Electrochemical impedance spectroscopy and in situ UV‐vis spectroelectrochemistry studies of Poly(N‐vinyl carbazole)/ Polydimethylsiloxane composite electrodes

Poly(N‐vinyl carbazole)/polydimethylsiloxane (PNVCz/PDMS) composite electrodes were prepared by electrochemical polymerization of NVCz monomer onto PDMS‐coated platinum (Pt) and glassy carbon (GC) electrode surfaces to investigate the influence of the insulating constituent, PDMS and process temperature on the capacitive performance of the coated layers. The electrochemical properties of the bilayer coatings were studied by electrochemical impedance spectroscopy and UV‐vis spectroelectrochemistry measurements. The low‐frequencies capacitance values of composite electrodes indicated that the capacitive behaviors of the composites decreased with increasing PDMS content (from 5.0 to 10.0; in wt/v%) in coating solutions at 25 °C, and with decreasing coating temperatures (from 25 °C to ? 15 °C) of PDMS and PNVCz and, more resist PDMS/PNVCz layers formed. Copyright © 2011 John Wiley & Sons, Ltd.     

All‐Polystyrene 3D‐Printed Electrochemical Device with Embedded Carbon Nanofiber‐Graphite‐Polystyrene Composite Conductor

Carbon nanofibres (CNFs) and graphite flake microparticles were added to thermoplastic polystyrene polymer with the aim of making new conductive blends suitable for 3D‐printing. Various polymer/carbon blends were evaluated for suitability as printable, electroactive material. An electrically conducting polystyrene composite was developed and used with commercially available polystyrene (HIPS) to manufacture electrodes suitable for electrochemical experiments. Electrodes were produced and evaluated for cyclic voltammetry of aqueous 1,1’‐ferrocenedimethanol and differential pulse voltammetry detection of aqueous Pb²⁺ via anodic stripping. A polystyrene/CNF/graphite (80/10/10 wt%) composite provides good conductivity and a stable electrochemical interface with well‐defined active geometric surface area. The printed electrodes form a stable interface to the polystyrene shell, give good signal to background voltammetric responses, and are reusable after polishing.     

Disposable Injection‐Moulded Cell‐on‐a‐Chip Microfluidic Devices with Integrated Conducting Polymer Electrodes for On‐Line Voltammetric and Electrochemiluminescence Detection

This work reports the construction and characterization of plastic electrochemical micro‐flow‐cells with integrated injection‐moulded polymer electrodes. The three electrodes (working, auxiliary, and reference) were fabricated by injection‐moulding from a conducting grade of polystyrene loaded with carbon fibers. On‐chip reference electrodes were prepared by coating one of the conducting polymer electrodes with a Ag/AgCl layer (implemented either by e‐beam evaporation of Ag followed by electrochemical formation of AgCl or by applying a Ag/AgCl paste). Working electrodes were either polymer electrodes coated with Au by e‐beam evaporation or bare conducting polymer electrodes. The electrodes were integrated into the micro‐flow‐cells by an over‐moulding process followed by ultrasonic welding. The devices were characterized by optical and electrochemical techniques. Studies by cyclic voltammetry (CV), anodic stripping voltammetry (ASV) and electrochemiluminescence (ECL) demonstrate ‘proof–of‐principle’ of the micro‐flow‐cells as electrochemical sensors.     

Gold Electrodes for Detection of Enzyme Assays with 3‐Indoxylphosphate as Substrate

The advantageous characteristics of gold not only for its electrochemical behavior but also for the unique adsorptive protein characteristics are the basis of this paper. 3‐Indoxyl phosphate (3‐IP) has previously been demonstrated to be a very convenient substrate for the electrochemical detection, using carbon‐based electrodes, of enzymeimmunoassays (EIAs) that employ not only alkaline phosphatase (AP) but also horseradish peroxidase (HRP) as label. Combination of both: gold electrodes and 3‐IP has not been studied and it produces a very suitable detection for EIAs. The electrochemical behavior of indigo, product of the enzymatic hydrolisis of 3‐IP, has been thoroughly studied for the first time on disk and band gold electrodes. The possibility of electrodepositing gold on the bands and automation has also been considered. The detection has been applied for the determination of osteocalcin with an HRP‐based ELISA (enzyme‐linked immunosorbent assay).     

