Electrochemical detection of propofol at the preanodized carbon electrode

Preanodized screen printed carbon electrode (SPCE) has been utilized for the detection of propofol. Here the preanodized SPCE possess the specific functional groups which help the detection and determination of propofol. The proposed SPCE shows a clear oxidation peak for the detection of propofol in pH 7.0 phosphate buffer solutions. Interestingly, it shows a well-defined individual oxidation peak for the detection of propofol in the presence interferences (mixture of ascorbic acid, dopamine, and uric acid). This type of pretreated SPCE successfully enhances the electrooxidation current and overcomes the interference effects and clearly exhibits the signals for the propofol detection using cyclic voltammetry and flow injection analysis techniques. The preanodized SPCE shows the electrooxidation signals for the propofol detection in the linear range of 0.09 to 0.90 μM, respectively. Further, the sensitivity of the proposed electrode for the propofol detection is found to be 3.6 μA μM⁻¹.     

The role of oxygen functionalities and edge plane sites on screen-printed carbon electrodes for simultaneous determination of dopamine,uric acid and ascorbic acid

The role of oxygen functionalities and edge plane sites on disposable screen-printed carbon electrodes (SPCE) was evaluated for simultaneous determination of dopamine, uric acid and ascorbic acid in this study. Both electrochemically preanodized and oxygen plasma treated SPCEs were adopted for the purpose of partially differentiating these two effects. Raman and XPS analyses verify that different treatment can indeed induce different surface characteristics. The electrocatalytic activity thereby increases by the substantial increase in surface bound carbon–oxygen functional groups and/or the generation of edge plane sites through surface reorientation. Possible mechanism is proposed to explain the voltammetric behavior. The peaks for dopamine, uric acid and ascorbic acid are especially well-resolved from each other at the electrochemically preanodized SPCE and simultaneous detection at neutral pH can thus be obtained by this simple approach.     

Electrochemical Determination of Pyrogallol at Conducting Poly(3,4‐ethylenedioxythiophene) Film‐Modified Screen‐Printed Carbon Electrodes

The electrochemical oxidation of pyrogallol at electrogenerated poly(3,4‐ethylenedioxythiophene) (PEDOT) film‐modified screen‐printed carbon electrodes (SPCE) was investigated. The voltammetric peak for the oxidation of pyrogallol in a pH 7 buffer solution at the modified electrode occurred at 0.13 V, much lower than the bare SPCE and preanodized SPCE. The experimental parameters, including electropolymerization conditions, solution pH values and applied potentials were optimized to improve the voltammetric responses. A linear calibration plot, based on flow‐injection amperometry, was obtained for 1–1000 µM pyrogallol, and a slope of 0.030 µA/µM was obtained. The detection limit (S/N=3) was 0.63 µM.     

Direct Electrochemical Sensing of Phenazine‐1‐carboxylic Acid Secreted by Pseudomonas chlororaphis subsp. aureofaciens BCRC 11057T Using Disposable Screen‐printed Carbon Electrode

A novel electrochemical approach for direct recognition of antibiotic phenazine‐1‐carboxylic acid (PCA) was developed. PCA was electropolymerized on preanodized screen‐printed carbon electrode (SPCE*‐PCA) through repetitive cyclic voltammetry and characterized by XPS and FESEM. Electron transfer involved intermediate phenomenon of diffusion‐controlled redox process and surface bound redox reaction. At pH 8 (optimum), SPCE*‐PCA had a detection limit of 0.51±0.04 μM, a quantification limit of 1.7±0.13 μM, linearity of up to 50 µM, a repeatability of 15.5 % and a reproducibility of 1.7 %. PCA secreted by Pseudomonas chlororaphis subsp. aureofaciens BCRC 11057^T was investigated successfully using present single run approach.     

Biomolecule-free,selective detection of clenbuterol based on disposable screen-printed carbon electrode

We report here the development of a selective clenbuterol sensor made of disposable screen-printed carbon electrode (SPCE) without the need of adding any biorecognition element. Good analytical performance was achieved through the proper function of both the oxygen functionalities and edge plane sites on the “preanodized” SPCE (SPCE*). It is the amino group of clenbuterol to effectively form hydrogen bond with the SPCE* to induce the adsorption of clenbuterol. The edge plane sites enhance the electron transfer process and further help the dimer formation of clenbuterol to generate electroactivity for analysis. Square wave voltammetry was applied to increase the detection sensitivity with a linear response in the range of 7–1000 ppb and a detection limit of 0.51 ppb (S/N = 3). In the real sample analysis, results observed were satisfactory with meat, human blood, and human urine. High reproducibility in sensor fabrication further favors the disposable purpose of applications.     

