ti(IV), Tiron, EDTA (TiR^8?₃, procedure II), Ti(IV), Tiron, EDTA [TiO(HY)R^5?, procedure III], the molar absorptivities, standard deviations, coefficients of variation, calibration data, limits of detection and determination have been calculated, and the possible interferences of 45 ions have been examined. Procedure III is shown to be the least sensitive of the three, but to offer a higher selectivity towards titanium in the presence of Cr(III), Cu(II), Fe(III), Mn(II), Mo(VI), Ni(II), U(VI) and W(VI). The reasons for this are discussed, and some suggestions are offered concerning the intended application of ternary complexes.     

Polyoxometalates functionalized by bisphosphonate ligands: synthesis, structural, magnetic, and spectroscopic characterizations and activity on tumor cell lines

We report the synthesis and characterization of eight new Mo, W, or V-containing polyoxometalate (POM) bisphosphonate complexes with metal nuclearities ranging from 1 to 6. The compounds were synthesized in water by treating Mo(VI), W(VI), V(IV), or V(V) precursors with biologically active bisphosphonates H(2)O(3)PC(R)(OH)PO(3)H(2) (R = C(3)H(6)NH(2), Ale; R = CH(2)S(CH(3))(2), Sul and R = C(4)H(5)N(2), Zol, where Ale = alendronate, Sul = (2-Hydroxy-2,2-bis-phosphono-ethyl)-dimethyl-sulfonium and Zol = zoledronate). Mo(6)(Sul)(2) and Mo(6)(Zol)(2) contain two trinuclear Mo(VI) cores which can rotate around a central oxo group while Mo(Ale)(2) and W(Ale)(2) are mononuclear species. In V(5)(Ale)(2) and V(5)(Zol)(2) a central V(IV) ion is surrounded by two V(V) dimers bound to bisphosphonate ligands. V(6)(Ale)(4) can be viewed as the condensation of one V(5)(Ale)(2) with one additional V(IV) ion and two Ale ligands, while V(3)(Zol)(3) is a triangular V(IV) POM. These new POM bisphosphonates complexes were all characterized by single-crystal X-ray diffraction. The stability of the Mo and W POMs was studied by (31)P NMR spectroscopy and showed that all compounds except the mononuclear Mo(Ale)(2) and W(Ale)(2) were stable in solution. EPR measurements performed on the vanadium derivatives confirmed the oxidation state of the V ions and evidenced their stability in aqueous solution. Electrochemical studies on V(5)(Ale)(2) and V(5)(Zol)(2) showed reduction of V(V) to V(IV), and magnetic susceptibility investigations on V(3)(Zol)(3) enabled a detailed analysis of the magnetic interactions. The presence of zoledronate or vanadium correlated with the most potent activity (IC(50)~1-5 μM) against three human tumor cell lines.     

Liquid-liquid extraction of niobium(V) in the presence of other metals with high molecular mass amines and ascorbic acid

A novel method is proposed for the solvent extraction of niobium(V). A 0.1M solution of Aliquat 336S in xylene quantitatively extracts microgram quantities of niobium(V) from 0.01M ascorbic acid at pH 3.5-6.5. Niobium from the organic phase is stripped with 0.5M nitric acid and determined spectrophotometrically in the aqueous phase as its complex with TAR. The method permits separation of niobium not only from tantalum(V) but also from vanadium(IV), titanium(IV), zirconium(IV), thorium(IV), chromium(III), molybdenum(VI), uranium(VI), iron(III), etc. Niobium from stainless steel was determined with a precision of 0.42%.