Screen‐Printed Electrochemical 96‐Well Plate: a High‐Throughput Platform for Multiple Analytical Applications

A new screen‐printed electrochemical array formed by 96 three‐electrode electrochemical cells with carbon‐based working electrodes (DRP‐96X110) was developed by DropSens. The electrochemical and electro(analytical) performance of this multiple‐analysis plate is herein presented. Different proofs of concept relying on reference benchmark redox compounds, streptavidin‐biotin high affinity interactions and magnetic‐based immunoassays were carried out. The results showed the electrochemical plate versatility and usefulness as an innovative high‐throughput transducer surface for multiple and decentralized applications.     

A Self‐contained Two‐electrode Nanosensor for Electrochemical Analysis in Aqueous Microenvironments

We describe the development, fabrication, and characterization of a novel two‐electrode nanosensor contained within the tip of a needle‐like probe. This sensor consists of two, vertically aligned, carbon structures which function as individual electrodes. One of the carbon structures was modified by silver electrodeposition and chlorination to enable it to function as a pseudo‐reference electrode. Performance of this pseudo‐reference electrode was found to be comparable to that of commercially available Ag/AgCl reference electrodes. The unmodified carbon structure was employed as a working electrode versus the silver‐plated carbon structure to form a two‐electrode sensor capable of characterizing redox‐active analytes. The nanosensor was demonstrated to be capable of electrochemically characterizing the redox behavior of para‐aminophenol (PAP) in both bulk solutions and microenvironments. PAP was also measured in cell lysate to show that the nanosensor can detect small concentrations of analyte in heterogenous environments. As the working and reference electrodes are contained within a single nanoprobe, there was no requirement to position external electrodes within the electrochemical cell enabling analysis within very small domains. Due to the low‐cost manufacturing process, this nanoprobe has the potential to become a unique and widely accessible tool for the electrochemical characterization of microenvironments.     

One‐Pot Synthesis of Carbon‐Coated Nanostructured Iron Oxide on Few‐Layer Graphene for Lithium‐Ion Batteries

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li‐ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one‐pot synthesis of carbon‐coated nanostructured iron oxide on few‐layer graphene through high‐pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon‐coated iron oxide, while the graphene acts as a high‐surface‐area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative‐electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates.     

Electrochemical Glutathione Sensor Based on Electrochemically Deposited Poly‐m‐aminophenol

Preparation and characterization of electrodes suitable for determination of glutathione is reported in this study. For this poly‐m‐aminophenol (PmAP), poly‐o‐aminophenol, and poly‐p‐aminophenol were electrochemically deposited from aqueous solution on the surface of glassy carbon (GC) electrode by potential cycling in the range of +0.2–+1.0 V. The modified GC electrodes were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, contact angle measurement and ellipsometry. It was found that poly‐m‐aminophenol modified GC electrode (PmAP/GC‐electrode) is most suitable for electroanalytical determination of glutathione. An electroanalytical system for the determination of glutathione based on the PmAP/GC‐electrode was developed. The analytical system was characterized by low limit of detection, good stability, high sensitivity and wide linear detection range.     

Square Wave Stripping Voltammetry of Unlabeled Single‐ and Double‐Stranded DNAs

We show that, in difference to previously applied electrochemical methods working with stationary electrodes, square wave voltammetry produces well‐developed peaks II_SW (specific for dsDNA) and III_SW yielded by ssDNA at hanging mercury drop electrode (HMDE) and solid amalgam electrodes (SAEs). Using these peaks various kinds of DNA structural transitions can be studied, including unwinding of dsDNA at negatively charged electrode surfaces. The sensitivity of the DNA analysis is much better than that obtained with guanine oxidation signals at carbon electrodes. Both carbon electrodes and SAEs appear attractive as transducers in label‐free RNA and DNA sensors.     

Biomass‐Derived Carbon Materials as Prospective Electrodes for High‐Energy Lithium‐ and Sodium‐Ion Capacitors

Biomass‐derived carbon materials have received special attention as efficient, low‐cost, active materials for charge‐storage devices, regardless of the power system, such as supercapacitors and rechargeable batteries. In this Minireview, we discuss the influence of biomass‐derived carbonaceous materials as positive or negative electrodes (or both) in high‐energy hybrid lithium‐ion configurations with an organic electrolyte. In such hybrid configurations, the electrochemical activity is completely different to conventional electrical double‐layer capacitors; that is, one of the electrodes undergoes a Faradaic reaction, whilst the counter electrode undergoes a non‐Faradaic reaction, to achieve high energy density. The use of a variety of biomass precursors with different properties, such as surface functionality, the presence of inherent heteroatoms, tailored meso‐/microporosity, high specific surface area, various degrees of crystallization, calcination temperature, and atmosphere, are described in detail. Sodium‐ion capacitors are also discussed, because they are an important alternative to lithium‐ion capacitors, owing to the low abundance and high cost of lithium. The electrochemical performance of carbonaceous electrodes in supercapacitors and rechargeable batteries are not discussed.     