Polyaniline Sheathed Black Phosphorous: A Novel,Advanced Platform for Electrochemical Sensing Applications

Despite its excellent properties, the inherent unstable nature of black phosphorus (BP) in ambient atmosphere has severely restricted its use in electrochemical sensing applications. In this work, polyaniline (PANI) sheathed BP was prepared via the electrochemical polymerisation of aniline on BP coated screen printed carbon electrode (i. e., SPCE/BP) which resulted in an efficient, stable electrochemical platform (i. e., SPCE/BP@PANI) with improved properties which was evaluated for electrochemical detection of two model bioanalytes namely, ascorbic acid (AA) and Hydrazine (Hy). The formation of PANI on the SPCE/BP exhibited a pair of stable and well‐defined redox peaks indicating the better adsorption energy and fast electron transfer nature of BP as compared to other 2D materials like graphene and transitional metal dichalcogenides. FESEM and XPS studies revealed the formation and uniform growth of PANI on BP surface without any aggregation. Electrochemical impedance spectroscopy analyses revealed that SPCE/BP@PANI can act as a suitable electrocatalyst material for the sensing of AA and Hy. Thus, SPCE/BP@PANI electrode exhibited low limit of detection (D_L; 1.69 μM), excellent reproducibility and better selectivity towards AA oxidation over glucose, sucrose, urea, citric acid, sodium, nitrate, nitrite and magnesium with a sensitivity of 3.38 A M^?1 cm^?2 (R²=0.98) in the dynamic range of 10–1100 μM. The excellent analytical performance of the BP@PANI is plausible due to better adsorption energy and fast electron transfer of BP. Further, SPCE/BP@PANI was also used for successful detection of AA in processed fruit juice with good recovery. Under the optimal DPV conditions, the modified electrode was extended for detection of Hy in a linear range of 100–1500 μM with sensitivity of 0.09 A M^?1 cm^?2 (R²=0.99) and D_L=89 μM validating the potential of BP based composites in wide range of electrochemical applications.     

Uric Acid Determination by Adsorptive Stripping Voltammetry on Multiwall Carbon Nanotubes Based Screen‐Printed Electrodes

A sensitive electroanalytical methodology for the determination of uric acid in real samples using adsorptive voltammetry at a multiwalled carbon nanotubes (MWCNT) modified screen printed electrode (SPCE) is presented. Adsorption of uric acid takes place at open circuit potential at an optimized pH 5.0. Studies about the effect of accumulation time and scan rate on the analytical signal were developed and confirm the adsorption nature of the electrodic process. Quantitative analysis of uric acid by using its oxidation process at +0.18 V (vs. an Ag pseudoreference electrode) was carried out with an accumulation time of 5 min. Thus, a linear voltammetric based reproducible determination of uric acid (RSD 5 %) in the range 1–100 µM was obtained. The method was then successfully used for the determination of uric acid in real clinical samples of urine without detection of interferences. The proposed methodology only requires a dilution of the real sample and present advantages as low cost and easy handling for non specialized technicians.     

Electrochemical Detection of Melamine

Poly(caffeic acid) polymer was immobilized onto the surface of a glassy carbon electrode via electropolymerization. Voltammetry shows a signal related to the two‐electron oxidation of the immobilized hydroquinone groups in the caffeic acid monomer units. The modified electrode in aqueous solution shows complexation of the electrogenerated o‐quinone species with melamine thus allowing in the electrochemical detection of melamine by recording the shift in potential of the oxidation signal of the polymer. Melamine detection was investigated in pure aqueous solutions and in the presence of milk powder solutions and the proposed analytical method of melamine detection in milk powder was applied successfully with an average recovery of ca. (91±7.9)%.     

