Highly Enantioselective Intramolecular 1,3‐Dipolar Cycloaddition: A Route to Piperidino‐Pyrrolizidines

Enantioselective catalytic intermolecular 1,3‐dipolar cycloadditions are powerful methods for the synthesis of heterocycles. In contrast, intramolecular enantioselective 1,3‐dipolar cycloadditions are virtually unexplored. A highly enantioselective synthesis of natural‐product‐inspired pyrrolidino‐piperidines by means of an intramolecular 1,3‐dipolar cycloaddition with azomethine ylides is now reported. The method has a wide scope and yields the desired cycloadducts with four tertiary stereogenic centers with up to 99 % ee. Combining the enantioselective catalytic intramolecular 1,3‐dipolar cycloaddition with a subsequent diastereoselective intermolecular 1,3‐dipolar cycloaddition yielded complex piperidino‐pyrrolizidines with very high stereoselectivity in a one‐pot tandem reaction.     

1,3‐Dipolar Cycloadditions of α‐Diazo Ketones Derived from N‐Protected (S)‐Proline with Aromatic and Cycloaliphatic Thioketones

Enantiomerically pure α‐oxo diazo compounds derived from (S)‐proline were used for 1,3‐dipolar cycloaddition with aryl and hetaryl thioketones, as well as with cycloalkanethiones. Whereas the reactions with hetaryl thioketones in boiling THF yield α,β‐unsaturated ketones via a cascade of cycloaddition, 1,3‐dipolar electrocyclization, and desulfurization, the analogous reactions with thiobenzophenone and cycloalkanethiones result in the formation of 1,3‐oxathiole derivatives. In the latter case, the 1,5‐dipolar electrocyclization of the intermediate thiocarbonyl ylide is the key step of the reaction sequence. In all cases, the isolated products are optically active, i.e., the multistep processes occur with retention of the stereogenic center incorporated via the use of (S)‐proline as the precursor of the diazo compounds.     

Synthesis of N1-Substituted 1,2,3,6-Tetrahydropyrimidin-2-ones via an Unexpected Reaction of Thiazolo[3,2-a]-pyrimidine Derivatives and Nitrile Oxide

A new class of N1‐substituted 1,2,3,6‐tetrahydropyrimidin‐2‐ones was prepared in moderate yields by the reaction of nitrile oxide with thiazolo[3,2‐a]pyrimidine derivatives via a domino 1,3‐dipolar cycloaddition/ring‐opening/ substitution process. The structures of the products were characterized thoroughly by IR, elemental analysis, MS, NMR together with X‐ray crystallographic analysis.     

Diversity Oriented Synthesis of Indoloazepinobenzimidazole and Benzimidazotriazolobenzodiazepine from N1‐Alkyne‐1,2‐diamines

A one‐pot protocol for the diversity oriented synthesis of two N‐polyheterocycles indoloazepinobenzimidazole and benzimidazotriazolobenzodiazepine from a common N¹‐alkyne‐1,2‐diamine building block is described. The approach involves sequential formation of benzimidazole through cyclocondensation and oxidation, which is followed by the formation of either an azepine ring (through alkyne activation and 6‐endo‐dig cyclization, 1,2‐migration with ring expansion, and re‐aromatization), or diazepine and triazole rings through 1,3‐dipolar cycloaddition.     

Synthesis of dispiro[oxindole‐pyrrolidine]‐thiazolo[3,2‐a][1,3,5]triazines by 1,3‐dipolar cycloaddition

The 1,3‐dipolar cycloaddition of an azomethine ylide generated by a decarboxylative route from sarcosine and isatin to 7‐arylmethylidene‐3‐aryl‐3,4‐dihydro‐2H‐thiazolo[3,2‐a][1,3,5]triazin‐6(7H)‐ones afforded novel dispiro[oxindole‐pyrrolidine]‐thiazolo[3,2‐a][1,3,5]triazines in moderate yields. The structures of the products were determined and characterized thoroughly by NMR, MS, IR, and elemental analysis. The results of experiment indicated that this 1,3‐dipolar cycloaddition proceeded with high stereoselectivity and regioselectivity. J. Heterocyclic Chem., (2011).     