Dye‐Sensitized Solar Cell Counter Electrodes Based on Carbon Nanotubes

Dye‐sensitized solar cells (DSSCs) have received significant attention from the scientific community since their discovery in 1991. However, the high cost and scarcity of platinum has motivated researchers to seek other suitable materials for the counter electrode of DSSCs. Owing to their exceptional properties such as high conductivity, good electrochemical activity, and low cost, carbon nanotubes (CNTs) have been considered as promising alternatives to expensive platinum (Pt) in the counter electrode of DSSCs. Herein, we provide a Minireview of the CNTs use in the counter electrode of DSSCs. A brief overview of Pt‐based counter electrodes is also discussed. Particular attention is given to the recent advances of counter electrodes with CNT‐based composite structures.     

Electrochemiluminescence Based on Solid State Tri(4,7‐diphenyl‐1,10‐phenanthroline) Ruthenium(II) Ditetrakis(4‐chlorophenyl) Borate Immobilized on Carbon Fibers

A simple method for immobilization of tri(4,7‐diphenyl‐1,10‐phenanthroline) ruthenium(II) ditetrakis(4‐chlorophenyl) borate ([Ru(dpp)₃][(4‐Clph)₄B]₂) on carbon fiber electrodes was developed. Excellent electrochemical activity and electrochemiluminescence (ECL) signal of the coated carbon fiber electrodes were observed using oxalate as the co‐reactant. In addition, the effects of pH, scan rate, nitrogen and oxygen on ECL intensity were also studied. To demonstrate the reliability, the coated carbon fiber electrodes were used as ECL detectors and very low concentration of phenol was detectable (5.0×10^?8 M).     

Oxygen Reduction on Anthraquinone Diazonium Compound Derivatised Multi‐walled Carbon Nanotube and Graphene Based Electrodes

In this work, graphene and multi‐walled carbon nanotubes were derivatised with anthraquinone (AQ) groups using spontaneous or electrochemical grafting of Fast Red AL salt. Glassy carbon (GC) electrodes were coated with AQ‐modified carbon nanomaterials to study the oxygen reduction reaction (ORR). These nanomaterials were characterised by X‐ray photoelectron spectroscopy and multilayer formation of AQ on the electrografted electrodes was observed. All the modified electrodes showed enhanced electrocatalytic activity towards the ORR in alkaline media. High AQ loading on the electrodes was found and the number of electrons transferred per O₂ molecule was between 2 and 4. In addition, the stability testing of AQ‐derivatised carbon nanomaterial‐coated GC electrodes was performed.     

Graphene‐Functionalized 3D‐Carbon Fiber Electrodes – Preparation and Electrochemical Characterization

Graphene nanosheets were produced on the surface of carbon fibers by in situ electrochemical procedure including oxidative and reductive steps to yield first graphene oxide, later converted to graphene. The electrode material composed of graphene‐functionalized carbon fibers was characterized by scanning electron microscopy (SEM) and cyclic voltammery demonstrating superior electrochemical kinetics comparing with the original carbon paper. The interfacial electron transfer rate for the reversible redox process of [Fe(CN)₆]^3?/4? was found ca. 4.5‐fold higher after the electrode modification with the graphene nanosheets. The novel electrode material is suggested as a promising conducting interface for bioelectrocatalytic electrodes used in various electrochemical biosensors and biofuel cells, particularly operating in vivo.     

Siloxane‐Crown Ether Polyamide Based Electrode for Electrochemical Determination of Lead(II) in Aqueous Solution

A siloxane‐crown ether polyamide copolymer (PDMS‐PA‐DB18C6) was electrochemically investigated for fabrication of lead‐sensitive electrodes for trace analysis in aqueous solutions. The PDMS‐PA‐DB18C6 electrodes were successfully evaluated for anodic stripping voltammetric determination of lead(II) as a promising alternative for the detection of lead at ppb levels. By a judicious choice of the deposition time, electrolyte concentration and pulse amplitude, good analytical performance of the developed sensor could be achieved, with a linear response in the range of 20–700 ppb, when LOD of 3.5 ppb could be attained. This method showed a good degree of selectivity and sensitivity for lead, suitable for the determination of Pb²⁺ in wastewater sample.     