Feasibility Study of Biosensors Based on Polymelamine‐modified Screen‐printed Carbon Electrodes

We herein report the use of melamine and a low‐cost screen‐printed carbon electrode (SPCE) as the base matrices for the preparation of an electrochemical biosensor. Following the electrochemical polymerization of melamine, the resulting polymelamine was deposited on the SPCE surface to give layers bearing –NH₂ functional groups, which allowed the attachment of anti‐IgE (immunoglobulin E) antibodies. The resulting anti‐IgE‐labeled SPCEs were then incubated with IgE solutions of various concentrations prior to analysis by chronoamperometry using Ru(NH₃)₆³⁺ as an electrochemical mediator. A logarithmic relationship was observed between the chronoamperometric current and the IgE concentration between 5.3 and 530 fM (i. e. over 2 orders of magnitude). In addition, a detection limit of 0.64 fM was achieved in addition to a recovery of 114 ± 14 % for a fetal bovine serum sample spiked with 16 fM IgE. Furthermore, only a small quantity of sample was required for analysis, and the IgE assay was suitable for use in a complex serum matrix without interference. We therefore expect that this novel system will be useful for monitoring the changes in blood IgE levels during the clinical treatment of allergic asthma and rhinitis.     

Reduction of the interferences of biochemicals and hematocrit ratio on the determination of whole blood glucose using multiple screen-printed carbon electrode test strips

A practical approach to reduce the interferences of biochemicals and hematocrit ratio (Hct%) in the determination of whole blood glucose using multiple screen-printed carbon electrode (SPCE) test strips is described. SPCE test strips with and without glucose oxidase [i.e., GOD(+)-SPCEs and GOD(-)-SPCEs] were used and the chronoamperometric currents of test glucose solutions with various spiked uric acid concentrations and Hct% were measured. By establishing the interference relationships between glucose concentrations and uric acid concentrations as well as Hct% values and with appropriate corrections, the whole blood glucose determinations could be made to be more accurate and comparable to those determined by the reference YSI method. Specifically, the use of the ΔI value, i.e., the current difference between GOD(+)-SPCE and GOD(-)-SPCE measurements, would reduce most of the uric acid/biochemical interferences. An interpolation method was also established to correct for the glucose determinations with Hct% interferences. The Hct% corrections using the interpolation method are especially important and necessary for those blood samples with glucose concentrations higher than 110 mg dL^-1 and Hct% values lower than 35%. This approach should also be applicable to other biochemical determinations using similar electrochemical techniques. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cobalt nanoparticles anchored to porous silicon as a novel modifier for the construction of enzyme‐free hydrogen peroxide screen‐printed sensor

In this work, a screen‐printed carbon electrode (SPCE) was modified with a cobalt/porous silicon (Co@PSi) nanocomposite powder to develop a nonenzymatic sensor for the detection of hydrogen peroxide. The Co@PSi nanocomposite was synthesized through the chemical reaction between silicon powder in a HF/HNO₃ solution and cobalt cations. In this process, cobalt nanoparticles were anchored on the porous silicon. The structure and morphology of the synthesized nanocomposite were investigated by X‐ray diffraction, Fourier transform infrared spectroscopy, X‐ray photoemission spectroscopy, energy dispersive X‐ray spectroscopy, and field‐emission scanning electron microscopy. The constructed nonenzymatic, screen‐printed sensors based on the Co@PSi nanocomposite showed perfect electrocatalytic oxidation response to hydrogen peroxide over the range 1–170 and 170–3,770 μmol/L with the limit of detection of 0.8 μmol/L. In addition, the Co@PSi‐SPCE sensor exhibited good selectivity for the determination of H₂O₂ in the presence of common interfering species including glucose, ascorbic acid, uric acid, dopamine, nitrate, and nitrite ions. The constructed electrochemical sensor was successfully used for the determination of H₂O₂ in real samples.     

Picomolar Detection of Melamine Using Molecularly Imprinted Polymer‐Based Electrochemical Sensors Prepared by UV‐Graft Photopolymerization

Molecularly imprinted polymer (MIP) films of melamine were prepared by photopolymerization of vinylic monomers on diazonium‐modified gold electrodes. The gold‐grafted MIPs are specific and selective for melamine in either organic or aqueous media. The interferent molecules cyromazine and cyanuric acid were not recognized by the MIPs. The limit of detection was as low as 1.75×10^?12 mol L^?1 at S/N=3. Efficiency of melamine rebinding is related to the solubility parameter of the organic solvent or pH and ionic strength of the aqueous medium. It is concluded that diazonium salts permit to design robust electrochemical MIP sensors.     