Quinolone analogues 7 [1‐6]. Synthesis of 3‐Heteroaryl‐1‐methylpyridazino[3,4‐b]quinoxalin‐4(1H)‐ones

The 3‐heteroaryl‐1‐methylpyridazino[3,4‐b]quinoxalin‐4(1H)‐ones 6a‐e were synthesized by the oxidative‐hydrolytic ring transformation of the 3‐heteroaryl‐1,2‐diazepino[3,4‐b]]quinoxaline‐5‐carbonitriles 9a‐c , which were obtained by the 1,3‐dipolar cycloaddition reaction of the 2‐(2‐heteroarylmethylene‐1‐methylhydrazino)quinoxaline 4‐oxides with 2‐chloroacrylonitrile. The assignment of the thiophene and furan ring protons was carried out through the data of the NOE, decoupling, and coupling constants.     

Reactions of 2‐Unsubstituted 1H‐Imidazole 3‐Oxides with 2,2‐Bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile: A Stepwise 1,3‐Dipolar Cycloaddition

The reaction of 1,4,5‐trisubstituted 1H‐imidazole‐3‐oxides 1 with 2,2‐bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile ( 7 , BTF) yielded the corresponding 1,3‐dihydro‐2H‐imidazol‐2‐ones 10 and 2‐(1,3‐dihydro‐2H‐imidazol‐2‐ylidene)malononitriles 11 , respectively, depending on the solvent used. In one example, a 1 : 1 complex, 12 , of the 1H‐imidazole 3‐oxide and hexafluoroacetone hydrate was isolated as a second product. The formation of the products is explained by a stepwise 1,3‐dipolar cycloaddition and subsequent fragmentation. The structures of 11d and 12 were established by X‐ray crystallography.     

氟烷基叠氮化合物和缺电子烯烃反应的研究

本论文研究了氟烷基叠氮化合物和缺电子烯烃的1,3-偶极反应, 合成了一系列含氟烷基三唑啉和氟烷基吡唑啉类化合物, 并提出了一个通过开环和以重氮化合物为中间体的反应机理.     

An Approach to the Synthesis of Spiro[indene‐pyridoisoquinoline] Derivatives via 1,4‐Dipolar Cycloaddition of Isoquinoline and Acetylene Esters,and (1,3‐Dihydro‐1,3‐dioxo‐2H‐inden‐2‐ylidene)malononitrile

A concise and efficient approach to the spiro‐tetrahydroisoquinoline derivatives has been developed by 1,4‐dipolar cycloaddition of zwitterions resulting from isoquinoline and acetylene esters and (1,3‐dihydro‐1,3‐dioxo‐2H‐inden‐2‐ylidene)malononitrile in MeCN at room temperature. The significance of this method lies in good yields and ease of product purification, and no inert atmosphere is required. The structures of the products were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme).     

Stereoselective Synthesis of 1,2,3‐Triazolooxazine and Fused 1,2,3‐Triazolo‐δ‐Lactone Derivatives

The stereoselective synthesis of 1,2,3‐triazolooxazine and fused 1,2,3‐triazolo‐δ‐lactone by applying chemoenzymatic methods is described. trans‐2‐Azidocyclohexanol was successfully resolved by Novozyme 435 with an ee value of 99%. Installation of the alkyne moiety on the enantiomerically enriched azidoalcohol by O‐alkylation, followed by intramolecular azide? alkyne [3+2] cycloaddition resulted in the desired 1,2,3‐triazolooxazine derivative. Enantiomerically pure azidocyclohexanol was also subjected to the Huisgen 1,3‐dipolar cycloaddition reaction with dimethylacetylene dicarboxylate, followed by intramolecular cyclization of the corresponding cycloadduct, to furnish a fused 1,2,3‐triazolo‐δ‐lactone.     

Synthesis of Dispiro[indole‐3,2′‐pyrrolidine‐3′,2″‐pyrrolizine]‐1″,2(1H)‐diones via Azomethine Ylide 1,3‐Dipolar Cycloaddition

The 1,3‐dipolar cycloaddition of azomethine ylide generated in situ from isatin and sarcosine to 2‐arylmethylidene‐2,3‐dihydro‐1H‐pyrrolizin‐1‐ones afforded novel 1′‐methyl‐4′‐(aryl)‐1″H‐dispiro[indole‐3,2′‐pyrrolidine‐3′,2″‐pyrrolizine]‐1″,2(1H)‐diones in good yields. The structures of all the products were characterized thoroughly by NMR, infrared spectroscopy, mass spectrum, and elemental analysis.     