Lead Sensor Using Gold Nanostructured Screen‐Printed Carbon Electrodes as Transducers

Gold nanostructured screen‐printed carbon electrodes are demonstrated to be suitable transducers for the determination of lead using square‐wave voltammetry. Reproducible gold nanostructures have been obtained by direct electrochemical deposition. A calibration plot from 2.5 to 250 μg/L was obtained in acidic solutions of Pb(II) with a reproducibility of 4% (n=10). The detection limit was 0.09 μg/L of lead. The method is then applied to perform a blood lead analysis by adjusting square‐wave parameters in capillary or venous blood with a minimum sample pretreatment and excellent accuracy and reproducibility.     

Evaluation of Meldola Blue‐Carbon Nanotube‐Sol‐Gel Composite for Electrochemical NADH Sensors and Their Application for Lactate Dehydrogenase‐Based Biosensors

A novel MB‐SWNT‐sol‐gel nanocomposite material was prepared by the sol‐gel process incorporating a redox mediator and carbon nanotubes. The electrocatalytic properties of the nanomaterial based sensor toward NADH oxidation were studied by electrochemical measurements. Significant enhancement of oxidation current is obtained at electrodes modified by MB‐SWNT‐sol‐gel in comparison with the analogous carbon black and/or graphite composite modified electrode. The usefulness of the nanocomposite material as a matrix for immobilizing enzymes is also demonstrated. Analytical parameters of D ‐lactate biosensors with and without SWNT in the hybrid film were compared demonstrating that performance of the biosensor was significantly improved when introducing SWNT.     

Development of Electrochemical Paper‐based Glucose Sensor Using Cellulose‐4‐aminophenylboronic Acid‐modified Screen‐printed Carbon Electrode

The present work describes the fabrication of paper‐based analytical devices (μPADs) by immobilization of glucose oxidase onto the screen printed carbon electrodes (SPCEs) for the electrochemical glucose detection. The sensitivity towards glucose was improved by using a SPCE prepared from homemade carbon ink mixed with cellulose acetate. In addition, 4‐aminophenylboronic acid (4‐APBA) was used as a redox mediator giving a lower detection potential for improvement selectivity. Under optimized condition, the detection limit was 0.86 mM. The proposed device was applied in real samples. This μPAD has many advantages including low sample consumption, rapid analysis method, and low device cost.     

Electrochemical Detection of TNT at Cobalt Phthalocyanine Mediated Screen‐Printed Electrodes and Application to Detection of Airborne Vapours

We describe the use of cobalt phthalocyanine as a mediator to improve the sensitivity for the electrochemical detection of TNT. Commercial screen‐printed electrodes containing cobalt phthalocyanine were employed for determination of TNT. Improved sensitivities compared to screen‐printed carbon electrodes without phthalocyanine were observed, current response for cyclic voltammetric measurements at modified electrodes being at least double that of unmodified electrodes. A synergistic effect between oxygen and TNT reduction was also observed. Correlation between TNT concentrations and sensor output was observed between 0–200 µM TNT. Initial proof‐of‐concept experiments combining electrochemical determinations, with the use of an air‐sampling cyclone, are also reported.     

Paper‐based Electrochemical Devices Coupled to External Graphene‐Cu Nanoparticles Modified Solid Electrode through Meniscus Configuration and their Use in Biological Analysis

This paper demonstrates, for the first time, the use of paper‐based electrochemical devices coupled to external solid working electrodes. The paper‐based electrochemical cells were fabricated using inexpensive and largely available office paper, according to a simple protocol that consists on the creation of hydrophobic barriers using paraffinized paper and preheated metal stamp. The counter and reference electrodes were integrated to the paper platform through the deposition of carbon and silver inks, respectively. The electrochemical paper analytical device (ePAD) was coupled to external glassy carbon rod electrode modified with reduced graphene oxide doped with Cu nanoparticles through meniscus configuration. The analytical usefulness of this electrochemical approach was demonstrated through the simultaneous determination of paracetamol and caffeine in biological samples. The analytes were successfully quantified in real urine samples and limits of detection of 24.6 nM (paracetamol) and 36.1 nM (caffeine) were obtained. The paper platform showed good stability (RSD of 1.07 % for the peak currents and 1.43 % for the peak potentials) and satisfactory performance. The use of solid electrodes coupled to paper electrochemical devices, firstly demonstrated here, opens new possibilities for the utilization of ePADs in electrochemistry and electroanalytical chemistry and offers advantages such as the extremely reduced consumption of reagents and the minimal generation of wastes.