Naked eye sensing of melamine using rationally tailored gold nanoparticles: hydrogen-bonding and charge-transfer recognition

A highly sensitive analytical method based on Au nanoparticles rationally tailored with recognition elements uracil-5-carboxylic acid (UCA) and 2,4,6-trinitrobenzenesulfonic acid (TNBS) for the visual sensing of melamine at the parts-per-billion (ppb) level is described. The tailored Au nanoparticles function as an excellent color indicating reporter and it recognizes the target analytes by triple hydrogen-bonding or charge-transfer interaction in aqueous solution. The interaction of melamine with UCA- or TNBS-tailored reporters induces a rapid visible color change due to the aggregation of reporters. The color change was spectrally monitored to precisely quantify the amount of melamine. The charge-transfer interaction of melamine with TNBS-tailored reporter brings a remarkable change in the spectral signature even at the ppb level. Such an interaction paves the way for the detection of melamine at the 5 ppb level, which is well below the safety limit set by UN food standard commission. This method is highly selective and the common interfering analytes such as cyanuric acid, cytosine, glucose, thymine, uracil, etc., do not interfere in the sensing of melamine. The practical utility of the method is demonstrated by quantifying the amount melamine in real samples.     

A Robust Electrochemical Sensor Based on Butterfly-shaped Silver Nanostructure for Concurrent Quantification of Heavy Metals in Water Samples

Heavy metals in drinking water have become a severe threat to human health. Detection of heavy metals has been achieved by electrochemical sensors that are modified with complex nanocomposites; however, reproducibility of these sensors is still a big challenge when applied in commercial settings. Here, a simple, very robust, and sensitive electrochemical sensor based on a screen-printed carbon electrode modified with butterfly-shaped silver nanostructure (AgNS/SPCE) has been developed for the concurrent determination of cadmium (II), lead (II), copper (II), and mercury (II) in water samples. The electrochemical behavior of the modified electrodes was investigated using cyclic voltammetry and differential pulse anodic stripping voltammetry. The AgNS/SPCE showed distinct peak potentials and a significant increase in the peak currents for all heavy metals, attributed to the high electrical conductivity and electrocatalytic activity of the synthesized butterfly-shaped AgNS. Moreover, the excellent stability and sensitivity towards simultaneous quantification of heavy metals have been obtained with detection limits of 0.4 ppb, 2.5 ppb, 7.3 ppb, and 0.7 ppb for Cd (II), Pb (II), Cu (II), and Hg (II), respectively. Besides, the constructed sensor was successfully applied to simultaneously quantify target heavy metals in spiked water samples. Owing to excellent sensitivity, high robustness, affordability, and fast response, the presented electrochemical sensor could be incorporated into a portable and miniaturized potentiostat device, making it a promising method for on-site water analysis.     

Voltammetric Determination of Urinary 1‐Hydroxypyrene Using Molecularly Imprinted Polymer‐Modified Screen‐Printed Carbon Electrodes

A two step non‐competitive affinity method for the trace determination of 1‐hydroxypyrene (1‐OHP) using a disposable molecularly imprinted polymer (MIP) modified screen‐printed carbon electrode (MIP‐SPCE) has been developed. The MIP was synthesized according to a novel strategy, which is described, and is capable of rebinding the phenolic analyte, 1‐hydroxypyrene (1‐OHP), from high pH aqueous organic media, via ionic interactions. In the first step of our method 1‐OHP was accumulated at the MIP‐SPCE from 35% aqueous methanol containing 0.014 M NaOH and 0.14 M NaCl, at open circuit. In the second step, the resulting SPCE with accumulated 1‐OHP was then transferred to fresh, clean phosphate buffered aqueous methanol, and subjected to cyclic voltammetry (CV) or differential pulse voltammetry (DPV). The latter technique proved to be more sensitive at detecting 1‐OHP, with a limit of detection of 182 nM and a linear range to 125 μM on unmodified electrodes. The possible effects of interference by related phenolic compounds in the MIP‐SPCE of 1‐OHP were investigated. Finally the method was evaluated by carrying out 1‐OHP determinations on spiked human urine samples; the recovery of 1‐OHP was 79.4% and the coefficient of variation was found to be 7.7% (n= 4) using a separate MIP‐SPCE for each determination. Therefore, the performance data suggests that the method is reliable at the concentrations examined in this study. The method was found to be superior to the direct determination of 1‐OHP in human urine by DPV alone, which was greatly affected by interference from uric acid.     