1,5‐Dipolar Electrocyclizations of Thiocarbonyl Ylides Bearing CN Groups: Reactions of N‐[(Dimethylamino)methylene]thiobenzamide and 2‐(Dimethylhydrazono)‐1‐phenylethane‐1‐thione with Diazo Compounds

The reactions of thiobenzamide 8 with diazo compounds proceeded via reactive thiocarbonyl ylides as intermediates, which underwent either a 1,5‐dipolar electrocyclization to give the corresponding five membered heterocycles, i.e., 4‐amino‐4,5‐dihydro‐1,3‐thiazole derivatives (i.e., 10a, 10b, 10c , cis‐ 10d , and trans‐ 10d ) or a 1,3‐dipolar electrocyclization to give the corresponding thiiranes as intermediates, which underwent a S_Ni′‐like ring opening and subsequent 5‐exo‐trig cyclization to yield the isomeric 2‐amino‐2,5‐dihydro‐1,3‐thiazole derivatives (i.e., 11a, 11b, 11c , cis‐ 11d , and trans‐ 11d ). In general, isomer 10 was formed in higher yield than isomer 11 . In the case of the reaction of 8 with diazo(phenyl)methane ( 3d ), a mixture of two pairs of diastereoisomers was formed, of which two, namely cis‐ 10d and trans‐ 10d , could be isolated as pure compounds. The isomers cis‐ 11d and trans‐ 11d remained as a mixture. In the reactions of the thioxohydrazone 9 with diazo compounds 3b and 3d , the main products were the alkenes 18 and 23 , respectively. Their formation was rationalized by a 1,3‐dipolar electrocyclization of the corresponding thiocarbonyl ylide and subsequent desulfurization of the intermediate thiiran. As minor products, 2,5‐dihydro‐1,3‐thiazol‐5‐amines 21 and 24 were obtained, which have been formed by 1,5‐dipolar electrocyclization of the thiocarbonyl ylide, followed by a 1,3‐shift of the dimethylamino group.     

Synthesis,Characterization, and thermoresponsive properties of Helical Polypeptides Derivatized from Poly(γ−4‐(3‐chloropropoxycarbonyl)benzyl‐L‐glutamate)

A series of side‐chain‐functionalized α‐helical polypeptides, i.e., poly(γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamate) (6) have been prepared from n‐butylamine initiated ring‐opening polymerization (ROP) of γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamic acid‐based N‐carboxyanhydride. Polypeptides bearing oligo‐ethylene‐glycol (OEG) groups or 1‐butylimidazolium salts were prepared from 6 via copper‐mediated [2+3] alkyne‐azide 1,3‐dipolar cycloaddition or nuleophilic substitution, respectively. CD and FTIR analysis revealed that the polymers adopt α‐helical conformations both in solution and the solid state. Polymers bearing OEG (m = 3) side‐chains showed reversible LCST‐type phase transition behaviors in water while polymers bearing 1‐butylimidazolium and I^? counter‐anions exhibited reversible UCST‐type transitions in water. Variable‐temperature UV‐vis analysis revealed that the phase transition temperatures (T_pts) were dependent on the main‐chain length and polymeric concentration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2469–2480     

Synthesis and Anti‐HIV Activity of Triazolo‐Fused,Medium‐Sized Cyclic Nucleoside Analogs Prepared by an Intramolecular Huisgen 1,3‐Dipolar Cycloaddition

Medium‐sized cyclic nucleosides containing a fused triazole ring were synthesized via intramolecular Huisgen 1,3‐dipolar cycloadditon reaction. 2′,3′‐seco‐Uridine was employed as the key intermediate for the introduction of azido and alkynyl moieties in the defined positions of the reaction precursors. The cycloaddition reactions were achieved in high yields by heating the precursor in refluxing toluene. The uracil base in these target compounds was successfully transformed to the corresponding cytosine. The synthesized compounds were evaluated in a MAGI assay for their anti‐HIV activities, and in a H9 T lymphocytes assay for their cell toxicities.     

Study of Regiochemical Trends During the Synthesis of Furan and 5‐(p‐chlorophenyl)Furan Containing Novel Spiropyrrolidine Library Through 1,3‐dipolar Cycloaddition Reactions

A new class of functionalized furan and 5‐(p‐chlorophenyl)furan containing spiropyrrolidines has been synthesized in moderate to excellent yields by the one‐pot, three‐component 1,3‐dipolar cycloaddition reaction of in situ generated azomethine ylides with various furan/aryl furan‐substituted chalcones as dipolarophiles. The effect of electron deficient substituents at the fifth position of the furan ring in the chalcone on the regiochemistry of the cycloaddition formed was studied. The structures of the newly synthesized cycloaddicts were proved by analytical and spectral data.     