Membrane sampling with microdialysis coupled to HPLC/UV for on-line simultaneous determination of melamine and cyanuric acid in non-dairy coffee creamer

An on-line microdialysis/high-performance liquid chromatography method was developed for the simultaneous determination of melamine and cyanuric acid in non-dairy coffee creamer. To collect these analytes from aqueous samples, the microdialysis system featured a microdialysis probe incorporating a polyarylethersulfone membrane and employed 0.05 M HCl in 0.1% (v/v) MeOH as the perfusate, with optimal efficiency obtained at a flow rate of 1 μL min(-1). The chromatographic conditions were optimized when using a reverse-phase phenyl column and a mobile phase of phosphate buffer solution in 10% (v/v) MeOH, buffered at pH 3.0. Good linearity relationship (r(2) > 0.9987), intra- and inter-day precisions (RSDs < 6.6%), recoveries (96.9 - 105.0%), and limits of detection (melamine, 3 ppb; cyanuric acid, 150 ppb) were observed for the two analytes. This method has been successfully applied to simultaneous determination of melamine and cyanuric acid in commercial creamers with the recoveries in the range of 97.5 to 102.6%.     

Urinary Uric Acid Determination by Reversed-Phase High-Performance Liquid Chromatography with Electrochemical Detection

Abstract

Determination of urinary uric acid has been attempted by reversed-phase high-performance liquid chromatography with electrochemical detection. We have found that the electrochemical detection method is suitable for monitoring eluate from reversed-phase column and also that the minimum detectable quantity of uric acid using en electrochemical detector is about 10 pg. Complete separation of uric acid was achieved in about 8 min under the present chromatographic conditions.     

Fluorographites (CFx)n Exhibit Improved Heterogeneous Electron‐Transfer Rates with Increasing Level of Fluorination: Towards the Sensing of Biomolecules

Halogenated sp² materials are of high interest owing to their important electronic and electrochemical properties. Although methods for graphite and graphene fluorination have been extensively researched, the fundamental electrochemical properties of fluorinated graphite are not well established. In this paper, the electrochemistry of three fluorographite materials of different carbon‐to‐fluorine ratio were studied: (CF_0.33)_n, (CF_0.47)_n, and (CF_0.75)_n. Our findings reveal that the carbon‐to‐fluorine ratio of fluorographite will impact the electrochemical performance. Faster heterogeneous electron‐transfer (HET) rates and lowered oxidation potentials for ascorbic acid and uric acid are progressively obtained with increasing fluorine content. The fluorographite (CF_0.75)_n was in fact found to exhibit the most improved electrochemical performances with the fastest HET rates and significantly lowered overpotentials in the oxidation of ascorbic acid. Analytical parameters such as sensitivity and linearity were subsequently investigated by applying the fluorographite (CF_0.75)_n in the analysis of ascorbic acid and uric acid, which can be simultaneously detected. We determined good linear responses towards the detection of both ascorbic and uric acid. Fluorographites outperform graphites in sensing applications, which will have a profound impact on applications of fluorographites and fluorographene in sensing and biosensing.     

Electrochemical sensing of melamine with 3,4-dihydroxyphenylacetic acid as recognition element

A new electrochemical sensor for melamine with 3,4-dihydroxyphenylacetic acid as the recognition element is established. The results of Fourier Transform Infrared (FT-IR) spectra demonstrate that melamine may interact with 3,4-dihydroxyphenylacetic acid to form a complex mainly through the hydrogen-bonding interaction. The electrochemical behavior of 3,4-dihydroxyphenylacetic acid in the presence of melamine was studied. The anodic peak currents of 3,4-dihydroxyphenylacetic acid obtained by differential pulse voltammetry are linear with the logarithm of melamine concentrations in the range from 1.0 × 10⁻⁸ to 5.0 × 10⁻⁶ M with a linear coefficiency of 0.997. The detection limit is 3.0 × 10⁻⁹ M. The proposed method displayed an excellent sensitivity and was successfully applied to the determination of melamine in milk products.     

Colorimetric recognition of melamine in milk using novel pincer zinc complex stabilized gold nanoparticles

A convenient colorimetric approach for visual detection of melamine in raw milk was realized by using gold nanoparticles (AuNPs) stabilized by an unsymmetrical terpyridyl zinc complex with a thymine fragment at one terminal and a quaternary ammonium salt at the other. Even without pre-addition of melamine or relative additives, obvious color change from red to blue was observed by naked eye in the presence of trace amount of melamine, which was attributed to the alternation of aggregation state of AuNPs caused by the selective binding between the thymine fragment and melamine via triple hydrogen-bonding interactions. Remarkably, the detection limit for melamine was as low as 2.4 ppb, providing a highly sensitive and efficient approach for the visual detection of melamine.