A Novel ‘Domino‐Click Approach’ to Unsymmetrical Bis‐1H‐1,2,3‐triazoles

Aryl azides 1 were treated with allenylmagnesium bromide ( 2 ) to generate 1,5‐disubstituted butynyl‐1H‐1,2,3‐triazoles 3 in a domino fashion, which upon Cu^I‐catalyzed 1,3‐dipolar cycloaddition with aryl azides 4 afforded novel bis‐1H‐1,2,3‐triazoles 5 in quantitative yields (Scheme 1 and Table).     

Reactions of Diazomethanes with 5‐Benzylidene‐3‐phenylrhodanine – A Computational Study

It has been shown previously that the reaction of diazomethane with 5‐benzylidene‐3‐phenylrhodanine ( 1 ) in THF at ?20° occurs at the exocyclic C?C bond via cyclopropanation to give 3a and methylation to yield 4 , respectively, whereas the corresponding reaction with phenyldiazomethane in toluene at 0° leads to the cyclopropane derivative 3b exclusively. Surprisingly, under similar conditions, no reaction was observed between 1 and diphenyldiazomethane, but the 2‐diphenylmethylidene derivative 5 was formed in boiling toluene. In the present study, these results have been rationalized by calculations at the DFT B3LYP/6‐31G(d) level using PCM solvent model. In the case of diazomethane, the formation of 3a occurs via initial Michael addition, whereas 4 is formed via [3+2] cycloaddition followed by N₂ elimination and H‐migration. The preferred pathway of the reaction of 1 with phenyldiazomethane is a [3+2] cycloaddition, subsequent N₂ elimination and ring closure of an intermediate zwitterion to give 3b . Finally, the calculations show that the energetically most favorable reaction of 1 with diphenyldiazomethane is the initial formation of diphenylcarbene, which adds to the S‐atom to give a thiocarbonyl ylide, followed by 1,3‐dipolar electrocyclization and S‐elimination.     

1,3‐Dipolar cycloadditions of 9‐diazofluorenes and diphenyldiazomethane to 2‐acyl‐2H‐1,2,3‐diazaphospholes

A series of 2‐acyl‐2H‐1,2,3‐diazaphospholes 3 underwent ready 1,3‐dipolar cycloaddition reactions with 9‐diazofluorenes as the 1,3‐dipole, yielding the respective bicyclic phosphiranes 5 or trimers 7 depending on the reaction conditions employed. The reaction is believed to proceed via the formation of the [3+2]‐cycloaddition adducts followed by elimination of nitrogen from the cyclic azo moiety. In the case of 3c , the phosphatetraazabicyclooctadiene compound 6 has been isolated with no loss of nitrogen. Likewise, the dipolar cycloaddition reaction of diphenyldiazomethane with the >C?P‐ moiety as the 1,3‐dipolarophile gave phosphadiazabicyclohexenes 8 in 32–68% yields.     

Catalytic Asymmetric Construction of Quaternary α‐Amino Acid Containing Pyrrolidines through 1,3‐Dipolar Cycloaddition of Azomethine Ylides to α‐Aminoacrylates

The first catalytic enantioselective 1,3‐dipolar cycloaddition of azomethine ylides to α‐aminoacrylate catalyzed by a AgOAc/ferrocenyl oxazolinylphosphine (FOXAP) system was developed, which exhibits excellent exo‐ and enantioselectivity (92–99 % ee). This process provides efficient access to useful 4‐aminopyrrolidine‐2,4‐dicarboxylic acid (APDC)‐like compounds containing a unique quaternary α‐amino acid unit.     

Reversible 1,3‐dipolar cycloaddition of dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate with dimethyl acetylenedicarboxylate

It was shown that dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate ( 2 ) and dimethyl acetylenedicarboxylate (DMAD) undergo a 1,3‐dipolar cycloaddition to produce a short‐lived ylide intermediate ( 3 ). The 1,3‐dipolar cycloaddition took place even at room temperature, although sluggishly, but took place much more rapidly under application of a high pressure of 500 MPa. The 1,3‐dipolar cycloaddition is reversible and the ylide 3 immediately splits into 2 and DMAD. When the reaction of 2 with DMAD was carried out at room temperature without solvent, a spiro‐1,3‐dithiole ( 11 ) was formed in 11% yield, whereas the reaction at 150°C provided a thiophene derivative ( 13 ) in 41% yield. It was found that 11 undergoes a thermal rearrangement to 13 . Results of attempted chemical trapping of the ylide 3 are also reported. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:434–440, 2000